Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

A High-Rate, Single-Crystal Model including Phase Transformations, Plastic Slip, and Twinning

An anisotropic, rate-­dependent, single-­crystal approach for modeling materials under the conditions of high strain rates and pressures is provided. The model includes the effects of large deformations, nonlinear elasticity, phase transformations, and plastic slip and twinning. It is envisioned that the model may be used to examine these coupled effects on the local deformation of materials that are subjected to ballistic impact or explosive loading. The model is formulated using a multiplicative decomposition of the deformation gradient. A plate impact experiment on a multi-­crystal sample of titanium was conducted. The particle velocities at the back surface of three crystal orientations relative to the direction of impact were measured. Molecular dynamics simulations were conducted to investigate the details of the high-­rate deformation and pursue issues related to the phase transformation for titanium. Simulations using the single crystal model were conducted and compared to the high-­rate experimental data for the impact loaded single crystals. The model was found to capture the features of the experiments.

36 MATERIALS SCIENCE↗

A phase-field model for non-isothermal phase transformation and plasticity in polycrystalline yttria-stabilized tetragonal zirconia

Here we propose an elastoplastic phase-field (PF) model to investigate the mechanics of tetragonal-to-monoclinic phase transformation (TMPT) and elastoplastic deformation of polycrystalline yttria-stabilized tetragonal zirconia (YSTZ). A Landau polynomial with non-vanishing chemical energy at the equilibrium temperature is introduced to account for the actual formation energies of the phases. The effects of different grain orientations, latent heat, and temperature on TMPT and deformation mechanisms are considered. The suppressive transformation effects of the grain boundaries (GBs) is modeled using an inhomogeneous kinetic coefficient in the bulk and GBs. The simulation results for single crystals demonstrate the capability of the model to reproduce the orientation-dependent compressive deformation of YSTZ similar to atomistic simulations and micropillar experiments. The single crystal with [100] crystallographic orientation along the loading direction (SC[100]) displays both TMPT and plasticity, SC[101] experiences only phase transformation, while SC[001] undergoes only plastic yielding. The TMPT induced by compressive loading exhibits shape memory effect (SME) below the equilibrium transformation temperature and pseudoelasticity above it, while the critical transformation stress increases with increasing loading temperature. The irrecoverable plastic strain is found to trap a part of the monoclinic phase, which prevents a complete reverse transformation. The polycrystalline cases also display SME and PE at low and high temperatures, respectively. Due to the orientation differences between grains and the stress concentrations at geometric nonlinearities, plastic deformation occurs in polycrystalline YSTZ for an applied load less than the yield stress. The results suggest a possible limitation of plasticity and an improvement of the shape recovery of YSTZ if one can control the orientation of the grains and/or increase the density of stacking faults at the GBs during material processing.

36 MATERIALS SCIENCE↗

Structural and phase transformation of apatite and quartz in the indentation process single crystals

Using the method of scanning and high-resolution electron microscopy, the zones of indentation by scratching for apatite and quartz single crystals were investigated. The textural, structural and phase transformations revealed have been conventionally ascribed to “deformation” and “diffusion” processes of plastic deformation. In zones of indentation by scratching of single crystals there have been two levels of structural transformations revealed, with a sharp boundary between them, at a stress equal to the theoretical ultimate stress limit (σ{sub TSL}). In the top zone of scratches, within the range of stress from the microhardness value H{sub s} up to the σ{sub TSL} value the substance undergoes profound structural and phase transformations. In the bed of scratches at the stress value lower than σ{sub TSL} values, single crystal fragmentation occurs with the formation of blocks and steps.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Path dependency of phase transformations

At high pressures titanium and zirconium are known to undergo a phase transformation from the hexagonal close packed (HCP), alpha-phase to the simple-hexagonal, omega-phase. Under conditions of shock loading, the high-pressure omega-phase can be retained upon release. It has been shown that temperature, peak shock stress, and texture can influence the transformation. Moreover, under these same loading conditions, plastic processes of slip and twinning are also affected by similar differences in the loading path. To understand this path dependency and it role on microstructural evolution, in-situ velocimetry measurements along with post-mortem metallographic and neutron diffraction characterization of soft recovered specimens have been utilized to qualitatively understand the kinetics of transformation, quantify volume fraction of retained omega-phase and characterize the shocked alpha and omega-phases. Together the work described here can be utilized to understand phase and structure for these metals and lend insight into the partitioning of plastic processes between phases far from equilibrium conditions. Experiments discussed here, reveal that the transformation from alpha to omega phase is more difficult in Ti than in Zr metals. This result is discussed in terms of both differences in shear modulus and free space within the lattice for these systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Texture evolution during nitinol martensite detwinning and phase transformation

Nitinol has been widely used to make medical devices for years due to its unique shape memory and superelastic properties. However, the texture of the nitinol wires has been largely ignored due to inherent complexity. In this study, in situ synchrotron X-ray diffraction has been carried out during uniaxial tensile testing to investigate the texture evolution of the nitinol wires during martensite detwinning, variant reorientation, and phase transformation. It was found that the thermal martensitic nitinol wire comprised primarily an axial (1{sup ¯}20), (120), and (102)-fiber texture. Detwinning initially converted the (120) and (102) fibers to the (1{sup ¯}20) fiber and progressed to a (1{sup ¯}30)-fiber texture by rigid body rotation. At strains above 10%, the (1{sup ¯}30)-fiber was shifted to the (110) fiber by (21{sup ¯}0) deformation twinning. The austenitic wire exhibited an axial (334)-fiber, which transformed to the near-(1{sup ¯}30) martensite texture after the stress-induced phase transformation.

36 MATERIALS SCIENCE↗

Phase transformations in steels: Processing, microstructure, and performance

In this study, contemporary steel research is revealing new processing avenues to tailor microstructure and properties that, until recently, were only imaginable. Much of the technological versatility facilitating this development is provided by the understanding and utilization of the complex phase transformation sequences available in ferrous alloys. Today we have the opportunity to explore the diverse phenomena displayed by steels with specialized analytical and experimental tools. Advances in multi-scale characterization techniques provide a fresh perspective into microstructural relationships at the macro- and micro-scale, enabling a fundamental understanding of the role of phase transformations during processing and subsequent deformation.

36 MATERIALS SCIENCE↗

Electrochemically-Induced Phase Transformations in Battery Storage Compounds (Final Technical Report)

Compounds of interest for ion storage in advanced batteries frequently exhibit phase transformations as the working ion concentration varies. Under large electrochemical driving forces inherent to practical use, systems are often driven far from equilibrium. This program combines experiments and theory to understand the phase transition behavior of ion insertion compounds when electrochemically driven far from equilibrium. As model systems, we focus on alkaline metal phosphates AMPO4 (A = alkali; M = first row transition metal) of olivine structure, which are both technologically interesting and ideally suited for fundamental study due to the ability to systematically tune transformation strain, and along with it, the phase transformation pathway. Behavior in compositions having large transformation strains (~15 vol%) requiring plasticity for strain accommodation is emphasized. Experimental techniques include operando characterization of structure while simultaneously varying electrokinetic parameters, and high resolution microscopy of nanoscale and interfacial phenomena. Phase-field modeling is used to model the thermodynamics and kinetics of competing transformation pathways, extended to include the effects of plasticity, and integrated with porous electrode kinetic theory to treat multi-particle effects. Success in this project will lead to an ability to design ion storage compounds with predictable transformation pathways, electrochemical kinetics, capacity utilization, and durability. New technologically important compounds may also be discovered.

36 MATERIALS SCIENCE↗

Deformation behavior and phase transformation of nanotwinned Al/Ti multilayers

We report nanotwinned Al/Ti multilayers have exhibited size-dependent microstructure evolution and high strength. However, their deformation mechanisms are less well understood. In this work, we investigated the deformation mechanisms of nanotwinned Al/Ti multilayers with FCC/HCP layer interfaces by using in situ micropillar compression tests. Nanotwinned Al/Ti multilayers exhibit compressive strength up to 2.4 GPa and good work hardening capability. Post-compression TEM analyses reveal high-density stacking faults and the HCP-to-FCC phase transformations in Ti. Molecular dynamics simulations elucidate the mechanisms of deformation induced phase transformation in Ti and the influence of collective movement of partial dislocations on the deformability of Al/Ti multilayers.

36 MATERIALS SCIENCE↗

Microstructures and phase transformations of Ti-30Zr-xNb (x = 5, 7, 9, 13 at.%) shape memory alloys

The microstructures, phase transformations and shape memory properties of Ti-30Zr-xNb (x = 5, 7, 9, 13 at.%) alloys were investigated. The X-ray diffraction and transmission electron microscopy observations showed that the Ti-30Zr-5Nb, Ti-30Zr-7/9Nb and Ti-30Zr-13Nb alloys were composed of the hcp α′-martensite, orthorhombic α″-martensite and β phases, respectively. The results indicated the enhanced β-stabilizing effect of Nb in Ti-30Zr-xNb alloys than that in Ti-Nb alloys due to the high content of Zr. The differential scanning calorimetry test indicated that the Ti-30Zr-5Nb alloy displayed a reversible transformation with a high martensitic transformation start temperature of 776 K and a reverse martensitic transformation start temperature (A{sub s}) of 790 K. For the Ti-30Zr-7Nb and Ti-30Zr-9Nb alloys, the martensitic transformation temperatures decreased with the increasing Nb content. Moreover, an ω phase transformation occurred in the both alloys upon heating at a temperature lower than the corresponding A{sub s}, which is prompted by more addition of Nb. Although the critical stress in tension of the three martensitic alloys decreased with increasing Nb content, the Ti-30Zr-9Nb alloy showed a critical stress of as high as 300 MPa. Among all the alloys, the Ti-30Zr-9Nb alloy exhibited the maximum shape memory effect of 1.61%, due to the lowest critical stress for the martensite reorientation. - Highlights: •Ti-30Zr-5Nb alloy is composed of hcp α′-martensite with the M{sub s} of 776 K. •Ti-30Zr-7Nb and Ti-30Zr-9Nb alloys are predominated by orthorhombic α″-martensite. •Ti-30Zr-13Nb alloy consists of a single β phase due to the β-stabilizing effect of Nb. •The martensitic transformation temperatures decrease with increasing Nb content. •Ti-30Zr-9Nb alloy shows the maximum shape memory effect of 1.61%.

36 MATERIALS SCIENCE↗

The effects of Ti content and quenching on phase transformations, microstructures, and mechanical properties in uranium-titanium alloys

In this work, the effect of Ti content on phase transformations, microstructures, and mechanical properties of U-Ti alloys are described for alloys containing 0.3 wt.% to 2.0 wt.%Ti. Rapid cooling is required to overcome diffusional decomposition of γ-phase and facilitate diffusionless transformation to supersaturated variants of α-phase. Critical cooling rate increases with increasing Ti content, opposite to the trend observed in U-Mo and U-Nb alloys. This difference occurs because the martensite transformation temperatures in these relatively dilute U-Ti alloys are above the knee of the C-curve for diffusional decomposition, unlike those in the more concentrated U-Mo and U-Nb alloys. In these U-Ti alloys critical cooling rate depends on the amount of undercooling required to reach M s , which increases with increasing Ti content, and the time for diffusional decomposition to occur just above M s , which decreases with increasing Ti content. The net result is that higher cooling rates are required as Ti content increases. Full quenching results in diffusionless transformation of γ-phase to supersaturated variants of α-phase. Very dilute alloys transform via a γ → β → α m sequence of massive transformations. Martensitic γ → α' a transformation begins at ~0.4%Ti, and 100% α' a microstructures are obtained from ~0.65% to ~1.4% Ti. A transition to banded α'b martensite occurs at ~1.5%Ti. Evidence suggests that the α' a to α' b transition may occur when the cubic γ-phase first transforms to tetragonal γ°, which in turn transforms to orthorhombic α' b via the sequence γ → γ° → α' b . Fully quenched alloys exhibit moderate strengths and ductilities, and their supersaturation with Ti makes them amenable to subsequent age hardening. Subcritical quenching typically results in two-phase microstructures with lower ductilities and near-zero Ti-supersaturation, eliminating the possibility of subsequent age hardening.

36 MATERIALS SCIENCE↗

Low-temperature solid-state phase transformations in 2H silicon carbide.

Study of the phase transformations taking place in 2H SiC single crystals at temperatures as low as 400 C. Some crystals transformed to a structure with one-dimensional disorder along the crystal c axis. Others transformed to a faulted cubic/6H structure. The transformation is time and temperature dependent, and is greatly enhanced by dislocations. The transformation takes place by means of a slip process perpendicular to the c axis. Cubic SiC crystals were observed to undergo a solid-state transformation above 1400 C.

Powell, J. A.↗

Defect-Mediated Phase Transformation in Anisotropic Two-Dimensional PdSe 2 Crystals for Seamless Electrical Contacts

The failure to achieve stable Ohmic contacts in two-dimensional material devices currently limits their promised performance and integration. Here we demonstrate that a phase transformation in a region of a layered semiconductor, PdSe 2 , can form a contiguous metallic Pd 17 Se 15 phase, leading to the formation of seamless Ohmic contacts for field-effect transistors. This phase transition is driven by defects created by exposure to an argon plasma. Cross-sectional scanning transmission electron microscopy is combined with theoretical calculations to elucidate how plasma-induced Se vacancies mediate the phase transformation. The resulting Pd 17 Se 15 phase is stable and shares the same native chemical bonds with the original PdSe2 phase, thereby forming an atomically sharp Pd 17 Se 15 /PdSe 2 interface. Furthermore, these Pd 17 Se 15 contacts exhibit a low contact resistance of ~0.75 kΩ μm and Schottky barrier height of ~3.3 meV, enabling nearly a 20-fold increase of carrier mobility in PdSe 2 transistors compared to that of traditional Ti/Au contacts. This finding opens new possibilities in the development of better electrical contacts for practical applications of 2D materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Derived crystal structure of martensitic materials by solid–solid phase transformation

A mathematical description of crystal structure is proposed consisting of two parts: the underlying translational periodicity and the distinct atomic positions up to the symmetry operations in the unit cell, consistent with the International Tables for Crystallography. By the Cauchy–Born hypothesis, such a description can be integrated with the theory of continuum mechanics to calculate a derived crystal structure produced by solid–solid phase transformation. In addition, the expressions for the orientation relationship between the parent lattice and the derived lattice are generalized. Additionally, the derived structure rationalizes the lattice parameters and the general equivalent atomic positions that assist the indexing process of X-ray diffraction analysis for low-symmetry martensitic materials undergoing phase transformation. The analysis is demonstrated in a CuAlMn shape memory alloy. From its austenite phase (L2 1 face-centered cubic structure), it is identified that the derived martensitic structure has orthorhombic symmetry Pmmn with the derived lattice parameters a d = 4.36491, b d = 5.40865 and c d = 4.2402 Å, by which the complicated X-ray Laue diffraction pattern can be well indexed, and the orientation relationship can be verified.

36 MATERIALS SCIENCE↗

Characterization of carbon ion implantation induced graded microstructure and phase transformation in stainless steel

Austenitic stainless steel 316L is ion implanted by carbon with implantation fluences of 1.2 × 10{sup 17} ions-cm{sup −} {sup 2}, 2.4 × 10{sup 17} ions-cm{sup −} {sup 2}, and 4.8 × 10{sup 17} ions-cm{sup −} {sup 2}. The ion implantation induced graded microstructure and phase transformation in stainless steel is investigated by X-ray diffraction, X-ray photoelectron spectroscopy and high resolution transmission electron microscopy. The corrosion resistance is evaluated by potentiodynamic test. It is found that the initial phase is austenite with a small amount of ferrite. After low fluence carbon ion implantation, an amorphous layer and ferrite phase enriched region underneath are formed. Nanophase particles precipitate from the amorphous layer due to energy minimization and irradiation at larger ion implantation fluence. The morphology of the precipitated nanophase particles changes from circular to dumbbell-like with increasing implantation fluence. The corrosion resistance of stainless steel is enhanced by the formation of amorphous layer and graphitic solid state carbon after carbon ion implantation. - Highlights: • Carbon implantation leads to phase transformation from austenite to ferrite. • The passive film on SS316L becomes thinner after carbon ion implantation. • An amorphous layer is formed by carbon ion implantation. • Nanophase precipitate from amorphous layer at higher ion implantation fluence. • Corrosion resistance of SS316L is improved by carbon implantation.

36 MATERIALS SCIENCE↗

Phase transformations in Cd–Ni nanostructured system at elevated temperatures

Using X-ray diffraction (both in vacuum and in air), derivatomass-spectrometry and thermo-programmed oxidation, phase transformations in nanostructured Cd–Ni system occurring while heating up 720 °C were described. These metal powders were obtained by joint reduction from aqueous solutions of salts with hydrazine. When study their composition, earlier unknown phases were detected (intermetallide CdNi{sub 3} and solid solution Cd{sub x}Ni{sub 1–x} with face centered cubic structure) and among the known intermetallides (Cd{sub 5}Ni and CdNi), only Cd{sub 5}Ni was found. As a consequence, phase transformations in the obtained nanostructured powders were remarkably different from those present on the Cd–Ni phase diagram. The intermediates and FCC phase decompose independently with formation of individual initial components (Cd and Ni) without intermediate product. At relatively high Cd concentration in the system, intermediate CdNi{sub 3} phase formation from Cd{sub 5}Ni and Cd{sub x}Ni{sub 1–x} phases, which are polar opposites in composition, is possible. The decomposition temperatures of Cd{sub 5}Ni and melting point of Cd in the nanostructured state were lower than those specified by the phase diagram by 170 and 70 °C, respectively, which well corresponded to the concept of effective (high) temperatures attributed to the nanostructured systems due to the energy saturation of the con stituent nanocrystallites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Controlling the Phase Transformation of Alumina for Enhanced Stability and Catalytic Properties

Current transition alumina catalysts require the presence of significant amounts of toxic, environmentally deleterious dopants for their stabilization. Herein, we report a simple and novel strategy to engineer transition aluminas to withstand aging temperatures up to 1200 °C without inducing the transformation to low-surface-area α-Al 2 O 3 and without requiring dopants. By judiciously optimizing the abundance of dominant facets and the interparticle distance, we can control the temperature of the phase transformation from θ-Al 2 O 3 to α-Al 2 O 3 and the specific surface sites on the latter. These specific surface sites provide favorable interactions with supported metal catalysts, leading to improved metal dispersion and greatly enhanced catalytic activity for hydrocarbon oxidation. Further, the results presented herein not only provide molecular-level insights into the critical factors causing deactivation and phase transformation of aluminas but also pave the way for the development of catalysts with improved activity for catalytic hydrocarbon oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase transformation dynamics guided alloy development for additive manufacturing

Fusion-based additive manufacturing technologies enable the fabrication of geometrically and compositionally complex parts unachievable by conventional manufacturing methods. However, the non-uniform and far-from-equilibrium heating/cooling conditions pose a significant challenge to consistently obtaining desirable phases in the as-printed parts. Here, in this study, we report a martensite stainless steel development guided by phase transformation dynamics revealed by in-situ high-speed, high-energy, high-resolution X-ray diffraction. This developed stainless steel consistently forms desired fully martensitic structure across a wide range of cooling rates (10 2 –10 7 °C/s), which enables direct printing of parts with fully martensitic structure. The as-printed material exhibits a yield strength of 1157 ± 23 MPa, comparable to its wrought counterpart after precipitation-hardening heat-treatment. The as-printed property is attributed to the fully martensitic structure and the fine precipitates formed during the intrinsic heat treatment in additive manufacturing. The phase transformation dynamics guided alloy development strategy demonstrated here opens the path for developing reliable, high-performance alloys specific for additive manufacturing.

17–4 PH stainless steel↗

Phase transformation between Cu(In,Sn){sub 2} and Cu{sub 2}(In,Sn) compounds formed on single crystalline Cu substrate during solid state aging

Interfacial reactions between eutectic SnIn and single crystalline Cu during solid-state aging at low temperature were investigated systematically. Three types of phase transformations between Cu(In,Sn){sub 2} layer and Cu{sub 2}(In,Sn) layer were observed, which are Cu(In,Sn){sub 2} grows and Cu{sub 2}(In,Sn) consumes at 40 °C, Cu(In,Sn){sub 2} and Cu{sub 2}(In,Sn) grow simultaneously at 60 °C, as well as Cu(In,Sn){sub 2} consumes and Cu{sub 2}(In,Sn) grows at 80 and 100 °C. According to physicochemical approach, the chemical reactions at Cu/Cu{sub 2}(In,Sn)/Cu(In,Sn){sub 2}/SnIn interfaces were discussed in detail. It was concluded that the diffusion ability of Cu and In atoms dominated different phase transformations. When diffusion constants k{sub 1In2} > 8/3k{sub 1Cu2} Cu(In,Sn){sub 2} will grow, and if k{sub 1Cu2} ≫ k{sub 1In2} Cu{sub 2}(In,Sn) will grow. Both Cu(In,Sn){sub 2} and Cu{sub 2}(In,Sn) can grow in the condition of k{sub 1In2} ≈ k{sub 1Cu2}. The values of k{sub 1Cu2} and k{sub 1In2} at different temperatures on (100)Cu and (111)Cu substrate were also calculated or estimated by analyzing the growth kinetics of the compound layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗