Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Influence of Ni on Martensitic Phase Transformations in NiTi Shape Memory Alloys

High-precision data on phase transformation temperatures in NiTi, including numerical expressions for the effect of Ni on M{sub S}, M{sub F}, A{sub S}, A{sub F} and T{sub 0}, are obtained, and the reasons for the large experimental scatter observed in previous studies are discussed. Clear experimental evidence is provided confirming the predictions of Tang et al. 1999 regarding deviations from a linear relation between the thermodynamic equilibrium temperature and Ni concentration. In addition to affecting the phase transition temperatures, increasing Ni contents are found to decrease the width of thermal hysteresis and the heat of transformation. These findings are rationalized on the basis of the crystallographic data of Prokoshkin et al. 2004 and the theory of Ball and James. The results show that it is important to document carefully the details of the arc-melting procedure used to make shape memory alloys and that, if the effects of processing are properly accounted for, precise values for the Ni concentration of the NiTi matrix can be obtained.

36 MATERIALS SCIENCE↗

Phase Transformation Kinetics and Alloy Microsegregation in High Pressure Die Cast Magnesium Alloys (Final Report)

The primary objective of this project is to conduct a systematic, quantitative study of phase transformation kinetics and microsegregation in HPDC Mg alloys in both as-cast and heat treated conditions. These results will be used to develop and validate physics-based phase transformation kinetics micro-models that quantitatively capture microstructural evolution and microsegregation during HPDC and heat treatment of Mg alloys. Finally, this knowledge will be transferred to industry and the wider research community through these micro-models and the experimental data that will be stored in the National Institute of Standards and Technology (NIST)-DOE Energy Efficiency and Renewable Energy Advanced Automotive Cast Magnesium Alloys Repository, as well as a new repository, the University of Michigan Department of Energy Predictive Integrated Structural Materials Science (UM DOE PRISMS) Materials Commons. To accomplish these goals, a systematic and comprehensive experimental study is being combined with computational modeling and simulation.

36 MATERIALS SCIENCE↗

Study of phase transformation and crystal structure for 1D carbon-modified titania ribbons

One-dimensional hydrogen titanate ribbons were successfully prepared with hydrothermal reaction in a highly basic solution. A series of one-dimensional carbon-modified TiO{sub 2} ribbons were prepared via calcination of the mixture of hydrogen titanate ribbons and sucrose solution under N{sub 2} flow at different temperatures. The phase transformation process of hydrogen titanate ribbons was investigated by in-situ X-ray diffraction at various temperatures. Besides, one-dimensional carbon-modified TiO{sub 2} ribbons calcined at different temperatures were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, nitrogen adsorption isotherms, diffuse reflectance ultraviolet–visible spectroscopy, and so on. Carbon-modified TiO{sub 2} ribbons showed one-dimensional ribbon crystal structure and various crystal phases of TiO{sub 2}. After being modified with carbon, a layer of uniform carbon film was coated on the surface of TiO{sub 2} ribbons, which improved their adsorption capacity for methyl orange as a model organic pollutant. One-dimensional carbon-modified TiO{sub 2} ribbons also exhibited enhanced visible-light absorbance with the increase of calcination temperatures. - Highlights: • The synthesis of 1D carbon-modified TiO{sub 2} ribbons. • The phase transformation of 1D carbon-modified TiO{sub 2} ribbons. • 1D carbon-modified TiO{sub 2} exhibites enhanced visible-light absorbance.

36 MATERIALS SCIENCE↗

Phase transformations induced by high electronic excitation in ion-irradiated Gd{sub 2}(Zr{sub x}Ti{sub 1-x}){sub 2}O{sub 7} pyrochlores

The pyrochlore oxides (A{sub 2}B{sub 2}O{sub 7}) exhibit a remarkable range of structural, physical, and magnetic properties related to their various chemical compositions. This article reports the phase transformations induced by high electronic excitation in pyrochlores of the Gd{sub 2}(Zr{sub x}Ti{sub 1-x}){sub 2}O{sub 7} family irradiated with swift ions. The structural changes, investigated by using several analytical techniques (x-ray diffraction, Raman spectroscopy, and transmission electron microscopy), strongly depend on the chemical composition. The high electronic excitation along the ion trajectory results in the amorphization of ion tracks for Gd{sub 2}Ti{sub 2}O{sub 7} and Gd{sub 2}TiZrO{sub 7}, whereas a defective fluorite structure is formed in Gd{sub 2}Zr{sub 2}O{sub 7}. Moreover, the results underline the existence of an electronic stopping power threshold of 6 keV/nm for amorphizable compounds and 10 keV/nm for Gd{sub 2}Zr{sub 2}O{sub 7}, below which phase transformations do not occur. Finally, the study of the thermal recovery of irradiated pyrochlores provides the recrystallization temperature for amorphized samples and reveals differences in the recovery process which are related to the chemical composition.

36 MATERIALS SCIENCE↗

Phase transformation and wear studies of plasma sprayed yttria stabilized zirconia coatings containing various mol% of yttria

Plasma sprayable grade zirconia powders doped with various mol% of yttria (0, 2, 3, 4, 6, 8 and 12 mol%) were synthesized by a chemical co-precipitation route. The coprecipitation conditions were adjusted such that the powders possessed good flowability in the as calcined condition and thus avoiding the agglomeration step like spray drying. Identical plasma spray parameters were used for plasma spraying all the powders on stainless steel plates. The powders and plasma sprayed coatings were characterized by X-ray diffractometry, Scanning Electron Microscopy and Raman spectroscopy. Zirconia powders are susceptible to phase transformations when subjected to very high temperatures during plasma spraying and XRD is insensitive to the presence of some non crystalline phases and hence Raman spectroscopy was used as an important tool. The microstructure of the plasma sprayed coatings showed a bimodal distribution containing fully melted and unmelted zones. The microhardness and wear resistance of the plasma sprayed coatings were determined. Among the plasma sprayed coatings, 3 mol% yttria stabilized zirconia coating containing pure tetragonal zirconia showed the highest wear resistance. - Research Highlights: {yields} Preparation plasma sprayable YSZ powders without any agglomeration process and plasma spraying {yields} Phase transformation studies of plasma sprayed YSZ coatings by XRD and Raman spectroscopy {yields} Microstructure of the plasma sprayed coatings exhibited bimodal distribution {yields} Plasma sprayed 3 mol% YSZ coating exhibited the highest wear resistance {yields} Higher wear resistance is due to the higher fracture toughness of tetragonal 3 mol% YSZ phase.

36 MATERIALS SCIENCE↗

In-situ Monitoring of Dynamic Phenomena during Solidification and Phase Transformation Processing

The purpose of this project is to: (1) Directly observe phase transformations and microstructure evolution using proton (and synchrotron x-ray) radiography and tomography; (2) Constrain phase-field models for microstructure evolution; (3) Experimentally control microstructure evolution during processing to enable co-design; and (4) Advance toward the MaRIE vision. Understand microstructure evolution and chemical segregation during solidification {yields} solid-state transformations in Pu-Ga.

36 MATERIALS SCIENCE↗

High-surface-area corundum nanoparticles by resistive hotspot-induced phase transformation

Abstract High-surface-area α-Al 2 O 3 nanoparticles are used in high-strength ceramics and stable catalyst supports. The production of α-Al 2 O 3 by phase transformation from γ-Al 2 O 3 is hampered by a high activation energy barrier, which usually requires extended high-temperature annealing (~1500 K, > 10 h) and suffers from aggregation. Here, we report the synthesis of dehydrated α-Al 2 O 3 nanoparticles (phase purity ~100%, particle size ~23 nm, surface area ~65 m 2 g −1 ) by a pulsed direct current Joule heating of γ-Al 2 O 3 . The phase transformation is completed at a reduced bulk temperature and duration (~573 K, < 1 s) via an intermediate δʹ-Al 2 O 3 phase. Numerical simulations reveal the resistive hotspot-induced local heating in the pulsed current process enables the rapid transformation. Theoretical calculations show the topotactic transition (from γ- to δʹ- to α-Al 2 O 3 ) is driven by their surface energy differences. The α-Al 2 O 3 nanoparticles are sintered to nanograined ceramics with hardness superior to commercial alumina and approaching that of sapphire.

Deng, Bing (ORCID:0000000305308410)↗

Residual Stress Modeling with Phase Transformation for Wire Arc Additive Manufacturing of B91 Steel

Wire arc additive manufacturing (WAAM) is an energy-efficient manufacturing technique used for near-net-shape production of functional industrial components. However, heat accumulation during deposition and the associated mechanical and metallurgical changes result in complex residual stress profiles across the cross section of the fabricated components. These residual stresses are detrimental to the service life of the components. In this study, sequentially coupled thermomechanical analysis of WAAM B91 steel is conducted to quantify the residual stress variation across the component. The thermomechanical analysis includes a transient heat transfer model and a static stress model that incorporates the transformation-induced plasticity due to martensitic phase transformation. Here, the experimentally calibrated heat transfer model mirrors the temperature variation of the system during the deposition. The results from the stress model are validated via x-ray diffraction measurements, and the numerical results are in good agreement with the experimental data.

20 FOSSIL-FUELED POWER PLANTS↗

Heterogeneous phase transformation pathways in additively manufactured Al-Ce-Mn alloys

Heat treatment of additively manufactured Al-Ce based multicomponent alloys leads to complex microstructure evolution. In this research, the ability to extend the phase transformation theories involving nucleation of a product phase from a heterogeneous multi-phase microstructure typical to that of additively manufactured samples is explored. The Al-10Ce-8Mn (wt%) was used as a model alloy system. Under additive manufacturing conditions different solidification microstructures were obtained due to spatial and temporal variations of thermal gradients (G) and liquid-solid interface velocities (R) within a given melt pool. Near the melt pool boundary (high G and low R, referred as MPB region), initially, Al 20 Mn 2 Ce forms from the liquid followed by a eutectic of FCC Al and Al 11 Ce 3 . In the melt pool interiors (low G and high R referred as ES region) a eutectic structure between FCC Al and Al 20 Mn 2 Ce is observed. During subsequent heat treatments, the MPB and ES regions transform into different sets of microstructures. In the MPB region, a fine globular microstructure containing FCC Al, Al 11 Ce 3 , Al 6 Mn, and Al 12 Mn results from the decomposition of Al 20 Mn 2 Ce. In the ES region a faceted Al 51 Mn 7 Ce 4 plate phase results from the decomposition of Al 20 Mn 2 Ce. The formation of the Al 51 Mn 7 Ce 4 phase within the eutectic microstructure at the boundaries of FCC Al and Al 20 Mn 2 Ce has not been reported in the literature. Further, these two distinct phase transformation pathways are rationalized based on the role of driving force on the nucleation of (Al 6 Mn) and/or metastable intermetallic (Al 51 Mn 7 Ce 4 ) phases at the interface of aluminum (FCC) and the non-equilibrium intermetallic (Al 20 Mn 2 Ce) phases.

36 MATERIALS SCIENCE↗

Phase Transformation Mechanism of Li-Ion Storage in Iron(III) Hydroxide Phosphates

Many ion storage compounds used for electrodes in Li-ion batteries undergo a first order phase transformation between the Li-rich and Li-poor end-members during battery charge and discharge. This often entails large transformation strains due to lattice misfits, which may hamper charge and discharge kinetics. Iron(III) hydroxide phosphate, Fe 2–y (PO 4 )(OH) 3–3y (H 2 O) 3y–2 is a promising new cathode material with high Li-ion storage capacity, low production costs and low toxicity. Previous reports on this material indicate that the Li-ion intercalation and extraction in this material is accompanied by a second-order solid solution transformation. However, direct information about the transformation mechanism in Fe 2–y (PO 4 )(OH) 3–3y (H 2 O) 3y–2 is lacking, and several details remain unclear. In this work, Fe 2–y (PO 4 )(OH) 3–3y (H 2 O) 3y–2 is prepared by hydrothermal synthesis and characterized structurally, morphologically and by electrochemical analysis (galvostatic cycling and cyclic voltammetry). A wide range of synthesis conditions is screened, which provides information about their correlation with chemical composition, crystallite size, particle morphology and electrochemical performance. The phase transformation mechanism of selected materials is investigated through synchrotron radiation powder X-ray diffraction collected during galvanostatic discharge–charge cycling. Furthermore, this confirms a complete solid solution transformation both during Li-insertion (discharge) and -extraction (charge), but also reveals a highly anisotropic evolution in lattice dimensions, which is linked to an irreversible reaction step and the high vacancy concentration in Fe 2–y (PO 4 )(OH) 3–3y (H 2 O) 3y–2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

External-Field-Induced Phase Transformation and Associated Properties in a Ni 50 Mn 34 Fe 3 In 13 Metamagnetic Shape Memory Wire

Metamagnetic shape memory alloys exhibit a series of intriguing multifunctional properties and have great potential for applications in magnetic actuation, sensing and magnetic refrigeration. However, the poor mechanical properties of these alloys with hardly any tensile deformability seriously limit their practical application. In the present work, we developed a Ni-Fe-Mn-In microwire that exhibits both a giant, tensile superelasticity and a magnetic-field-induced first-order phase transformation. The recoverable strain of superelasticity is more than 20% in the temperature range of 233–283 K, which is the highest recoverable strain reported heretofore in Ni-Mn-based shape memory alloys (SMAs). Moreover, the present microwire exhibits a large shape memory effect with a recoverable strain of up to 13.9% under the constant tensile stress of 225 MPa. As a result of the magnetic-field-induced first-order phase transformation, a large reversible magnetocaloric effect with an isothermal entropy change ΔS m of 15.1 J kg –1 K –1 for a field change from 0.2 T to 5 T was achieved in this microwire. The realization of both magnetic-field and tensile-stress-induced transformations confers on this microwire great potential for application in miniature multi-functional devices and provides an opportunity for multi-functional property optimization under coupled multiple fields.

36 MATERIALS SCIENCE↗

Ion irradiation induced phase transformation in gold nanocrystalline films

Gold is a noble metal typically stable as a solid in a face-centered cubic (FCC) structure under ambient conditions; however, under particular circumstances aberrant allotropes have been synthesized. In this work, we document the phase transformation of 25 nm thick nanocrystalline (NC) free-standing gold thin-film via in situ ion irradiation studied using atomic-resolution transmission electron microscopy (TEM). Utilizing precession electron diffraction (PED) techniques, crystallographic orientation and the radiation-induced relative strains were measured and furthermore used to determine that a combination of surface and radiation-induced strains lead to an FCC to hexagonal close packed (HCP) crystallographic phase transformation upon a 10 dpa radiation dose of Au 4+ ions. Contrary to previous studies, HCP phase in nanostructures of gold was stabilized and did not transform back to FCC due to a combination of size effects and defects imparted by damage cascades.

36 MATERIALS SCIENCE↗

Effects of Si on microstructure and phase transformation at elevated temperatures in ferritic white cast irons

The effects of Si on microstructure and phase transformation at elevated temperature of ferritic 31wt.%Cr-1.1wt.%C white cast irons with up to 3wt.%Si have been studied. Applications of these irons include parts requiring heat resistance at elevated temperature. The irons were produced by sand casting. The microstructure in as-cast condition and after being subjected to high temperature (700 to 1000 °C) was investigated by light microscopy, X-ray diffraction, and electron microscopy. The results revealed that the as-cast microstructure consisted mainly of primary ferrite dendrites and eutectic (ferrite + M{sub 7}C{sub 3}). Si promotes M{sub 7}C{sub 3}-to-M{sub 23}C{sub 6} transformation in the irons subjected to transformation at elevated temperature, but no sigma phase was found. The extent of M{sub 7}C{sub 3}-to-M{sub 23}C{sub 6} transformation increases proportional to the increasing transformation temperature, holding time and Si content in the irons. For the iron with 1.0wt.%Si content after holding at elevated temperatures, martensite was also found, which could be attributed to carbon accretion effects in eutectic ferrite. Si was incorporated in M{sub 23}C{sub 6} such that M{sub 23}C{sub 6} containing Si can show darker contrast under SEM-BEI as compared to M{sub 7}C{sub 3}; this is the opposite to what has been observed for the cases of typical M{sub 23}C{sub 6} and M{sub 23}C{sub 6} containing Mo or W. The results obtained are important to understand the change in properties of ferritic, high chromium irons containing Si subjected to elevated temperature.

36 MATERIALS SCIENCE↗

SISGR -- Domain Microstructures and Mechanisms for Large, Reversible and Anhysteretic Strain Behaviors in Phase Transforming Ferroelectric Materials

This four-year project (including one-year no-cost extension) aimed to advance fundamental understanding of field-induced strain behaviors of phase transforming ferroelectrics. We performed meso-scale phase field modeling and computer simulation to study domain evolutions, mechanisms and engineering techniques, and developed computational techniques for nanodomain diffraction analysis; to further support above originally planned tasks, we also carried out preliminary first-principles density functional theory calculations of point defects and domain walls to complement meso-scale computations as well as performed in-situ high-energy synchrotron X-ray single crystal diffraction experiments to guide theoretical development (both without extra cost to the project thanks to XSEDE supercomputers and DOE user facility Advanced Photon Source).

36 MATERIALS SCIENCE↗

Effect of structural phase transformation in FeGaO{sub 3} on its magnetic and ferroelectric properties

We investigate the structural phase transformation from orthorhombic to rhombohedral structure in FeGaO{sub 3} by adopting a combined effect of mechanical alloying/milling and solid state sintering techniques. The structural phase formation of the FeGaO{sub 3} compound has been characterized by X-ray diffraction pattern. Mechanical milling played a significant role on the stabilization of rhombohedral phase in FeGaO{sub 3}, where as high temperature sintering stabilized the system in orthorhombic phase. A considerable difference has been observed in magnetic and ferroelectric properties of the system in two phases. The system in rhombohedral (R-3c) phase exhibited better ferromagnetic and of ferroelectric properties at room temperature in comparison to orthorhombic (Pc2{sub 1}n) phase. The rhombohedral phase appears to be good for developing metal doped hematite system for spintronics applications and in that process mechanical milling played an important role.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Small-angle neutron scattering study of magnetic ordering and inhomogeneity across the martensitic phase transformation in Ni 50–x Co x Mn₄₀Sn₁₀ alloys

The Heusler-derived multiferroic alloy Ni 50–x Co x Mn₄₀Sn₁₀ has recently been shown to exhibit, at just above room temperature, a highly reversible martensitic phase transformation with an unusually large magnetization change. In this work the nature of the magnetic ordering above and below this transformation has been studied in detail in the critical composition range x = 6–8 via temperature-dependent (5–600 K) magnetometry and small-angle neutron scattering (SANS). We observe fairly typical paramagnetic to long-range-ordered ferromagnetic phase transitions on cooling to 420–430 K, with the expected critical spin fluctuations, followed by first-order martensitic phase transformations to a nonferromagnetic state below 360–390 K. The static magnetization reveals complex magnetism in this low-temperature nonferromagnetic phase, including a Langevin-like field dependence, distinct spin freezing near 60 K, and significant exchange bias effects, consistent with superparamagnetic blocking of ferromagnetic clusters of nanoscopic dimensions. We demonstrate that these spin clusters, whose existence has been hypothesized in a variety of martensitic alloys exhibiting competition between ferromagnetic and antiferromagnetic exchange interactions, can be directly observed by SANS. The scattering data are consistent with a liquidlike spatial distribution of interacting magnetic clusters with a mean center-to-center spacing of 12 nm. Considering the behavior of the superparmagnetism, cooling-field and temperature-dependent exchange bias, and magnetic SANS, we discuss in detail the physical form and origin of these spin clusters, their intercluster interactions, the nature of the ground-state magnetic ordering in the martensitic phase, and the implications for our understanding of such alloy systems.

Bhatti, Kanwal Preet↗

Study of the magnetic properties, structure, and phase transformation in the alloys of the Co-Al-W system

An experimental study of phase transformations in the system of Co-Al-W in the concentration area of the intermetallic compound Co{sub 3}(Al, W) is presented. The structure and phase composition of the Co–9 at % Al–X at % W (X = 4.5, 6.8, 8.5, 10, 12.5) alloys in depending on the tungsten content are analyzed. The Curie temperature and magnetic properties of the alloys with the different phase composition are determined.

36 MATERIALS SCIENCE↗