SEARCH · Search NASA

Results for “ring”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Design and Testing of the Vortex Ring Facility

This document summarizes the efforts of building an experimental test facility to study the evolution of the cloud following a nuclear detonation above ground level and support the development of numerical models to describe it. The experimental facility allows nonintrusive flow visualization and measurements of buoyant vortex ring formation and evolution using background-oriented Schlieren and particle image velocimetry techniques. In addition, 3D unsteady computational fluid dynamics simulations using unsteady Reynolds-averaged Navier–Stokes and volume-of-fluid numerical methods were performed to support the experimental design as well as to provide insight about the formation and evolution of the vortex ring.

42 ENGINEERING↗

DOE OSTI2023

Drop C: The Drop-In, Ring-of-Power Heliostat (Final Report)

This report summarizes the work performed within the Drop-C: The Drop-In, Ring-of-Power Heliostat project. The Drop-C project aimed to develop a novel heliostat with an installed cost of $\$50$/m 2 ($\$2015$) which is a drastic cost reduction compared to the state-of-the-art. The resulting 27m 2 SunRing TM heliostat’s relative small size necessitates the parallel development of a wireless solar field network and a rapid calibration system. The SunRing heliostat is an evolution of the Ring-of-Power (ROP) design from Abengoa Solar LLC which had a reported installed cost of $114/m 2 . Cost savings relative to the ROP were sought by increasing the mirror area, improving the structural efficiency, a more accurate assessment of wind loads, and an improved assembly and installation procedure. The project spanned three Budget Periods (BP) where a digital heliostat was developed in BP1 using wind tunnel testing to define load conditions.

14 SOLAR ENERGY↗

DOE OSTI2023

Electron cloud thresholds at the arcs of the Electron-Ion Collider hadron storage ring

The Electron-Ion Collider is designed to provide high-luminosity collisions. For the highest lu minosity scenario, the hadron storage ring will host a 275 GeV beam consisting of 1160 bunches with 6.9e10 protons per bunch. Previous work has found that some sections of the hadron storage ring will experience electron cloud buildup if their vacuum chamber does not show a sufficiently low secondary electron emission value. This technical note reviews the electron cloud growth thresholds for the updated screen profile and lattice.

43 PARTICLE ACCELERATORS↗

DOE OSTI2023

Quarknet Project: Simulating Double-Source Plane Lenses and Einstein Rings for Domain Adaptation

Double-Source Plane Lenses (DSPLs) are a form of strong gravitational lensing that can be used to uniquely constrain cosmological parameters like the dark energy equation of state. These objects are exceedingly rare: to date, only four have been discovered in astronomical surveys, like the Sloan Digital Sky Survey and the HyperSuprimeCam Survey. Additionally, the main features of these objects are typically co-located sets of arcs, which look like Einstein Rings of single-source galaxy-galaxy lenses. Larger astronomical surveys typically have low image resolution, which significantly exacerbates issues when trying to find DSPLs. Future surveys are likely to include many more of these objects and have higher image resolution. Traditional methods for finding strong lenses struggle to identify simple galaxy-galaxy lenses. Recently, neural networks have become the standard for lens identification, but these tools have not yet been used to search for DSPLs. In this work, we use the software deeplenstronomy to simulate varied images of DSPLs and Einstein Rings – with and without noise and artifacts of observational surveys, forming a comprehensive benchmark dataset of 40,000 images. We utilise this dataset to perform experiments with convolutional neural networks to discern between the two phenomena. Sofia Grimm and Jerry Zhou are co-first authors on this work.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2022

Measuring the Electric Dipole Moment of the Electron in a Two-Energy Spin-Transparent Storage Ring

We will present a new design of a two-energy storage ring for low energy (0.2 to 2 MeV) polarized electron bunches [1]. The new design is based on the transparent spin methodology that cancels the spin precession due to the magnetic dipole moment at any energy while allowing for spin precession induced by the fundamental physics of interest to accumulate. The buildup of the vertical component of beam polarization can be measured using standard Mott polarimetry that is optimal at low electron energy. These rings can be used to measure the permanent electric dipole moment of the electron, relevant to CP violation and matter-antimatter asymmetry in the universe, and to search for dark energy and ultra-light dark matter.

Suleiman, R.↗

DOE OSTI2024

Low-Alpha Operation of the IOTA Storage Ring

Operation with ultra-low momentum-compaction factor (alpha) is a desirable capability for many storage rings and synchrotron radiation sources. For example, low-alpha lattices are commonly used to produce picosecond bunches for the generation of coherent THz radiation and are the basis of a number of conceptual designs for EUV generation via steady-state microbunching (SSMB). Achieving ultra-low alpha requires not only a high-level of stability in the linear optics but also flexible control of higher-order compaction terms. Operation with lower momentum-compaction lattices has recently been investigated at the IOTA storage ring at Fermilab. Experimental results from some initial feasibility studies will be discussed in the context of ensuring an improved understanding of the IOTA optics for future research programs.

43 PARTICLE ACCELERATORS↗

DOE OSTI2024

Formalism for Local Correction of Vertical Crabbing in Hadron Storage Ring

The Electron-Ion Collider (EIC) incorporates crab cavities in both the Electron Storage Ring (ESR) and the Hadron Storage Ring (HSR) to achieve unprecedented luminosity goals. This technical note presents a formalism for the local correction of vertical crabbing in the HSR, addressing the complexities introduced by the integration of crab cavities and the interplay between betatron coupling and crabbing dispersion. Various strategies, including the use of skew quadrupoles and adjustments of Twiss functions, are explored to compensate vertical crabbing to achieve optimal beam-beam performance. The derived theoretical formulas offer practical guidance for minimizing the required vertical crabbing corrections, and will be implemented in the HSR lattice design.

43 PARTICLE ACCELERATORS↗

DOE OSTI2024

Optical Properties of Wigglers for EIC Ring Electron Cooler

Electron Ion Collider (EIC) requires cooling of protons at top energy (275 GeV) to achieve the average design luminosity. Such a cooler must be capable of counteracting an IBS-driven emittance growth in proton bunches. The Ring Electron Cooler (REC) is a candidate for the EIC top energy cooler. The REC is a non-magnetized RF-based 150 MeV electron cooler, in which electrons are kept in the storage ring and re-utilized for several million turns. The REC is equipped with 18 damping wigglers, which keep electrons’ emittance constant by counteracting both electrons’ IBS and a proton electron beam-beam scattering happening in the cooling section. These wigglers operate at a relatively low energy but must have a rather high field to provide the required radiation cooling of electrons. As a result of this unique range of parameters, the wigglers’ optics exhibits interesting features The actual design parameters of the wigglers will be finalized in the REC lattice optimization.

43 PARTICLE ACCELERATORS↗

DOE OSTI2023

Perspective of a Dual Energy Electron Storage Ring Cooler for a Hadron Beam Cooling

A dual energy electron storage ring cooler was proposed and explored to maintain a good hadron beam quality against intra-beam scattering and all heating sources in a collider. The unique configuration of this concept is that electron beam in the low energy section extracts heat away from the hadron beam through Coulomb interaction while electron beam in the high energy section releases heat through its intrinsic synchrotron radiation damping. The early design employs a magnetized electron beam for achieving a high cooling efficiency. Recently, a non-magnetized cooling electron beam was explored in this dual energy cooler. It could meet the same cooling requirements while lowering the risks. This paper presents study results on design and optimization of a dual energy storage ring cooler and describes the trade-offs between using magnetized and non-magnetized cooling for this approach.

Lin, Fanglei↗

DOE OSTI2025

Analytical estimates of beam intensity limitations in the EIC Beam Accumulator Ring

This report summarizes analytical estimates of beam intensity limitations in the Beam Accumulator Ring (BAR), a part of the Electron-Ion Collider injector complex under development at Brookhaven National Laboratory. The BAR is designed to accumulate a polarized electron beam with a single-bunch charge up to 28 nC for subsequent acceleration in the Rapid Cycling Synchrotron and then injection into the Electron Storage Ring. Analytical models of longitudinal and transverse collective effects are developed using a broadband impedance model calibrated with the beam-based measurement results from NSLS VUV. The study evaluates the impact of resistive-wall and geometric impedances, assessing microwave and transverse mode coupling instabilities, bunch lengthening, and beam-induced heating.

43 PARTICLE ACCELERATORS↗

DOE OSTI2021

Protoplanetary Disk Rings as Sites for Planetesimal Formation

Axisymmetric dust rings are a ubiquitous feature of young protoplanetary disks. These rings are likely caused by pressure bumps in the gas profile; a small bump can induce a traffic-jam-like pattern in the dust density, while a large bump may halt radial dust drift entirely. The resulting increase in dust concentration may trigger planetesimal formation by the streaming instability (SI), as the SI itself requires some initial concentration of dust. Here we present the first 3D simulations of planetesimal formation in the presence of a pressure bump modeled specifically after those seen by Atacama Large Millimeter/submillimeter Array. We place a pressure bump at the center of a large 3D shearing box, along with an initial solid-to-gas ratio of Z = 0.01, and we include both particle back-reaction and particle self-gravity. We consider millimeter-sized and centimeter-sized particles separately. For simulations with centimeter-sized particles, we find that even a small pressure bump leads to the formation of planetesimals via the SI; a pressure bump does not need to fully halt radial particle drift for the SI to become efficient. Furthermore, pure gravitational collapse via concentration in pressure bumps (such as would occur at sufficiently high concentrations and without the SI) is not responsible for planetesimal formation. For millimeter-sized particles, we find tentative evidence that planetesimal formation does not occur. If this result is confirmed at higher resolution, it could put strong constraints on where planetesimals can form. Ultimately, our results show that for centimeter-sized particles planetesimal formation in pressure bumps is extremely robust.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2021

The Polarized Image of a Synchrotron-emitting Ring of Gas Orbiting a Black Hole

Synchrotron radiation from hot gas near a black hole results in a polarized image. The image polarization is determined by effects including the orientation of the magnetic field in the emitting region, relativistic motion of the gas, strong gravitational lensing by the black hole, and parallel transport in the curved spacetime. We explore these effects using a simple model of an axisymmetric, equatorial accretion disk around a Schwarzschild black hole. By using an approximate expression for the null geodesics derived by Beloborodov and conservation of the Walker–Penrose constant, we provide analytic estimates for the image polarization. We test this model using currently favored general relativistic magnetohydrodynamic simulations of M87*, using ring parameters given by the simulations. For a subset of these with modest Faraday effects, we show that the ring model broadly reproduces the polarimetric image morphology. Our model also predicts the polarization evolution for compact flaring regions, such as those observed from Sgr A* with GRAVITY. With suitably chosen parameters, our simple model can reproduce the EVPA pattern and relative polarized intensity in Event Horizon Telescope images of M87*. Under the physically motivated assumption that the magnetic field trails the fluid velocity, this comparison is consistent with the clockwise rotation inferred from total intensity images.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2026

Ring Asymmetry and Spin in M87*

Event Horizon Telescope (EHT) images of the supermassive black hole M87* depict an asymmetric ring of emission. General relativistic magnetohydrodynamic (GRMHD) models of M87* and its accretion disk predict that the amplitude and location of the ring’s peak brightness asymmetry should fluctuate due to turbulence in the source plasma. We compare the observed distribution of brightness asymmetry amplitudes to the simulated distribution in GRMHD models, across varying black hole spin a * . We show that, for strongly magnetized (MAD) models, three epochs of EHT data marginally disfavor ∣a * ∣ ≲ 0.2. This is consistent with the Blandford–Znajek model for M87’s jet, which predicts that M87* should have nonzero spin. We show quantitatively how future observations could improve spin constraints and discuss how improved spin constraints could distinguish between differing jet-launching mechanisms and black hole growth scenarios.

Bernshteyn, Vadim [Univ. of Illinois at Urbana-Cha↗

DOE OSTI2020

Methods for making bacteriochlorin macrocycles comprising an annulated isocyclic ring and related compounds

Described herein are bacteriochlorins comprising an annulated isocyclic ring such as a compound Formula I: or a metal conjugate thereof, wherein: R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, and Z are each as defined herein. Also described are methods and intermediates for the synthesis of bacteriochlorins comprising an annulated isocyclic ring, and methods of using such bacteriochlorins for, among other things, diagnostic and therapeutic purposes such as, e.g., luminescent compounds in flow cytometry, and/or as active agents in photodynamic therapy (PDT).

Lindsey, Jonathan S.↗

DOE OSTI2021

Locking side pull hoist ring assembly

An assembly for rotating a workpiece including a locking side pull hoist ring removably attachable to a side surface of the workpiece. The locking side pull hoist ring comprises a load bearing structure, a rotation mechanism attached to the side surface of the workpiece that rotates about a rotation axis extending through the rotation mechanism, a locking mechanism configured to transition between a locked state and an unlocked state, and a support member connecting the load bearing structure and the rotation mechanism. The support member rotatably supports the rotation mechanism for rotation about the rotation axis and rotatably supports the load bearing structure for rotation about a second axis. In the locked state, the locking mechanism prevents rotation of the rotation mechanism by securing the rotation mechanism to the support member.

Nadiadi, Irfan Yunas↗

DOE OSTI2022

Ion Coulomb Crystals in Storage Rings for Quantum Information Science

Quantum information science is a growing field that promises to take computing into a new age of higher performance and larger scale computing as well as being capable of solving problems classical computers are incapable of solving. The outstanding issue in practical quantum computing today is scaling up the system while maintaining interconnectivity of the qubits and low error rates in qubit operations to be able to implement error correction and fault-tolerant operations. Trapped ion qubits offer long coherence times that allow error correction. However, error correction algorithms require large numbers of qubits to work properly. We can potentially create many thousands (or more) of qubits with long coherence states in a storage ring. For example, a circular radio-frequency quadrupole, which acts as a large circular ion trap and could enable larger scale quantum computing. Such a Storage Ring Quantum Computer (SRQC) would be a scalable and fault tolerant quantum information system, composed of qubits with very long coherence lifetimes. With computing demands potentially outpacing the supply of high-performance systems, quantum computing could bring innovation and scientific advances to particle physics and other DOE supported programs. Increased support of R$\&$D in large scale ion trap quantum computers would allow the timely exploration of this exciting new scalable quantum computer. The R$\&$D program could start immediately at existing facilities and would include the design and construction of a prototype SRQC. We invite feedback from and collaboration with the particle physics and quantum information science communities.

43 PARTICLE ACCELERATORS↗

DOE OSTI2022

Gated ring oscillator with constant dynamic power consumption

A pure digital ring oscillator with constant power consumption as oscillation frequency is adjusted. Circuit topology includes a multiplexer implemented in NAND gates and a delay element positioned after a path selection NAND gate of that multiplexer such that delay element transistors may not toggle if the non-delaying signal path is selected. Assuming a delay element oscillation frequency f and a total capacitance C, and also assuming a plurality N of delay gates each characterized by a propagation delay t1 and a capacitance C1 such that C=C1*N, the ring oscillator of the present invention is characterized by a C value that is proportional to N and an f value that is inversely proportional to N. Furthermore, each of the N delay gates as well as the input and output gates of the multiplexer are characterized by a common capacitance-to-propagation delay ratio=C1/t1.

Wu, Jinyuan↗

DOE OSTI2021

The Concept and Applications of a Dual Energy Storage Ring

A dual energy electron storage ring configuration is initially proposed as an electron cooler to cool the ion beam in a collider. It consists of two energy loops, the electron beam in the high energy loop undergoes the synchrotron radiation damping to obtain the desired beam property and the beam in the low energy loop is for cooling of the ion beam. The two different energy loops are connected by an energy recovery linac. A lattice design of such a dual energy storage ring has been completed and beam stability conditions are established. We performed numerical simulations to demonstrate the beam qualities and evaluated the cooling performance. In this paper, we present the study results and discuss possible applications of such a concept in many physics research and medical fields.

Dhital, B.↗