Results for “model set up” — Page 16

NASA NTRS2011

X-Ray Reflected Spectra from Accretion Disk Models. II. Diagnostic Tools for X-Ray Observations

We present a comprehensive study of the emission spectra from accreting sources. We use our new reflection code to compute the reflected spectra from an accretion disk illuminated by X-rays. This set of models covers different values of ionization parameter, solar iron abundance and photon index for the illuminating spectrum. These models also include the most complete and recent atomic data for the inner-shell of the iron and oxygen isonuclear sequences. We concentrate our analysis to the 2 - 10 keV energy region, and in particular to the iron K-shell emission lines. We show the dependency of the equivalent width (EW) of the Fe Ka with the ionization parameter. The maximum value of the EW is approx. 800 eV for models with log Epsilon approx. 1.5, and decreases monotonically as Epsilon increases. For lower values of Epsilon the Fe K(alpha) EW decreases to a minimum near log Epsilon approx. 0.8. We produce simulated CCD observations based on our reflection models. For low ionized, reflection dominated cases, the 2 -10 keV energy region shows a very broad, curving continuum that cannot be represented by a simple power-law. We show that in addition to the Fe K-shell emission, there are other prominent features such as the Si and S L(alpha) lines, a blend of Ar VIII-XI lines, and the Ca x K(alpha) line. In some cases the S xv blends with the He-like Si RRC producing a broad feature that cannot be reproduced by a simple Gaussian profile. This could be used as a signature of reflection.

Garcia, J.↗

DOE OSTI2025

Weakly supervised anomaly detection for resonant new physics in the dijet final state using proton-proton collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

An anomaly detection search for narrow-width resonances beyond the Standard Model that decay into a pair of jets is presented. The search is based on 139 fb −1 of proton-proton collisions at $\sqrt{s}$ = 13 TeV recorded during 2015–2018 with the ATLAS detector at the Large Hadron Collider. The analysis is optimized without a particular signal model and aims to be sensitive to a broad range of new physics. It uses two different machine learning strategies to estimate the background in different signal regions. In each region, a weakly supervised classifier is trained to distinguish this background model from data. The analysis focuses on events with high transverse momentum jets reconstructed as large-radius jets. The mass and substructure of these jets are used as inputs to the classifiers. After a classifier-based selection, the distribution of the invariant mass of the two jets is used to search for potential local excesses. The model-independent results of both the anomaly detection methods show no signs of significant local excesses. In addition to model-independent results, a representative set of signal models is injected into the data, and the sensitivity of the methods to these scenarios is reported.

Aad, G. [Aix-Marseille Université] (ORCID:00000002↗

DOE OSTI2024

Library of Advanced Materials for Engineering (LAMÉ) 5.20

Accurate and efficient constitutive modeling remains a cornerstone issue for solid mechanics analysis. Over the years, the LAMÉ advanced material model library has grown to address this challenge by implementing models capable of describing material systems spanning soft polymers to stiff ceramics including both isotropic and anisotropic responses. Inelastic behaviors including (visco)plasticity, damage, and fracture have all incorporated for use in various analyses. This multitude of options and flexibility, however, comes at the cost of many capabilities, features, and responses and the ensuing complexity in the resulting implementation. Therefore, to enhance confidence and enable the utilization of the LAMÉ library in application, this effort seeks to document and verify the various models in the LAMÉ library. Specifically, the broader strategy, organization, and interface of the library itself is first presented. The physical theory, numerical implementation, and user guide for a large set of models is then discussed. Importantly, a number of verification tests are performed with each model to not only have confidence in the model itself but also highlight some important response characteristics and features that may be of interest to end-users. Finally, in looking ahead to the future, approaches to add material models to this library and further expand the capabilities are presented.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Library of Advanced Materials for Engineering (LAMÉ) 5.22

Accurate and efficient constitutive modeling remains a cornerstone issue for solid mechanics analysis. Over the years, the LAMÉ advanced material model library has grown to address this challenge by implementing models capable of describing material systems spanning soft polymers to stiff ceramics including both isotropic and anisotropic responses. Inelastic behaviors including (visco)plasticity, damage, and fracture have all incorporated for use in various analyses. This multitude of options and flexibility, however, comes at the cost of many capabilities, features, and responses and the ensuing complexity in the resulting implementation. Therefore, to enhance confidence and enable the utilization of the LAMÉ library in application, this effort seeks to document and verify the various models in the LAMÉ library. Specifically, the broader strategy, organization, and interface of the library itself is first presented. The physical theory, numerical implementation, and user guide for a large set of models is then discussed. Importantly, a number of verification tests are performed with each model to not only have confidence in the model itself but also highlight some important response characteristics and features that may be of interest to end-users. Finally, in looking ahead to the future, approaches to add material models to this library and further expand the capabilities are presented.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Library of Advanced Materials for Engineering (LAMÉ) 5.28

Accurate and efficient constitutive modeling remains a cornerstone issue for solid mechanics analysis. Over the years, the LAMÉ advanced material model library has grown to address this challenge by implementing models capable of describing material systems spanning soft polymers to stiff ceramics including both isotropic and anisotropic responses. Inelastic behaviors including (visco)plasticity, damage, and fracture have all incorporated for use in various analyses. This multitude of options and flexibility, however, comes at the cost of many capabilities, features, and responses and the ensuing complexity in the resulting implementation. Therefore, to enhance confidence and enable the utilization of the LAMÉ library in application, this effort seeks to document and verify the various models in the LAMÉ library. Specifically, the broader strategy, organization, and interface of the library itself is first presented. The physical theory, numerical implementation, and user guide for a large set of models is then discussed. Importantly, a number of verification tests are performed with each model to not only have confidence in the model itself but also highlight some important response characteristics and features that may be of interest to end-users. Finally, in looking ahead to the future, approaches to add material models to this library and further expand the capabilities are presented.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Library of Advanced Materials for Engineering (LAMÉ) 5.30

Accurate and efficient constitutive modeling remains a cornerstone issue for solid mechanics analysis. Over the years, the LAMÉ advanced material model library has grown to address this challenge by implementing models capable of describing material systems spanning soft polymers to stiff ceramics including both isotropic and anisotropic responses. Inelastic behaviors including (visco)plasticity, damage, and fracture have all incorporated for use in various analyses. This multitude of options and flexibility, however, comes at the cost of many capabilities, features, and responses and the ensuing complexity in the resulting implementation. Therefore, to enhance confidence and enable the utilization of the LAMÉ library in application, this effort seeks to document and verify the various models in the LAMÉ library. Specifically, the broader strategy, organization, and interface of the library itself is first presented. The physical theory, numerical implementation, and user guide for a large set of models is then discussed. Importantly, a number of verification tests are performed with each model to not only have confidence in the model itself but also highlight some important response characteristics and features that may be of interest to end-users. Finally, in looking ahead to the future, approaches to add material models to this library and further expand the capabilities are presented.

36 MATERIALS SCIENCE↗

NASA NTRS1987

A general method for dynamic analysis of structures overview

The presented research deals with the development of a dynamic analysis method for structural systems. The modeling approach is essentially a finite element method in the sense that the structure is divided into n elements. An element is defined as any structural unit whose degree of freedom (dofs) can be categorized as either interface or non-interface dofs. An element could be a fundamental unit such as a rod, a beam, a plate etc., or it could be an entire structural component. Furthermore, the parameters for the element could be distributed or lumped. The choice of elements is totally arbitrary and is a matter of user convenience. In particular, issues of accuracy and convergence do not enter on the level of example that bookkeeping is reduced to a minimum. Each element is modeled using a set of interface constraint modes (ICM) combined with a set of interface restrained normal models (IRNM). The next step is the solution of the system eigenvalue problem. The procedure calls for the sequential solution of a number of small eigenvalue problems based on a truncation principle for IRNM. In addition, the form of these eigenvalue problems is very simple such that an escalator type of eigenvalue problem solver can be used which is extremely cost-effective and fast.

Engels, Remi C.↗

NASA NTRS1997

Transport Phenomena During Equiaxed Solidification of Alloys

Recent progress in modeling of transport phenomena during dendritic alloy solidification is reviewed. Starting from the basic theorems of volume averaging, a general multiphase modeling framework is outlined. This framework allows for the incorporation of a variety of microscale phenomena in the macroscopic transport equations. For the case of diffusion dominated solidification, a simplified set of model equations is examined in detail and validated through comparisons with numerous experimental data for both columnar and equiaxed dendritic growth. This provides a critical assessment of the various model assumptions. Models that include melt flow and solid phase transport are also discussed, although their validation is still at an early stage. Several numerical results are presented that illustrate some of the profound effects of convective transport on the final compositional and structural characteristics of a solidified part. Important issues that deserve continuing attention are identified.

Beckermann, C.↗

NASA NTRSDate not supplied

Kamodo’s Satellite Constellation Mission Planning Tool

Kamodo provides a functional model-agnostic interface to a growing collection of Heliophysics model outputs. The CCMC, in collaboration with the Geospace Dynamics Constellation Science Team, has recently developed Kamodo’s satellite constellation mission planning tool to perform reconstructions in any pair of dimensions, including time. The ‘reconstruction’ tool enables users to fly any 4-dimensional grid of satellites through a given model data set, reconstructing what the given constellation would observe during the mission. This capability facilitates determination of what satellite configuration is best for a given science question, even allowing comparison across multiple models. This tool, written in Python, is built upon Kamodo’s flythrough tool, which in turn depends on a growing network of model-specific interfaces. Since each model interface is designed with model-agnostic syntax, the flythrough tool and the satellite constellation mission planning tool also feature model-agnostic syntax. In this work, we will describe the basic analysis choices available in the tool and provide a variety of sample workflows. The tool is freely available at https://github.com/nasa/Kamodo for the public. We invite the community to use the reconstruction tool and adapt the provided workflows for their mission planning, and to contribute their own workflows to share with others.

software↗

NASA NTRSDate not supplied

SM25C-2002: Kamodo’s Satellite Constellation Mission Planning Tool

Kamodo provides a functional model-agnostic interface to a growing collection of Heliophysics model outputs. The CCMC, in collaboration with the Geospace Dynamics Constellation Science Team, has recently developed Kamodo’s satellite constellation mission planning tool to perform reconstructions in any pair of dimensions, including time. The ‘reconstruction’ tool enables users to fly any 4-dimensional grid of satellites through a given model data set, reconstructing what the given constellation would observe during the mission. This capability facilitates determination of what satellite configuration is best for a given science question, even allowing comparison across multiple models. This tool, written in Python, is built upon Kamodo’s flythrough tool, which in turn depends on a growing network of model-specific interfaces. Since each model interface is designed with model-agnostic syntax, the flythrough tool and the satellite constellation mission planning tool also feature model-agnostic syntax. In this work, we will describe the basic analysis choices available in the tool and provide a variety of sample workflows. The tool is freely available at https://github.com/nasa/Kamodo for the public. We invite the community to use the reconstruction tool and adapt the provided workflows for their mission planning, and to contribute their own workflows to share with others.

python↗

NASA NTRS1976

Benefits of hydrogen production research

An economic analysis of total monetary benefits arising from increased volume and efficiency of hydrogen production from various primary energy sources is carried out. The analysis is based on NASA's projections of future hydrogen demand in terms of both established industrial-chemical uses and new energy system applications, along with the mix of primary energy sources needed to meet this demand. A cost methodology model is worked out with the basic cost elements being plant construction costs, feedstock and energy costs, and operating and labor-related costs. A computer simulation technique was developed and a set of model calculations was performed. Some representative outputs of the computer analysis are displayed and conclusions are drawn on major factors determining the overall savings possible in hydrogen production and on its technological and economic impact.

Manvi, R.↗

NASA NTRS1978

The mechanics of ringed basin formation

The study investigates the mechanics of ring formation in lunar basins by collapse or slumping. Two classes of models are presented in order to broaden the range of plausible mechanisms involved. Extrusion flow models which assume a weak layer underlying a strong layer as well as plastic flow models which assume a continuous decrease of cohesion strength with depth are considered. In both classes, strength or resistance to deformation decreases with depth. If this decrease is rapid enough, in either set of models, at least one concentric fault scarp forms. The ratio between the scarp radius and the crater radius varies between 1.2 and about 2.7 depending on the model, and is thus in the range of observed radius ratios.

Melosh, H. J.↗

NASA NTRS1983

Space station needs, attributes, and architectural options: Brief analysis

A baseline set of model missions is thoroughly characterized in terms of support requirements, demands on the Space Station, operating regimes, payload properties, and statements of the mission goals and objectives. This baseline is a representative set of mission requirements covering the most likely extent of space station support requirements from which architectural options can be constructed and exercised. The baseline set of 90 missions are assessed collectively and individually in terms of the economic, performance, and social benefits.

Shepphird, F. H.↗

NASA NTRS2005

Modeling and Analysis of Space Based Transceivers

This paper presents the tool chain, methodology, and initial results of a study to provide a thorough, objective, and quantitative analysis of the design alternatives for space Software Defined Radio (SDR) transceivers. The approach taken was to develop a set of models and tools for describing communications requirements, the algorithm resource requirements, the available hardware, and the alternative software architectures, and generate analysis data necessary to compare alternative designs. The Space Transceiver Analysis Tool (STAT) was developed to help users identify and select representative designs, calculate the analysis data, and perform a comparative analysis of the representative designs. The tool allows the design space to be searched quickly while permitting incremental refinement in regions of higher payoff.

Reinhart, Richard C.↗

NASA NTRS2007

Modeling and Analysis of Space Based Transceivers

This paper presents the tool chain, methodology, and initial results of a study to provide a thorough, objective, and quantitative analysis of the design alternatives for space Software Defined Radio (SDR) transceivers. The approach taken was to develop a set of models and tools for describing communications requirements, the algorithm resource requirements, the available hardware, and the alternative software architectures, and generate analysis data necessary to compare alternative designs. The Space Transceiver Analysis Tool (STAT) was developed to help users identify and select representative designs, calculate the analysis data, and perform a comparative analysis of the representative designs. The tool allows the design space to be searched quickly while permitting incremental refinement in regions of higher payoff.

Moore, Michael S.↗

NASA NTRS1983

User's manual for master: Modeling of aerodynamic surfaces by 3-dimensional explicit representation

A system of computer programs was developed to model general three dimensional surfaces. Surfaces are modeled as sets of parametric bicubic patches. There are also capabilities to transform coordinates, to compute mesh/surface intersection normals, and to format input data for a transonic potential flow analysis. A graphical display of surface models and intersection normals is available. There are additional capabilities to regulate point spacing on input curves and to compute surface/surface intersection curves. Input and output data formats are described; detailed suggestions are given for user input. Instructions for execution are given, and examples are shown.

Gibson, S. G.↗

NASA NTRS1983

System maintenance manual for master modeling of aerodynamic surfaces by three-dimensional explicit representation

A system of computer programs has been developed to model general three-dimensional surfaces. Surfaces are modeled as sets of parametric bicubic patches. There are also capabilities to transform coordinate to compute mesh/surface intersection normals, and to format input data for a transonic potential flow analysis. A graphical display of surface models and intersection normals is available. There are additional capabilities to regulate point spacing on input curves and to compute surface intersection curves. Internal details of the implementation of this system are explained, and maintenance procedures are specified.

Gibson, A. F.↗

DOE OSTI2025

Myco-CORPSE simulations assessing mycorrhizal carbon allocation across U.S. forests and global change scenarios

Plants allocate a substantial portion of their fixed carbon belowground to mycorrhizal fungi in exchange for nutrients and other benefits. However, most current ecosystem models omit mycorrhizal processes, limiting our ability to predict plant–soil carbon dynamics under environmental change. To address this gap, we used a mycorrhiza-explicit soil biogeochemical model, Myco-CORPSE (Mycorrhizal Carbon, Organisms, Rhizosphere, and Protection in the Soil Environment), to simulate tree carbon allocation to arbuscular mycorrhizal (AM) and ectomycorrhizal (ECM) fungi in temperate forests.The dataset includes outputs from two sets of model simulations:1. Perturbation experiments: Simulations across gradients of ECM dominance (0–100%), nitrogen deposition, soil temperature, and net primary productivity (NPP) to test how these factors affect mycorrhizal C allocation and nutrient cycling.2. FIA-based simulations: Model applications to over 1,800 U.S. forest sites using site-specific data from the U.S. Forest Inventory and Analysis (FIA) program, including vegetation composition, mycorrhizal type, climate, litter traits, soil properties, and N deposition.Model outputs include simulated mycorrhizal carbon allocation and related biogeochemical variables, such as soil and microbial carbon and nitrogen stocks. Data are provided in CSV format and organized by experiment type (in separate ZIP files). Python scripts for running simulations, plotting, and spatial mapping are also included and organized similarly. No proprietary software is required. These outputs support a peer-reviewed study and were used to generate figures and tables in the associated publication.

54 ENVIRONMENTAL SCIENCES↗