SEARCH · Search NASA

Results for “radius equation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

NASA NTRS1997

Modeling of Water Injection into a Vacuum

A loosely coupled two-phase vacuum water plume model has been developed. This model consists of a source flow model to describe the expansion of water vapor, and the Lagrangian equations of motion for particle trajectories. Gas/Particle interaction is modeled through the drag force induced by the relative velocities. Particles are assumed traveling along streamlines. The equations of motion are integrated to obtain particle velocity along the streamline. This model has been used to predict the mass flux in a 5 meter radius hemispherical domain resulting from the burst of a water jet of 1.5 mm in diameter, mass flow rate of 24.2 g/s, and stagnation pressure of 21.0 psia, which is the nominal Orbiter water dump condition. The result is compared with an empirical water plume model deduced from a video image of the STS-29 water dump. To further improve the model, work has begun to numerically simulate the bubble formation and bursting present in a liquid stream injected into a vacuum. The technique of smoothed particle hydrodynamics was used to formulate this simulation. A status and results of the on-going effort are presented and compared to results from the literature.

Alred, John W.↗

NASA NTRS2012

Gravity, Topography, and Magnetic Field of Mercury from Messenger

On 18 March 2011, the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft was inserted into a 12-hour, near-polar orbit around Mercury, with an initial periapsis altitude of 200 km, initial periapse latitude of 60 deg N, and apoapsis at approximately 15,200 km altitude in the southern hemisphere. This orbit has permitted the mapping of regional gravitational structure in the northern hemisphere, and laser altimetry from the MESSENGER spacecraft has yielded a geodetically controlled elevation model for the same hemisphere. The shape of a planet combined with gravity provides fundamental information regarding its internal structure and geologic and thermal evolution. Elevations in the northern hemisphere exhibit a unimodal distribution with a dynamic range of 9.63 km, less than that of the Moon (19.9 km), but consistent with Mercury's higher surface gravitational acceleration. After one Earth-year in orbit, refined models of gravity and topography have revealed several large positive gravity anomalies that coincide with major impact basins. These candidate mascons have anomalies that exceed 100 mGal and indicate substantial crustal thinning and superisostatic uplift of underlying mantle. An additional uncompensated 1000-km-diameter gravity and topographic high at 68 deg N, 33 deg E lies within Mercury's northern volcanic plains. Mercury's northern hemisphere crust is generally thicker at low latitudes than in the polar region. The low-degree gravity field, combined with planetary spin parameters, yields the moment of inertia C/MR2 = 0.353 +/- 0.017, where M=3.30 x 10(exp 23) kg and R=2440 km are Mercury's mass and radius, and a ratio of the moment of inertia of Mercury's solid outer shell to that of the planet of Cm/C = 0.452 +/- 0.035. One proposed model for Mercury's radial density distribution consistent with these results includes silicate crust and mantle layers overlying a dense solid (possibly Fe-S) layer, a liquid Fe-rich outer core of radius 2030 +/- 37 km, and an assumed solid inner core. Magnetic field measurements indicate a northward offset of Mercury's axial magnetic dipole from the geographic equator by 479 +/-3 km and provide evidence for a regional-scale magnetic field approximately collocated with the northern volcanic plains of possible crustal origin. These results from MESSENGER indicate a complex and asymmetric evolution of internal structure and dynamics in this end-member inner planet.

Neumann, Gregory A.↗

NASA NTRS1995

Theory of the Effects of Small Gravitational Levels on Droplet Gasification

A mathematical model taking into account small (and constant) gravitational levels is developed for vaporization of an isolated liquid droplet suspended in a stagnant atmosphere. A goal of the present analysis is to see how small gravitational levels affect droplet gasification characteristics. Attention is focused upon determining the effects on gas-phase phenomena. The conservation equations arc normalized and nondimensionalized, and a small parameter that accounts for the effects of gravity is identified. This parameter is the square of the inverse of a Froude number based on the gravitational acceleration, the droplet radius, and a characteristic gas-phase velocity at the droplet surface. Asymptotic analyses are developed in terms of this parameter. In the analyses, different spatial regions are identified. Near a droplet, gravitational effects are negligible in the first approximation, and the flowfield is spherically symmetric to the leading order. Analysis shows, however, that outer zones exist where gravitational effects cannot be neglected; it is expected that a stagnation point will be present in an outer zone that is not present when gravity is totally absent. The leading order and higher-order differential equations for each zone are derived and solved. The solutions allow the effects of gravity on vaporization rates and temperature, velocity and species fields to be determined.

Beitelmal, A.↗

NASA NTRS1972

Determination of the effects of graphite material properties on ablation performance.

Application of statistical methods to the problem of identifying those material properties of artificial graphite having the strongest effect on ablation performance. Ablation performance, as determined by total length change during test, recession rate, surface temperature, surface texture, and degree of gouging, was measured on 40 different, commercially available, artificial graphites in a Mach 2 airstream having a nominal enthalpy of 2.2 MJ/kg and a stagnation pressure of 5.6 atm. Eighteen material properties were measured on these same graphites, and correlations between pairs of these material properties were developed where possible, reducing the original 18 properties to ten mutually independent properties. Multiple regression equations were formulated relating ablation performance to the reduced set of ten independent material properties, thereby identifying those material properties having the most pronounced effect on ablation performance. These regression equations reveal that for optimum ablation performance in the present environment, grain size should be small, ash content low, density and thermal conductivity high, and mean pore radius large.

Maahs, H. G.↗

NASA NTRS1972

A nonlinear analysis of pulsatile flow in arteries.

An approximate numerical method for calculating flow profiles in arteries is developed. The theory takes into account the nonlinear terms of the Navier-Stokes equations as well as the nonlinear behaviour and large deformations of the arterial wall. Through the locally measured values of the pressure, pressure gradient, and pressure-radius function, the velocity distribution and wall shear at a given location along the artery can be determined. The computed results agree well with the corresponding experimental data.

Ling, S. C.↗

NASA NTRS1979

Study of periodic motions of a satellite with a magnetic damper

The motion of a satellite with a magnetic damper in the plane of a circular polar orbit is studied. The asymptotics of periodic solutions are constructed for a satellite close to axisymmetric and the radius of convergence is evaluated for the power series obtained. In a broad range of values of parameters, a periodic solution is obtained by numerical integration of equations of motion of the satellite. The asymptotics of a bifurcated curve obtained (the curve on which origin of a pair of periodic solutions occurs) in the space of the parameters agrees well with the results of numerical computation with all physical values of these parameters. A breakdown is made of the space of the initial data of phase variables in the field of effect of different types of periodic motion.

Sadov, Y. A.↗

NASA NTRS1982

Three-dimensional elasticity solution of an infinite plate with a circular hole

The elasticity problem for a thick plate with a circular hole is formulated in a systematic fashion by using the z-component of the Galerkin vector and that of Muki's harmonic vector function. The problem was originally solved by Alblas. The reasons for reconsidering it are to develop a technique which may be used in solving the elasticity problem for a multilayered plate and to verify and extend the results given by Alblas. The problem is reduced to an infinite system of algebraic equations which is solved by the method of reduction. Various stress components are tabulated as functions of a/h, z/h, r/a, and nu, a and 2h being the radius of the hole and the plate thickness and nu, the Poisson's ratio. The significant effect of the Poisson's ratio on the behavior and the magnitude of the stresses is discussed.

Delale, F.↗

NASA NTRS1991

Computational dispersion properties of horizontal staggered grids for atmospheric and ocean models

The computational dispersion properties of horizontally and time-horizontally staggered grids utilizing corresponding centered-difference techniques for approximation of the adjustment, or gravity wave equations, are examined in terms of their group velocity characteristics. Results are acquired for oceanic and atmospheric models, the former being characterized by a much smaller Rossby radius of deformation. For all grids considered additional filtering is required to control and even eliminate waves with poor computational dispersion characteristics. Computational dispersion properties along with other computational characteristics and requirements give some guidance for an optimal selection of an appropriate grid for an ocean or atmospheric model.

Fox-Rabinovitz, Michael S.↗

NASA NTRS1992

Bending response of thin-walled laminated composite cylinders

Closed-form linear response solutions are presented for the bending response of thin-walled laminated composite cylinders. Displacements and intralaminar stresses are computed using the Donnell theory, and interlaminar stresses are computed using 3D equilibrium equations of elasticity. Laminates with stacking sequencies and an aluminum cylinder are used to illustrate the displacement response, intralaminar, and interlaminar stresses for two length-to-radius ratios of 1 and 5. Data obtained indicate that if only fiber breakage causes ultimate failure, material failure will occur on the compression side of the cylinders, at the ends, due to fiber compression. The interlaminar normal stress is an order of magnitude smaller than the interlaminar shear stresses and it is not likely to initiate failure.

Fuchs, H. P.↗

NASA NTRS1951

Analysis of plane-plastic stress problems with axial symmetry in strain-hardening range

A simple method is developed for solving plane-plastic-stress problems with axial symmetry in the strain-hardening range which is based on the deformation theory of plasticity employing the finite-strain concept. The equations defining the problems are first reduced to two simultaneous nonlinear differential equations involving two dependent variables: (a) the octahedral shear strain, and (b) a parameter indicating the ratio of principal stresses. By multiplying the load and dividing the radius by an arbitrary constant, it is possible to solve these problems without iteration for any value of the modified load. The constant is determined by the boundary condition. This method is applied to a circular membrane under pressure, a rotating disk without and with a central hole, and an infinite plate with a circular hole. Two materials, inconel x and 16-25-6, the octahedral shear stress-strain relations of which do not follow the power law, are used. Distributions of octahedral shear strain, as well as of principal stresses and strains, are obtained. These results are compared with the results of the same problems in the elastic range.

Wu, M H Lee↗

NASA NTRS1998

Emittance Theory for Cylindrical Fiber Selective Emitter

A fibrous rare earth selective emitter is approximated as an infinitely long, cylinder. The spectral emittance, e(sub x), is obtained L- by solving the radiative transfer equations with appropriate boundary conditions and uniform temperature. For optical depth, K(sub R), where alpha(sub lambda), is the extinction coefficient and R is the cylinder radius, greater than 1 the spectral emittance depths, K(sub R) alpha(sub lambda)R, is nearly at its maximum value. There is an optimum cylinder radius, R(sub opt) for maximum emitter efficiency, n(sub E). Values for R(sub opt) are strongly dependent on the number of emission bands of the material. The optimum radius decreases slowly with increasing emitter temperature, while the maximum efficiency and useful radiated power increase rapidly with increasing, temperature.

Chubb, Donald L.↗

NASA NTRS2001

A Non-Linear Approach to Spacecraft Formation Control in the Vicinity of a Collinear Libration Point

An expanding interest in mission design strategies that exploit libration point regions, demands the continued development of enhanced, efficient, control algorithms for station-keeping and formation maintenance. Linear control strategies have been developed for station-keeping. However, their region of stability is bounded by the assumptions required for linearizing the governing equations of motion. For example, reference [I] discusses the development of a linear control design for maintaining a halo orbit about the Earth-Moon L2 libration point. Trial runs indicated the trajectory was unstable for starting points exceeding 45,000 km from the L2 point. Also, there was significant growth in the control effort required to maintain the orbit as the nominal radius increased. This result is a consequence of the increased influence of the system non-linearities, as the trajectory deviated from the linearization point, L2. As an alternative, this paper presents the development of a non-linear control strategy, based on a Hamiltonian formulation of the equations of motion. The control strategy is applied to the problem of formation maintenance, rather than simple station

Luquette, Richard J.↗

NASA NTRS1993

Mass balance approaches for estimating the intestinal absorption and metabolism of peptides and analogues: theoretical development and applications

A theoretical analysis for estimating the extent of intestinal peptide and peptide analogue absorption was developed on the basis of a mass balance approach that incorporates convection, permeability, and reaction. The macroscopic mass balance analysis (MMBA) was extended to include chemical and enzymatic degradation. A microscopic mass balance analysis, a numerical approach, was also developed and the results compared to the MMBA. The mass balance equations for the fraction of a drug absorbed and reacted in the tube were derived from the general steady state mass balance in a tube: [formula: see text] where M is mass, z is the length of the tube, R is the tube radius, Pw is the intestinal wall permeability, kr is the reaction rate constant, C is the concentration of drug in the volume element over which the mass balance is taken, VL is the volume of the tube, and vz is the axial velocity of drug. The theory was first applied to the oral absorption of two tripeptide analogues, cefaclor (CCL) and cefatrizine (CZN), which degrade and dimerize in the intestine. Simulations using the mass balance equations, the experimental absorption parameters, and the literature stability rate constants yielded a mean estimated extent of CCL (250-mg dose) and CZN (1000-mg dose) absorption of 89 and 51%, respectively, which was similar to the mean extent of absorption reported in humans (90 and 50%). It was proposed previously that 15% of the CCL dose spontaneously degraded systematically; however, our simulations suggest that significant CCL degradation occurs (8 to 17%) presystemically in the intestinal lumen.(ABSTRACT TRUNCATED AT 250 WORDS).

Non-NASA Center↗

NASA NTRS1975

Investigation B: Laminar confined coaxial entrance flow with heat generation

The results of a parametric study on the entrance flow region in a gas core nuclear reactor are presented. The physical system is modeled as laminar confined, coaxial flow with heat generation in the inner fluid. The governing equations include the boundary layer approximations and the assumptions of only radial radiative transport of energy represented as an energy diffusion term. The Von Mises transformation and a zeta transformation are used to transform the equations into nonlinear nonhomogeneous convective-diffusion equations. A unique combination of forward and backward difference equations which yields accurate results at moderate computational times, is used in the numerical method. Results show that the rapidly accelerating, heat generating inner stream actually shrinks in radius as it expands axially.

Bobba, G. K. M.↗

NASA NTRS1992

Two-dimensional viscous accretion disk models. I - On meridional circulations in radiative regions

It has been suggested that thin Keplerian disks, like rotating stars, cannot attain hydrostatic and thermal equilibrium simultaneously if the angular velocity is a function of radius only. To address the problem of vertical structure and stability of thin accretion disks, we performed 2D axisymmetric calculations by solving the set of fully nonlinear hydrodynamic equations, including radiation transport. The results indicate that the variation of the rotational velocity with height is too small to sustain hydrostatic equilibrium. Instead, the variation of the radial (inflow) velocity with height suffices to establish a stationary state. In particular, we find that for low values of the viscosity parameter alpha, there is mass outflow in the central parts of the disk close to the equatorial plane, and inflow only near the surface. Only for modestly high values of alpha, the flow throughout the disk is directed inward. Thus, the flow within the disk is the result of viscous radial inflow plus a circulatory flow directed outward in the midplane and inward near the surface.

Kley, W.↗

NASA NTRS1955

A method of quadrature for calculation of the laminar and turbulent boundary layer in case of plane and rotationally symmetrical flow

For calculation of the characteristic parameters of the boundary layer (momentum-loss thickness and form parameter for the velocity profile), two quadrature formulas are given which are valid for the laminar as well as for the turbulent state of flow. These formulas cover both the two-dimensional and the rotationally symmetrical case. The calculation of the momentum-loss thickness is carried out by a simple integration of the energy theorem. The equation for the form parameter is obtained by coupling of the momentum theorem with the energy theorem. Knowledge of the derivatives of the velocity distribution and of the radius of the body along the length x is not necessary.

FLOW, TURBULENT↗

NASA NTRS1998

Emittance Theory for Cylindrical Fiber Selective Emitter

A fibrous rare earth selective emitter is approximated as an infinitely long cylinder. The spectral emittance, epsilon(lambda), is obtained by solving the radiative transfer equations with appropriate boundary conditions and uniform temperature. For optical depths, Kappa(R) = alpha(lambda)R, where alpha(lambda) is the extinction coefficient and R is the cylinder radius, greater than 1 the spectral emittance is nearly at its maximum value. There is an optimum cylinder radius, R(opt), for maximum emitter efficiency, eta(E). Values for R(opt) are strongly dependent on the number of emission bands of the material. The optimum radius decreases slowly with increasing emitter temperature, while the maximum efficiency and useful radiated power increase rapidly with increasing temperature.

Chubb, Donald L.↗

NASA NTRS2000

Numerical Calculation of the Drag Force Acting on a Solid Particle Pushed by a Solid/Liquid Interface

The distribution of insoluble particles in a metal casting depends primarily on the interaction of the particles with the solid/liquid interface (SLI) during the solidification process. The balance of the forces acting on the particle essentially determines whether a particle will be engulfed or pushed by the SLI. An important component of this force balance is the drag force generated by the particle motion in front of the SLI. Previously developed mathematical models for particle/SLI interaction made use of steady-state solutions of this force provided by the lubrication theory. However, our numerical model based on the SLI tracking approach shows that the steady-state approach is inappropriate to model the interaction process and that at steady-state the theoretical solution underestimates the drag force. It was found that regression analysis of steady-state numerical solutions for cylindrical particles moving normal to a flat SLI gives a relationship of the form: Abstract The distribution of insoluble particles in a metal casting depends primarily on the interaction of the particles with the solid/liquid interface (SLI) during the solidification process. The balance of the forces acting on the particle essentially determines whether a particle will be engulfed or pushed by the SLI. An important component of this force balance is the drag force generated by the particle motion in front of the SLI. Previously developed mathematical models for particle/SLI interaction made use of steady-state solutions of this force provided by the lubrication theory. However, our numerical model based on the SLI tracking approach shows that the steady-state approach is inappropriate to model the interaction process and that at steady-state the theoretical solution underestimates the drag force. It was found that regression analysis of steady-state numerical solutions for cylindrical particles moving normal to a flat SLI gives a relationship of the form: F(sub D, sup num) =sqoare root of 3(pi)(eta)V(sub p)(R(sub p)/d)(sup 10(gamma)/3). This is to compared to the solution provided by the lubrication theory: F(sub D), sup theor) = 3 square root of 2(pi)(eta)V(sub p)(R(sub p)/d)(sub 3/2), where F(sub D) is the drag force, eta is the dynamic viscosity of the fluid, V(sub p) is the particle velocity, R(sub p) is the particle radius, gamma is Euler's constant (gamma approx. = 0.577), and d is the width of the gap between the particle and the SLI. The domain on which the equations proposed by the lubrication theory are relevant is clearly identified in the paper. The numerical model was then validated against the classical lubrication theory within the domain of its validity.

Catalina, Adrian V.↗