Search NASA⌕ Search

SEARCH · Search NASA

Results for “shock ignition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Axisymmetric Time-Dependent Computations of Expansion Tube Flow

The goal of this work is to add insight about the flow within expansion tubes by using computational fluid dynamics. This is accomplished by comparing the results of axisymmetric numerical simulations with finite-rate chemistry to data from the HYPULSE expansion tube facility which was previously the NASA Langley expansion tube. The numerical simulations begin at the opening of the primary diaphragm and compute the flow throughout the whole facility and, thus, are able to follow and assess the effect of many of the flow features created during operation of the facility. One particular issue that will be investigated is the effect of boundary layer formation in the acceleration tube on the test gas volume and test gas conditions. Both laminar and turbulent boundary layers will be implemented. The effect of momentary shock reflection off the secondary diaphragm will also be investigated. There is concern that such a reflection will stagnate the test gas and create high levels of dissociated molecules. This is particularly important in propulsion experiments where a freestream composition different from flight conditions may influence ignition and burning data. Several different models of diaphragm rupture will be implemented in order to help understand the importance of this issue.

Wilson, Gregory J.↗
NASA NTRS1992

Investigation of starting transients in the thermally choked ram accelerator

An experimental investigation of the starting transients of the thermally choked ram accelerator is presented in this paper. Construction of a highly instrumented tube section and instrumentation inserts provide high resolution experimental pressure, luminosity, and electromagnetic data of the starting transients. Data obtained prior to and following the entrance diaphragm show detailed development of shock systems in both combustible and inert mixtures. With an evacuated launch tube, starting the diffuser is possible at any Mach number above the Kantrowitz Mach number. The detrimental effects and possible solutions of higher launch tube pressures and excessive obturator leakage (blow-by) are discussed. Ignition of a combustible mixture is demonstrated with both perforated and solid obturators. The relative advantages and disadvantages of each are discussed. Data obtained from these starting experiments enhance the understanding of the ram accelerator, as well as assist in the validation of unsteady, chemically reacting CFD codes.

Burnham, E. A.↗
NASA NTRS1962

STABILITY TESTS OF MONOPROPELLANTS EXPOSED TO FLAMES AND RIFLE FIRE

Tests of the stability of several monopropellants under the effects of impact and heat were conducted in order to assess the potential hazard in a propellant storage area from major fires and enemy attack. Hydrazine, hydrazine nitrate solution, n-propyl nitrate, and ethylene oxide were all tested in one-gallon aluminum containers (half of them filled to 25% and half to 95% capacity) by being subjected to oil bonfires and wood bonfires, and 20-mm incendiary, 20mm high explosive incendiary, and .30-caliber rifle fire. Aviation gasoline was tested in the same manner, for comparison. In the bonfire tests, all four monopropellants generally gave explosion intensities equivalent to one another regardless of the type of bonfire (oil or wood) or the amount of liquid in the test container. Occasionally, however, with hydrazine, hydrazine nitrate solution, and n-propyl nitrate, anomalous results occurred: there was either (a) no explosion or (b) an explosion of above average intensity. Ethylene oxide more nearly approximated the behavior of aviation gasoline than did the other monopropellants. In the rifle-fire tests, n-propyl nitrate appeared to be most shock- sensitive since it was exploded by all three types of ammunition. Hydrazine and hydrazine nitrate solution were exploded by the high-explosive ammunition, but not by the incendiary or .30-dber ammunition. Ethylene oxide was not exploded by any of the gunfire, but the liquid was ignited by both incendiary and high-explosive incendiary ammunition.

FIRING↗
DOE OSTI2020

Shock tube and laser absorption study of CO time-histories during combustion of branched alkenes

Combustion experiments of the three isomers of methyl butene compound - 2-methyl-1-butene (2M1B), 2-methyl-2-butene (2M2B), and 3-methyl-1-butene (3M1B), have been carried out in a shock tube using laser absorption technique. Carbon monoxide (CO) time-histories are obtained behind reflected shockwaves over the temperature range of 1350–1630 K near 9.3 atm with stoichiometric mixtures of 0.075% fuel in O2/Ar. Comparative study of CO time-histories reveals different rates of CO formation indicating different ignition delay time of the methyl butene isomers.

09 BIOMASS FUELS↗
NASA NTRS2005

Scramjet Engine Flowpath Development for the Hyper-X Mach 10 Flight Test

The third flight of the Hyper-X Research Vehicle at nearly Mach 10 in November 2004 demonstrated the potential for airbreathing propulsion at hypersonic speeds. The flowpath of the scramjet engine used in the Hyper-X Research Vehicle was developed using computational fluid dynamic based design method in combination with a systematic series of ground tests in the NASA HyPulse Shock Tunnel at conditions duplicating Mach 10 flight. The test model was a true scale height and length of the internal flight engine flowpath that was partial width and truncated fore and aft. Tests were conducted using a mixture of hydrogen augmented with two-percent silane. Silane gas served as an ignition aid during the short duration of the pulse facility tests. The engine inflow values of pressure, temperature, and Mach number were parametrically varied during the ground test entries to broaden the database over the expected uncertainty in the flight conditions. A review of the ground test technique and comparisons of the ground test pressures along with selected data from the third flight are presented.

Rogers, R. C.↗
DOE OSTI2025

High Energy Density Physics of Inertial Confinement Fusion Ablator Materials

The historic December 5, 2022 experiment at Lawrence Livermore National Lab’s (LLNL) National Ignition Facility (NIF) reached fusion energy ignition for the first time. This is the most important scientific breakthrough of the 21st century paves the way to future clean inertial fusion energy (IFE). The diamond (high density carbon (HDC)) ablator material used in this experiment displays detrimental effects due to the development of hydrodynamic instabilities at the diamond/fuel interface under shock compression. New alternatives to diamond ablators are required to step up the energy yield in ICF experiments. The unique combination of mechanical strength (approaching that of diamond), the ability to accommodate high-Z dopants (in contrast to diamond), and the tunability of the properties (through synthesis material with varying sp 3 content) make amorphous carbon (a-C) a promising material for next-generation IFE ablative capsules. However, despite its critical importance to the IFE program, the behavior of a-C carbon at extreme temperatures and pressures remains largely unexplored. The primary goals of this project were to perform groundbreaking dynamic compression experiments and predictive simulations to uncover the fundamental high-energy-density physics of amorphous carbon. Our goals were (1) to uncover the metastability range of amorphous carbon and probe phase transitions to diamond or metastable supercooled liquid carbon; (2) to acquire high-quality equation of state (EOS) data and develop an experimentally validated EOS from machine-learning MD simulations of the complex states of carbon; and (3) to uncover the complex behavior of carbon liquid in both thermodynamically stable and metastable supercooled states by accessing large areas of carbon phase diagram with amorphous samples with variable sp 3 content. Our proposed experimental program included measurements of equation of state and diffraction measurements using the Omega EP laser at the Laboratory of Laser Energetics at the University of Rochester. The theoretical/simulation program involved the development of machine-learning models of the complex response of amorphous carbon under dynamic compression by performing molecular dynamics simulations at experimental time and length scales using leadership class DOE supercomputers. Simulations guided experiments to observe predicted phenomena and acquire critical experimental data in specific pressure-temperature domains to validate theoretical models. This research delivered fundamental properties of novel amorphous carbon IFE ablator material, including phase diagram and EOS. These results will aid in IFE target design and implosion experiments. A unique combination of predictive simulations and dynamic and static experiments provided a highly inspirational intellectual environment for graduate students and postdocs involved in this project.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2005

Scramjet Development Tests Supporting the Mach 10 Flight of the X-43

The Hyper-X Project s successful third flight of the X-43 at near Mach 10 in 2004 proved the potential for airbreathing propulsion at hypersonic speeds. The engine flowpath used in the X-43 research vehicle was developed and evaluated in a systematic series of ground tests in the NASA HyPulse Shock Tunnel at conditions duplicating Mach 10 flight using a full scale height, partial width engine model of the flight engine. Tests were conducted over a range of equivalence ratios from 0.8 to 1.6 using hydrogen and a mixture of two-percent silane in hydrogen fuels. Silane gas was used as an ignition aid during the short duration of the pulse facility tests. Variation of the engine inflow conditions, pressure, temperature, and Mach number, were parametrically varied during the test entries to broaden the database over the expected uncertainty in the flight conditions. A review of the ground test technique and comparisons of the ground test pressures along with selected flight data are presented.

Rogers, R. C.↗
NASA NTRS2016

Effect of Stagger on the Vibroacoustic Loads from Clustered Rockets

The effect of stagger startup on the vibro-acoustic loads that form during the end- effects-regime of clustered rockets is studied using both full-scale (hot-gas) and laboratory scale (cold gas) data. Both configurations comprise three nozzles with thrust optimized parabolic contours that undergo free shock separated flow and restricted shock separated flow as well as an end-effects regime prior to flowing full. Acoustic pressure waveforms recorded at the base of the nozzle clusters are analyzed using various statistical metrics as well as time-frequency analysis. The findings reveal a significant reduction in end- effects-regime loads when engine ignition is staggered. However, regardless of stagger, both the skewness and kurtosis of the acoustic pressure time derivative elevate to the same levels during the end-effects-regime event thereby demonstrating the intermittence and impulsiveness of the acoustic waveforms that form during engine startup.

Rojo, Raymundo↗
NASA NTRS2010

Computation of Unsteady Flow in Flame Trench For Prediction of Ignition Overpressure Waves

Computational processes/issues for supporting mission tasks are discussed using an example from launch environment simulation. Entire CFD process has been discussed using an existing code; STS-124 conditions were revisited to support wall repair effort for STS-125 flight; when water bags were not included, computed results indicate that IOP waves with the peak values have been reflected from SRB s own exhaust hole; ARES-1X simulations show that there is a shock wave going through the unused exhaust hole, however, it plays a secondary role; all three ARES-1X cases and STS-1 simulations showed very similar IOP magnitudes and patters on the vehicle; with the addition of water bags and water injection, it will further diminish the IOP effects.

Kwak, Dochan↗
NASA NTRS1979

Symposium /International/ on Combustion, 17th, Leeds University, Leeds, England, August 20-25, 1978, Proceedings

The Symposium focused on deflagration to detonation transition, coal combustion, turbulent-combustion interactions, kinetics, furnace combustion, inhibition and ignition, flame structure and chemistry, combustion studies, measurement techniques, fire and explosion, engine combustion, soot, and propellants and explosives. Papers were presented on numerical modeling of the deflagration-to-detonation transition, the interaction between turbulence and combustion, turbulent flame propagation in premixed gases, spray evaporation in recirculating flow, dissociation of nitric oxide in shock waves, pollutant emissions from partially mixed turbulent flames, energy transfer and quenching rates of laser-pumped electronically excited alkalis in flames, a study of flammability limits using counterflow flames, the unified theory of explosions with fuel consumption, and the dynamics and radiant intensity of large hydrogen flames.

Source record↗
DOE OSTI2021

Fuel convergence sensitivity in indirect drive implosions

In inertial confinement fusion experiments at the National Ignition Facility, a spherical shell of deuterium–tritium fuel is imploded in an attempt to reach the conditions needed for fusion, self-heating, and eventual ignition. Since theory and simulations indicate that ignition efficacy in 1D improves with increasing imploded fuel convergence ratio, it is useful to understand the sensitivity of the scale-invariant fuel convergence on all measurable or inferable 1D parameters. In this paper, we develop a simple isobaric and isentropic compression scaling model incorporating sensitivity to the in-flight adiabat inferred from shock strengths, to measured implosion velocity, and to known initial ablator and fuel aspect ratio and mass ratio. The model is first benchmarked to 1D implosion simulations spanning a variety of relevant implosion designs. We then use the model to compare compressibility trends across all existing indirect-drive layered implosion data from the facility spanning three ablators [CH, carbon (C), and Be], for which in-flight fuel adiabats varied from 1.6 to 5 by varying the number of drive shocks from 2 to 4, peak implosion velocities varied by 1.4×, capsule radii by 50%, and initial fuel aspect ratios by 1.4×. We find that the strength of the first shock is the dominant contributor setting the maximum fuel convergence. We also observe additional sensitivities to successive shock strengths and fuel aspect ratios that improve the agreement between the expected and measured compression for carbon and Be designs with adiabats above 3. A principal finding is that the adiabat 2.5 C-shell designs exhibit less convergence than CH-shell designs of similar inferred in-flight adiabat.

Landen, O. L. (ORCID:0000000214998217)↗
DOE OSTI2020

Development of a high temperature pyrolysis mechanism for cyclopentanone, a potential biofuel derived from biomass

Cyclopentanone (CPO) is a promising biofuel for spark-ignition engines due to its ring strain and high auto-ignition resistance. The Department of Energy has identified CPO as a potential biofuel candidate because of its unique chemical properties. Understanding CPO decomposition is crucial to building a high-temperature combustion model. In this study, we present a comprehensive kinetic model for high-temperature pyrolysis of CPO with verified results from high-pressure shock tube (HPST) measurements. The time histories of carbon monoxide (CO), ethylene (C2H4), and CPO absorbances over the temperature range of 1156-1416 K and 8.53-10.06 atm were measured. A corresponding kinetic model was generated using the Reaction Mechanism Generator (RMG) with the parameters of dominant pathways from either previous studies or quantum calculation within current work. The final model containing 821 species and 79,859 reactions exhibited a good agreement with the experimental results. In this study, the C2H4/CO ratio was used as an essential factor to validate the model and to prove that radical-involved bimolecular pathways were as significant as unimolecular decomposition of CPO. The rate of production (ROP) analysis showed that H radicals play major roles in both primary reactions and product pyrolysis. The insights from this work can be used to generate a better CPO combustion model and help evaluate CPO as a biofuel. Such understanding can also be helpful when proposing pyrolysis or combustion models for other biofuels.

cyclopentanone, reaction mechanism, pyrolysis, sho↗
DOE OSTI2023

Improved ion heating in fast ignition by pulse shaping

The fast ignition paradigm for inertial fusion offers increased gain and tolerance of asymmetry by compressing fuel at low entropy and then quickly igniting a small region. Because this hotspot rapidly disassembles, the ions must be heated to ignition temperature as quickly as possible, but most ignitor designs directly heat electrons. A constant-power ignitor pulse, which is generally assumed, is suboptimal for coupling energy from electrons to ions. Using a simple model of a hotspot in isochoric plasma, a novel pulse shape to maximize ion heating is presented in analytical form. Bounds are derived on the maximum ion temperature attainable by electron heating only. Moreover, arranging for faster ion heating allows a smaller hotspot, improving fusion gain. As a result, under representative conditions, the optimized pulse can reduce ignition energy by over 20%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1994

Miniature laser ignited bellows motor

A miniature optically ignited actuation device has been demonstrated using a laser diode as an ignition source. This pyrotechnic driven motor provides between 4 and 6 lbs of linear force across a 0.090 inch diameter surface. The physical envelope of the device is 1/2 inch long and 1/8 inch diameter. This unique application of optical energy can be used as a mechanical link in optical arming systems or other applications where low shock actuation is desired and space is limited. An analysis was performed to determine pyrotechnic materials suitable to actuate a bellows device constructed of aluminum or stainless steel. The aluminum bellows was chosen for further development and several candidate pyrotechnics were evaluated. The velocity profile and delivered force were quantified using an non-intrusive optical motion sensor.

Renfro, Steven L.↗
DOE OSTI2023

The dynamics, mixing, and thermonuclear burn of compressed foams with varied gas fills

Inertial confinement fusion (ICF) implosions involve highly coupled physics and complex hydrodynamics that are challenging to model computationally. Due to the sensitivity of such implosions to small features, detailed simulations require accurate accounting of the geometry and dimensionality of the initial conditions, including capsule defects and engineering features such as fill tubes used to insert gas into the capsule, yet this is computationally prohibitive. It is therefore difficult to evaluate whether discrepancies between the simulation and experiment arise from inadequate fidelity to the capsule geometry and drive conditions, uncertainties in physical data used by simulations, or inadequate physics. We present results from detailed high-resolution three-dimensional simulations of ICF implosions performed as part of the MARBLE campaign on the National Ignition Facility [Albright et al., Phys. Plasmas 29, 022702 (2022)]. These experiments are foam-filled separated-reactant experiments, where deuterons reside in the foam and tritons reside in the capsule gas fill and deuterium–tritium (DT) fusion reactions only occur in the presence of mixing between these materials. Material mixing in these experiments is primarily seeded by shock interaction with the complex geometry of the foam and gas fill, which induces the Richtmyer–Meshkov instability. We compare results for experiments with two different gas fills (ArT and HT), which lead to significant differences in the hydrodynamic and thermodynamic developments of the materials in the implosion. Our simulation results show generally good agreement with experiments and demonstrate a substantial impact of hydrodynamic flows on measured ion temperatures. The results suggest that viscosity, which was not included in our simulations, is the most important unmodeled physics and qualitatively explains the few discrepancies between the simulation and experiment. The results also suggest that the hydrodynamic treatment of shocks is inadequate to predict the heating and yield produced during shock flash, when the shock converges at the center of the implosion. Alternatively, underestimation of the level of radiative preheat from the shock front could explain many of the differences between the experiment and simulation. Nevertheless, simulations are able to reproduce many experimental observables within the level of experimental reproducibility, including most yields, time-resolved X-ray self-emission images, and an increase in burn-weighted ion temperature and neutron down-scattered ratio in the line of sight that includes a jet seeded by the glue spot that joins capsule hemispheres.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Violent mergers can explain the inflated state of some of the fastest stars in the Galaxy

A significant number of hypervelocity stars with velocities between 1500 − 2500 km s −1 have recently been observed. The only plausible explanation so far is that they were produced through thermonuclear supernovae in white dwarf binaries. Since these stars are thought to be surviving donors of Type Ia supernovae, a surprising finding was that these stars are inflated, with radii an order of magnitude higher than expected for Roche-lobe-filling donors. Recent attempts at explaining them have combined 3D hydrodynamical supernova explosion simulations with 1D stellar modelling to explain the impact of supernova shocks on runaway white dwarfs. However, only the hottest and most compact of those runaway stars can so far marginally be reproduced by detailed models of runaways from supernova explosions. In this and a companion paper, we introduce a new AREPO simulation of two massive CO white dwarfs that explode via a violent merger. During the merger, the primary white dwarf ignites when the secondary is on its last orbit and plunging towards the primary. In the corresponding aftermath, the core of the secondary white dwarf of 0.16 M ⊙ remains bound, moving at a velocity of ∼2800 km s −1 . We mapped this object into MESA and show that this runaway star can explain the observations of two hypervelocity stars that were dubbed D6-1 and D6-3 based on their original discovery motivated by the D6 scenario, though the violent merger scenario presented here is somewhat distinct from the D6 scenario.

Astronomy and AstroPhysics↗
NASA NTRS2014

Aeroacoustics of Space Vehicles

While for airplanes the subject of aeroacoustics is associated with community noise, for space vehicles it is associated with vibro-acoustics and structural dynamics. Surface pressure fluctuations encountered during launch and travel through lower part of the atmosphere create intense vibro-acoustics environment for the payload, electronics, navigational equipment, and a large number of subsystems. All of these components have to be designed and tested for flight-certification. This presentation will cover all three major sources encountered in manned and unmanned space vehicles: launch acoustics, ascent acoustics and abort acoustics. Launch pads employ elaborate acoustic suppression systems to mitigate the ignition pressure waves and rocket plume generated noise during the early part of the liftoff. Recently we have used large microphone arrays to identify the noise sources during liftoff and found that the standard model by Eldred and Jones (NASA SP-8072) to be grossly inadequate. As the vehicle speeds up and reaches transonic speed in relatively denser part of the atmosphere, various shock waves and flow separation events create unsteady pressure fluctuations that can lead to high vibration environment, and occasional coupling with the structural modes, which may lead to buffet. Examples of wind tunnel tests and computational simulations to optimize the outer mold line to quantify and reduce the surface pressure fluctuations will be presented. Finally, a manned space vehicle needs to be designed for crew safety during malfunctioning of the primary rocket vehicle. This brings the subject of acoustic environment during abort. For NASAs Multi-Purpose Crew Vehicle (MPCV), abort will be performed by lighting rocket motors atop the crew module. The severe aeroacoustics environments during various abort scenarios were measured for the first time by using hot helium to simulate rocket plumes in the Ames unitary plan wind tunnels. Various considerations used for the helium simulation and the final confirmation from a flight test will be presented.

launch vehicle↗
DOE OSTI2020

Plasma Electrolytic Oxidation (PEO) Coatings as Superior Thermal Barriers for Engine Pistons. Final Report

Thermal barrier coatings (TBCs) have received considerable interest in internal combustion engines, as a means to increase overall efficiency. However, despite some promising results for coatings with adequate thermal properties, durability has remained a barrier to commercialization, which has damped interest from automotive manufacturers. The PEO-based TBC developed by IBC Materials has exceptional durability, and thermal properties comparable or superior to state of the art. In this Phase I effort, IBC has demonstrated this durability by coating pistons from a current production engine (Kohler KD440) and conducting thermal shock testing on several coated pistons. Following successful thermal shock testing, a piston was run in this engine for an extended period(>120h) and showed no evidence of damage to the piston coating or engine bore. The PEO-based TBC also increased heat rejection from the combustion chamber, resulting in significantly increased exhaust temperature. Operation of the engine with PEO-based TBCs was also found to delay the onset of fuel ignition, possibly due to reduced heat retention by the piston. After slightly modifying the engine operation to counteract this effect, a modest improvement (+0.8%) to overall efficiency was achieved. With additional tuning of coating parameters and combustion timing, it is very likely that additional gains can be realized. This result also points to the possibility of future designs which require less capacity from the cooling system (e.g. a radiator), which draws energy and adds mass and complexity to an overall powertrain.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗