Results for “small target” — Page 16

DOE OSTI2020

Conversion, Stability, and Selectivity Improvements Through Catalyst Development for the Reductive Etherification Reaction

Economical pathways from lignocellulosic non-food biomass feedstocks to biofuels with appropriate fuel properties are necessary for displacing fossil-fuel derived diesel use in medium-/heavy duty vehicles. Oxygenated compounds have recently shown promise due to low sooting tendencies and autoignition properties and molecules with sufficiently high carbon numbers can meet the requisite standards for water solubility and flash point. Coupling waste biomass derived small molecules into bioblendstock targets through the reductive etherification reaction shows potential for increasing molecular weight without losing the advantages of oxygenates. However, the transition to industrial viability for this process is limited by strong catalyst deactivation in typical flow reactor systems. Strong acid resins such as Amberlyst-15 (A-15) show excellent activity in batch reactions but are limited to low temperatures and are poisoned by the side-product, water. In this talk, I will describe our recent work in catalyst synthesis and testing to select superior options with improved aqueous and thermal stability in reductive etherification flow reactions. Water-tolerant solid acid catalysts have potential to improve the conversion and selectivity to the ether target at temperatures above the degradation point of A-15. Analysis techniques such as physisorption, chemisorption, x-ray diffraction and transmission electron microscopy are being used to characterize the active sites. These techniques are also being used to evaluate degradation of the catalyst after extensive flow reactions in addition to comparative efficiency testing with standardized cyclohexene hydrogenation reactions. Finally, I will discuss a demonstration of the full pathway from bio-derived butyric acid to the performance-advantaged ether product and the additional obstacles from side-products and purification limitations in the preliminary upgrading reactions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2020

Chromatin activity precipitation method and system

Methods and systems for identifying binding sites in macromolecules using small molecule mimics of naturally occurring molecules is disclosed. A reactive probe is provided that mimics small molecule cofactors. A target macromolecule is irreversibly bound to the probe in vivo to selectively pull down or precipitate probe-bound macromolecules. The macromolecules may be, but are not limited to, DNA, RNA, and proteins.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

SMR Current Status: Development Needs and Global Perspectives

Defined as nuclear reactors with a power output up to 300 megawatts electrical (MWe) by the International Atomic Energy Agency (IAEA) and targeted for multipurpose applications, small modular reactors (SMRs) have been recognized as a very promising, clean, affordable, and sustainable energy source by many countries. At present, more than 80 SMRs are under design, development, demonstration, deployment, and beyond (4D+) phases worldwide. This study focuses on the current world status of SMRs and focuses on the necessary developments to accelerate the process of adopting SMRs as a major energy source globally. SMRs are not a new concept, but they do represent a new vision for older concepts if the challenges inherent within them are mitigated with strategic and realistic solution approaches. The major challenges for SMRs 4D+ like any new reactors are: (a) qualifying the advanced fuel-to-reactor design; (b) supporting rapid scaled/prototypic experimentations; (c) maintaining local and global codes, standards, and licensing; (d) supply chain issues;(e) effective cradle-to-grave nuclear fuel cycle and fuel material transportation, and (f) mitigating financial and environmental risks. These upfront challenges can be mitigated with a synergistic solution approach among the various stakeholders: industry, academia, research, government, and international entities.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2024

Investigating Electro-Nuclear Interactions in a New Dark Matter Search

Electro-nuclear (EN) interactions are interactions in which an incident electron collides with a nucleus, scattering the electron and creating byproduct particles. Such interactions are of interest to neutrino physicists, who use EN interactions to inform model building of neutrino-nucleus interactions. The Light Dark Matter Experiment (LDMX) is a small-scale, fixed-target, electron beam experiment which seeks to probe for dark matter and mediator particle production in the sub-GeV mass region. The 8GeV LDMX electron beam will serve as an opportunity to study electro-nuclear interactions in final states in the multi-GeV region. LDMX s missing energy trigger for dark matter interactions however, will not be sufficient to efficiently capture EN interactions. An additional trigger is needed. Using simulated events, that included background and EN interactions, a trigger on momentum was developed.

Croteau, Beatrice↗

DOE OSTI2024

Presentation: SMR Current Status: Development Needs and Global Perspectives

Defined as nuclear reactors with a power output up to 300 megawatts electrical (MWe) by the International Atomic Energy Agency (IAEA) and targeted for multipurpose applications, small modular reactors (SMRs) have been recognized as a very promising, clean, affordable, and sustainable energy source by many countries. At present, more than 80 SMRs are under design, development, demonstration, deployment, and beyond (4D+) phases worldwide. This paper focuses on the current world status of SMRs and focuses on the necessary developments to accelerate the process of adopting SMRs as a major energy source globally. SMRs are not a new concept, but they do represent a new vision for older concepts if the challenges inherent within them are mitigated with strategic and realistic solution approaches. The major challenges for SMRs 4D+ like any new reactors are: (a) qualifying the advanced fuel-to-reactor design; (b) supporting rapid scaled/prototypic experimentations; (c) maintaining local and global codes, standards, and licensing; (d) supply chain issues; (e) effective cradle-to-grave nuclear fuel cycle and fuel material transportation, and (f) mitigating financial and environmental risks. These upfront challenges can be mitigated with a synergistic solution approach among the various stakeholders: industry, academia, research, government, and international entities.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2024

SMR Current Status: Development Needs and Global Perspectives

Defined as nuclear reactors with a power output up to 300 megawatts electrical (MWe) by the International Atomic Energy Agency (IAEA) and targeted for multipurpose applications, small modular reactors (SMRs) have been recognized as a very promising, clean, affordable, and sustainable energy source by many countries. At present, more than 80 SMRs are under design, development, demonstration, deployment, and beyond (4D+) phases worldwide. This study focuses on the current world status of SMRs and focuses on the necessary developments to accelerate the process of adopting SMRs as a major energy source globally. SMRs are not a new concept, but they do represent a new vision for older concepts if the challenges inherent within them are mitigated with strategic and realistic solution approaches. The major challenges for SMRs 4D+ like any new reactors are: (a) qualifying the advanced fuel-to-reactor design; (b) supporting rapid scaled/prototypic experimentations; (c) maintaining local and global codes, standards, and licensing; (d) supply chain issues;(e) effective cradle-to-grave nuclear fuel cycle and fuel material transportation, and (f) mitigating financial and environmental risks. These upfront challenges can be mitigated with a synergistic solution approach among the various stakeholders: industry, academia, research, government, and international entities.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2022

Deployment of the HFIRCON transport and depletion tool for plutonium-238 production studies

Irradiation of {sup 237}Np-bearing targets in Oak Ridge National Laboratory's (ORNL) High Flux Isotope Reactor (HFIR) results in the efficient production of {sup 238}Pu, which, in the form of heat source PuO{sub 2}, is used as a reliable power source for deep-space and planetary NASA missions. A technology demonstration subproject was initiated at ORNL in 2011 to develop and implement the technology required to establish a {sup 238}Pu supply chain. A systematic progression of NpO{sub 2}/Al cermet (20 vol.% NpO{sub 2}) activities to date has successfully demonstrated target fabrication, irradiation, and chemical recovery processes. Recent program tasks have included the development of the HFIRCON transport and depletion tool for efficient reactor physics analyses and the evaluation of increased NpO{sub 2} loadings (i.e., beyond 20 vol.%) and NpN-based targets. This paper documents the deployment of the HFIRCON code to assess various Np concentrations in NpO{sub 2}- and NpN-based targets in HFIR's inner small vertical experiment facilities. Results indicate that {sup 238}Pu production and quality can be enhanced with increased Np loadings; however, target conversion rates are reduced. The results recorded in this paper, thermal and material balance evaluations, and testing requirement planning will be used to determine whether increased NpO{sub 2} loadings or NpN-based targets will be further considered. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

NASA NTRS1975

A remote sensing laser fluorometer

A sensor is reported which is able to identify certain specific substances in water by means of their fluorescence spectra. In particular, the sensor detects oil, ligninsulfonates and chlorophyll. The device is able to measure the fluorescence spectra of water at ranges up to 75 m and to detect oil spills on water at altitudes up to 300 m. Blue light from a laser is used to excite the fluorescence of the target. Any light from the ambient background illumination, from the reflected laser light or from the induced fluorescence is gathered by a small telescope focused on the target. Optical filters are used to block the reflected laser light and to select the wavelengths of interest in the fluorescence spectrum of the target. The remaining light is detected with a photomultiplier tube. The amplitude of the laser induced fluorescence in the wavelength interval selected by the optical filters is displayed on a meter or strip chart recorder.

Oneill, R. A.↗

NASA NTRS1982

SAR imaging - Seeing the unseen

The functional abilities and operations of synthetic aperture radar (SAR) are described. SAR employs long wavelength radio waves in bursts, imaging a target by 'listening' to the small frequency changes that result from the Doppler shift due to the relative motion of the imaging craft and the motions of the target. The time delay of the signal return allows a determination of the location of the target, leading to the build up of a two-dimensional image. The uses of both Doppler shifts and time delay enable detailed imagery which is independent of distance. The synthetic aperture part of the name of SAR derives from the beaming of multiple pulses, which result in a picture that is effectively the same as using a large antenna. Mechanisms contributing to the fineness of SAR images are outlined.

Kobrick, M.↗

DOE OSTI2023

Remote Sensing Low Signal-to-Noise-Ratio Target Detection Enhancement

In real-time remote sensing application, frames of data are continuously flowing into the processing system. The capability of detecting objects of interest and tracking them as they move is crucial to many critical surveillance and monitoring missions. Detecting small objects using remote sensors is an ongoing, challenging problem. Since object(s) are located far away from the sensor, the target’s Signal-to-Noise-Ratio (SNR) is low. The Limit of Detection (LOD) for remote sensors is bounded by what is observable on each image frame. In this paper, we present a new method, a “Multi-frame Moving Object Detection System (MMODS)”, to detect small, low SNR objects that are beyond what a human can observe in a single video frame. This is demonstrated by using simulated data where our technology-detected objects are as small as one pixel with a targeted SNR, close to 1:1. We also demonstrate a similar improvement using live data collected with a remote camera. The MMODS technology fills a major technology gap in remote sensing surveillance applications for small target detection. Our method does not require prior knowledge about the environment, pre-labeled targets, or training data to effectively detect and track slow- and fast-moving targets, regardless of the size or the distance.

47 OTHER INSTRUMENTATION↗

NASA NTRS2016

Demonstration of Mars Crosslink Occultation Measurements for Future Small Spacecraft Constellations

Future planetary atmospheric profiling via radio occultations (RO) benefits significantly from increased received signal-to-noise ratio as well as geometrical coverage of links between two or more spacecraft in orbit around a target planet. These can be small spacecraft, possibly dedicated to quality radio-metrics with precision clock reference. Motivated by long-term research investigating the optimum SNR for the science performance, the optimum reference clock stability, the number and combination of wavelengths driving the number of transmitters and antennas, the optimum number and orbital spacecraft configuration, and design modifications to existing radio communication systems that would allow these new science objectives on future missions, three crosslink occultation experiments have been acquired between the Mars Odyssey and Mars Reconnaissance Orbiter spacecraft to probe the Martian atmosphere. While crosslink occultations between Earth orbiting satellites have long been used to profile the Earth’s atmosphere, this represents the first demonstration of crosslink occultation measurements at another planet. These measurements leverage the proximity link telecommunication payloads on each orbiter, which were designed to provide relay communication and navigation services to Mars landers and rovers. Analysis of the observed Doppler shift on each crosslink measurement reveals a clear signature of the Martian atmosphere, primarily the ionosphere. Inversion of the observed Doppler data yields vertical profiles of the Martian refractivity and electron density. The electron density profiles show the presence of two layers with peak densities and peak heights that are consistent with empirical models.

Asmar, Sami↗

DOE OSTI2022

Operation of an Energy Recovery Linac with an Internal Target

Because an Energy Recovery Linac (ERL) decelerates and dumps the beam after at most a few passes, beam degradation in the interaction region that is orders of magnitude larger than in a storage ring is tolerable in such a device. As a consequence, some new types of Nuclear Physics experiments can be carried out. In 2016, an experiment (the DarkLight experiment) was installed in the Jefferson Lab FEL Driver ERL to test out this idea. The ERL had previously been used for FEL applications where high peak current and a large growth in energy spread was present. For the internal target, the machine setup required very small energy spread, and had to deal with large transverse emittance growth in the target. Additionally, the addition of a strong solenoid in the transport complicated the details of energy recovery. This presentation will describe how these new machine physics challenges were addressed.

Benson, S. V.↗

NASA NTRS2024

A Method of Compliance for Achieving Target Collision Risk in UTM Operations

This work proposes a method of compliance to ensure that the collision risks among small unmanned aircraft systems meet the target level of safety. This method presents what is needed for a strategic conflict detection service to achieve the target level of safety when conflict between operational intents are not permitted in nominal situations. A volume-based collision risk model is first developed to calculate the UA-to-UA collision risk given any two operational intent volumes. With this collision risk model, a test strategy is then proposed to assess if a strategic conflict detection service can reduce the collision risk and meet the target level of safety. The method also specifies operational data that are required to be collected to verify if requirements on conformance are being met. Additionally, two new requirements are identified and proposed by this method beyond the current standard for strategic conflict detection. In the sensitivity analysis, three main factors contributing to the collision risk are investigated. The analysis shows that buffers should be considered in a strategic conflict detection service when deconflicting operational intents. The results also reveal that the selection of test cases plays an important role in evaluating the strategic conflict detection service, and they should be representative and sufficiently complex in evaluation tests.

Collision Risk↗

NASA NTRSDate not supplied

A Method of Compliance for Achieving Target Collision Risk in UTM Operations

This work proposes a method of compliance to ensure that the collision risks among small unmanned aircraft systems meet the target level of safety. This method presents what is needed for a strategic conflict detection service to achieve the target level of safety when conflict between operational intents are not permitted in nominal situations. A volume-based collision risk model is first developed to calculate the UA-to-UA collision risk given any two operational intent volumes. With this collision risk model, a test strategy is then proposed to assess if a strategic conflict detection service can reduce the collision risk and meet the target level of safety. The method also specifies operational data that are required to be collected to verify if requirements on conformance are being met. Additionally, two new requirements are identified and proposed by this method beyond the current standard for strategic conflict detection. In the sensitivity analysis, three main factors contributing to the collision risk are investigated. The analysis shows that buffers should be considered in a strategic conflict detection service when deconflicting operational intents. The results also reveal that the selection of test cases plays an important role in evaluating the strategic conflict detection service, and they should be representative and sufficiently complex in evaluation tests.

UTM, Method of Compliance, collision risk↗

NASA NTRSDate not supplied

A Method of Compliance for Achieving Target Collision Risk in UTM Operations

This work proposes a method of compliance to ensure that the collision risks among small unmanned aircraft systems meet the target level of safety. This method presents what is needed for a strategic conflict detection service to achieve the target level of safety when conflict between operational intents are not permitted in nominal situations. A volume-based collision risk model is first developed to calculate the UA-to-UA collision risk given any two operational intent volumes. With this collision risk model, a test strategy is then proposed to assess if a strategic conflict detection service can reduce the collision risk and meet the target level of safety. The method also specifies operational data that are required to be collected to verify if requirements on conformance are being met. Additionally, two new requirements are identified and proposed by this method beyond the current standard for strategic conflict detection. In the sensitivity analysis, three main factors contributing to the collision risk are investigated. The analysis shows that buffers should be considered in a strategic conflict detection service when deconflicting operational intents. The results also reveal that the selection of test cases plays an important role in evaluating the strategic conflict detection service, and they should be representative and sufficiently complex in evaluation tests.

UTM↗

NASA NTRS2005

Preliminary results from an airborne experiment using along-track interferometry for ground moving target indication

Synthetic aperture radar (SAR) along track interferometry (ATI) has been used extensively to measure ocean surface currents. Given its ability to measure small velocities of relatively radar-dark water surfaces, there is great potential that this technique can be adapted for ground moving target indication (GMTI) applications, particularly as a method for detecting very slwo targets with small radar cross sections. In this paper we describe preliminary results from an ATI GMTI experiment.

ground moving target indication↗

NASA NTRSDate not supplied

Protecting Our Home Planet With SmallSats

This presentation provides an overview the US National Aeronautics and Space Administration (NASA) Science Mission Directorate’s (SMD’s) Small Satellite missions that protect and improve life on earth and in space. In recent years, Small Satellites offer a path to new types of observations for Earth and space science. NASA recognizes the value and impact of Small Satellites, from CubeSats to ESPA-class satellites, for high-value science missions to support exploration through innovative technologies. With smaller size, lower cost, more rapid solicitation, and with constellation missions, our Small Satellite missions can perform targeted science, prove out new technologies, increase our science capabilities to add to our understanding of how we can improve life on earth and in space. Our Small Satellites missions have produced synchronic, high spatial, and temporal science measurements to our changing earth, demonstrating that such missions must be part of our platforms for unique science measurements. We are also able to educate and train the next generation of scientists and engineers by means of these high-risk lower-cost missions.

SmallSats↗

DOE OSTI2023

Revealing protonation states and tracking substrate in serine hydroxymethyltransferase with room-temperature X-ray and neutron crystallography

Pyridoxal 5’-phosphate (PLP)-dependent enzymes utilize a vitamin B 6 -derived cofactor to perform a myriad of chemical transformations on amino acids and other small molecules. Some PLP-dependent enzymes, such as serine hydroxymethyltransferase (SHMT), are promising drug targets for the design of small-molecule antimicrobials and anticancer therapeutics, while others have been used to synthesize pharmaceutical building blocks. Understanding PLP-dependent catalysis and the reaction specificity is crucial to advance structure-assisted drug design and enzyme engineering. Here we report the direct determination of the protonation states in the active site of Thermus thermophilus SHMT (TthSHMT) in the internal aldimine state using room-temperature joint X-ray/neutron crystallography. Conserved active site architecture of the model enzyme TthSHMT and of human mitochondrial SHMT (hSHMT2) were compared by obtaining a room-temperature X-ray structure of hSHMT2, suggesting identical protonation states in the human enzyme. The amino acid substrate serine pathway through the TthSHMT active site cavity was tracked, revealing the peripheral and cationic binding sites that correspond to the pre-Michaelis and pseudo-Michaelis complexes, respectively. At the peripheral binding site, the substrate is bound in the zwitterionic form. By analyzing the observed protonation states, Glu53, but not His residues, is proposed as the general base catalyst, orchestrating the retro-aldol transformation of L-serine into glycine.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗