Search NASA⌕ Search

SEARCH · Search NASA

Results for “precursors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

The production of glow precursors by oxidative erosion of spacecraft surfaces

Erosion rates of organic materials are measured during a recent flight of the shuttle (STS-8). Several forms of carbon and a variety of thermosetting and thermoplastic polymers are exposed to the ram beam of atomic oxygen. Arrhenius energies of about 1000 to 2000 cal/mole were measured from the rate dependencies on temperature. If some simple assumptions are made about the chemical nature of the desorbed species, the data can be used to estimate production rates at surfaces in orbit under different conditions of temperature, oxygen atom flux, and material surface conditions.

Gregory, J. C.↗
NASA NTRS1984

Structural synthesis: Precursor and catalyst

More than twenty five years have elapsed since it was recognized that a rather general class of structural design optimization tasks could be properly posed as an inequality constrained minimization problem. It is suggested that, independent of primary discipline area, it will be useful to think about: (1) posing design problems in terms of an objective function and inequality constraints; (2) generating design oriented approximate analysis methods (giving special attention to behavior sensitivity analysis); (3) distinguishing between decisions that lead to an analysis model and those that lead to a design model; (4) finding ways to generate a sequence of approximate design optimization problems that capture the essential characteristics of the primary problem, while still having an explicit algebraic form that is matched to one or more of the established optimization algorithms; (5) examining the potential of optimum design sensitivity analysis to facilitate quantitative trade-off studies as well as participation in multilevel design activities. It should be kept in mind that multilevel methods are inherently well suited to a parallel mode of operation in computer terms or to a division of labor between task groups in organizational terms. Based on structural experience with multilevel methods general guidelines are suggested.

Schmit, L. A.↗
NASA NTRS1986

A high spatial resolution study of microwave flare precursors

Several examples of preflare changes are provided from VLA high-resolution microwave data, which show that in general the active region increases in intensity and polarization over a period of several tens of minutes prior to the onset of a flare in that region. However, this phenomenon by itself does not appear to be sufficient to trigger a flare. It is shown that at 10 min or less before flare onset something else happens, usually in the form of one of the following three features: (1) sudden change of polarization of the flaring region, (2) change of orientation of the neutral plane separating one polarity from another in a bipolar region, and (3) appearance of new sources in the immediate vicinity of some preexisting structure of the active region. All three features are consistent with the emergence of new flux, which interacts with a preexisting region to form a neutral or current sheet. The formation of the latter is ultimately responsible for triggering the onset of a flare.

Kundu, M. R.↗
NASA NTRS1986

Solar burst precursors and energy build-up at microwave wavelengths

We summarize high-resolution microwave observations (VLA) of heating and magnetic triggering in coronal loops. Magnetic changes that precede solar eruptions on time scales of tens of minutes involve primarily emerging coronal loops and the interaction of two or more loops. Thermal cyclotron lines have been detected in coronal loops, suggesting the presence of hot current sheets that enhance emission from relatively thin layers of enhanced temperature and constant magnetic field. These current sheets may play a role in the excitation of solar bursts. A filament-associated source with a high brightness temperature and steep radiation spectrum occurs above a region of apparently weak photospheric field. This source might be attributed to currents that enhance coronal magnetic fields. Compact (phi=5 sec) transient sources with lifetimes of 30 to 60 minutes have also been detected in regions of apparently weak photospheric field. We conclude by comparing VLA observations of coronal loops with simultaneous SMM-XRP observations.

Lang, Kenneth R.↗
NASA NTRS1988

To what extent is mass loading responsible for the Venus bowshock precursor?

Significant ion and electron flux enhancements immediately upstream of the Venus bow shock were observed by the Electron Temperature Probe on the Pioneer Venus Orbiter. It is shown that mass loading of the solar wind by oxygen ions accounts for only about 10 percent of the observed effect.

Fontheim, Ernest G.↗
NASA NTRS1988

Polyimide/metal composite films via in situ decomposition of inorganic additives - Soluble polyimide versus polyimide precursor

Polyimide-metal oxide (Co3O4 or CuO) composite films have been prepared via in situ thermal decomposition of cobalt (II) chloride or bis(trifluoroacetylacetonato)copper(II). A soluble polyimide (XU-218) and its corresponding prepolymer (polyamide acid) were individually employed as the reaction matrix. The resulting composites exhibited a greater metal oxide concentration at the air interface with polyamide acid as the reaction matrix. The water of imidization that is released during the concurrent polyamide acid cure and additive decomposition is believed to promote metal migration and oxide formation. In contrast, XU-218 doped with either HAuCl4.3H2O or AgNO3 yields surface gold or silver when thermolyzed (300 C).

Rancourt, J. D.↗
NASA NTRS1989

The Venus precursor - An environmental effect on the Pioneer Venus spacecraft

Data obtained by the Pioneer Venus Orbiter's retarding potential analyzer during two orbits with periapsis in the subpolar region of Venus are presented. Two electron populations are observed: a low-temperature population that is interpreted to be an electron sheath population trapped in the positive spacecraft potential well, and a high-temperature population representing the ambient solar wind electron population. The sheath population's increase and decrease by a factor of 5, as the spacecraft approaches and recedes from a position near periapsis (independently of the bow shock's position relative to the spacecraft), is interpreted as being due to an increase and decrease in the density of cold electrons trapped in the spacecraft potential well.

Knudsen, William C.↗
NASA NTRS1989

Granulatic breccia clasts and feldspathic melt breccia clasts from North Ray crater breccia 67975 - Precursors and petrogenesis

A petrologic study of crystalline lithic clasts from feldspathic breccia 67975, collected on the rim of North Ray crater at the Apollo 16 site, is presented. A light gray group has been identified as granulitic breccias, and a dark gray group has been identified as feldspathic microporphyritic melt breccias. It is suggested that complete homogenization of the minerology of the granulitic breccias may have been prevented by their incorporation into the 67975 fragmental breccia, and that metamorphism of the clasts may have been interrupted by this breccia forming event.

Mcgee, J. J.↗
NASA NTRS1989

Ozone precursors and ozone photochemistry over eastern North Pacific during the spring of 1984 based on the NASA GTE/CITE 1 airborne observations

Simultaneous high-resolution measurements of O3, NO, CO, dew point temperature, and UV flux obtained during the NASA Global Tropospheric Experiment Chemical Instrumentation Test and Evaluation (GTE/CITE 1) spring 1984 airborne field exercise over the eastern North Pacific Ocean are analyzed. Mid-tropospheric CO, O3, and NO mixing ratios averaged about 120 parts per billion by volume (ppbv), 50 ppbv, and 10 parts per trillion by volume (pptv), respectively. Statistical analysis of the high-resolution data indicates the existence of two ozone sources, one related to the downward transport of ozone-rich air from the upper troposphere and stratosphere, and the other to the transport of ozone-rich air from the continents. Modeling calculations based on these average levels imply that, from the surface to about 8 km, photochemical reactions probably supplied a net sink of ozone to the region overlying the eastern North Pacific Ocean during the sampling period. However, because the NO levels measured during the flights were frequently at or near the detection limit of the instruments and because the results are very sensitive to the absolute NO levels and their temporal variability, the conclusion must be considered provisional.

Chameides, W. L.↗
NASA NTRS1989

Lightning trends as a precursor to microbursts

The feasibility of using lightning-rate data to aid in the early warning of microburst occurrence in moist environments is illustrated. Convective tendency images were generated for a small microburst-producing storm that developed in northern Alabama on July 20, 1986 during the Cooperative Huntsville Meteorological Experiment. Radar observations were obtained from the NCAR CP2 10-cm dual-polarization Doppler radar, while the measurements of total lightning activity were provided by the National Severe Storm Laboratory, a mobile laboratory that was located under the storm throughout its lifetime. The scenario for the evolution of wet microburst producing thunderstorms is described.

Buechler, Dennis E.↗
NASA NTRS1989

Preparation of 110K (Bi, Pb)-Sr-Ca-Cu-O superconductor from glass precursor

The Bi1.5Pb0.5Sr2Ca2Cu3O(x) glass, prepared by rapid quenching of the melt, showed T(sub g) of 383 C, crystallization temperature of approx. 446 C, melting temperature of approx. 855 C, and bulk density of 5.69 g/cu. cm. in air. The as-quenched glass was oxygen deficient. On heating in O2, it showed a slow, irreversible, and continuous weight gain starting at approx. 530 C. The influence of annealing conditions on the formation of various phases was investigated by XRD and electrical resistivity measurements. The 110K-T(sub c) phase did not form below 840 C. The amount of this phase increased with the sintering time at 840 C. A sample annealed at 840 C for 243 h in air and furnace cooled showed the highest T(sub c)(R=0) of 107.2K and transition width delta T(sub c)(10 to 90 percent) of approx. 2 K.

Bansal, Narottam P.↗
NASA NTRS1990

Initiation precursors and initiators in laser-induced copolymerization of styrene and maleic anhydride in acetone

The initiation step of photopolymerized styrene/maleic anhydride copolymer was investigated at 365 nm. UV absorption measurements provide decisive evidence that the styrene/maleic anhydride charge transfer complex is the sole absorbing species; however, key laser experiments suggest intermediate reactions lead to a monoradical initiating species. A mechanism for the photoinitiation step of the copolymer is proposed.

Miner, Gilda A.↗
NASA NTRS1990

Venus bowshock precursor

Significant ion and electron flux enhancements immediately upstream of the Venus bowshock have been observed by the Electron Temperature Probe on the Pioneer Venus Orbiter. It is shown that mass loading of the solar wind by oxygen ions (without the effect of MHD turbulence) accounts for only about 3.5 percent of the observed effect. Evidence is presented that turbulence may play a nonnegligible role in the ion pickup process in front of the Venus bowshock.

Fontheim, Ernest G.↗
NASA NTRS1989

Aerodynamic testing in cryogenic nitrogen gas - A precursor to testing in superfluid helium

Testing techniques for transonic cryogenic tunnels using nitrogen as the test fluid are presented. The measurement of static aerodynamic coefficients used to determine component efficiency is discussed, focusing on tests of two-dimensional airfoils at transonic Mach numbers. Also, three-dimensional tests of complete configurations and sidewall mounted wings are examined. Consideration is given to time-dependent phenomena, fluid mechanics, nonintrusive laser techniques, the detection of transition and separation, and testing for flutter, buffet, and oscillating airfoil characteristics.

Lawing, Pierce L.↗
NASA NTRS1990

Peroxyacetyl nitrate measurements during CITE 2 - Atmospheric distribution and precursor relationships

Results are reported from airborne PAN measurements obtained at altitudes 0-6 km over the continental U.S. and the eastern Pacific during the NASA Global Tropospheric Experiment Chemical Instrumentation Test and Evaluation 2 (CITE 2) in summer 1986. The CITE 2 flights and instrumentation are described, and the results are presented in extensive graphs and characterized in detail. It is shown that PAN is an important reactive N-containing species in the troposphere. Although the PAN mixing ratios were highly variable, in general high mixing ratios of 100-300 parts per trillion by volume (pptv) were found at 4-6 km, and very low ratios (5-20 pptv) were detected in the marine boundary layer. Good correlation was seen between the CITE 2 PAN values and those for O3, NO(y), NO(x), HNO3, C2H6, CO, and CFCl3.

Singh, H. B.↗
NASA NTRS1990

Evaluation of geophysical properties of the lunar regolith for the design of precursor scientific missions for the space exploration initiative

The following topics are addressed: (1) the frequency of encountering boulders that represent hazards to lunar operations; (2) the ease of lunar soil excavation; (3) the use of explosives in excavation operation; (4) the trafficability of the regolith; (5) problems encountered in mining (probably strip mining) of the regolith; (6) the stable angle(s) of repose in excavation of the regolith; (7) the layering to be encountered in the subsurface; (8) knowledge of the regolith site and the possibility of its general application to any site on the lunar surface; (9) the data needed to characterize a site for a lunar base; (10) the influence of regolith properties on the design of geophysical experiments from the lunar base; and (11) terrestrial analogues for the geophysical properties of the lunar regolith.

Morgan, Paul↗