Search NASA⌕ Search

SEARCH · Search NASA

Results for “planetary data systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Research Opportunities Supporting the Vision for Space Exploration from the Transformation of the Former Microgravity Materials Science Program

The Microgravity Materials Science Program established a strong research capability through partnerships between NASA and the scientific research community. With the announcement of the vision for space exploration, additional emphasis in strategic materials science areas was necessary. The President's Commission recognized that achieving its exploration objectives would require significant technical innovation, research, and development in focal areas defined as "enabling technologies." Among the 17 enabling technologies identified for initial focus were: advanced structures, advanced power and propulsion; closed-loop life support and habitability; extravehicular activity systems; autonomous systems and robotics; scientific data collection and analysis, biomedical risk mitigation; and planetary in situ resource utilization. Mission success may depend upon use of local resources to fabricate a replacement part to repair a critical system. Future propulsion systems will require materials with a wide range of mechanical, thermophysical, and thermochemical properties, many of them well beyond capabilities of today's materials systems. Materials challenges have also been identified by experts working to develop advanced life support systems. In responding to the vision for space exploration, the Microgravity Materials Science Program aggressively transformed its research portfolio and focused materials science areas of emphasis to include space radiation shielding; in situ fabrication and repair for life support systems; in situ resource utilization for life support consumables; and advanced materials for exploration, including materials science for space propulsion systems and for life support systems. The purpose of this paper is to inform the scientific community of these new research directions and opportunities to utilize their materials science expertise and capabilities to support the vision for space exploration.

Clinton, R. G., Jr.↗
NASA NTRS2001

Solar-System Tests of Gravitational Theories

We are engaged in testing gravitational theory, primarily using observations of objects in the solar system and primarily on that scale. Our goal is either to detect departures from the standard model (general relativity) - if any exist within the level of sensitivity of our data - or to place tighter bounds on such departures. For this project, we have analyzed a combination of observational data with our model of the solar system, including mostly planetary radar ranging, lunar laser ranging, and spacecraft tracking, but also including both pulsar timing and pulsar very long base interferometry (VLBI) measurements. This year, we have extended our model of Earth nutation with adjustable correction terms at the principal frequencies. We also refined our model of tidal drag on the Moon's orbit. We believe these changes will make no substantial changes in the results, but we are now repeating the analysis of the whole set of data to verify that belief. Additional information is contained in the original extended abstract.

Shapiro, Irwin I.↗
NASA NTRS1995

A Systems Engineering Approach to the Analysis of a Planetary Mission Ground System in Terms of Science Objectives

The most fundamental objective of all planetary missions is to return data. To accomplish this, a spacecraft is fabricated and built, software is planned and coded, and a ground system is designed and implemented. However, a systems engineering approach to determine how the collection of data drives ground system capabilities has received little attention.This paper defines a technique by which science objectives can be quantitatively evaluated. For illustrative purposes, it will be applied to NASA's Cassini Mission. This mission, to be launched in 1997, is an international endeavor designed to orbit Saturn for four years.The results of this systems engineering approach will show which science objectives drive specific ground system capabilities. In addition, this technique can assist system engineers in the selection of the science payload during pre-project mission planning; ground system designers during ground system development and implementation; and operations personnel during the mission.

systems engineering, ground systems↗
NASA NTRS1985

Viking Radio Science Data Analysis and Synthesis

The objectives of the analysis of the Viking radio tracking data are: (1) the study of Mars, its rotation, topography, and internal structure; (2) the development of a general dynamical model of the solar system; and (3) tests of the fundamental laws of gravitation. The central element in the data analysis is the Planetary Ephemeris Program (PEP) which embodies the mathematical models of the solar system. The asteroid model in PEP is changed to better estimate the mass of a fictitious uniform ring and the masses of eight separate asteroids. A model of the rotation of Mars include a secular rate of change of the period and both annual and semiannual variations in the phase of rotation. Other modifications to this model are discussed.

Shapiro, I. I.↗
NASA NTRS1991

Video Image Communication And Retrieval - Updated

Video Image Communication and Retrieval (VICAR) package of computer programs is general-purpose image-processing software system. Intended for processing data from Jet Propulsion Laboratory's unmanned planetary spacecraft, now used in variety of other applications, including processing of biomedical images, cartography, studies of Earth resources, and geological exploration. Development of newest version of VICAR emphasizes standardized, easily-understood user interface, shield between user and host operating system, and comprehensive array of image-processing capabilities.

Wall, Ray J.↗
NASA NTRS1974

Geodetic and dynamical properties of planets

Data concerning planetary dynamics and geodesy are severely limited because, at present, only one planetary system in the universe can be studied. It is, therefore, impossible to base the study of planets on a significant statistical sample. The gravity fields of the planets are discussed, giving attention to the various space missions involved in the collection of the relevant data. Other subjects considered include planetary shape and topography, planetary rotations, and planetary interiors. The basic problem in finding an acceptable model for the planetary interior is to specify the chemical composition with depth and then to find a physically realistic equation for the material.

Anderson, J. D.↗
NASA NTRS2017

Open-Loop Flight Testing of COBALT GN&C Technologies for Precise Soft Landing

A terrestrial, open-loop (OL) flight test campaign of the NASA COBALT (CoOperative Blending of Autonomous Landing Technologies) platform was conducted onboard the Masten Xodiac suborbital rocket testbed, with support through the NASA Advanced Exploration Systems (AES), Game Changing Development (GCD), and Flight Opportunities (FO) Programs. The COBALT platform integrates NASA Guidance, Navigation and Control (GN&C) sensing technologies for autonomous, precise soft landing, including the Navigation Doppler Lidar (NDL) velocity and range sensor and the Lander Vision System (LVS) Terrain Relative Navigation (TRN) system. A specialized navigation filter running onboard COBALT fuzes the NDL and LVS data in real time to produce a precise navigation solution that is independent of the Global Positioning System (GPS) and suitable for future, autonomous planetary landing systems. The OL campaign tested COBALT as a passive payload, with COBALT data collection and filter execution, but with the Xodiac vehicle Guidance and Control (G&C) loops closed on a Masten GPS-based navigation solution. The OL test was performed as a risk reduction activity in preparation for an upcoming 2017 closed-loop (CL) flight campaign in which Xodiac G&C will act on the COBALT navigation solution and the GPS-based navigation will serve only as a backup monitor.

Carson, John M., III↗
NASA NTRSDate not supplied

3D Material Response of the MSL Heatshield Using NuSil-Coated PICA

The Mars Science Laboratory (MSL) was protected during its atmospheric entry by an instrumented heatshield that used NASA's Phenolic Impregnated Carbon Ablator (PICA) material [1]. PICA is a lightweight carbon fiber/polymeric resin material that offers outstanding performance for protecting probes during planetary entry. Data from the Mars Entry Descent and Landing Instrument (MEDLI) suite on MSL offers unique in-flight validation data for models of material response and atmospheric entry. MEDLI recorded, among other things, time-resolved in-depth temperature data of PICA using thermocouple sensors assembled in the MEDLI Integrated Sensor Plugs (MISP) [2]. A space-grade silicone-based coating commercially known as NuSil CV-1144-0 [3] was applied to the entire MSL heatshield, including the MEDLI plugs, to mitigate the spread of dust from PICA. Modeling the thermal response of PICA-NuSil (PICA-N) system is still an open challenge. Ground testing of PICA-N models exhibited surface temperature jumps of the order of 150 K due to oxide scale formation and sub-sequent NuSil burn-off. It is therefore critical to include a validated model for the material response of the coating in engineering codes. A test campaign has been conducted at the NASA’s Langley HyMETS [4] facility to screen the response of PICA-N and gather detailed data on its behavior [5]. A first model of PICA-N thermal response has been developed using the Hy-METS experiments [6]. The objective of this work is to analyze the material response of the latest PICA-N model compared to the engineering model used to simulate the entry of MSL. The environment and material response around the MSL aeroshell during Mars atmospheric entry is simulated using a collection of tools. The Direct Simulation Monte Carlo SPARTA code [7] is used in the rarefied regime, the Data Parallel Line Relaxation (DPLR) code [8] is used in the continuum regime and radiative heating conditions are provided by the Nonequilibrium air radiation (NEQAIR) code [9] to estimate the environmental conditions. The thermal response inside the material is computed using the Porous material Analysis Toolbox based on Open-FOAM (PATO) [10,11,12]. Thermodynamic and chemistry properties are estimated using the Mutation++ library [13]. The approach implemented in PATO as a first cut PICA-N thermal response model is outlined in Figure 1. While the recession is less than the coating thickness, the Surface mass and energy balance Boundary Condition (SBC) uses the NuSil B’ tables. Once the recession removes the coating, the usual PICA B’ tables are used for the SBC. The B’ tables are computed using an equilibrium solver implemented in Mutation++, given the temperature, pressure, blowing rate, composition of the pyrolysis and environment gases, and the condensed species at the surface. Preliminary results of the 3D material response of the MSL heat-shield at the peak heating (80 sec after Entry Interface) are shown in Figure 2. Current NASA’s mission to Mars, Mars 2020, used the spare heatshield of MSL for thermal protection during entry, descent, and landing. In preparation for Mars 2020 post-flight analysis, the PATO high-fidelity material response capability was benchmarked against flight data from MEDLI. This effort represents an important milestone toward the development of validated predictive capabilities for designing thermal protection systems for planetary probes. This bench-marking is awaiting the final release of the MEDLI-2 data.

Aerospace↗
NASA NTRS1996

Trans-Global Mission Architectures

Mission operations include the utilization of both space and ground resources to achieve mission objectives. Future architectures will make the spacecraft a node on a distributed system, thus expanding the scope of missions beyond the global scale. The history and evolution of planetary mission operations are outlined, together with the current global involvement in planetary missions. The modular nature and reuse of the supporting ground data systems, and the inclusion of automation and dedicated software in space missions, are discussed. A trans-global mission architecture is presented, and consists of an extension of a layered reusable mission operations architecture to create an open ground/space operations system. Concurrent mission engineering with such trans-global structures is discussed.

Anderson, Barbara V.↗
NASA NTRS1993

The development of the human exploration demonstration project (HEDP), a planetary systems testbed

The Human Exploration Demonstration Project (HEDP) is an ongoing task at the National Aeronautics and Space Administration's Ames Research Center to address the advanced technology requirements necessary to implement an integrated working and living environment for a planetary surface habitat. The integrated environment will consist of life support systems, physiological monitoring of project crew, a virtual environment workstation, and centralized data acquisition and habitat systems health monitoring. There will be several robotic systems on a simulated planetary landscape external to the habitat environment to provide representative work loads for the crew. This paper describes the status of the HEDP after one year, the major facilities composing the HEDP, the project's role as an Ames Research Center testbed, and the types of demonstration scenarios that will be run to showcase the technologies.

Chevers, Edward S.↗
NASA NTRS1988

Goldstone solar system radar

Planning, direction, experimental design, and coordination of data-acquisition and engineering activities in support of all Goldstone planetary radar astronomy were performed. This work demands familiarity with the various components of a planetary radar telescope (transmitter, receiver, antenna, computer hardware and software) as well as knowledge of how the entire system must function as a cohesive unit to meet the particular scientific objectives at hand in a given observation. Support radar data-processing facilities, currently being used for virtually all Goldstone data reduction includes: a VAX 11/780 computer system, an FPS 5210 array processor, terminals, tape drives, and image-display devices, as well as a large body of data-reduction software to accommodate the variety of data-acquisition formats and strategems. Successful 113-cm radar observation of Callisto and the near-Earth asteroid 1981 Midas and Goldstone/VLA radar observations of Saturn's rings were obtained. Quick-look verification programs from data taken with phase-coded cw (i.e., ranging) waveforms, applicable to Venus, the Moon, and small bodies were completed. Definition of scientific and engineering requirements on instrument performance, radar system configuration, and personnel, for all 1988 Goldstone radar investigations was accomplished.

Jurgens, Raymond F.↗
NASA NTRS2002

Detection by Transit Photometry

A periodic sequence of planetary transits provides a valid detection of an orbiting planet and provides the relative size of the planet and its orbital period. Ancillary measurements of the stellar spectrum and the variations of the star's radial velocity or position combined with stellar models allow the absolute size of the planet and its mass to be obtained. The results of this approach have already shown that the planet orbiting HD209458 has only 70% of the mass of Jupiter, but is nearly 50% larger in radius. Based on models of planetary structure, these results imply that the planet must have spent most of its lifetime so close to the star that it has not been able to cool and contract as have the giant planets in our Solar System. Thus its density is much less than Jupiter and Saturn and is actually less than that of water; i.e., about 0.4 gr/cu cm. If more sensitive measurements of the light curve of stars with closely orbiting planets can be made that provide the varying amplitude of the light reflected by the planet at various phases in its orbit, then characteristics of the planetary atmosphere can be obtained. Potentially, these data can identify major molecular species present in the atmosphere and tell us if clouds are present and yield the phase function of the aerosols. Although such detail cannot be obtained for Earth-size planets because their signal amplitudes are too small, it is possible to get data critical to the determination of the structure of extrasolar planetary systems. In particular, the size distributions and their orbital distributions can be measured by the transit photometry missions now in development. The COROT mission should be able to find large terrestrial planets in short-period orbits while the more ambitious Kepler and Eddington missions should be able to detect planets even smaller than the Earth and at orbital distances that place them in the habitable zone of their stars.

Borucki, William J.↗
NASA NTRS1992

A new approach for data acquisition at the JPL space simulators

In 1990, a personal computer based data acquisition system was put into service for the Space Simulators and Environmental Test Laboratory at the Jet Propulsion Laboratory (JPL) in Pasadena, California. The new system replaced an outdated minicomputer system which had been in use since 1980. This new data acquisition system was designed and built by JPL for the specific task of acquiring thermal test data in support of space simulation and thermal vacuum testing at JPL. The data acquisition system was designed using powerful personal computers and local-area-network (LAN) technology. Reliability, expandability, and maintainability were some of the most important criteria in the design of the data system and in the selection of hardware and software components. The data acquisition system is used to record both test chamber operational data and thermal data from the unit under test. Tests are conducted in numerous small thermal vacuum chambers and in the large solar simulator and range in size from individual components using only 2 or 3 thermocouples to entire planetary spacecraft requiring in excess of 1200 channels of test data. The system supports several of these tests running concurrently. The previous data system is described along with reasons for its replacement, the types of data acquired, the new data system, and the benefits obtained from the new system including information on tests performed to date.

Fisher, Terry C.↗
NASA NTRS1979

Science aspects of a mission beyond the planets

A mission out of the planetary system, launched about the year 2000, could provide valuable data concerning characteristics of the heliopause, the interstellar medium, stellar distances (by parallax measurements), low-energy cosmic rays, interplanetary gas distribution, and mass of the solar system. Secondary objectives include investigation of Pluto. Candidate science measurements, instruments, and instrument development needs are discussed. The mission should extend from 400 to 1000 AU from the sun. A heliocentric hyperbolic escape velocity of 50-100 km/sec or more is needed to attain this distance within a reasonable mission duration (20-50 years). The trajectory should be toward the incoming interstellar gas. For a year 2000 launch, a Pluto encounter and orbiter can be included. A second mission targeted parallel to the solar axis would also be worthwhile.

Jaffe, L. D.↗
NASA NTRS1989

The interdisciplinary role of space geodesy; Proceedings of the International Workshop, Erice, Italy, July 23-29, 1988

The current status of space geodesy and research plans for the 1990s are discussed in reviews and reports. Sections are devoted to the short-term and long-term dynamics of the solid earth, interactions between space geodesy and other disciplines and programs (geodynamics, earth structure, ocean physics, atmosphere and climate, planetary science, and fundamental physics), instrumentation, data analysis, reference coordinate systems, and education. Also provided are overviews of the French, ESA, and NASA geodetic research programs and descriptions of the Soviet Glonass navigation satellites, the WEGENER/MEDLAS observation program, and the Lageos II laser-ranging satellites. Diagrams, graphs, maps, and tables of numerical data are provided.

Mueller, Ivan I.↗