Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantum state compression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Heat flow in the postquasistatic approximation

We apply the postquasistatic approximation to study the evolution of spherically symmetric fluid distributions undergoing dissipation in the form of radial heat flow. For a model that corresponds to an incompressible fluid departing from the static equilibrium, it is not possible to go far from the initial state after the emission of a small amount of energy. Initially collapsing distributions of matter are not permitted. Emission of energy can be considered as a mechanism to avoid the collapse. If the distribution collapses initially and emits one hundredth of the initial mass only the outermost layers evolve. For a model that corresponds to a highly compressed Fermi gas, only the outermost shell can evolve with a shorter hydrodynamic time scale.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Stress-strain state of mechanical rebar couplings

Mechanical rebar couplers are preferable in the advanced building construction and structural design of anti-seismic elements. The paper presents destructive inspection techniques used to investigate stress fields (tensile and compressive) and deformation curves for mechanical rebar splicing. The properties of mechanical rebar splicing are investigated by the non-destructive testing digital radiography. The behavior of real connections (column-to-column, beam-to-column) is studied under static and dynamic loads. Investigation results allow the elaboration of recommendations on their application in the universal prefabricated anti-seismic structural system developed at Tomsk State University of Architecture and Building, Tomsk, Russia.

42 ENGINEERING↗

Thermophysical Properties of Liquid Tritium: A Path Integral Monte Carlo Study

Here, we present worm-algorithm, path integral Monte Carlo simulations of bulk liquid tritium. The simulations are benchmarked against empirically known thermophysical properties of liquid deuterium and liquid tritium. Results for the pair correlation function, chemical potential, isothermal compressibility, isochoric heat capacity, and single-particle momentum distributions are reported. Given the benchmark comparisons, our predictions of liquid tritium properties are expected to be accurate to within a few percent. Our simulations unambiguously demonstrate the significance of nuclear quantum effects to the properties of liquid tritium. In particular, under saturated vapor pressure, the average molecular kinetic energy of the liquid is found to be more than 60% higher than the value expected from the classical equipartition theorem.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magneto-induced tunability of thermo-spin current in deformed zigzag graphene nanoribbons

The aim of this report is to unfold how the thermo-electric spin-polarized current in a transverse-biased zigzag graphene nanoribbon changes in the presence of uniaxial deformations and uniform perpendicular magnetic field. Employing the two-parameter Hubbard model along with the non-equilibrium Green's function formalism, we found that both uniaxial strain and magnetic field can significantly modulate the bandgap, local distribution of edge states, and the critical transverse electric field needed to achieve the half-metallic phase in the ribbon. Our analysis shows a significant enhancement of the maximum attainable spin-polarized current as functions of both source temperature and contacts temperature difference, with increasing the magnetic field or applying any magnitude of compressive strain. Furthermore, it is shown that the magneto-resistance ratio of the device, can be drastically tuned via strain engineering, reaching values as high as 2 × 10{sup 4}% for compressive strains of 5% magnitude.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Valley-Tunable Even-Denominator Fractional Quantum Hall State in the Lowest Landau Level of an Anisotropic System

Fractional quantum Hall states (FQHSs) at even-denominator Landau level filling factors (v) are of prime interest as they are predicted to host exotic, topological states of matter. Here, we report here the observation of a FQHS at v = 1/2 in a two-dimensional electron system of exceptionally high quality, confined to a wide AlAs quantum well, where the electrons can occupy multiple conduction-band valleys with an anisotropic effective mass. The anisotropy and multivalley degree of freedom offer an unprecedented tunability of the v = 1/2 FQHS as we can control both the valley occupancy via the application of in-plane strain, and the ratio between the strengths of the short- and long-range Coulomb interaction by tilting the sample in the magnetic field to change the electron charge distribution. Thanks to this tunability, we observe phase transitions from a compressible Fermi liquid to an incompressible FQHS and then to an insulating phase as a function of tilt angle. We find that this evolution and the energy gap of the v = 1/2 FQHS depend strongly on valley occupancy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Zero-Field Splitting Calculations by Multiconfiguration Pair-Density Functional Theory

Zero-field splitting (ZFS) is a fundamental molecular property that is especially relevant for single-molecule magnets (SMMs), electron paramagnetic resonance spectra, and quantum computing. Developing a method that can accurately predict ZFS parameters can be very powerful for designing new SMMs. One of the challenges is to include external correlation in an inherently multiconfigurational open-shell species for the accurate prediction of magnetic properties. Previously available methods depend on expensive multireference perturbation theory calculations to include external correlation. In this paper, we present spin-orbit-inclusive multiconfiguration and multistate pair-density functional theory (MC-PDFT) calculations of ZFSs; these calculations have a cost comparable to complete-active-space self-consistent field (CASSCF) theory, but they include correlation external to the active space. We found that combining a multistate formulation of MC-PDFT, namely, compressed-state multistate pair-density functional theory, with orbitals optimized by weighted-state-averaged CASSCF, yields reasonably accurate ZFS results

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonequilibrium formulation of varying-temperature bit erasure

Landauer's principle states that erasing a bit of information at fixed temperature T costs at least $k$ B $T$ ln 2 units of work. Here we investigate erasure at varying temperature, to which Landauer's result does not apply. Here we formulate bit erasure as a stochastic nonequilibrium process involving a compression of configuration space, with physical and logical states associated in a symmetric way. Erasure starts and ends at temperature T, but temperature can otherwise vary with time in an arbitrary way. Defined in this way, erasure is governed by a set of nonequilibrium fluctuation relations that show that varying-temperature erasure can done with less work than $k$ B $T$ ln 2. As a result, erasure and the complementary process of bit randomization can be combined to form a work-producing engine cycle.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Realizing the Power of Near-Term Quantum Technologies

This the final report of the LDRD project entitled "Realizing the Power of Near-Term Quantum Technologies", which was tasked with laying a theoretical foundation and computational framework for quantum simulation on quantum devices, to support both future Sandia efforts and the broader academic research effort in this area. The unifying theme of the project has been the desire to delineate more clearly the interface between existent classical computing resources that are vast and reliable with emerging quantum computing resources that will be scarce and unreliable for the foreseeable future. We seek to utilize classical computing resources to judge the efficacy of quantum devices for quantum simulation tasks and determine when they exceed the performance of classical devices, thereby achieving "quantum supremacy". This task was initially pursued by adapting the general concept of "parameter space compression" to quantum simulation. An inability to scale this analysis efficiently to large-scale simulations precipitated a shift in focus to assessing quantum supremacy of a specific quantum device, a 1D Bose gas trapped in an optical lattice, that was more amenable to large-scale analysis. We also seek to reconstruct unobserved information from limited observations of a quantum device to enhance their utility. This task was initially pursued as an application of maximum entropy reconstruction. Initial attempts to improve entropy approximations for direct reconstruction by free energy minimization proved to be more difficult than expected, and the focus shifted to the development of a quantum thermostat to facilitate indirect reconstruction by evolving a quantum Markov process. An efficient quantum thermostat is broadly useful for quantum state preparation in almost any quantum simulation task. In the middle of the project, a small opportunistic investment was made in a high-risk experiment to build an analog quantum simulator out of hole quantum dots in Ge/SiGe heterostructures. While a useful simulator was not produced, hole quantum dots at a Ge/SiGe interface have been successfully observed for the first time.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic structure of Co 3 d states in the Kitaev material candidate honeycomb cobaltate Na 3 Co 2 SbO 6 probed with x-ray dichroism

The recent prediction that honeycomb lattices of Co 2+ (3d 7 ) ions could host dominant Kitaev interactions provides an exciting direction for exploration of new routes to stabilizing Kitaev’s quantum spin liquid in real materials. Na 3 Co 2 SbO 6 has been singled out as a potential material candidate provided that spin and orbital moments couple into a J eff = $\frac{1}{2}$ ground state, and that the relative strength of trigonal crystal field and spin-orbit coupling acting on Co ions can be tailored. Using x-ray linear dichroism (XLD) and x-ray magnetic circular dichroism (XMCD) experiments, alongside configuration interaction calculations, we confirm the counterintuitive positive sign of the trigonal crystal field acting on Co 2+ ions and test the validity of the J eff = $\frac{1}{2}$ description of the electronic ground state. Furthermore, the results lend experimental support to recent theoretical predictions that a compression (elongation) of CoO 6 octahedra along (perpendicular to) the trigonal axis would drive this cobaltate toward the Kitaev limit, assuming the J eff = $\frac{1}{2}$ character of the electronic ground state is preserved.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Limited-Ranged Two-Phase Iron Equation of State Model

This report describes the construction of a two-phase EOS for Fe that includes both (hcp) and liquid phases, and which is meant to be valid over the restricted range: V ϵ [4 : 7] °A 3 /atom, and T ϵ [1000 : 20000] K. It was recently used as the basis for a theoretical study of liquid → solid phase transformation kinetics in Fe which appeared in the Supplemental Material for a paper describing a series of NIF shock + ramp compression experiments aimed at constraining the high-P melt curve of Fe.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High precision Hugoniot measurements on statically pre-compressed fluid helium

Here we describe how the capability for statically pre-compressing fluid targets for Hugoniot measurements utilizing gas gun driven flyer plates has been developed. Pre-compression expands the capability for initial condition control, allowing access to thermodynamic states off the principal Hugoniot. Absolute Hugoniot measurements with an uncertainty less than 3% on density and pressure were obtained on statically pre-compressed fluid helium utilizing a two stage light gas gun. Helium is highly compressible; the locus of shock states resulting from dynamic loading of an initially compressed sample at room temperature is significantly denser than the cryogenic fluid Hugoniot even for relatively modest (0.27–0.38 GPa) initial pressures. Lastly, the dynamic response of pre-compressed helium in the initial density range of 0.21–0.25 g/cm3 at ambient temperature may be described by a linear shock velocity (us) and particle velocity (u p ) relationship: u s = C 0 + su p , with C 0 = 1.44 ± 0.14 km/s and s = 1.344 ± 0.025.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

X-ray scattering measurements of dissociation-induced metallization of dynamically compressed deuterium

Hydrogen, the simplest element in the universe, has a surprisingly complex phase diagram. Because of applications to planetary science, inertial confinement fusion and fundamental physics, its high-pressure properties have been the subject of intense study over the past two decades. While sophisticated static experiments have probed hydrogen’s structure at ever higher pressures, studies examining the higher-temperature regime using dynamic compression have mostly been limited to optical measurement techniques. Here we present spectrally resolved x-ray scattering measurements from plasmons in dynamically compressed deuterium. Combined with Compton scattering, and velocity interferometry to determine shock pressure and mass density, this allows us to extract ionization state as a function of compression. Finally, the onset of ionization occurs close in pressure to where density functional theory-molecular dynamics (DFT-MD) simulations show molecular dissociation, suggesting hydrogen transitions from a molecular and insulating fluid to a conducting state without passing through an intermediate atomic phase.

36 MATERIALS SCIENCE↗

A cryogenically cooled, ultra-high-energy-resolution, trap-based positron beam

A technique is described to produce a pulsed, magnetically guided positron beam with significantly improved beam characteristics over those available previously. A pulsed, room-temperature positron beam from a buffer gas trap is used as input to a trap that captures the positrons, compresses them both radially and axially, and cools them to 50 K on a cryogenic CO buffer gas before ejecting them as a pulsed beam. The total energy spread of the beam formed using this technique is 6.9 ± 0.7 meV FWHM, which is a factor of ∼5 better than the previous state-of-the-art, while simultaneously having sub-microsecond temporal resolution and millimeter spatial resolution. Possible further improvements in beam quality are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structure of Shock Waves and Inelasticity in Shock-Compressed Cemented Tungsten Carbides

In this study, shock wave experiments are conducted on General Carbide cemented tungsten carbide with 3.7wt.% cobalt binder to determine its shock-induced compression behavior up to 100 GPa. The measured wave profiles indicate the cemented tungsten carbide to undergo elastic-plastic deformation during shock compression. A three-stage particle velocity profile is observed in the experiments -- an initial elastic-rise to the Hugoniot Elastic Limit (HEL), an elastic-plastic ramp indicating substantial post-yield hardening, and finally a rise to the peak shocked Hugoniot state. The results of the experiments are used to determine the HEL, the shock velocity (U s ) vs. particle velocity (u p ) Hugoniot relation, and the longitudinal stress (σ x ) vs. specific volume (V) curve for the samples. The HEL of the material was determined to lie between 4.41 GPa and 4.58 GPa. The U s - u p relation was determined to be U s = 4.97 + 1. 457u p for particle velocities greater than 0.75 km/s. The measured plastic shock velocities for particle velocities less than 0.7 km/s were found to be larger than those predicted using the linear U s - u p Hugoniot relationship, indicating the cemented WC samples to preserve substantial shear strength in the post-yield deformation region. No phase transformation was observed up to 100 GPa.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mechanical response of lithium fluoride under off-principal dynamic shock-ramp loading

Single crystal lithium fluoride (LiF), oriented [100], was shock loaded and subsequently shocklessly compressed in two experiments at the Z Machine. We employed velocimetry measurements in order to obtain an impactor velocity, shock transit times, and in-situ particle velocities for LiF samples up to ~1.8 mm thick. We also performed a dual thickness Lagrangian analysis on the in-situ velocimetry data to obtain the mechanical response along the loading path of these experiments. Finally, we observed an elastic response on one experiment during initial shockless compression from 100 GPa before yielding. The relatively large thickness differences utilized for the dual sample analyses (up to ~1.8 mm) combined with a relative timing accuracy of ~0.2 ns resulted in an uncertainty of less than 1% on density and stress at ~200 GPa peak loading on one experiment and <4% on peak loading at ~330 GPa for another. The stress-density analyses from these experiments compare favorably with recent equation of state models for LiF.

36 MATERIALS SCIENCE↗

Bonding, elastic and vibrational properties in low and high pressure synthesized diamond-like BCx phases

Recent studies demonstrate that low pressure chemical vapor deposition at 950 K leads to the synthesis of diamond-like boron carbides with high concentrations of boron (0.66 < x < 4) in which the sp 2 fraction depends on the boron concentration [1]. This indicates that the graphitic BC3 (g-BC3) phases obtained by chemical vapor deposition materials are mixtures of diamond-like and graphitic BCx phases. This finding allows us to revise the interpretation of the x-ray diffraction (XRD) patterns of the g-BC3 phases discussed previously [2, 3]. To support the new interpretation, we conducted a laser heating experiment of the g-BC3 phase. We found that after laser heating at 1100 K and 25 GPa in a diamond anvil cell (DAC) almost all graphitic layers of the g-BC3 transform into a cubic structure. The XRD pattern of the cubic BC3 phase (c-BC3) can be indexed with a cubic unit cell a = 3.619 (0.165) Å. Measurements of the equation of state of the g-BC3 phase demonstrated that boron atoms were incorporated into the graphitic B-C network. The linear compressibility along the c axis can be characterized by the value of the linear modulus Bc = 29.2 ± 1.8 GPa. Linear fitting of the experimental data for the a/a o parameter as a function of pressure gives us the value of the linear elastic modulus along the a axes: Ba = 800 ± 75 GPa.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Theory of criticality for quantum ferroelectric metals

A variety of compounds, for example, doped paraelectrics and polar metals, exhibit both ferroelectricity and correlated electronic phenomena such as low-density superconductivity and anomalous transport. Characterizing such properties is tied to understanding the quantum dynamics of inversion symmetry breaking in the presence of itinerant electrons. Here, we present a comprehensive analysis of the properties of a metal near a quantum critical transition to a ferroelectric state, in both two and three dimensions. In this study, starting from a minimal model of electrons coupled to a transverse polar phonon via a Rashba-type spin-orbit interaction, we compute the dynamical response of both electrons and phonons. We find that the system can evince both Fermi and non-Fermi liquid phases, as well as enhanced pairing in both singlet and triplet channels. Furthermore, we systematically compute corrections to one-loop theory and find a tendency to quantum order-by-disorder, leading to a phase diagram that can include second-order, first-order, and finite-momentum phase transitions. Finally, we show that the entire phase diagram can be controlled via application of external strain, either compressive or volume-preserving. Our results provide a map of the dynamical and thermodynamical phase space of quantum ferroelectic metals, which can serve in characterizing existing materials and in seeking applications for quantum technologies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Materials at Extreme Conditions [Slides]

The area of warm, dense matter (WDM) has received considerable attention recently due its identification with an assortment of environments as diverse as the interiors of exoplanets, the atmospheres of stars, inertial confinement fusion capsules, and the plasma from laser interactions with materials from clusters to nanostructures that span temperatures from a few thousand (~ 1 eV) to a few million (~ 100 eV) degrees Kelvin and densities from a few hundredths solid (~ 10 21 atoms/cm 3 ) to hundreds of times compressed solid (~ 10 26 atoms/cm 3 ). The WDM regime, which resembles a transient "soup" of atoms, molecules, ions, and free electrons, presents a particularly difficult challenge although one being met by high-energy-density physics (HEDP) experiments, involving high-powered lasers and pulse-power devices, as well as through the development of sophisticated theoretical and computation physics techniques. While the nuclei conform to a classical treatment within molecular dynamics simulations, the electrons require a quantum mechanical treatment of a large collection of atoms, periodically replicated in space. The electronic structure calculations, which closely resemble those of atomic and molecular physics for large molecules or clusters, generally utilize Density Functional Theory (DFT) approaches. From these simulations, we extract various properties such as equation-of-state, transport coefficients, and opacities, which characterize the particular regime. We discuss various theoretical procedures and examine several representative environments from planetary interiors to hot, dense plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗