Search NASA⌕ Search

SEARCH · Search NASA

Results for “parameter transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Comparisons of Solar Wind Coupling Parameters with Auroral Energy Deposition Rates

Measurement of the global rate of energy deposition in the ionosphere via auroral particle precipitation is one of the primary goals of the Polar UVI program and is an important component of the ISTP program. The instantaneous rate of energy deposition for the entire month of January 1997 has been calculated by applying models to the UVI images and is presented by Fillingim et al. In this session. A number of parameters that predict the rate of coupling of solar wind energy into the magnetosphere have been proposed in the last few decades. Some of these parameters, such as the epsilon parameter of Perrault and Akasofu, depend on the instantaneous values in the solar wind. Other parameters depend on the integrated values of solar wind parameters, especially IMF Bz, e.g. applied flux which predicts the net transfer of magnetic flux to the tail. While these parameters have often been used successfully with substorm studies, their validity in terms of global energy input has not yet been ascertained, largely because data such as that supplied by the ISTP program was lacking. We have calculated these and other energy coupling parameters for January 1997 using solar wind data provided by WIND and other solar wind monitors. The rates of energy input predicted by these parameters are compared to those measured through UVI data and correlations are sought. Whether these parameters are better at providing an instantaneous rate of energy input or an average input over some time period is addressed. We also study if either type of parameter may provide better correlations if a time delay is introduced; if so, this time delay may provide a characteristic time for energy transport in the coupled solar wind-magnetosphere-ionosphere system.

Elsen, R.↗

Correlating downward flame spread rates for thick fuel beds

Flame spread rates are presented for polymethylmethacrylate fuel beds as a function of gravitational acceleration and ambient pressure and oxygen concentration. The data are correlated by plotting a dimensionless spread rate that is a measure of the heat transferred forward of the flame, required to sustain the flame, compared to the maximum possible forward heat transfer against a Damkoehler number. The latter parameter indicates the approach of the flame to its maximum temperature, where the maximum possible forward heat transfer occurs, such that the dimensionless spread rate approaches unity at large Damkoehler number. Surface regression effects on the flame spread process are incorporated into the dimensionless spread rate, and the final correlation is independent of bed thickness.

Altenkirch, R. A.↗

The acoustical structure of highly porous open-cell foams

This work concerns both the theoretical prediction and measurement of structural parameters in open-cell highly porous polyurethane foams. Of particular interest are the dynamic flow resistance, thermal time constant, and mass structure factor and their dependence on frequency and geometry of the cellular structure. The predictions of cell size parameters, static flow resistance, and heat transfer as accounted for by a Nusselt number are compared with measurement. Since the static flow resistance and inverse thermal time constant are interrelated via the 'mean' pore size parameter of Biot, only two independent measurements such as volume porosity and mean filament diameter are required to make the predictions for a given fluid condition. The agreements between this theory and nonacoustical experiments are excellent.

Lambert, R. F.↗

Estimation of canopy parameters for inhomogeneous vegetation canopies from reflectance data. III - TRIM: A model for radiative transfer in heterogeneous three-dimensional canopies

A model for radiative transfer in heterogeneous three-dimensional canopies such as those found in forests is proposed. Its use in estimating important biophysical variables such as leaf area index and canopy architecture from bidirectional canopy reflectance data is discussed. The model and its use in estimating canopy parameters through its inversion are validated with measured canopy reflectance data for corn canopies.

Goel, Narendra S.↗

Fundamental electrode kinetics

Report presents the fundamentals of electrode kinetics and the methods used in evaluating the characteristic parameters of rapid-charge transfer processes at electrode-electrolyte interfaces. The concept of electrode kinetics is outlined, followed by the principles underlying the experimental techniques for the investigation of electrode kinetics.

Elder, J. P.↗

Computer enhancement of radiographs

Examination of three relevant noise processes and the image degradation associated with Marshall Space Flight Center's (MSFC) X-ray/scanning system was conducted for application to computer enhancement of radiographs using MSFC's digital filtering techniques. Graininess of type M, R single coat and R double coat X-ray films was quantified as a function of density level using root-mean-square (RMS) granularity. Quantum mottle (including film grain) was quantified as a function of the above film types, exposure level, specimen material and thickness, and film density using RMS granularity and power spectral density (PSD). For various neutral-density levels the scanning device used in digital conversion of radiographs was examined for noise characteristics which were quantified by RMS granularity and PSD. Image degradation of the entire pre-enhancement system (MG-150 X-ray device; film; and optronics scanner) was measured using edge targets to generate modulation transfer functions (MTF). The four parameters were examined as a function of scanning aperture sizes of approximately 12.5 25 and 50 microns.

Dekaney, A.↗

Description of the docking module ECS for the Apollo-Soyuz Test Project.

The role of the Docking Module ECS (Environmental Control System) to be used on the Apollo-Soyuz Test mission is to provide a means for crewmen to transfer safely between the Apollo and Soyuz vehicles in a shirtsleeve environment. This paper describes the Docking Module ECS and includes the philosophy and rationale used in evaluating and selecting the capabilities that are required to satisfy the Docking Module's airlock function: (1) adjusting the pressure and composition of the atmosphere to effect crew transfer and (2) providing a shirtsleeve environment during transfer operations. An analytical evaluation is given of the environmental parameters (including CO2 level, humidity, and temperature) during a normal transfer timeline.

Guy, W. W.↗

Carbonaceous materials subjected to extreme heating - A comparison of numerical simulation and experiments

The ablation of carbonaceous materials in a hydrogen-helium stream has been simulated using a charring materials ablator computer code. These results are compared with the first ablation data to be obtained from the Ames-NASA Giant Planet Pilot Facility. Test stream diagnostics and ablation effects on convective and radiative heat transfer are discussed since these parameters constitute important input data to the numerical simulation. Graphite ablation was predicted to within 10 to 20%, and carbon-phenolic somewhat less accurately.

Davy, W. C.↗

Solar heating of the Martian dusty atmosphere

This paper examines the solar heating of the Martian atmosphere during the 1971 global dust storm observed by Mariner 9. Radiative scattering as well as absorption is included by utilizing the delta-Eddington approximation to the full radiative transfer equation. The necessary optical parameters are generated by a Mie program which uses a size distribution and a complex refractive index inferred from a number of sources, particularly from recent analyses of Mariner 9 UVS and TV observations. When uniform mixing of the dust is assumed, the solar heating per unit mass during a Martian global dust storm is remarkably uniform with height for small solar zenith angles. Heating rates may reach 80 K/day for overhead sunlight. Overall, 20% of the direct insolation is absorbed by the dust-laden atmosphere. Even optically thin widespread dust hazes may produce heating rates of several degrees Kelvin per day.

Zurek, R. W.↗

Theoretical interpretation of photometric properties of the Martian surface and atmosphere

Earth-based UBV photometry, photographs from the Lowell Observatory, and Mariner 9 data are combined with a new radiative transfer theory to derive physical parameters for the Martian surface and atmosphere, both before and during the 1971 dust storm. Storm dust particles had a single scattering albedo of 0.84 plus or minus 0.02 and an asymmetry factor of 0.35 plus or minus 0.10 in green (V) light. The geometric albedo of Mars was 0.15 and the phase integral 1.83, yielding 0.27 for the Bond albedo. The mean optical thickness of the 'clear' atmosphere averaged over the whole planet was 0.15 plus or minus 0.05 and was not dependent on wavelength. Geometric albedos for the surface are 0.25 (light areas) and 0.17 (dark areas) in V, 0.095 in B, and 0.060 in U. The soil particles are moderately backward scattering with an asymmetry factor of minus 0.20, and therefore rather opaque. The mean surface roughness is 0.57, representing the depth/radius ratio of an average hole, and being only one-half as large as values typical for the moon and asteroids.

Lumme, K.↗

Radiometric measurements over bare and vegetated fields at 1.4 GHz and 5 GHz frequencies

Microwave emission from bare and vegetated fields was measured with dual polarized radiometers at 1.4 GHz and 5 GHz frequencies. The measured brightness temperatures over bare fields are shown to compare favorably with those calculated from radiative transfer theory with two constant parameters characterizing surface roughness effect. The presence of vegetation cover is found to reduce the sensitivity to soil moisture variation. This sensitivity reduction is generally pronounced the denser, the vegetation cover and the higher the frequency of observation. The effect of vegetation cover is also examined with respect to the measured polarization factor at both frequencies. With the exception of dry corn fields, the measured polarization factor over vegetated fields is found appreciably reduced compared to that over bare fields. A much larger reduction in this factor is found at 5GHz than at 1.4GHz frequency.

Wang, J. R.↗

Prediction of molecular infrared band and line intensities

The general problem of predicting infrared intensities is examined. The problem of predicting line intensities is discussed with attention focussed specifically on the problem of predicting vibrational strengths (or total band intensities). Two methods are considered: predictions based on ab initio quantum mechanical calculations, and predictions based on the transfer of atomic polar tensor parameters from small model molecules to the molecule of interest. Comparisons of predicted spectra with experimental spectra are shown for CH3OH, CH3OCH3, C2H5OH, and HOC2. It is suggested that the most important application of this work may be to the prediction of intensities for free radicals, ions, and reactive intermediates so that the infrared spectrum can be used in the quantitative analysis for these interesting species.

Person, W. B.↗

Axial-compressor flow distortion with water ingestion

The objective of the investigation is as follows: to establish relations between the steady state mean flow distortion generated during water ingestion into an axial-flow compressor and (a) characteristic length and time scales pertaining to (1) the centrifugal action and (2) the heat and mass transfer processes and (b) aerodynamic parameters based on blade geometry, aspect ratio and blade loading. Analytical and experimental results are presented for a small compressor to illustrate the extent of the distortion introduced as a function of (1) the operating speed and (2) the mass-based water content in the ingested mixture. Methods of scaling the effects in compressors of different sizes are discussed.

Tsuchiya, T.↗

Thermal microwave emission from vegetated fields - A comparison between theory and experiment

The radiometric measurements over bare field and fields covered with grass, soybean, corn, and alfalfa were made with 1.4- and 5-GHz microwave radiometers during August-October 1978. The measured results are compared with radiative transfer theory treating the vegetated fields as a two-layer random medium. It is found that the presence of a vegetation cover generally gives a higher brightness temperature T sub B than that expected from a bare soil. The amount of this T sub B excess increases with increase in the vegetation biomass and in the frequency of the observed radiation. The results of radiative transfer calculations, which include a parameter characterizing ground surface roughness, generally match well with the experimental data.

Wang, J. R.↗

Overview of free-piston Stirling engine technology for space power application

An overview is presented of free-piston Stirling engine activities, directed toward space power applications. One of the major elements of the program is the development of advanced power conversion. Under this program the status of the 25 kWe opposed-piston Space Power Demonstrator Engine (SPDE) is presented. Initial differences between predicted and experimental power outputs and power output influenced by variations in regenerators are discussed. Technology work was conducted on heat-exchanger concepts to minimize the number of joints as well as to enhance the heat transfer in the heater. Design parameters and conceptual design features are also presented for a 25 kWe, single-cylinder free-piston Stirling space power converter. Projections are made for future space power requirements over the next few decades along with a recommendation to consider the use of dynamic power conversion systems, either solar or nuclear. A cursory comparison is presented showing the mass benefits of a Stirling system over a Brayton system for the same peak temperature and output power. A description of a study to investigate the feasibility of scaling a single-cylinder free-piston Stirling space power module to the 150 kWe power range is presented.

Slaby, Jack G.↗

A self-consistency approach to improve microwave rainfall rate estimation from space

A multichannel statistical approach is used to retrieve rainfall rates from the brightness temperature T(B) observed by passive microwave radiometers flown on a high-altitude NASA aircraft. T(B) statistics are based upon data generated by a cloud radiative model. This model simulates variabilities in the underlying geophysical parameters of interest, and computes their associated T(B) in each of the available channels. By further imposing the requirement that the observed T(B) agree with the T(B) values corresponding to the retrieved parameters through the cloud radiative transfer model, the results can be made to agree quite well with coincident radar-derived rainfall rates. Some information regarding the cloud vertical structure is also obtained by such an added requirement. The applicability of this technique to satellite retrievals is also investigated. Data which might be observed by satellite-borne radiometers, including the effects of nonuniformly filled footprints, are simulated by the cloud radiative model for this purpose.

Kummerow, Christian↗

Design challenges for space bioreactors

The design of bioreactors for operation under conditions of microgravity presents problems and challenges. Absence of a significant body force such as gravity can have profound consequences for interfacial phenomena. Marangoni convection can no longer be overlooked. Many speculations on the advantages and benefits of microgravity can be found in the literature. Initial bioreactor research considerations for space applications had little regard for the suitability of the designs for conditions of microgravity. Bioreactors can be classified in terms of their function and type of operation. The complex interaction of parameters leading to optimal design and operation of a bioreactor is illustrated by the JSC mammalian cell culture system. The design of a bioreactor is strongly dependent upon its intended use as a production unit for cell mass and/or biologicals or as a research reactor for the study of cell growth and function. Therefore a variety of bioreactor configurations are presented in rapid summary. Following this, a rationale is presented for not attempting to derive key design parameters such as the oxygen transfer coefficient from ground-based data. A set of themes/objectives for flight experiments to develop the expertise for design of space bioreactors is then proposed for discussion. These experiments, carried out systematically, will provide a database from which engineering tools for space bioreactor design will be derived.

Seshan, P. K.↗

Noncontact measurement of high temperature using optical fiber sensors

The primary goal of this research program was the investigation and application of noncontact temperature measurement techniques using optical techniques and optical fiber methods. In particular, a pyrometer utilizing an infrared optical light pipe and a multiwavelength filtering approach was designed, revised, and tested. This work was motivated by the need to measure the temperatures of small metallic pellets (approximately 3 mm diameter) in free fall at the Microgravity Materials Processing Drop Tube at NASA Marshall Space Flight Center. In addition, research under this program investigated the adaptation of holography technology to optical fiber sensors, and also examined the use of rare-earth dopants in optical fibers for use in measuring temperature. The pyrometer development effort involved both theoretical analysis and experimental tests. For the analysis, a mathematical model based on radiative transfer principles was derived. Key parameter values representative of the drop tube system, such as particle size, tube diameter and length, and particle temperature, were used to determine an estimate of the radiant flux that will be incident on the face of an optical fiber or light pipe used to collect radiation from the incandescent falling particle. An extension of this work examined the advantage of inclining or tilting the collecting fiber to increase the time that the falling particle remains in the fiber field-of-view. Those results indicate that increases in total power collected of about 15 percent may be realized by tilting the fiber. In order to determine the suitability of alternative light pipes and optical fibers, and experimental set-up for measuring the transmittance and insertion loss of infrared fibers considered for use in the pyrometer was assembled. A zirconium fluoride optical fiber and several bundles of hollow core fiber of varying diameters were tested. A prototype two-color pyrometer was assembled and tested at Virginia Tech, and then tested on the Drop Tube at Marshall Space Flight Center. Radiation from 5 mm diameter niobium drops falling in the Drop Tube was successfully detected, and recorded for later analysis. Subsequent analysis indicated that the imaging of light output from the light pipe onto the detector active areas was not identical for both detectors.

Claus, R. O.↗