SEARCH · Search NASA

Results for “optical profiler”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

Mapping Aerosol Lidar Ratios Over Ocean using MODIS AOD Constrained Retrievals and GOCART Model Simulations

After 17 years, the NASA Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) mission ceased science operations in August 2023. For the final CALIPSO data products release (Version 5), the CALIPSO project seeks to improve the accuracy of its aerosol extinction by advancing knowledge of aerosol lidar ratios (i.e., extinction-to-backscatter ratios; LRs) for various aerosol types. The current algorithm assigns one LR value globally for each of the seven tropospheric aerosol types. The CALIPSO team aims to improve the retrieval algorithm through the development of regional and seasonal LR climatologies for the same aerosol types. In this study, aerosol LRs are inferred through Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) backscatter profiles constrained by collocated aerosol optical depth (AOD) from Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) data over oceans during daytime. This analysis is subsampled for those profiles that are cloud-free and contain only one CALIOP-classified aerosol type. The CALIOP profiles are then collocated with aerosol volume fractions obtained through Goddard Chemistry Aerosol Radiation and Transport (GOCART) model simulations. This presentation will reveal findings that the 12-year (June 2006-August 2018) mean spatial distributions of inferred aerosol LRs for CALIOP-classified marine and dusty marine aerosols correspond inversely with patterns of GOCART sea salt volume fraction (SSVF). For example, smaller SSVFs (< 65%) and larger LRs (> 55 sr), are found near land masses (Fig. 1). This indicates the influence of advected anthropogenic aerosols (e.g., pollution and biomass burning smoke). In the remote oceans (i.e., regions likely less impacted by non-sea salt aerosols), the SSVFs are larger (> 95%) and the LRs are smaller (< 25 sr) (Fig. 1). A polynomial fit of the MODIS AOD constrained LRs to the corresponding GOCART SSVFs (intersect values of ~58 sr for SSVF of 0% and ~21 sr for SSVF of 100%) is further used to produce model-assisted climatological LR maps on seasonal scales. Additionally, we will show results of a LR validation analysis for which we compare the revised CALIPSO AODs obtained by applying the seasonal/regional constrained LRs against CALIPSO Version 4.51 Ocean Derived Column Optical Depth (ODCOD). While the majority of the presentation will focus on LRs for CALIOP-classified marine and dusty marine aerosols, an overview of LR results will show preliminary results for other aerosol types over ocean, such as dust and elevated smoke. The technique demon-strated in this study highlights the benefits not only to the final planned CALIPSO data release in 2025, but similar methods can be applied to future spaceborne elastic backscatter lidars with collocated passive sensors (e.g., such as those associated with NASA’s proposed Atmosphere Observing System).

Travis D Toth↗

DOE OSTI2022

Improving OFDR Distributed Fiber Sensing by Fibers With Enhanced Rayleigh Backscattering and Image Processing

This article investigates using optical fibers with enhanced backscattering profiles to improve distributed fiber sensor performance and reduce instrumentation costs. Using a femtosecond (fs) laser direct writing technique, the Rayleigh backscattering profile of a standard telecom fiber was enhanced by more than 40 dB to improve the signal-to-noise ratio (SNR) for optical frequency domain reflectometry (OFDR). The enhanced backscattering signals enable effectively distributed strain measurements using a low-cost tunable laser (TL). Median filtering is applied to denoise cross correlation results to further improve measurement outcomes. Results presented in this article show that a TL with a 1-nm tuning range, which is far less than the tuning range used in commercial OFDR interrogators, can perform effectively distributed strain measurements using sensing fibers with enhanced backscattering profiles. The sensing fiber with over 40-dB backscattering enhancement achieved 4.8-cm spatial resolution in strain measurements with a root mean square accuracy of less than 2.70 με when 10–50 με were exerted to the sensing fiber. In conclusion, results presented in this article reveal both the potential and limitations of sensing fibers with enhanced backscattering for OFDR-based distributed fiber sensors.

42 ENGINEERING↗

NASA NTRS1973

Oceanographic mapping of structure and dynamics of the northern Gulf of California by the use of spectral modeling and ERTS-1

Distribution and flow of water masses at four depth intervals were determined by analyzing ERTS imagery through the use of optical models of classes of vertical oceanographic profiles. Data used for these models was obtained from shipboard measurements including surface spectral radiance, and optical and more conventional oceanographic depth profiles. The spectral models obtained were applied to radiance-contoured ERTS imagery in band 4, 5, 6, and 7. Features mapped by direct photointerpretation of ERTS imagery include submerged shoals, current streamlines, and location of possible upwellings, downwellings and submarine springs.

Lepley, L. K.↗

DOE OSTI2022

Optical Imaging for Understanding of Thermal Barrier Coated Piston Engine Performance

Thermal barrier coatings (TBC) applied to pistons have been a recently renewed research topic in the field of internal combustion engines. Single cylinder testing of a conventional C15™ Tier 4 final pro-duction steel piston and a TBC coated piston showed that the Yttrium stabilized Zirconia (YSZ) TBC did not significantly alter engine performance, with the TBC piston having slower combustion rates and higher criteria emissions. For deeper understanding, research continued by studying 3D-piston sections optically in a constant pressure vessel using photodiodes, four high-speed cameras (natural luminosity, CH*, and OH*), and visualization of the flame from two orthogonal directions. Particle Im-aging Velocimetry (PIV) algorithms were adapted to perform Combustion Imaging Velocimetry (CIV) to aid in quantification of the observed visual combustion flow field differences. The optical work showed that the TBC piston flame development is slower, spatially different, with lower mixing energy for the TBC variant. Geometric profiles of engine pistons and optical vessel 3D-piston sections were measured using a Coordinate Measurement Machine (CMM), and surface roughness was measured with a stylus surface profilometer. CMM results showed that the TBC piston bowl had reasonable macroscopic accuracy, but the rim had a larger radius with less reentrancy. A discussion of the results and analyses in relation to future TBC effort and direction concludes the work.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2020

Multifunctional light beam source for surface slope measuring long trace profilers

To fully exploit the advantages of fourth-generation synchrotron light sources, diffraction-limited-storage-rings (DLSR) and fully coherent free electron lasers (FELs), beamline mirrors and diffraction grating must be of exceptional quality. To achieve the required mirror and grating quality, the metrology instrumentation and methods used to characterize these challenging optics and, even more so, optical assemblies must also offer exceptional functionality and performance. One of the most widely used slope measuring instruments for characterizing x-ray optics is the long trace profiler (LTP). The easily reconfigurable mechanical design of the LTP allows optimization of the profiler arrangement to the specifics of a particular metrology task. Here, we discuss the optical schematic, design, and performance of an original multifunctional light beam source that provides functional flexibility of the LTP optical sensor. With this source, the LTP can be easily reconfigured for measurements of x-ray mirrors or diffraction gratings that have widely different source coherence requirements. Usage of a source with a low degree of coherence for mirror metrology helps to suppress the LTP systematic errors due to spurious interference effects in the LTP optical elements. A high-coherence narrow-band source is used for groove-density-distribution characterization of x-ray diffraction gratings. The systematic error and spatial resolution of the LTP with the different sources is also measured and analyzed.

Yashchuk, Valeriy V.↗

NASA NTRSDate not supplied

Airborne Lidar Measurements of Ozone and Aerosol Profiles Over Major US Metropolitan Areas

During field missions in 2021 and 2023, the airborne NASA Langley Research Center High Spectral Resolution Lidar 2 (HSRL 2) measured the temporal and spatial evolution of ozone and aerosol distributions impacting urban air quality over the four most populated cities in the United States. HSRL-2 measurements in 2021 were acquired over the Houston metropolitan region, including Galveston Bay and the Houston Ship Channel, as part of the NASA Tracking Aerosol Convection Experiment – Air Quality (TRACER-AQ) mission conducted in collaboration with the Department of Energy. HSRL-2 measurements were acquired over Los Angeles, Chicago, and New York City in 2023 as part of the NASA Synergistic TEMPO Air Quality Science (STAQS) mission conducted in collaboration with the NOAA Atmospheric Emissions and Reactions Observed from Megacities to Marine Areas (AEROMMA) mission. HSRL 2 provided nadir vertical profiles of ozone, aerosol backscatter, extinction, and depolarization as the aircraft flew lawnmower type patterns at 9 km for several hours over these urban areas. HSRL-2 measured profiles of aerosol extinction and aerosol optical depth (AOD) via the HSRL technique at 355 and 532 nm and profiles of aerosol backscatter and depolarization at 355, 532, and 1064 nm. Mixed Layer Heights (MLH) were derived by locating sharp vertical gradients in the profiles of aerosol backscatter. The flights were comprised of up to three repeating lawnmower patterns over each city showing the evolution of the ozone and aerosol distributions from the morning through the afternoon. The HSRL-2 measurements reveal ozone enhancements near the surface as well as in the free troposphere above the mixed layer. Some lidar measurements over Chicago and New York City show the daytime boundary layer growing into elevated layers of biomass burning aerosol. These layers complicate efforts to use column-integrated satellite measurements to infer surface air quality. As expected, mixed layer height (MLH) typically increased significantly during the day; however, during some flights, particularly over the Houston area, MLH also showed large spatial variability associated with changes in surface cover and/or small scale circulations. Often HSRL-2 measurements of AOD also showed large spatial and temporal variability throughout the day over these cities. We discuss how the ozone and aerosol profiles are averaged over different vertical and horizontal scales near the surface for use in assessments of regional air quality models and near-surface ozone retrievals from NASA’s recently launched Tropospheric Emissions: Monitoring Pollution (TEMPO) satellite.

Lidar↗

NASA NTRSDate not supplied

HSRL-2 Observations over the Houston, TX Region during TRACER-AQ

Lidar↗

NASA NTRS2012

High-Speed Scanning Interferometer Using CMOS Image Sensor and FPGA Based on Multifrequency Phase-Tracking Detection

A sub-aperture stitching optical interferometer can provide a cost-effective solution for an in situ metrology tool for large optics; however, the currently available technologies are not suitable for high-speed and real-time continuous scan. NanoWave s SPPE (Scanning Probe Position Encoder) has been proven to exhibit excellent stability and sub-nanometer precision with a large dynamic range. This same technology can transform many optical interferometers into real-time subnanometer precision tools with only minor modification. The proposed field-programmable gate array (FPGA) signal processing concept, coupled with a new-generation, high-speed, mega-pixel CMOS (complementary metal-oxide semiconductor) image sensor, enables high speed (>1 m/s) and real-time continuous surface profiling that is insensitive to variation of pixel sensitivity and/or optical transmission/reflection. This is especially useful for large optics surface profiling.

Ohara, Tetsuo↗

NASA NTRS2002

Lidar Observations of Tropospheric Aerosols Over Northeastern South Africa During the ARREX and SAFARI-2000 Dry Season Experiments

During the ARREX-1999 and SAFARI-2000 Dry Season experiments a micropulse lidar (523 nm) instrument was operated at the Skukuza Airport in northeastern South Africa. The Mar was collocated with a diverse array of passive radiometric equipment. For SAFARI-2000 the processed Mar data yields a daytime time-series of layer mean/derived aerosol optical properties, including extinction-to-backscatter ratios and vertical extinction cross-section profile. Combined with 523 run aerosol optical depth and spectral Angstrom exponent calculations from available CIMEL sun-photometer data and normalized broadband flux measurements the temporal evolution of the near surface aerosol layer optical properties is analyzed for climatological trends. For the densest smoke/haze events the extinction-to-backscatter ratio is found to be between 60-80/sr, and corresponding Angstrom exponent calculations near and above 1.75. The optical characteristics of an evolving smoke event from SAFARI-2000 are extensively detailed. The advecting smoke was embedded within two distinct stratified thermodynamic layers, causing the particulate mass to advect over the instrument array in an incoherent manner on the afternoon of its occurrence. Surface broadband flux forcing due to the smoke is calculated, as is the evolution in the vertical aerosol extinction profile as measured by the Han Finally, observations of persistent elevated aerosol during ARREX-1999 are presented and discussed. The lack of corroborating observations the following year makes these observation; both unique and noteworthy in the scope of regional aerosol transport over southern Africa.

Campbell, James R.↗

NASA NTRS2003

Theory of Fiber Optical Bragg Grating: Revisited

The reflected signature of an optical fiber Bragg grating is analyzed using the transfer function method. This approach is capable to cast all relevant quantities into proper places and provides a better physical understanding. The relationship between reflected signal, number of periods, index of refraction, and reflected wave phase is elucidated. The condition for which the maximum reflectivity is achieved is fully examined. We also have derived an expression to predict the reflectivity minima accurately when the reflected wave is detuned. Furthermore, using the segmented potential approach, this model can handle arbitrary index of refraction profiles and compare the strength of optical reflectivity of different profiles. The condition of a non-uniform grating is also addressed.

Tai, H.↗

NASA NTRS2001

Radiation Losses Due to Tapering of a Double-Core Optical Waveguide

The theoretical model we designed parameterizes the power losses as a function of .the profile shape for a tapered, single mode, optical dielectric coupler. The focus of this project is to produce a working model that determines the power losses experienced by the fibers when light crosses a taper region. This phenomenon can be examined using coupled mode theory. The optical directional coupler consists of a parallel, dual-channel, waveguide with minimal spacing between the channels to permit energy exchange. Thus, power transfer is essentially a function of the taper profile. To find the fields in the fibers, the approach used was that of solving the Helmholtz equation in cylindrical coordinates involving Bessel and modified Bessel functions depending on the location.

Lyons, Donald R.↗

NASA NTRS1978

Turbulence in planetary occultations. II - Effects on atmospheric profiles derived from Doppler measurements. III - Effects on atmospheric profiles derived from intensity measurements

The nature and magnitude of turbulence-induced errors in atmospheric profiles derived from Doppler measurements made during radio occultations are investigated. It is found that turbulence in planetary atmospheres induces both fluctuating and systematic errors in derived profiles, but the errors of both types are very small. Consideration of the occultation of Mariner 10 by Venus and of the Pioneer occultations by Jupiter shows that the rms fractional errors in the atmospheric profiles derived from these observations were less than 0.01 in both temperature and pressure, while the fractional systematic errors were typically of the order of 1 millionth. The extent to which atmospheric profiles derived from radio and optical intensity measurements are affected by turbulence is also examined. The results indicate that turbulence in planetary atmospheres has only a marginal effect on derived profiles in the weak-scattering limit and that the turbulence-induced errors in this case are always much larger than the corresponding errors in profiles derived from radio Doppler measurements.

Haugstad, B. S.↗

DOE OSTI2020

Optically anisotropic porous silicon microlenses with tunable refractive indexes and birefringence profiles

The effect of spatially varying birefringence on the focusing behavior of porous silicon (PSi) and porous silicon dioxide (PSiO 2 ) gradient refractive index (GRIN) lenses is investigated. Both materials attain broad, tunable refractive indexes and birefringence profiles, with PSi having a maximum birefringence of ~0.26 and PSiO 2 a reduced maximum birefringence of ~0.03 at 633 nm. These GRIN lenses exhibit polarization-dependent split focusing behavior, wherein the divergence angle between the twin foci increases with the birefringence gradient. PSi’s large birefringence allows the divergence angle to be tuned such that light focuses away from the center of the lens. These GRIN elements demonstrate how tunable birefringent materials can be used to engineer polarization-selective optical responses.

36 MATERIALS SCIENCE↗

NASA NTRS2007

Fiber Coupled Laser Diodes with Even Illumination Pattern

An optical fiber for evenly illuminating a target. The optical fiber is coupled to a laser emitting diode and receives laser light. The la ser light travels through the fiber optic and exits at an exit end. T he exit end has a diffractive optical pattern formed thereon via etch ing, molding or cutting, to reduce the Gaussian profile present in co nventional fiber optic cables The reduction of the Gaussian provides an even illumination from the fiber optic cable.

Howard, Richard T.↗

NASA NTRS1986

Methods for the solution of radiative transfer equation

To obtain an exact solution of the radiative-transfer equation in media where both absorption and scattering are significant, the usual approach is to use a numerical method. Three methods are known in the literature: invariant imbedding, eigenvalue-eigenfunction, and matrix doubling. This paper examines the practical application of these methods to the problem of emission from an inhomogeneous (Rayleigh) layer, the effects of layer parameters on the stability. It is found that invariant imbedding is most suitable for computing emission from an inhomogeneous layer with a temperature profile but tends to be unstable as the optical thickness of the layer increases beyond 0.5. On the other hand, the matrix-doubling method is stable for arbitrary optical thickness but is not suitable for handling multilayers. The eigenvalue-eigenfunction method is more stable than the invariant imbedding as optical thickness increases up to 2.0. It also permits temperature profile in the layer, but the computation is much more complicated. It is less stable than the matrix-doubling method when optical thickness is larger than 2.0. In general, the choice of a method is dependent on the nature of the problem.

Chen, M. F.↗

NASA NTRS1991

M.S.L.A.P. Modular Spectral Line Analysis Program documentation

MSLAP is a software for analyzing spectra, providing the basic structure to identify spectral features, to make quantitative measurements of this features, and to store the measurements for convenient access. MSLAP can be used to measure not only the zeroth moment (equivalent width) of a profile, but also the first and second moments. Optical depths and the corresponding column densities across the profile can be measured as well for sufficiently high resolution data. The software was developed for an interactive, graphical analysis where the computer carries most of the computational and data organizational burden and the investigator is responsible only for all judgement decisions. It employs sophisticated statistical techniques for determining the best polynomial fit to the continuum and for calculating the uncertainties.

Joseph, Charles L.↗

NASA NTRS1999

Realistic NLTE Radiative Transfer for Modeling Stellar Winds

This NASA grant supported the development of codes to solve the non-LTE multi-level spherical radiative transfer problem in the presence of velocity fields. Much of this work was done in collaboration with Graham Harper (CASA, University of Colorado). These codes were developed for application to the cool, low-velocity winds of evolved late-type stars. Particular emphasis was placed on modeling the wind of lambda Velorum (K4 lb), the brightest K supergiant in the sky, based on extensive observations of the ultraviolet spectrum with the HST/GHRS from GO program 5307. Several solution techniques were examined, including the Eddington factor Approach described in detail by Bennett & Harper (1997). An Eddington factor variant of Harper's S-MULTI code (Harper 1994) for stationary atmospheres was developed and implemented, although full convergence was not realized. The ratio of wind terminal velocity to turbulent velocity is large (approx. 0.3-0.5) in these cool star winds so this assumption of stationarity provides reasonable starting models. Final models, incorporating specified wind laws, were converged using the comoving CRD S-MULTI code. Details of the solution procedure were published by Bennett & Harper (1997). Our analysis of the wind of lambda Vel, based on wind absorption superimposed on chromospheric emission lines in the ultraviolet, can be found in Carpenter et al. (1999). In this paper, we compare observed wind absorption features to an exact CRD calculation in the comoving frame, and also to a much quicker, but approximate, method using the SEI (Sobolev with Exact Integration) code of Lamers, Cerruti-Sola, & Perinotto (1987). Carpenter et al. (1999) provide detailed comparisons of the exact CRD and approximate SEI results and discuss when SEI is adequate to use for computing wind line profiles. Unfortunately, the observational material is insufficient to unambiguously determine the wind acceleration law for lambda Vel. Relatively few unblended Fe II lines of optical depth sensitive to the wind acceleration region are present in the existing HST/GHRS data set. Most of the Fe II lines are either too optically thick (resulting in a board, black wind absorption profile) or too optically thin (resulting in no wind absorption feature present). Also, most of the ultraviolet spectra obtained from HST GO-5307 was at medium resolution (R approx. 40,000, corresponding to a velocity resolution of 7.5 km/s). This is simply inadequate to resolve the turbulence in the outer wind; a key parameter in theoretical wind models. We can now say that an unambiguous determination of the wind velocity law in lambda Vel will require complete coverage of the ultraviolet spectrum at high dispersion (R approx. 10(exp 5), or 3 km/s). This is now feasible usin, the STIS echelle spectrograph on-board HST.

Bennett, Philip D.↗

NASA NTRS2020

Shape Validation and RF Performance of Inflatable Antennas

Inflatable aperture antennas are an emerging technology that is being investigated for potential use in science and exploration missions. In particular, for missions to Mars and beyond, large deployable aperture antennas can provide the antenna gain required for high data rate communications, where the necessary antenna diameter exceeds the available volume of typical launch vehicle platforms. As inflatable aperture antennas have not been proven fully qualified for space missions, the author's Master's Thesis assessed the Ruze equation in characterizing this antenna technology. Inflatable aperture antennas do not follow a parabolic shape, and so the Ruze equation is not applicable due to the macroscopic shape errors of this technology. Therefore, geometric evaluations of the surface profile cannot simply correlate antenna gain degradation with the root-mean-square shape error with a parabolic surface. Consequently, the focus of this work was to derive an accurate mathematical model of an inflatable aperture antenna in order to characterize its Radio Frequency (RF) performance. Calculus of Variations methodologies were used to derive the surface profile shape of the inflatable aperture antenna. Physical Optics techniques were used to generate the antenna pattern profile. Validation testing of the predicted inflatable antenna shape model was performed through use of Laser Radar metrology measurements on an inflatable test article. Assessments of the RF performance of the inflatable aperture antenna, compared with nominally shaped paraboloidal antennas, were obtained through simulations of both technologies using a common diameter, depth, and arc length. Assessments of the RF performance of the inflatable aperture antenna was also performed against itself for changes in distance of the antenna feed location in the axial direction. Whereas the Ruze equation is limited to assessing gain reduction, this effort will also assess beam spreading and first side lobe angle and magnitude. The ability to characterize the RF response of this antenna will provide for an improved understanding of this technology. The accurate representation of the shape of this type of antenna technology will help to identify the most appropriate ways in which this technology could be utilized in planning future communication architectures for NASA missions to Mars and beyond.

Welch, Bryan W.↗