SEARCH · Search NASA

Results for “lunar ejecta”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

NASA NTRS2021

Preliminary Considerations for Microwave Consolidation/Sintering of Lunar Regolith Simulant

As NASA prepares to establish permanent habitats on the Moon, a significant first stepis to be able to land multiple times in the same area. As was consistently shown during the Apolloprogram, the very fine granular structure of the lunar regolith (the Moon’s “soil”) poses significantphysical and health challenges [1]. One of the most concerning is the hyper-velocity lunarsurface ejecta that results from the engine exhaust that exits the rocket as it lands and takes off[2]. It has been determined that to mitigate this, the regolith must be consolidated.

Shulman, Holly↗

NASA NTRSDate not supplied

Directed Illumination of Sunlight Collimated and Observed Beneath a Lunar Lander (DISCOBaLL): Structured Illumination For a Lunar Surface Photogrammetry System

A lighting system has been developed to provide structured illumination allowing photogrammetry to be performed during and after landing on extraterrestrial bodies. The system, known as Directed Illumination of Sunlight Collimated and Observed Beneath a Lunar Lander (DISCOBaLL), provides patterned lighting suitable for two- and multiple-camera photogrammetry, allowing several different measurements to be obtained including pre-landing terrain shape, visualization and localization of the ejecta sheet during landing, and post-landing terrain shape enabling quantitative measurement of plume-induced cratering. The paper explains the methodology of designing the DISCOBaLL, describes multiple prototypes, and shows the performance of these prototypes using actual solar radiation in a laboratory setting.

Lunar Regolith↗

NASA NTRS1975

Flows of impact melt at lunar craters

Lavalike materials that were emplaced in a fluid state occur in and around lunar impact craters whose diameters range from 3 km to more than 200 km and whose ages span a time interval of at least 3.5 billion years. The distribution of the lavalike deposits conforms to asymmetries of other ejecta from the same craters, and the material is concentrated downrange to distances as great as a crater radius. The character and distribution of the lavalike materials support the idea that they formed by impact melting rather than by volcanism. Returned samples indicate that materials with appropriate physical characteristics are generated by partial melting of feldspathic rocks by impact. The geologic evidence at lunar craters suggests that there is more melt rock in and near the craters than is predicted by experiment and theory.

Howard, K. A.↗

NASA NTRS1976

Floor-fractured lunar craters

Observational data concerning floor-fractured craters on the lunar near and far sides are examined, including the morphologic classification of the craters, their spatial and size distributions, and their floor, peak, and rim elevations relative to the maria. Six morphologic classes and two subclasses are delineated on the basis of fracture pattern, crater floor depth, and floor type. These data are used to reconstruct a history of crater modification which accounts for the large differences in affected crater size and age, the small peak-rim elevation differences, remnant central peaks within mare-flooded craters and ringed plains, ridged and flat-topped rim profiles of heavily modified craters and ringed plains, as well as the absence of positive gravity anomalies in most floor-fractured craters and some large mare-filled craters. The results indicate that: (1) impact craters became centers of intrusions and volcanism generally related to periods of basin inundation by mare basalts; (2) some light-plains units in the highlands may be due to both impact ejecta and extrusions of light-colored lava or ash; (3) floor-fractured craters may have become important volcanic vents that contributed to the inundation of the lunar surface by mare basalts; and (4) the lunar highlands probably did not fully escape the epochs of mare flooding.

Schultz, P. H.↗

NASA NTRS1977

Origin and relative age of lunar and Mercurian intercrater plains

Differences in the diameter/density distribution of craters in the size range 7-100 km between heavily cratered areas and areas of intercrater plains indicate the deposition of both lunar and Mercurian intercrater plains has preferentially obliterated craters not greater than about 30 km diameter. This obliteration has altered the original lunar population distribution function from about a -1.3 slope to about -0.7 slope. At least a significant portion of both the lunar and Mercurian intercrater plains appear to be volcanic deposits emplaced during the later stages of heavy bombardment on each body rather than basin ejecta or an ancient primordial surface. The very widespread distribution of intercrater plains on Mercury compared to the moon may be related to Mercury's core formation which would have resulted in a large radius increase leading to widespread extensional fracturing to provide egress for the eruption of volcanic deposits on a global scale. This was followed by a radius decrease due to contraction of the lithosphere to produce thrust faulting represented by Mercury's lobate scarps.

Strom, R. G.↗

NASA NTRS2013

Effects of Spacecraft Landings on the Moon

The rocket exhaust of spacecraft landing on the Moon causes a number of observable effects that need to be quantified, including: disturbance of the regolith and volatiles at the landing site; damage to surrounding hardware such as the historic Apollo sites through the impingement of high-velocity ejecta; and levitation of dust after engine cutoff through as-yet unconfirmed mechanisms. While often harmful, these effects also beneficially provide insight into lunar geology and physics. Research results from the past 10 years is summarized and reviewed here.

Metzger, P. T.↗

NASA NTRS2013

Effects of Spacecraft Landings on the Moon

The rocket exhaust of spacecraft landing on the Moon causes a number of observable effects that need to be quantified, including: disturbance of the regolith and volatiles at the landing site; damage to surrounding hardware such as the historic Apollo sites through the impingement of high-velocity ejecta; and levitation of dust after engine cutoff through as-yet unconfirmed mechanisms. While often harmful, these effects also beneficially provide insight into lunar geology and physics. Some of the research results from the past 10 years is summarized and reviewed here.

Metzger, Philip T.↗

NASA NTRS2022

Environmental Testing of the OVEN System for Lunar Water Extraction and Prospecting

Introduction: The presence of water ice in permanently shadowed regions on the lunar surface [1] may enable a sustained human presence on the Moon with minimal need for consumables. However, in order to develop a long term utilization plan that includes the usage of in-situ water we must first understand the abundance, stratigraphy and distribution of this re-source. Multiple space agencies currently have plans for lunar water prospecting missions. The Optimized Volatile Extraction Node (OVEN) was designed for water prospecting missions that require samples to be weighed, sealed, and heated as the means of determining water concentration. This method of water quantification necessitates a fair amount of automation, so a rigorous environmental test program was performed in order to build confidence in the performance of the OVEN design. The work presented here describes the OVEN environmental test program as well as ongoing efforts to improve on the design. Vibration: The OVEN participated in two rounds of random vibration tests. The first test was a stand-alone test performed at the Energy Systems Test Area of the Johnson Space Center. The second test was an integrated test with the mobile platform developed for the Resource Prospector project. The OVEN survived both tests without damage, but the tests did provide valuable lessons learned with regards to specific operations. Thermal Vacuum: The OVEN was successfully demonstrated at a temperature range of -50 to 75 C in a thermal vacuum chamber. The need to heat motor gearboxes at lower temperatures was predetermined so this test program was completed by implementing a method of gearbox heating that used the existing circuitry within the motors. Dust: A custom dynamometer was built in order to determine the torque required to move the various mechanisms within the OVEN at a range of temperatures. The OVEN system was coated with lunar dust simulant in order to determine mechanism torques under a worst-case operating condition. Sublimation: Sublimation losses within the OVEN were quantified through a series of test configurations, including an integrated test in a thermal vacuum chamber at Glenn Research Center [2]. Current Work: The OVEN subsystem is currently not a component of any existing prospecting missions, but work continues that will take the lessons learned from previous environmental tests and improve on the design in order to be considered for future prospecting opportunities. References: [1] Colaprete, A., Schultz, P., Heldmann, J., Wooden, D., Shirley, M., Ennico, K., ... & Sollitt, L. (2010). Detection of water in the LCROSS ejecta plume. science, 330(6003), 463-468. [2] Kleinhenz, J., Smith, J., Roush, T., Colaprete, A., Zacny, K., Paulsen, G., ... & Paz, A. (2018). Volatiles Loss from water bearing regolith simulant at Lunar Environments. In Earth and Space 2018: Engineering for Extreme Environments (pp. 454-466). Reston, VA: American Society of Civil Engineers.

A Paz↗

NASA NTRS2023

New Insights Into Aristarchus Crater With LRO LAMP Far-Ultraviolet Observations

Aristarchus crater is a Copernican-age impact crater well known for its high-albedo ejecta blanket and nearby flow features rich in pyroclastic materials. The Lyman Alpha Mapping Project (LAMP) is a far-ultraviolet (FUV) spectrograph (57–197 nm) on board the Lunar Reconnaissance Orbiter (LRO). LAMP data identified Aristarchus crater as having a high Off-band (155–184 nm) to On-band (130–155 nm) albedo (Off/On) ratio, providing new insight into the mineral composition of the area. Previous LAMP observations of bright crater rays and lunar swirls show that regions of high Off/On-band ratios may indicate highly feldspathic compositions. In this study we use LAMP data to understand FUV compositional signatures at Aristarchus. We investigate four well-characterized regions of interest around Aristarchus crater, and we compare Off/On-band ratios at Aristarchus crater to laboratory-derived ratios of several endmembers such as anorthite and olivine. We further analyze LAMP FUV spectra alongside near-infrared spectra from the Moon Mineral Mapper (M3) on board Chandrayaan-1 to characterize the mineralogy in several regions of interest. We find that LAMP Off/On-band ratios are able to distinguish between plagioclase feldspars and minerals such as quartz and mafic-dominated compositions. The LAMP Off/On-band ratios at Aristarchus are higher than previously reported ratios for plagioclase-rich regions, suggesting that the composition is unique to Aristarchus. Spectra from LAMP and M 3 both show that the central peak and high-albedo ejecta around Aristarchus contain shocked, possibly alkalic, plagioclase feldspar.

Elizabeth Czajka↗

NASA NTRSDate not supplied

Directed Illumination of Sunlight Collimated and Observed Beneath A Lunar Lander (DISCOBaLL): Structured Illumination for a Lunar Surface Photogrammetry System

Plume-Surface Interaction↗

NASA NTRSDate not supplied

Overview of Predictive Simulation Capability Development for Crater Evolution and Ejecta in Continuum/Rarefied Flows

As part of the Game Changing Development (GCD) Program, funded by NASA’s Space Technology Mission Directorate (STMD), the development of simulation capability for the prediction of extra-terrestrial Plume Surface Interaction (PSI) environments has been undertaken by the Fluid Dynamics Branch at NASA/MSFC. The Predictive Simulation Capability (PSC) Element is focused on creating simulation capability for the reliable and accurate prediction of PSI in Martian (~650 Pa) and Lunar (vacuum) ambient environments. In addition to the predictive simulation capability, the GCD Program also contains a companion Ground Testing Element for development of focused datasets for validation of predictive capability as well as a Flight-focused Instrumentation Element. The focus of this paper is to provide an overview and a brief status on one area of capability development through this GCD PSI project - capturing the effects of mixed continuum/rarefied flow on crater development and ejecta sheets. This includes both capability enhancements and maturation of the predictive tool, Loci/GGFS, into a production capable tool as well as validation of the tool against PSI data in Martian and Lunar environments. There are six newly developed capabilities that will be production ready by the end of the fiscal year. Newly developed capabilities must first be verified prior to being production ready, and this process includes capability demonstration, solution verification, and performance evaluation. An overview of the newly developed capabilities with respect to several test cases, including cratering simulations of the Apollo Lunar Module, will be presented. Several validation analyses have been performed to validate in Martian and more Lunar-like environments, including simulations of cratering from a subsonic flow test at Planetary Aeolian Lab (PAL) conducted in a Martian-like environment and pre-test cratering predictions of Physics Focused Ground Test (PFGT) tests planned to be performed in Martian-like and more Lunar-like environments. An overview of these validation analyses as it pertains to the capability development will be presented.

Andrew Weaver↗

NASA NTRS1974

Fresh lunar impact craters - Review of variations with size

Thirty-three morphologic characteristics are reviewed for fresh lunar impact craters wider than 1 km. Bar graphs express the way each characteristic varies with crater size. The features are grouped as crater structure, ejecta, and downhill flow features. Major structural transitions occur at diameters of about 15 and 200 km. Details of the ejecta blanket, which include several kinds of lineations, dunelike ridges, troughs, and lobes, reflect different transport regimes in the ejecta. Some materials at larger craters flowed downhill in lavalike fashion after the ejecta was deposited; the lavalike materials are probably impact melt.

Howard, K. A.↗

NASA NTRS2002

Sources of Near Side Lunar Magnetic Anomalies

Lunar Prospector magnetometer data has been used to identify a number of nearside magnetic anomalies. Some of the features identified appear to correlate with impact ejecta, supporting a basin ejecta origin to the nearside anomalies. Additional information is contained in the original extended abstract.

Richmond, Nicola C.↗

NASA NTRS2004

Lunar and Planetary Science XXXV: Impacts: Modeling and Observations

This document covers the following topics: Cratering on Titan: Projectiles, Craters and Impact Melt; The Cratering Database: Making Code Jockeys Honest; Popigai Impact Structure Modeling: Morphology and Worldwide Ejecta; Anhydrite EOS and Phase Diagram in Relation to Shock Decomposition; Computational Investigations of the Chesapeake Bay Impact Structure; Hydrocode Simulations of the Chesapeake Bay Impact; Lockne Crater as a Result of Oblique Impact; The Influence of a Deep Shelf Sea on the Excavation and Modification of a Marine-Target Crater, the Lockne Crater, Central Sweden; Pre-Drilling Investigation of the Lake Bosumtwi Impact Crater: Constraints from Geophysics and Numerical Modelling; Central Uplift Formation at the Middlesboro Impact Structure, Kentucky, USA; A SRTM Investigation of Serra da Cangalho Impact Structure, Brazil; Brazilian Impact Craters: A Review; Flynn Creek Impact Structure: New Insights from Breccias, Melt Features, Shatter Cones, and Remote Sensing; The Howell Structure, Lincoln County, Tennessee: A Review of Past and Current Research; After the Chicxulub Impact: Control on Depositional and Diagenetic History of the Cenozoic Carbonate Formations of the Northwestern Yucatan Peninsula, Mexico; Ni Contents by Non-Destructive In-Situ XRF Method of Takamatsu-Kagawa Crater District in Japan; and Akiyoshi Limestone Blocks Transported by the P/T Boundary Event to Japan Islands.

Source record↗

NASA NTRS1976

Impact ejecta on the moon

The partitioning of energy and the distribution of the resultant ejecta on the moon is numerically modeled using a Eulerian finite difference grid. The impact of an iron meteoroid at 15 km/sec on a gabbroic anorthosite lunar crust is examined. The high speed impact induced flow is described over the entire hydrodynamic regime from a time where the peak pressures are 6 Mbar until the stresses everywhere in the flow are linearly elastic, and less than 5 kbar. Shock-induced polymorphic phase changes, (plagioclase and pyroxene to hollandite and perovskite), and the subsequent reversion to low pressure phases are demonstrated to enhance shock wave attenuation. A rate-dependent equation of state is used for describing the hysteretic effect of the phase change. Ballistic equations for a spherical planet are then applied to material with net velocity away from the moon.

Okeefe, J. D.↗

NASA NTRS1980

Possible rim crest deposits in cores 12027 and 15008 - Some interpretations and problems for future research

Light colored coarse grained soils in the upper parts of cores 12027 and 15008 have a chaotic fabric and abundant bedrock-derived rock fragments. They overlie dark colored, fine grained soils with horizontal fabric and abundant regolith-derived rock fragments. The light colored soils are interpreted to be rim crest deposits associated with the craters seen in the lunar surface sampling photographs. The coarse size, poor sorting and chaotic fabric are believed to have originated by the violent mixing processes which are expected with ejecta deposition. The increase in bedrock-derived particles within the light colored soil can be explained by ejecta from craters that penetrated through or deep into the regolith. The dark soils are believed to predate the craters. Distribution of rock fragments in the material interpreted as rim crest ejecta does not fit a simple model of overturned stratigraphy.

Nagle, J. S.↗

NASA NTRS2012

Further Analysis on the Mystery of the Surveyor III Dust Deposits

The Apollo 12 lunar module (LM) landing near the Surveyor III spacecraft at the end of 1969 has remained the primary experimental verification of the predicted physics of plume ejecta effects from a rocket engine interacting with the surface of the moon. This was made possible by the return of the Surveyor III camera housing by the Apollo 12 astronauts, allowing detailed analysis of the composition of dust deposited by the LM plume. It was soon realized after the initial analysis of the camera housing that the LM plume tended to remove more dust than it had deposited. In the present study, coupons from the camera housing have been reexamined. In addition, plume effects recorded in landing videos from each Apollo mission have been studied for possible clues.

Metzger, Philip↗

NASA NTRS2020

Experimental Impacts into Strength-Layered Targets: Ejecta Kinematics

AImpact cratering has dominated the evolution and modification of planetary surfaces through-out the history of the solar system. Impact craters can serve as probes to understanding the details of a planetary subsurface; for example, Oberbeck and Quaide, suggested that crater morphology can be used to estimate the thickness of a regolith layer on top of a more competent unit. Lunar craters show a morphological progression from a simple bowl shape to flat-floored and concentric craters as crater diameter in-creases for a given regolith thickness. The final shape of the impact crater is a result of the subsurface flow-field initiated as the projectile transfers its energy and momentum to the target surface at the moment of impact. Therefore, when a regolith layer is present over a stronger substrate, such as is the case on the lunar surface, the substrate modifies the flow-field and thereby the excavation flow of the crater, which is reflected in the morphology of the final crater. Here we report on a series of experimental impacts into targets composed of a thin layer of loose sand on top of a stronger substrate. We use the Ejection-Velocity Measurement System developed to examine the ejecta kinematics during the formation of these craters.

Anderson, J. L. B.↗