Search NASA⌕ Search

SEARCH · Search NASA

Results for “methodology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Encouraging the pursuit of advanced degrees in science and engineering: Top-down and bottom-up methodologies

The MassPEP/NASA Graduate Research Development Program (GRDP) whose objective is to encourage Black Americans, Mexican Americans, American Indians, Puerto Ricans, and Pacific Islanders to pursue graduate degrees in science and engineering is described. The GRDP employs a top-down or goal driven methodology through five modules which focus on research, graduate school climate, technical writing, standardized examinations, and electronic networking. These modules are designed to develop and reinforce some of the skills necessary to seriously consider the goal of completing a graduate education. The GRDP is a community-based program which seeks to recruit twenty participants from a pool of Boston-area undergraduates enrolled in engineering and science curriculums and recent graduates with engineering and science degrees. The program emphasizes that with sufficient information, its participants can overcome most of the barriers perceived as preventing them from obtaining graduate science and engineering degrees. Experience has shown that the top-down modules may be complemented by a more bottom-up or event-driven methodology. This approach considers events in the academic and professional experiences of participants in order to develop the personal and leadership skills necessary for graduate school and similar endeavors.

Maddox, Anthony B.↗
NASA NTRS1991

Application of an integrated flight/propulsion control design methodology to a STOVL aircraft

Results are presented from the application of an emerging Integrated Flight/Propulsion Control (IFPC) design methodology to a Short Take Off and Vertical Landing (STOVL) aircraft in transition flight. The steps in the methodology consist of designing command shaping prefilters to provide the overall desired response to pilot command inputs. A previously designed centralized controller is first validated for the integrated airframe/engine plant used. This integrated plant is derived from a different model of the engine subsystem than the one used for the centralized controller design. The centralized controller is then partitioned in a decentralized, hierarchical structure comprising of airframe lateral and longitudinal subcontrollers and an engine subcontroller. Command shaping prefilters from the pilot control effector inputs are then designed and time histories of the closed loop IFPC system response to simulated pilot commands are compared to desired responses based on handling qualities requirements. Finally, the propulsion system safety and nonlinear limited protection logic is wrapped around the engine subcontroller and the response of the closed loop integrated system is evaluated for transients that encounter the propulsion surge margin limit.

Garg, Sanjay↗
NASA NTRS1990

On the application of a frequency domain controller design methodology to non-minimum phase and unstable systems

A frequency-domain design methodology was developed for controller synthesis maximizing the allowable size of an unknown-but-bounded disturbance while satisfying prespecified control and output constraints. The design technique, which accounts for bandwidth limitations, is based on mapping time-domain constraints into the frequency domain. Application of this technique to non-minimum-phase and/or unstable systems is presented. A non-minimum-phase, unstable SIMO (single-input/multiple-output) system is examined, and the results are compared to those obtained by the set-theoretic (ST) approach. The comparison shows that this methodology can yield controllers that reject step disturbances larger than those obtained by the ST method.

Sobhani, Massoud↗
NASA NTRS1992

Observations on computational methodologies for use in large-scale, gradient-based, multidisciplinary design incorporating advanced CFD codes

How a combination of various computational methodologies could reduce the enormous computational costs envisioned in using advanced CFD codes in gradient based optimized multidisciplinary design (MdD) procedures is briefly outlined. Implications of these MdD requirements upon advanced CFD codes are somewhat different than those imposed by a single discipline design. A means for satisfying these MdD requirements for gradient information is presented which appear to permit: (1) some leeway in the CFD solution algorithms which can be used; (2) an extension to 3-D problems; and (3) straightforward use of other computational methodologies. Many of these observations have previously been discussed as possibilities for doing parts of the problem more efficiently; the contribution here is observing how they fit together in a mutually beneficial way.

Newman, P. A.↗
NASA NTRS1991

A generic trade study methodology for the system analysis of regenerative life support systems

The performance of engineering tradeoffs is a key technique in a rigorous system engineering process used to develop advanced regenerative life support technology by NASA Ames Research Center. The trade study methodology consists of several steps that include deriving relevant life support system functional requirements from a given space exploration mission scenario and synthesizing a set of design options to be analyzed during the study. Examples relevant to life support technology are used to describe the trade study methodology.

Bilardo, Vincent J., Jr.↗
NASA NTRS1992

A Rayleigh-Ritz design methodology for cutouts in composite structures

A new design methodology is presented for cutouts in composite aircraft structure. The methodology is based on a Rayleigh-Ritz stress analysis procedure that accommodates circular and elliptical cutouts in composite panels under generalized in-plane loading conditions. Cutout padups and panel stiffener reinforcements are also included in this procedure. Panel strength calculations are performed by combining the stress analysis with a generalized version of the average stress failure criterion. Sizing procedures are given for design of padup and stiffener reinforcements in cutout panels, and an example problem is provided to illustrate typical results.

Russell, Steven G.↗
NASA NTRS1992

Methodologies for building robust schedules

COMPASS is the name of a Computer Aided Scheduling System designed and built for NASA. COMPASS can be used to develop schedule of activities based upon the temporal relationships of the activities and their resource requirements. COMPASS uses this information, and guided by the user, develops precise start and stop times for the activities. In actual practice however, it is impossible to know with complete certainty what the actual durations of the scheduled activities will really be. The best that one can hope for is knowledge of the probability distribution for the durations. This paper investigates methodologies for using a scheduling tool like COMPASS that is based upon definite values for the resource requirements, while building schedules that remain valid in the face of the schedule execution perturbations. Representations for the schedules developed by these methodologies are presented, along with a discussion of the algorithm that could be used by a computer onboard a spacecraft to efficiently monitor and execute these schedules.

Dean, John H.↗
NASA NTRS1992

A comparison of high cycle fatigue methodologies

To evaluate alternate turbopump development (ATD) high cycle fatigue (HCF) methodology, a comparison was made with the space shuttle main engine (SSME) methodology. This report documents the comparison and evaluates ATD's HCF system.

Herda, D. A.↗
NASA NTRS1992

Methodology issues concerning the accuracy of kinematic data collection and analysis using the ariel performance analysis system

Kinematics, the study of motion exclusive of the influences of mass and force, is one of the primary methods used for the analysis of human biomechanical systems as well as other types of mechanical systems. The Anthropometry and Biomechanics Laboratory (ABL) in the Crew Interface Analysis section of the Man-Systems Division performs both human body kinematics as well as mechanical system kinematics using the Ariel Performance Analysis System (APAS). The APAS supports both analysis of analog signals (e.g. force plate data collection) as well as digitization and analysis of video data. The current evaluations address several methodology issues concerning the accuracy of the kinematic data collection and analysis used in the ABL. This document describes a series of evaluations performed to gain quantitative data pertaining to position and constant angular velocity movements under several operating conditions. Two-dimensional as well as three-dimensional data collection and analyses were completed in a controlled laboratory environment using typical hardware setups. In addition, an evaluation was performed to evaluate the accuracy impact due to a single axis camera offset. Segment length and positional data exhibited errors within 3 percent when using three-dimensional analysis and yielded errors within 8 percent through two-dimensional analysis (Direct Linear Software). Peak angular velocities displayed errors within 6 percent through three-dimensional analyses and exhibited errors of 12 percent when using two-dimensional analysis (Direct Linear Software). The specific results from this series of evaluations and their impacts on the methodology issues of kinematic data collection and analyses are presented in detail. The accuracy levels observed in these evaluations are also presented.

Wilmington, R. P.↗
NASA NTRS1992

A stochastic optimal feedforward and feedback control methodology for superagility

A new control design methodology is developed: Stochastic Optimal Feedforward and Feedback Technology (SOFFT). Traditional design techniques optimize a single cost function (which expresses the design objectives) to obtain both the feedforward and feedback control laws. This approach places conflicting demands on the control law such as fast tracking versus noise atttenuation/disturbance rejection. In the SOFFT approach, two cost functions are defined. The feedforward control law is designed to optimize one cost function, the feedback optimizes the other. By separating the design objectives and decoupling the feedforward and feedback design processes, both objectives can be achieved fully. A new measure of command tracking performance, Z-plots, is also developed. By analyzing these plots at off-nominal conditions, the sensitivity or robustness of the system in tracking commands can be predicted. Z-plots provide an important tool for designing robust control systems. The Variable-Gain SOFFT methodology was used to design a flight control system for the F/A-18 aircraft. It is shown that SOFFT can be used to expand the operating regime and provide greater performance (flying/handling qualities) throughout the extended flight regime. This work was performed under the NASA SBIR program. ICS plans to market the software developed as a new module in its commercial CACSD software package: ACET.

Halyo, Nesim↗
NASA NTRS1992

Base heating methodology improvements, volume 1

This document is the final report for NASA MSFC Contract NAS8-38141. The contracted effort had the broad objective of improving the launch vehicles ascent base heating methodology to improve and simplify the determination of that environment for Advanced Launch System (ALS) concepts. It was pursued as an Advanced Development Plan (ADP) for the Joint DoD/NASA ALS program office with project management assigned to NASA/MSFC. The original study was to be completed in 26 months beginning Sep. 1989. Because of several program changes and emphasis on evolving launch vehicle concepts, the period of performance was extended to the current completion date of Nov. 1992. A computer code incorporating the methodology improvements into a quick prediction tool was developed and is operational for basic configuration and propulsion concepts. The code and its users guide are also provided as part of the contract documentation. Background information describing the specific objectives, limitations, and goals of the contract is summarized. A brief chronology of the ALS/NLS program history is also presented to provide the reader with an overview of the many variables influencing the development of the code over the past three years.

Bender, Robert L.↗
NASA NTRS1993

LOX/hydrocarbon rocket engine analytical design methodology development and validation. Volume 1: Executive summary and technical narrative

During the past three decades, an enormous amount of resources were expended in the design and development of Liquid Oxygen/Hydrocarbon and Hydrogen (LOX/HC and LOX/H2) rocket engines. A significant portion of these resources were used to develop and demonstrate the performance and combustion stability for each new engine. During these efforts, many analytical and empirical models were developed that characterize design parameters and combustion processes that influence performance and stability. Many of these models are suitable as design tools, but they have not been assembled into an industry-wide usable analytical design methodology. The objective of this program was to assemble existing performance and combustion stability models into a usable methodology capable of producing high performing and stable LOX/hydrocarbon and LOX/hydrogen propellant booster engines.

Pieper, Jerry L.↗
NASA NTRS1992

Training effectiveness assessment: Methodological problems and issues

The U.S. military uses a large number of simulators to train and sustain the flying skills of helicopter pilots. Despite the enormous resources required to purchase, maintain, and use those simulators, little effort has been expended in assessing their training effectiveness. One reason for this is the lack of an evaluation methodology that yields comprehensive and valid data at a practical cost. Some of these methodological problems and issues that arise in assessing simulator training effectiveness, as well as problems with the classical transfer-of-learning paradigm were discussed.

Cross, Kenneth D.↗
NASA NTRS1991

A Rayleigh-Ritz analysis methodology for cutouts in composite structures

A new Rayleigh-Ritz stress analysis methodology that was developed for composite panels containing cutouts is described. The procedure, which makes use of a general assumed displacement field, accommodates circular and elliptical cutouts in biaxially loaded rectangular composite panels. Symmetric integral padups around the cutout can be included in the analysis. Benchmark results are presented to demonstrate the accuracy of the technique. Strength predictions based on the average stress criterion are generated and compared with experimental data. Finally, the stress analysis methodology is integrated into a design procedure for sizing integral padups around circular cutouts, and a sample problem is solved to illustrate its use.

Russell, Steven G.↗
NASA NTRS1992

Observations on computational methodologies for use in large-scale, gradient-based, multidisciplinary design

Various computational methodologies relevant to large-scale multidisciplinary gradient-based optimization for engineering systems design problems are examined with emphasis on the situation where one or more discipline responses required by the optimized design procedure involve the solution of a system of nonlinear partial differential equations. Such situations occur when advanced CFD codes are applied in a multidisciplinary procedure for optimizing an aerospace vehicle design. A technique for satisfying the multidisciplinary design requirements for gradient information is presented. The technique is shown to permit some leeway in the CFD algorithms which can be used, an expansion to 3D problems, and straightforward use of other computational methodologies.

Newman, P. A.↗
NASA NTRS1993

Development of a methodology for assessing the safety of embedded software systems

A Dynamic Flowgraph Methodology (DFM) based on an integrated approach to modeling and analyzing the behavior of software-driven embedded systems for assessing and verifying reliability and safety is discussed. DFM is based on an extension of the Logic Flowgraph Methodology to incorporate state transition models. System models which express the logic of the system in terms of causal relationships between physical variables and temporal characteristics of software modules are analyzed to determine how a certain state can be reached. This is done by developing timed fault trees which take the form of logical combinations of static trees relating the system parameters at different point in time. The resulting information concerning the hardware and software states can be used to eliminate unsafe execution paths and identify testing criteria for safety critical software functions.

Garrett, C. J.↗
NASA NTRS1993

Rocket plume base heating methodology

A review of radiative transport calculation methods for base heating is presented followed by a description of the current methodology for the Space Shuttle plume radiation predictions and improvements for the Advanced Solid Rocket Booster (ASRB). The calculation methods include empirical methods, the SIRRM code and the forward and reverse Monte Carlo methods. Current plume radiation methods include those used for the Space Shuttle Main Engines and the Solid Rocket Booster (SRB). Methods being developed for the ASRB include changes in plume property prediction methodology and application of the reverse Monte Carlo method in predicting plume radiation models. Results of the prediction methods are compared with experimental measurements on the current SRB and on 1/6-scale motors using both SRB and ASRB propellants. Examples are also presented demonstrating the statistical results available with the reverse Monte Carlo method.

Reardon, John E.↗
NASA NTRS1993

Updating finite element dynamic models using an element-by-element sensitivity methodology

A sensitivity-based methodology for improving the finite element model of a given structure using test modal data and a few sensors is presented. The proposed method searches for both the location and sources of the mass and stiffness errors and does not interfere with the theory behind the finite element model while correcting these errors. The updating algorithm is derived from the unconstrained minimization of the squared L sub 2 norms of the modal dynamic residuals via an iterative two-step staggered procedure. At each iteration, the measured mode shapes are first expanded assuming that the model is error free, then the model parameters are corrected assuming that the expanded mode shapes are exact. The numerical algorithm is implemented in an element-by-element fashion and is capable of 'zooming' on the detected error locations. Several simulation examples which demonstate the potential of the proposed methodology are discussed.

Farhat, Charbel↗