SEARCH · Search NASA

Results for “servers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

NASA NTRS1975

Cost performance satellite design using queueing theory

A modified Poisson arrival, infinite server queuing model is used to determine the effects of limiting the number of broadcast channels (C) of a direct broadcast satellite used for public service purposes (remote health care, education, etc.). The model is based on the reproductive property of the Poisson distribution. A difference equation has been developed to describe the change in the Poisson parameter. When all initially delayed arrivals reenter the system a (C plus 1) order polynomial must be solved to determine the effective value of the Poisson parameter. When less than 100% of the arrivals reenter the system the effective value must be determined by solving a transcendental equation. The model was used to determine the minimum number of channels required for a disaster warning satellite without degradation in performance. Results predicted by the queuing model were compared with the results of digital simulation.

Hein, G. F.↗

NASA NTRS1980

On the congruent feature in NASTRAN

The congruent feature, which is a capability in NASTRAN that can contribute to significant increases in computational efficiencies, is discussed. The usage of the capability and the software design characteristics affecting it are explained. The factors affecting the efficiency of the feature are pointed out. The details pertaining to the software design of the congruent feature are presented; in particular, the congruent element table is described. Serveral examples employing the congruent feature are considered and comparisons of Element Matrix Generator module computer program update times with and without this feature are presented. The results clearly demonstrate the role of the congruent feature in increasing computational efficiencies and its applicability to large-size problems.

Pamidi, P. R.↗

NASA NTRS1980

Optimized laser turrets for minimum phase distortion

An analysis and computer program which optimizes laser turret geometry to obtain minimum phase distortion is described. Phase distortion due to compressible, inviscid flow over small perturbation laser turrets in subsonic or supersonic flow is calculated. The turret shape is determined by a two dimensional Fourier series; in a similar manner, the flow properties are given by a Fourier series. Phase distortion is calcualted for propagation at serveral combinations of elevation and azimuth angles. A sum is formed from the set of values, and this sum becomes the objective function for an optimization computer program. The shape of the turret is varied to provide minimum phase distortion.

Vanderplaats, G. N.↗

NASA NTRS1980

Some queuing network models of computer systems

Queuing network models of a computer system operating with a single workload type are presented. Program algorithms are adapted for use on the Texas Instruments SR-52 programmable calculator. By slightly altering the algorithm to process the G and H matrices row by row instead of column by column, six devices and an unlimited job/terminal population could be handled on the SR-52. Techniques are also introduced for handling a simple load dependent server and for studying interactive systems with fixed multiprogramming limits.

Herndon, E. S.↗

NASA NTRS1981

Mathematical modeling and SAR simulation multifunction SAR technology efforts

The orbital SAR (synthetic aperture radar) simulation data was used in several simulation efforts directed toward advanced SAR development. Efforts toward simulating an operational radar, simulation of antenna polarization effects, and simulation of SAR images at serveral different wavelengths are discussed. Avenues for improvements in the orbital SAR simulation and its application to the development of advanced digital radar data processing schemes are indicated.

Griffin, C. R.↗

NASA NTRS1982

Interaction between the SPS solar power satellite solar array and the magnetospheric plasma

The results of study to determine the effects of space plasmas on a large GaAs solar cell array using solar reflectors at a concentration ratio of two in geostationary orbit are summarized. It was concluded that the system could function in the GEO environment if certain design changes were implemented. These included conductive coatings on the solar cells, changing the reflector material from Kapton to a higher conductivity material, and oversizing the array to compensate for a 0.7% parasitic load due to losses from the ambient magnetospheric plasma. The operation of the solar powered earth orbit transfer vehicle (EOTV) was also examined and it was concluded that LEO servere arcing would take place on all high voltage negative portions of the array. The parasitic load loss at LEO was estimated at 3%. Operation of a high voltage array at LEO represents a major problem. Charge exchange ion feedback from argon ion thrusters located near the EOTV solar array was also examined and all problems found were believed to be solvable by the placement of protective ground screens.

Freeman, J. W.↗

NASA NTRS1983

Elastohydrodynamics of elliptical contacts for materials of low elastic modulus

The influence of the ellipticity parameter k and the dimensionless speed U, load W, and materials G parameters on minimum film thickness for materials of low elastic modulus was investigated. The ellipticity parameter was varied from 1 (a ball-on-plane configuration) to 12 (a configuration approaching a line contact); U and W were each varied by one order of magnitude. Seventeen cases were used to generate the minimum- and central-film-thickness relations. The influence of lubricant starvation on minimum film thickness in starved elliptical, elastohydrodynamic configurations was also investigated for materials of low elastic modulus. Lubricant starvation was studied simply by moving the inlet boundary closer to the center of the conjunction in the numerical solutions. Contour plots of pressure and film thickness in and around the contact were presented for both fully flooded and starved lubrication conditions. It is evident from these figures that the inlet pressure contours become less circular and closer to the edge of the Hertzian contact zone and that the film thickness decreases substantially as the serverity of starvation increases. The results presented reveal the essential features of both fully flooded and starved, elliptical, elastohydrodynamic conjunctions for materials of low elastic modulus.

Hamrock, B. J.↗

NASA NTRS1984

Effect of Impact Damage and Open Holes on the Compression Strength of Tough Resin/high Strain Fiber Laminates

Tests to assess the performance of composite structures damaged by impact or containing local discontinuities such as cutouts are discussed. In particular, two plate specimen test configurations which were developed to define the serverity of compression strength reduction are described; one for impact damage and the other open hole specimens. The test technique for impact specimens involves damaging the plate at selected energies, measuring the size of damage by ultrasonic C-scan techniques and measuring the residual strength in a compression load test. Open-hole specimen compression tests are conducted for several different hole diameters and the failure strain and load and mode of failure recorded. The plate specimen used in these tests is designed with length, width, thickness and laminate stiffness to ensure that overall plate buckling is not responsible for initiating failure.

Williams, J. G.↗

NASA NTRS1985

Structural and mechanical design challenges of space shuttle solid rocket boosters separation and recovery subsystems

The design of the space shuttle solid rocket booster (SRB) subsystems for reuse posed some unique and challenging design considerations. The separation of the SRBs from the cluster (orbiter and external tank) at 150,000 ft when the orbiter engines are running at full thrust meant the two SRBs had to have positive separation forces pushing them away. At the same instant, the large attachments that had reacted launch loads of 7.5 million pounds thrust had to be servered. These design considerations dictated the design requirements for the pyrotechnics and separation rocket motors. The recovery and reuse of the two SRBs meant they had to be safely lowered to the ocean, remain afloat, and be owed back to shore. In general, both the pyrotechnic and recovery subsystems have met or exceeded design requirements. In twelve vehicles, there has only been one instance where the pyrotechnic system has failed to function properly.

Woodis, W. R.↗

NASA NTRS1983

Aircraft performance in a JAWS microburst

Attention is given to the detailed features of a servere microburst event, the flight behavior of a 727 airliner in such an event as predicted by a numerical simulation, and several low level wind shear detection and warning concepts. The Joint Airport Weather Studies project data sets are the basis of the numerical simulation. The calculation of meaningful flight paths under varying wind conditions for microburst avoidance is demonstrated.

Frost, W.↗

NASA NTRS1986

Access control and privacy in large distributed systems

Large scale distributed systems consists of workstations, mainframe computers, supercomputers and other types of servers, all connected by a computer network. These systems are being used in a variety of applications including the support of collaborative scientific research. In such an environment, issues of access control and privacy arise. Access control is required for several reasons, including the protection of sensitive resources and cost control. Privacy is also required for similar reasons, including the protection of a researcher's proprietary results. A possible architecture for integrating available computer and communications security technologies into a system that meet these requirements is described. This architecture is meant as a starting point for discussion, rather that the final answer.

Leiner, B. M.↗

NASA NTRS1985

The Leoville (CV3) accretionary breccia

Leoville is a CV3 chondrite that containsn a large variety of inclusion, besides refractory incusions resembling those in Allende, fine-grained, dark inclusions are especially prominent. Some of these are xenoliths of material very similar to CM chondrites in texture, bulk composition, and oxygen isotopes. However, they show an unusually large range in the degree of hydrous alteration. Other dark inclusions are similar to host matrix. The CV3 host of this breccia is similar to other CV chondrites, although less metamorphosed than Allende. It is suggested that Leoville is a typical accretionary breccia whose parent body accreted after the Cm-like material represented by the xenoliths had formed and undergone alteration. After accretion Leoville suffered servere deformation, leading to foliation stronger than in any other chondrite, but the nature of the event that caused this remains unclear.

Kracher, A.↗

NASA NTRS1987

Parallel discrete event simulation: A shared memory approach

With traditional event list techniques, evaluating a detailed discrete event simulation model can often require hours or even days of computation time. Parallel simulation mimics the interacting servers and queues of a real system by assigning each simulated entity to a processor. By eliminating the event list and maintaining only sufficient synchronization to insure causality, parallel simulation can potentially provide speedups that are linear in the number of processors. A set of shared memory experiments is presented using the Chandy-Misra distributed simulation algorithm to simulate networks of queues. Parameters include queueing network topology and routing probabilities, number of processors, and assignment of network nodes to processors. These experiments show that Chandy-Misra distributed simulation is a questionable alternative to sequential simulation of most queueing network models.

Reed, Daniel A.↗

NASA NTRS1986

Access control and privacy in large distributed systems

Leiner, B. M.↗

NASA NTRS1988

Networking and AI systems: Requirements and benefits

The price performance benefits of network systems is well documented. The ability to share expensive resources sold timesharing for mainframes, department clusters of minicomputers, and now local area networks of workstations and servers. In the process, other fundamental system requirements emerged. These have now been generalized with open system requirements for hardware, software, applications and tools. The ability to interconnect a variety of vendor products has led to a specification of interfaces that allow new techniques to extend existing systems for new and exciting applications. As an example of the message passing system, local area networks provide a testbed for many of the issues addressed by future concurrent architectures: synchronization, load balancing, fault tolerance and scalability. Gold Hill has been working with a number of vendors on distributed architectures that range from a network of workstations to a hypercube of microprocessors with distributed memory. Results from early applications are promising both for performance and scalability.

Source record↗

NASA NTRS1988

An architecture for integrating distributed and cooperating knowledge-based Air Force decision aids

MITRE has been developing a Knowledge-Based Battle Management Testbed for evaluating the viability of integrating independently-developed knowledge-based decision aids in the Air Force tactical domain. The primary goal for the testbed architecture is to permit a new system to be added to a testbed with little change to the system's software. Each system that connects to the testbed network declares that it can provide a number of services to other systems. When a system wants to use another system's service, it does not address the server system by name, but instead transmits a request to the testbed network asking for a particular service to be performed. A key component of the testbed architecture is a common database which uses a relational database management system (RDBMS). The RDBMS provides a database update notification service to requesting systems. Normally, each system is expected to monitor data relations of interest to it. Alternatively, a system may broadcast an announcement message to inform other systems that an event of potential interest has occurred. Current research is aimed at dealing with issues resulting from integration efforts, such as dealing with potential mismatches of each system's assumptions about the common database, decentralizing network control, and coordinating multiple agents.

Nugent, Richard O.↗

NASA NTRS1988

Data Transport Subsystem - The SFOC glue

The design and operation of the Data Transport Subsystem (DTS) for the JPL Space Flight Operation Center (SFOC) are described. The SFOC is the ground data system under development to serve interplanetary space probes; in addition to the DTS, it comprises a ground interface facility, a telemetry-input subsystem, data monitor and display facilities, and a digital TV system. DTS links the other subsystems via an ISO OSI presentation layer and an LAN. Here, particular attention is given to the DTS services and service modes (virtual circuit, datagram, and broadcast), the DTS software architecture, the logical-name server, the role of the integrated AI library, and SFOC as a distributed system.

Parr, Stephen J.↗

NASA NTRS1989

Facilitating information transfer in the EOS era

A simple interactive demonstration program has been written in C to allow a user to input data field descriptions as label format. This program generates a full RECFMT (record format) description and the complete transfer syntax description notation (TSDN) file. It is intended that this program be upgraded to operational quality and be made available to users to simplify the description and TSDN file construction task. The total set of capabilities, from the standard formatted data unit packaging of related files and consistent segment structures, through the type definition techniques and the call server, will constitute a unique tool for the systematic transfer of data. This software on each end may be independent, one end from the other. With it available, local software that will be needed to convert user files to and from the canonical interface will be appreciably simplified.

Billingsley, Frederic C.↗