Search NASA⌕ Search

SEARCH · Search NASA

Results for “organic base”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Evaluating solvothermal and mechanochemical routes towards the metal–organic framework Mg 2 ( m -dobdc)

Metal–organic frameworks bearing coordinatively unsaturated Mg(II) sites are promising materials for gas storage, chemical separations, and drug delivery due to their low molecular weights and lack of toxicity. Furthermore, there remains a limited number of such MOFs reported in the literature. Herein, we investigate the gas sorption properties of the understudied framework Mg 2 (m-dobdc) (dobdc 4– = 4,6-dioxido-1,3-benzenedicarboxylate) synthesized under both solvothermal and mechanochemical conditions. Both materials are found to be permanently porous, as confirmed by 77 K N 2 adsorption measurements. In particular, Mg 2 (m-dobdc) synthesized under mechanochemical conditions using exogenous organic base displays one of the highest capacities reported to date (6.14 mmol g –1 ) for CO 2 capture in a porous solid under simulated coal flue gas conditions (150 mbar, 40 °C). As such, mechanochemically synthesized Mg 2 (m-dobdc) represents a promising new framework for applications requiring high gas adsorption capacities in a porous solid.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Spontaneous carrier generation and low recombination in high-efficiency non-fullerene solar cells

The current research reveals the unique photo physical properties and carrier generation mechanisms of high efficiency non-fullerene acceptor-based organic photovoltaic blends. The analysis of device performance, morphology, and photo physics reveals that the interface carrier generation cannot support the device's current output. It is seen that primary photon excitons can dissociate into charge carriers in Y6, which displays a time scale of ∼0.3 ps with polaron yields above 28% in neat and blended thin films. This characteristic in combination with a large exciton diffusion length enables high morphology tolerance in Y6-overloaded blends. The carrier generation process is also combined with recombination studies. The recombination rate quantified by flux-dependent transient absorption measurements yields less than 5% total recombination and nearly 0% geminate recombination. Furthermore, these results define the advantages of the Y6 non-fullerene acceptor (NFA) and reveal the fundamental importance of developing new NFA materials with superior photo physical properties.

14 SOLAR ENERGY↗
DOE OSTI2022

Antimony doping to enhance luminescence of tin ($\mathrm{IV}$)-based hybrid metal halides

Lead-based organic–inorganic metal halides (OIMHs) have recently attracted special attention due to their efficient broadband photoluminescence. However, the toxicity of lead poses a challenge for their further development. In this paper we selected Sn(IV) as the metal center to synthesize the environmentally friendly and stable luminescent OIMHs (C 9 H 15 N 3 ) 2 SnCI 8 and C 9 H 15 N 3 ) 2 SnBr 8 (C 9 H 13 N 3 is 1-(2-2-pyridyl)piperazine). Both compounds possess zero-dimensional structures, crystallizing in the monoclinic space group P2 1 /c, and their optical band gaps were experimentally determined to be 3.19 and 2.60 eV, respectively. Under UV excitation at room temperature, (C 9 H 15 N 3 ) 2 SnCI 8 exhibited double-peak emissions centered at 405 and 688 nm, which were attributed to the organic cation and inorganic octahedra, respectively. Upon introducing 5s 2 -lone-pair-containing Sb 3+ in (C 9 H 15 N 3 ) 2 SnCI 8 , self-trapped emission was promoted, and the photoluminescence quantum yield increased from ~1% to ~17.84%. This work suggests effective strategies for finding environmentally friendly stable OIMHs and for further enhancing the luminescence properties through lone-pair-containing cation doping.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Intermediate time sub-diffusion and stress relaxation in ring polymer melts

The slow dynamics of non-concatenated ring melts remains a frontier problem in polymer science with implications for many soft material environments including cellular biophysics. Here, in this work, we report large-scale simulations of model ring melts that analyze the monomer and center-of-mass (CM) mean square displacements (MSD) and stress relaxation function on intermediate time and length scales. The degree of dynamical slowing down is characterized by the maximally sub-diffusive fractional time scaling exponents. The data span an exceptionally wide range of ring degrees of polymerization and stiffnesses and are not successfully organized based on the classic measure linear chain entanglement, N/N e . Rather, we find that the crossover degree of polymerization, N D , based on ring macromolecular caging that successfully allows master curves to be constructed for the long-time CM self-diffusion constant also collapses these temporal dynamic scaling exponents. Different properties display different exponents and exhibit one or two regimes of linear variation with the logarithm of N D / N . A distinct crossover of the CM-MSD and stress relaxation exponents emerges at sufficiently large N or stiffness that is not found for the monomer MSD, indicating a novel form of dynamic decoupling. This crossover aligns with the predicted critical degree of polymerization for transitioning from a weak to strong caging regime, indicative of activated transport. The latter may reflect the emergence of an intermolecular collective contribution to stress in analogy with dense soft colloidal matter. Suggestions are made for future theoretical work to address the rich patterns of behavior discovered.

Anomalous diffusion↗
DOE OSTI2025

Physical models reveal indirect reader protein interactions that facilitate epigenetic crosstalk

The spatial organization of chromatin is governed by epigenetic factors, including epigenetic marks and the reader proteins that bind them. By dictating the accessibility of genomic loci, epigenetic factors contribute to the physical regulation of gene expression, enabling diverse cellular phenotypes to be encoded by a shared genome in an individual. Epigenetic dysregulation can lead to aberrations in chromatin architecture, contributing to diseases such as neurological disorders and cancers. Despite the known importance of chromatin organization for human health, the physical mechanisms governing chromatin folding remain underspecified. In this work, we develop a physical model of chromatin organization based on contributions from multiple epigenetic factors. Using our model, we evaluate how conditions in the nuclear environment and crosstalk between epigenetic marks affect the compartmentalization of chromatin into dense heterochromatin and loose euchromatin. Our results emphasize the role of reader protein binding in chromatin compartmentalization. We show that reader proteins interact through an indirect mechanism facilitated by the shared chromatin “scaffold” to which they bind. Under a scenario where reader proteins compete for binding sites, we find that indirect interactions affect the program adopted by the chromatin fiber. By isolating indirect modes of epigenetic crosstalk, we demonstrate how the interplay between epigenetic patterning and environmental factors influences chromatin architecture.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Discriminating Uranium Isotopes Based on Fission Signatures Induced by Delayed Neutrons

The use of active interrogation to induce delayed neutron emission is a well-established technique for the characterization of special nuclear materials. Delayed neutrons have isotope-characteristic spectral and temporal signatures, which provide the basis for isotope identification. However, in bulk materials that contain an appreciable fissile (e.g., 235 U or 233 U) fraction, such as highly enriched uranium (HEU), delayed neutrons have a high probability of inducing additional fissions. As a result, the overall delayed neutron signature consists of two distinct components: the “primary” delayed neutrons (emitted directly by fission fragments) and the “secondary prompt” fission neutrons produced in fission induced by primary delayed neutrons. These prompt products differ from “primary” delayed neutrons both in their energy spectra and in the presence of coincident radiation released by the parent fission event. The presence and relative quantity of prompt products from delayed fission depend on the cross section of the material in the energy range of delayed neutrons, which may differ significantly between isotopes, thus providing an exploitable means for isotope differentiation. Here, we demonstrate two experimental approaches for discriminating between 235 U and 238 U isotopes based on the measurement of delayed neutron-induced fission products. First, HEU and depleted uranium objects are differentiated through the detection of high-energy prompt neutrons from delayed fission using both recoil-based organic liquid scintillators and thermalization spectra from a custom-built capture-gated composite detector. Secondly, coincident radiation measurements are used as the basis for discrimination by comparing the overall rates and time evolution of fission events when delayed neutrons are present.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2023

Butterfly biodiversity increases with prairie strips and conservation management in row crop agriculture

Abstract Butterfly abundances are declining globally, with meta‐analysis showing a rate of −2% per year. Agriculture contributes to butterfly decline through habitat loss and degradation. Prairie strips—strips of farmland actively restored to native perennial vegetation—are a conservation practice with the potential to mitigate biodiversity loss, but their impact on butterfly biodiversity is not known. Working within a 30‐year‐old experiment that varied land use intensity, from natural areas to croplands (maize–soy–wheat rotation), we introduced prairie strips to less intensely managed crop treatments. Treatments included conservation land, biologically based (organic) row crops with prairie strips, reduced input row crops with prairie strips, no‐till row crops and conventional row crops. We measured butterfly abundance and richness: (1) within prairie strips and (2) across the gradient of land use intensity at the plot level. Butterfly abundance was higher within prairie strips than in all other treatments. Across the land use intensity gradient at the plot level, the conservation land treatment had the highest abundance, treatments with prairie strips had intermediate levels and no‐till and conventional treatments had the lowest abundances. Also across entire plots, butterfly richness increased as land use intensity decreased. Treatments with prairie strips, which also had reduced land use intensity, had distinct butterfly communities as they harboured several butterfly species that were not found in other row crop treatments. In addition to the known effects of prairie strips on ecosystem services including erosion control and increased water quality, prairie strips can increase biodiversity in multifunctional landscapes.

Kemmerling, Lindsey R.↗
DOE OSTI2020

Mechanistic Insights in Quinone-Based Zinc Batteries with Nonaqueous Electrolytes

Three quinone-based organic electrodes were tested in nonaqueous Zn-batteries using different salts and solvents. The Zn(TFSI)(2)/acetonitrile system exhibited the best performance due to its excellent transport and electrochemical properties. The mechanistic studies on the electrode kinetics were also carried out. While 2,5-dimethoxybenzoquinone (DMBQ) displayed a typical faradaic battery behavior, its polymeric derivatives showed a slow charge transfer inside the polymeric film as depicted by cyclic voltammograms. (C) 2020 The Electrochemical Society ("ECS"). Published on behalf of ECS by IOP Publishing Limited.

organic electrode, electrolyte, mechanism↗
DOE OSTI2020

Electrochemical CO 2 Utilization: Scalable System Operation for Formic Acid Production

In recent years, research into the electrochemical reduction of CO 2 has grown exponentially. Formic acid (FA) has become a particular value product from CO 2 due to its versatility [1], optimal atom economy [2], and thermodynamic favorable [3]. FA can be produced electrochemically via a direct two-electron transfer process involving CO 2 with a proton source, requiring less energy input and fewer reaction steps than the conventional Kemira process. However, product selectivity, electrode stability, and low faradic efficiency due to increased resistance under constant current, remain key issues for CO 2 reduction to FA [4]. University of Kentucky’s Center for Applied Energy Research (UK CAER) is currently investigating reactor designs to address the challenges associated with electrochemical CO 2 conversion to FA [5]. The current reactor system employs: (1) an organic-based charge carrier which shuttles charge directly to the catalyst to enable CO 2 reduction to FA; (2) novel electrode materials to mitigate large voltages and improve conductivity; and (3) a flow system which not only allows for the volumetric scale-up of both charge carrier and catalyst, but also decouples the charger carrier re-energized and FA production processes to protect the catalyst’s stability due to overpotential. Through careful adjustment of electrode, charge carrier, and electrolyte selection, cell resistances have decreased by over 15%, facilitating conduction necessary for effective CO 2 reduction to FA. The system uses a highly specific engineered catalyst, which has produced over 100 mM FA at a rate of over 10 mM FA/hour following the aforementioned electrode/charge carrier changes. System design considerations (flow rate, bulk volume) and modeling of the system will also be discussed.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2021

w19_OMEC Scientific Highlight [Slides]

Used DFT to identify likely experimental limitations for realizing high HER activity for DPA-based organic molecular electrocatalysts (OMEC) systems, directly guiding future experiments

08 HYDROGEN↗
DOE OSTI2021

Solar Plus: Strategies for Oregon and Washington

The Solar Plus initiative convened leaders from the State Energy Offices in Oregon and Washington, plus representatives from utilities, regulators, the solar industry and community-based organizations to tap into the region’s unique opportunities to develop distributed solar with an emphasis on equity and inclusion of vulnerable communities.

14 SOLAR ENERGY↗
DOE OSTI2022

Advanced Heterogeneous Integration Enabled by 3D Freestanding Membranes—From Material Growths to Applications

For the future of electronics such as bioelectronics, 3D integrated electronics, and bendable electronics, the need for flexibility and stackability of electronic products has substantially grown up. However, conventional wafer-based single-crystalline semiconductors cannot catch up with such trends because they are bound to thick rigid wafers such that they are neither flexible nor stackable. Although polymer-based organic electronic materials are more compatible as they are mechanically compliant and less costly than inorganic counterparts, their electronic/photonic performance is substantially inferior to that of single-crystalline inorganic materials. Such performance-mechanical compliance dilemma could be resolved by developing methods to obtain cheap, flexible, stackable, single-crystalline inorganic systems. Such dream electronic systems could be realized by producing single-crystalline freestanding membranes. For the past few decades, various layer transfer techniques (a.k.a layer liftoff techniques) have been developed to produce single-crystalline freestanding membranes. In today's talk, I will present the survey of the layer liftoff techniques and go over how these strategies unlock new ways of manufacturing advanced electronic systems. In addition, I will introduce unprecedented artificial heterostructure devices enabled by stacking of those freestanding 3D material membranes, e.g., the world's smallest vertically-stacked full-color micro-LEDs, the world's best multiferroic devices, chip-less wireless e-skin, and reconfigurable hetero-integrated chips with AI accelerators.

Kim, Jeehwan↗
DOE OSTI2022

Advanced Heterogeneous Integration Enabled by 3D Freestanding Membranes—From Material Growths to Applications

For the future of electronics such as bioelectronics, 3D integrated electronics, and bendable electronics, the need for flexibility and stackability of electronic products has substantially grown up. However, conventional wafer-based single-crystalline semiconductors cannot catch up with such trends because they are bound to thick rigid wafers such that they are neither flexible nor stackable. Although polymer-based organic electronic materials are more compatible as they are mechanically compliant and less costly than inorganic counterparts, their electronic/photonic performance is substantially inferior to that of single-crystalline inorganic materials. Such performance-mechanical compliance dilemma could be resolved by developing methods to obtain cheap, flexible, stackable, single-crystalline inorganic systems. Such dream electronic systems could be realized by producing single-crystalline freestanding membranes. For the past few decades, various layer transfer techniques (a.k.a layer liftoff techniques) have been developed to produce single-crystalline freestanding membranes. In today's talk, I will present the survey of the layer liftoff techniques and go over how these strategies unlock new ways of manufacturing advanced electronic systems. In addition, I will introduce unprecedented artificial heterostructure devices enabled by stacking of those freestanding 3D material membranes, e.g., the world's smallest vertically-stacked full-color micro-LEDs, the world's best multiferroic devices, chip-less wireless e-skin, and reconfigurable hetero-integrated chips with AI accelerators.

Kim, Jeehwan↗
DOE OSTI2023

Community Centered Solar Development (CCSD) Case Study Interviews [Slides]

Large-scale solar (LSS, defined here as ground-mounted photovoltaic projects ≥1 MWDC) has grown rapidly in the U.S., accounting for nearly half of new electric generating capacity added to the U.S. grid in 2022. All sources of electricity bring positive and negative impacts to hosting communities and the rapid growth of LSS has increased the urgency to understand those impacts. Yet, information about the potential positive and negative impacts of LSS on host communities, and the factors or drivers leading to support or opposition to a project, is lacking. This information gap limits how project developers, municipalities, and local siting authorities can address community concerns and appropriately align proposed projects to best suit and benefit local communities. As part of Berkeley Lab’s Community-Centered Solar Development (CCSD) project, this research set out to explore deep insights and perceptions from LSS stakeholders that only qualitative data can provide to identify key factors driving project success or threatened failure. Case studies, such as those utilized in this research, are uniquely adept at capturing the subjective experience of individuals and at identifying variables, structures, and interactions between stakeholders. Our case studies included 54 semi-structured interviews across 7 different LSS sites, representing a diversity of geographies, project sizes (MW), site types (i.e., greenfield, agrivoltaic, and brownfield / contaminated sites), zoning jurisdiction types, and more (Table 1). In addition to local residents living in close proximity to these LSS sites, we interviewed other key stakeholders involved in the projects such as developers, decision-makers, utility representatives, landowners, and individuals from community-based organizations. The overarching aim of this case study research was two-fold: (1) to inform subsequent tasks in the CCSD research project (including an upcoming national survey of LSS neighbors), and (2) to provide insights into the following set of research questions: -What are the key positive and negative drivers leading to support and opposition to LSS projects? -To what extent do LSS projects exacerbate or mitigate perceived inequities and marginalization within hosting communities and how can those inequities be mitigated going forward? -What strategies can communities employ to align LSS development with local land-use plans and community needs and values? The research findings and next steps are described in this slide deck report.

14 SOLAR ENERGY↗
DOE OSTI2023

LA100 Equity Strategies. Chapter 2: Procedural Justice

The LA100 Equity Strategies project synthesizes community guidance with robust research, modeling, and analysis to identify strategy options that can increase equitable outcomes in Los Angeles' clean energy transition. Grounded in the analysis of past and ongoing energy inequities and engagement with underserved communities, the project presents community-guided and community-tailored strategies that aim to operationalize recognition and procedural justice. This chapter focuses on procedural justice, examining priorities identified during the community engagement portion of the LA100 Equity Strategies project. This process, and our approach to partnering with community-based organizations (CBOs) and the communities they serve, was developed from the baseline analysis in Chapter 1, which centers on recognition justice, examining past and current inequities in LA. Recognition, procedural, and distributional justice are the three tenets of energy justice around which the LA100 Equity Strategies project is organized. Procedural justice prioritizes fair, equitable, and inclusive participation in the decision-making process. This tenet's practical application entails who is invited and able to participate, whose voices are considered as decisions are made, the co-development of procedures to inform this deliberative process, and who has access to formal measures of regulation and accountability. Engaging with Angelenos to examine the causes of inequities and identify impact areas and priorities that center community experiences, values, and goals represents a first step in developing energy equity strategies for the Los Angeles Department of Water and Power (LADWP) to achieve distributional justice - the just and equitable distribution of energy benefits and burdens in LA's energy transition. Equity, as community members insisted, is about making - and following through with - a commitment to prioritize historically underserved and overburdened communities. Community engagement is a principal method for operationalizing this commitment, guiding our analytic approach and potential equity strategies. Using procedural justice as an analytical tool, this chapter presents the LA100 Equity Strategies approach to community engagement from 2021 to 2023 and the results of this process in relation to community-identified barriers and burdens impacting procedural justice outcomes. We analyze the procedural elements of reaching the equity goals Angelenos set to inform future LADWP decision-making and program development.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

State Energy Justice Roundtable Series: Energy Justice Metrics

The National Association of Regulatory Utility Commissioners (NARUC), National Association of State Energy Officials (NASEO), and National Governors Association (NGA) hosted a State Energy Justice Roundtable (Roundtable) in April 2022. Participants included federal and state decision-makers, members of community-based organizations, and subject-matter experts. The Roundtable members explored current state efforts to articulate and incorporate energy justice concerns into energy-related decision-making. Participants established connections with one another to better understand the current landscape of existing resources, learn about emerging efforts, and identify ongoing support opportunities for advancing energy justice.This paper is one of five authored by the host organizations on topics that were the focus of the Roundtable. Each paper summarizes key themes, emerging efforts, and group takeaways that were discussed at the Roundtable and should assist state members in developing and meeting their own state goals around energy justice. The papers all include the same discussions of background, introduction, and reading list so they can be read separately. Each paper is written from the perspective of one association and includes options for its members to take actions that could support more equitable state energy policies and programs. The five papers cover: (1) Participation in decision making (NARUC), (2) Customer affordability and arrearages (NARUC), (3) Energy justice metrics (NARUC), (4) Equity in clean energy research and development (NASEO), and (5) Equitable distributed energy resource (DER) access (NGA). The resources and recommendations listed in these papers are not meant to be exhaustive, as this field of study continues to evolve. Although this brief is focused on electricity, energy justice considerations extend to all energy needs and services, including the impact of energy extraction, processing, and distribution functions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗