Search NASA⌕ Search

SEARCH · Search NASA

Results for “model types”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

An Empirical Correction Method for Improving off-Axes Response Prediction in Component Type Flight Mechanics Helicopter Models

Historically, component-type flight mechanics simulation models of helicopters have been unable to satisfactorily predict the roll response to pitch stick input and the pitch response to roll stick input off-axes responses. In the study presented here, simple first-order low-pass filtering of the elemental lift and drag forces was considered as a means of improving the correlation. The method was applied to a blade-element model of the AH-64 APache, and responses of the modified model were compared with flight data in hover and forward flight. Results indicate that significant improvement in the off-axes responses can be achieved in hover. In forward flight, however, the best correlation in the longitudinal and lateral off-axes responses required different values of the filter time constant for each axis. A compromise value was selected and was shown to result in good overall improvement in the off-axes responses. The paper describes both the method and the model used for its implementation, and presents results obtained at hover and in forward flight.

Mansur, M. Hossein↗

Application of community data to surface complexation modeling framework development: Iron oxide protolysis

This study presents a comprehensive community data-driven surface complexation modeling framework for simulating potentiometric titration of mineral surfaces. Compiled community data for ferrihydrite, goethite, hematite, and magnetite are fit to produce representative protolysis constants that can reproduce potentiometric titration data collected from multiple literature sources. Using this framework, the impact of surface complexation model type and surface site density (SSD) on the fit quality and protolysis constants can be readily evaluated. For example, the non-electrostatic model yielded a poor data fit compared to diffuse double layer model and constant capacitance models due to the absence of known surface charge effects. Regardless of the choice of iron oxide mineral, pK a1 decreased with increasing SSD while the opposite tendency was observed for pK a2 . This newly developed framework demonstrates a method to reconcile community data-wide potentiometric titration data using Findable, Accessible, Interoperable, Reusable data principles to produce mineral protolysis constants that improve robustness of surface complexation models for applications in metal sorption and reactive transport modeling. The framework is readily expandable (as community data increase) and extensible (as the number of minerals increase). The framework provides a path forward for developing self-consistent, comprehensive, and updateable surface complexation databases for surface complexation and reactive transport modeling.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The field-space metric in spiral inflation and related models

Multi-field inflation models include a variety of scenarios for how inflation proceeds and ends. Models with the same potential but different kinetic terms are common in the literature. We compare spiral inflation and Dante’s inferno-type models, which differ only in their field-space metric. We justify a single-field effective description in these models and relate the single-field description to a mass-matrix formalism. We note the effects of the nontrivial field-space metric on inflationary observables, and consequently on the viability of these models. We also note a duality between spiral inflation and Dante’s inferno models with different potentials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

ON A STOCHASTIC MODEL FOR THE SPIN-DOWN OF SOLAR-TYPE STARS

Modeling the rotation history of solar-type stars is an outstanding problem in modern astrophysics. One of the main challenges is to explain the dispersion in the distribution of stellar rotation rate for young stars. Previous works have advocated diverse mechanisms to explain the presence of fast rotators (FRs) and also of slow rotators (SRs). For instance, dynamo saturation can limit the stellar spin-down and explain the presence of FRs but does not produce enough SRs. Here, we present a new model that can account for the presence of both types of rotators by incorporating fluctuations in the angular momentum loss. This renders the spin-down problem probabilistic in nature, some stars experiencing more braking on average than others. We show that random fluctuations in the loss of angular momentum enhance the population of both FR and SR compared to the deterministic cases (with a linear dynamo prescription or with dynamo saturation). The stochastic angular momentum loss thus provides an alternative physical mechanism to that of a saturated dynamo, with an even better agreement with observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Model interpretation of type III radio burst characteristics. II - Temporal aspects

A model of the radio emission region for kilometric type II bursts is used to interpret systematic variations observed in the temporal behavior of the burst parameters. The temporal behavior of the burst parameters observed by the ISEE-3 spacecraft is reviewed, and it is pointed out that the phase and modulation of the antenna signal vary in a systematic way with both time and observing frequency. The source azimuth is observed to drift with time, with the magnitude and sense of the drift depending on the location of the radio source relative to the observer. The modulation factor usually decreases uniformly with time and is frequently peaked near the burst onset. The model of the radio emission region is developed and used to obtain the intensity, phase, and modulation of the radio signal. Model results are used to show how the behavior of the burst parameters are related to attributes of the source region. It is shown that the temporal behavior of the radio parameters for an observed type II burst is well represented by the model.

Reiner, M. J.↗

The AgMIP GRIDded Crop Modeling Initiative (AgGRID) and the Global Gridded Crop Model Intercomparison (GGCMI)

Climate change is a significant risk for agricultural production. Even under optimistic scenarios for climate mitigation action, present-day agricultural areas are likely to face significant increases in temperatures in the coming decades, in addition to changes in precipitation, cloud cover, and the frequency and duration of extreme heat, drought, and flood events (IPCC, 2013). These factors will affect the agricultural system at the global scale by impacting cultivation regimes, prices, trade, and food security (Nelson et al., 2014a). Global-scale evaluation of crop productivity is a major challenge for climate impact and adaptation assessment. Rigorous global assessments that are able to inform planning and policy will benefit from consistent use of models, input data, and assumptions across regions and time that use mutually agreed protocols designed by the modeling community. To ensure this consistency, large-scale assessments are typically performed on uniform spatial grids, with spatial resolution of typically 10 to 50 km, over specified time-periods. Many distinct crop models and model types have been applied on the global scale to assess productivity and climate impacts, often with very different results (Rosenzweig et al., 2014). These models are based to a large extent on field-scale crop process or ecosystems models and they typically require resolved data on weather, environmental, and farm management conditions that are lacking in many regions (Bondeau et al., 2007; Drewniak et al., 2013; Elliott et al., 2014b; Gueneau et al., 2012; Jones et al., 2003; Liu et al., 2007; M¨uller and Robertson, 2014; Van den Hoof et al., 2011;Waha et al., 2012; Xiong et al., 2014). Due to data limitations, the requirements of consistency, and the computational and practical limitations of running models on a large scale, a variety of simplifying assumptions must generally be made regarding prevailing management strategies on the grid scale in both the baseline and future periods. Implementation differences in these and other modeling choices contribute to significant variation among global-scale crop model assessments in addition to differences in crop model implementations that also cause large differences in site-specific crop modeling (Asseng et al., 2013; Bassu et al., 2014).

climate↗

Towards a liana plant functional type for vegetation models

Lianas (woody climbers) are crucial components of tropical forests and they have been increasingly recognized to have profound effects on tropical forest carbon dynamics. Despite their importance, lianas' representation in vegetation models remains limited, partly due to the complexity of liana-tree dynamics and the diversity in liana life history strategies. This paper provides a comprehensive review of advances and challenges for mechanistically representing lianas in forest ecosystem models and a proposed path towards effectively representing lianas in these models. Defining a liana plant functional type is a significant challenge because of the high morphological and physiological diversity amongst liana species, and because of their structural association with trees. Here, we identify critical liana traits that likely should contribute to establishing a liana plant functional type, along with key processes to properly represent lianas in ecosystem models. Subsequently, we discuss a variety of possible liana implementation strategies with their associated strengths, limitations, computational costs and data requirements. A fundamental redesign of the tree-centric demographic vegetation models seems appropriate to accommodate the unique growth and competition strategies of lianas. We illustrate the potential of such models with a single-site case study where we disentangle putative mechanisms of liana increasing abundance. Furthermore, we underscore the critical need for comprehensive liana demographic and functional data (including long-term, physiological, and pantropical observations) for the qualitative implementation and evaluation in the proposed modeling efforts. Currently, there is a scarcity of liana data and the data that do exist have a neotropical bias. We finally introduce a new liana functional trait database that can centralize existing liana trait data, incentivize improved data gathering and thus facilitate model development and scientific analyses.

54 ENVIRONMENTAL SCIENCES↗

Hybrid LES/RANS Simulation of Transverse Sonic Injection into a Mach 2 Flow

A computational study of transverse sonic injection of air and helium into a Mach 1.98 cross-flow is presented. A hybrid large-eddy simulation / Reynolds-averaged Navier-Stokes (LES/RANS) turbulence model is used, with the two-equation Menter baseline (Menter-BSL) closure for the RANS part of the flow and a Smagorinsky-type model for the LES part of the flow. A time-dependent blending function, dependent on modeled turbulence variables, is used to shift the closure from RANS to LES. Turbulent structures are initiated and sustained through the use of a recycling / rescaling technique. Two higher-order discretizations, the Piecewise Parabolic Method (PPM) of Colella and Woodward, and the SONIC-A ENO scheme of Suresh and Huyhn are used in the study. The results using the hybrid model show reasonably good agreement with time-averaged Mie scattering data and with experimental surface pressure distributions, even though the penetration of the jet into the cross-flow is slightly over-predicted. The LES/RANS results are used to examine the validity of commonly-used assumptions of constant Schmidt and Prandtl numbers in the intense mixing zone downstream of the injection location.

Boles, John A.↗

Dynamic modeling of a single-stage downward firing, entrained flow gasifier

The gasifier is the heart of the integrated gasification combined cycle (IGCC), a technology that has emerged as an attractive alternative to conventional coal-fired power plant technology due to its higher efficiency and cleaner environmental performance especially with the option of CO{sub 2} capture and sequestration. Understanding the optimal performance of the gasifier is therefore paramount for the efficient operation of IGCC power plants. Numerous gasifier models of varying complexity have been developed to study the various aspects of gasifier performance. These range from simple one-dimensional (1D) process-type models to rigorous higher order 2-3D models based on computational fluid dynamics (CFD). Whereas high-fidelity CFD models can accurately predict most key aspects of gasifier performance, they are computationally expensive and typically take hours to days to execute on high-performance computers. Therefore, faster 1D partial differential equation (PDE)-based models are required for use in dynamic simulation studies, control system analysis, and training applications. A number of 1D gasifier models can be found in the literature, but most are steady-state models that have limited application in the practical operation of the gasifier. As a result, 1D PDE-based dynamic models are needed to further study and predict gasifier performance under a wide variety of process conditions and disturbances. In the current study, a 1D transient model of a single-stage downward-fired GE/Texaco-type entrained-flow gasifier has been developed. The model comprises mass, momentum and energy balances for the gas and solid phases. The model considers the initial gasification processes of water evaporation and coal devolatilization. In addition, the key heterogeneous and homogeneous chemical reactions have been modeled. The resulting time-dependent PDE model is solved using the well-known method of lines approach in Aspen Custom Modeler®, whereby the PDEs in the spatial domain are discretized and the resulting differential algebraic equations (DAEs) are then integrated over time using a dynamic integrator. The dynamic response results of the gasifier performance parameters to certain disturbances commonly encountered during practical operation are presented. These disturbances include ramp and step changes to input variables such as coal flow rate, oxygen-to-coal ratio and water-to-coal ratio among others. Comparison of model predictions to available dynamic data will also be discussed.

01 COAL, LIGNITE, AND PEAT↗

Non-standard interactions in radiative neutrino mass models

Models of radiative Majorana neutrino masses require new scalars and/or fermions to induce lepton-number-violating interactions. We show that these new particles also generate observable neutrino non-standard interactions (NSI) with matter. We classify radiative models as type-I or II, with type-I models containing at least one Standard Model (SM) particle inside the loop diagram generating neutrino mass, and type-II models having no SM particle inside the loop. While type-II radiative models do not generate NSI at tree-level, popular models which fall under the type-I category are shown, somewhat surprisingly, to generate observable NSI at tree-level, while being consistent with direct and indirect constraints from colliders, electroweak precision data and charged-lepton flavor violation (cLFV). We survey such models where neutrino masses arise at one, two and three loops. In the prototypical Zee model which generates neutrino masses via one-loop diagrams involving charged scalars, we find that diagonal NSI can be as large as (8%, 3.8%, 9.3%) for (ε$_{ee}$, ε$_{μμ}$, ε$_{ττ}$), while off-diagonal NSI can be at most (10$^{–3}$%, 0.56%, 0.34%) for (ε$_{eμ}$, ε$_{eτ}$, ε$_{μτ}$). In one-loop neutrino mass models using leptoquarks (LQs), (ε$_{μμ}$, ε$_{ττ}$) can be as large as (21.6%, 51.7%), while ε$_{ee}$ and (ε$_{eμ}$, ε$_{eτ}$, ε$_{μτ}$) can at most be 0.6%. Other two- and three-loop LQ models are found to give NSI of similar strength. The most stringent constraints on the diagonal NSI are found to come from neutrino oscillation and scattering experiments, while the off-diagonal NSI are mostly constrained by low-energy processes, such as atomic parity violation and cLFV. We also comment on the future sensitivity of these radiative models in long-baseline neutrino experiments, such as DUNE. While our analysis is focused on radiative neutrino mass models, it essentially covers all NSI possibilities with heavy mediators.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

TYPE II SUPERNOVAE: MODEL LIGHT CURVES AND STANDARD CANDLE RELATIONSHIPS

A survey of Type II supernovae explosion models has been carried out to determine how their light curves and spectra vary with their mass, metallicity, and explosion energy. The presupernova models are taken from a recent survey of massive stellar evolution at solar metallicity supplemented by new calculations at subsolar metallicity. Explosions are simulated by the motion of a piston near the edge of the iron core and the resulting light curves and spectra are calculated using full multi-wavelength radiation transport. Formulae are developed that describe approximately how the model observables (light curve luminosity and duration) scale with the progenitor mass, explosion energy, and radioactive nucleosynthesis. Comparison with observational data shows that the explosion energy of typical supernovae (as measured by kinetic energy at infinity) varies by nearly an order of magnitude-from 0.5 to 4.0 x 10{sup 51} ergs, with a typical value of approx0.9 x 10{sup 51} ergs. Despite the large variation, the models exhibit a tight relationship between luminosity and expansion velocity, similar to that previously employed empirically to make SNe IIP standardized candles. This relation is explained by the simple behavior of hydrogen recombination in the supernova envelope, but we find a sensitivity to progenitor metallicity and mass that could lead to systematic errors. Additional correlations between light curve luminosity, duration, and color might enable the use of SNe IIP to obtain distances accurate to approx20% using only photometric data.

79 ASTRONOMY AND ASTROPHYSICS↗

Numerical investigation of wind turbine wakes under high thrust coefficient

Abstract We study wind turbine wakes of rotors operating at high thrust coefficients ( C T > 24/25) using large‐eddy simulations with a rotating actuator disk model. Wind turbine wakes at high thrust coefficients are different from wakes at low thrust coefficients. Wakes behave differently at high thrust, with increased turbulence and faster recovery. Lower induction in the wake is achieved because wakes in high‐thrust conditions recover much faster than in normal operating conditions. This enhanced recovery is possible thanks to the turbulence generated in the near wake. We explore the mechanism behind this behavior and propose a simple model to reproduce it. We also propose a Gaussian fit for the wakes under high‐thrust conditions and use it use it to initialize an Ainslie type model within the FAST.Farm framework.

FAST.Farm↗

Path Properties of Atmospheric Transitions: Illustration with a Low-Order Sudden Stratospheric Warming Model

Many rare weather events, including hurricanes, droughts, and floods, dramatically impact human life. To accurately forecast these events and characterize their climatology requires specialized mathematical techniques to fully leverage the limited data that are available. Here we describe transition path theory (TPT), a framework originally developed for molecular simulation, and argue that it is a useful paradigm for developing mechanistic understanding of rare climate events. TPT provides a method to calculate statistical properties of the paths into the event. As an initial demonstration of the utility of TPT, we analyze a low-order model of sudden stratospheric warming (SSW), a dramatic disturbance to the polar vortex that can induce extreme cold spells at the surface in the midlatitudes. SSW events pose a major challenge for seasonal weather prediction because of their rapid, complex onset and development. Climate models struggle to capture the long-term statistics of SSW, owing to their diversity and intermittent nature. We use a stochastically forced Holton–Mass-type model with two stable states, corresponding to radiative equilibrium and a vacillating SSW-like regime. In this stochastic bistable setting, from certain probabilistic forecasts TPT facilitates estimation of dominant transition pathways and return times of transitions. These “dynamical statistics” are obtained by solving partial differential equations in the model’s phase space. With future application to more complex models, TPT and its constituent quantities promise to improve the predictability of extreme weather events through both generation and principled evaluation of forecasts.

54 ENVIRONMENTAL SCIENCES↗

Simplifying and Visualizing the Ontology of Systems Engineering Models

The credibility of an engineering model is of critical importance in large-scale projects. How concerned should an engineer be when reusing someone else's model when they may not know the author or be familiar with the tools that were used to create it? In this report, the authors advance engineers' capabilities for assessing models through examination of the underlying semantic structure of a model--the ontology. This ontology defines the objects in a model, types of objects, and relationships between them. In this study, two advances in ontology simplification and visualization are discussed and are demonstrated on two systems engineering models. These advances are critical steps toward enabling engineering models to interoperate, as well as assessing models for credibility. For example, results of this research show an 80% reduction in file size and representation size, dramatically improving the throughput of graph algorithms applied to the analysis of these models. Finally, four future problems are outlined in ontology research toward establishing credible models--ontology discovery, ontology matching, ontology alignment, and model assessment.

42 ENGINEERING↗

Constructing and Analyzing Metabolic Flux Models of Microbial Communities

Here we provide a broad overview of current research in modeling the growth and behavior of microbial communities, while focusing primarily on metabolic flux modeling techniques, including the reconstruction of individual species models, reconstruction of mixed-bag models, and reconstruction of multi-species models. We describe how flux balance analysis may be applied with these various model types to explore the interactions of a microbial community with its environment, as well as the interactions of individual species with each other. We demonstrate all discussed model reconstruction and analysis approaches using the Department of Energy’s Systems Biology Knowledgebase (KBase), constructing and importing genome-scale metabolic models of Bacteroides thetaiotaomicron and Faecalibacterium prausnitzii, and subsequently combining them into a community model of the gut microbiome. We also use KBase to explore how these species interact with each other and with the gut environment, exploring the trade-offs in information provided by applying each metabolic flux modeling approach. Overall, we conclude that no single approach is better than the others, and often there is much to be gained by applying multiple approaches synergistically when exploring the ecology of a microbial community.

59 BASIC BIOLOGICAL SCIENCES↗

Surrogate Modeling of Nonlinear Dynamic Systems: A Comparative Study

Surrogate models play a vital role in overcoming the computational challenge in designing and analyzing nonlinear dynamic systems, especially in the presence of uncertainty. This paper presents a comparative study of different surrogate modeling techniques for nonlinear dynamic systems. Four surrogate modeling methods, namely, Gaussian process (GP) regression, a long short-term memory (LSTM) network, a convolutional neural network (CNN) with LSTM (CNN-LSTM), and a CNN with bidirectional LSTM (CNN-BLSTM), are studied and compared. All these model types can predict the future behavior of dynamic systems over long periods based on training data from relatively short periods. The multi-dimensional inputs of surrogate models are organized in a nonlinear autoregressive exogenous model (NARX) scheme to enable recursive prediction over long periods, where current predictions replace inputs from the previous time window. Three numerical examples, including one mathematical example and two nonlinear engineering analysis models, are used to compare the performance of the four surrogate modeling techniques. The results show that the GP-NARX surrogate model tends to have more stable performance than the other three deep learning (DL)-based methods for the three particular examples studied. The tuning effort of GP-NARX is also much lower than its deep learning-based counterparts.

42 ENGINEERING↗

Cosmological parameter uncertainties from SALT-II type Ia supernova light curve models

We use simulated type Ia supernova (SN Ia) samples, including both photometry and spectra, to perform the first direct validation of cosmology analysis using the SALT-II light curve model. This validation includes residuals from the light curve training process, systematic biases in SN Ia distance measurements, and a bias on the dark energy equation of state parameter w. Using the SN-analysis package SNANA, we simulate and analyze realistic samples corresponding to the data samples used in the SNLS3 analysis: ∼120 low-redshift (z < 0.1) SNe Ia, ∼255 Sloan Digital Sky Survey SNe Ia (z < 0.4), and ∼290 SNLS SNe Ia (z ≤ 1). To probe systematic uncertainties in detail, we vary the input spectral model, the model of intrinsic scatter, and the smoothing (i.e., regularization) parameters used during the SALT-II model training. Using realistic intrinsic scatter models results in a slight bias in the ultraviolet portion of the trained SALT-II model, and w biases (w {sub input} – w {sub recovered}) ranging from –0.005 ± 0.012 to –0.024 ± 0.010. These biases are indistinguishable from each other within the uncertainty; the average bias on w is –0.014 ± 0.007.

79 ASTRONOMY AND ASTROPHYSICS↗

Analysis on a general class of holographic type dark energy models

We present a detail analysis on a general class of holographic type dark energy models characterized by the length scale L = 1/a{sup n}(t)∫{sub 0}{sup t}dt' a{sup m}(t'). We show that n ≥ 0 is required by the recent cosmic accelerated expansion of universe. In the early universe dominated by the constituent with constant equation of state w{sub m}, we have w{sub de} ≅ −1−2n/3 for n ≥ 0 and m < 0, and w{sub de} ≅ −(2/3)(n−m)+w{sub m} for n > m ≥ 0. The models with n > m ≥ 0 become single-parameter models like the ΛCDM model due to the analytic feature Ω{sub de} ≅ d{sup 2}/4(2m+3w{sub m}+3){sup 2}a{sup 2(n−m)} at radiation- and matter-dominated epoch. Whereas the cases n = m ≥ 0 should be abandoned as the dark energy cannot dominate the universe forever and there might be too large fraction of dark energy in early universe, and the cases m > n ≥ 0 are forbidden by the self-consistent requirement Ω{sub de} << 1 in the early universe. Thus a detailed study on the single-parameter models corresponding to cases n > m ≥ 0 is carried out by using recent observations. The best-fit analysis indicates that the conformal-age-like models with n = m+1, i.e. L∝1/Ha in early universe, are more favored and also the models with smaller n for the given n−m are found to fit the observations better. The equation of state of the dark energy in models with n = m+1 > 0 transits from w{sub de} < −1 during inflation to w{sub de} > −1 in radiation- and matter-dominated epoch, and then back to w{sub de} < −1 eventually. The best-fit result of the case (n = 0, m = −1) which is so-called ηHDE model proposed in (Huang 2012) is the most favorable model and compatible with the ΛCDM model.

79 ASTRONOMY AND ASTROPHYSICS↗