Search NASA⌕ Search

SEARCH · Search NASA

Results for “source strength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Noise Radiation from a Continuous Mold-Line Link Flap Configuration

The results of an experimental study of the noise from a Continuous Mold-Line Link (CML) flap are presented. Acoustic and unsteady surface pressure measurements were performed on a main element wing section with a half-span CML flap in NASA Langley s Quiet Flow Facility. The acoustic data were acquired with a medium aperture directional array (MADA) of microphones. The Deconvolution Approach for the Mapping of Acoustic Sources (DAMAS) method is applied to determine the spatial distribution and strength of the noise sources over the surface of the test model. A Coherent Output Power (COP) method which relates the output from unsteady surface pressure sensors to the output of the MADA is also used to obtain more detailed characteristics of the noise source distribution in the trailing edge region of the CML. These results are compared to those obtained for a blunt flap to quantify the level of noise benefit that is achieved with the CML flap. The results indicate that the noise from the CML region of the flap is 5 to 17 dB lower (depending on flap deflection and Mach number) than the noise from the side edge region of the blunt flap. Lower noise levels are obtained for all frequencies. Spectral analysis of the noise from the cove region of the CML and blunt flap models also reveal a spectral peak in the high frequency range that is related to noise scattering at the trailing edge of the main element. The peaks in the CML and blunt flap cove noise spectra are close in level and often exceed blunt side edge noise. Applying a strip of serrated tape to the trailing edge of the CML flap model main airfoil, reduced the peak but increased other noise somewhat. Directivity measurements show that the CML flap can be more directional than the blunt flap.

Hutcheson, Florence V.↗
NASA NTRS2011

Noise Radiation from a Continuous Mold-Line Link Flap Configuration

The results of an experimental study of the noise from a Continuous Mold-Line Link (CML) flap are presented. Acoustic and unsteady surface pressure measurements were performed on a main element wing section with a half-span CML flap in NASA Langley s Quiet Flow Facility. The acoustic data were acquired with a medium aperture directional array (MADA) of microphones. The Deconvolution Approach for the Mapping of Acoustic Sources (DAMAS) method is applied to determine the spatial distribution and strength of the noise sources over the surface of the test model. A Coherent Output Power (COP) method which relates the output from unsteady surface pressure sensors to the output of the MADA is also used to obtain more detailed characteristics of the noise source distribution in the trailing edge region of the CML. These results are compared to those obtained for a blunt flap to quantify the level of noise benefit that is achieved with the CML flap. The results indicate that the noise from the CML region of the flap is 5 to 17 dB lower (depending on flap deflection and Mach number) than the noise from the side edge region of the blunt flap. Lower noise levels are obtained for all frequencies. Spectral analysis of the noise from the cove region of the CML and blunt flap models also reveal a spectral peak in the high frequency range that is related to noise scattering at the trailing edge of the main element. The peaks in the CML and blunt flap cove noise spectra are close in level and often exceed blunt side edge noise. Applying a strip of serrated tape to the trailing edge of the CML flap model main airfoil reduced the peak but increased other noise somewhat. Directivity measurements show that the CML flap can be more directional than the blunt flap.

Hutcheson, Florence V.↗
DOE OSTI2020

Engineering of Lead Selenide Quantum Dot Based Devices and Core/Shell Heterostructures

Near infrared (NIR) emitting colloidal quantum dots (QDs) such as PbSe are interesting materials for implementation in various optoelectronic devices such as solar cells, photodetectors, and radiation detectors. Material properties like size tunable emission wavelengths, facile solution processability, the possibility of carrier multiplication and Auger assisted up-conversion, and high Z number provide PbSe QDs with unique advantages over many currently available commercial materials used in these devices. In this dissertation, after an introduction to QDs in general, we first focus on synthesis of PbSe-based heterostructured QDs for study via optical spectroscopy. PbSe/CdSe QDs synthesized via cation exchange reaction were used as seeds to study the proper conditions for further CdSe or CdS shell growth. Optical spectroscopy studies show that growth of thicker CdSe shells leads to tunable visible emission, while growth of thick CdS shells can greatly increase the photoluminescence quantum yield (PLQY) observed from the intermediate CdSe shell. NIR PL lifetimes can be greatly enhanced by the growth of CdS shells, due to strong delocalization of the hole wavefunction within the PbSe core, while the electron is delocalized throughout the QD including in the CdS shell, resulting in radiative lifetimes in the tens of microseconds. Two pulse delay measurements show that Auger assisted up conversion is also taking place in these engineered QD dot heterostructures. In the sections that follow, we look at QD devices, first with a focus on novel devices fabricated from PbSe QDs, using an amine synthesis method that allows for facile in-solution ligand exchange. QD film mobilities are measured for PbSe QDs capped with various short ionic ligands. Carrier densities in PbSe QD films are calculated from C-V measurements, showing for the first time that carrier densities can be modulated by simply changing the capping ligand. vii Radiation detectors utilizing PbSe QDs capped with KI and NH4I ligands show tangible response to incident alpha radiation. Current output response to alpha radiation is dependent on strength of radiation source and amount of bias voltage applied. In the final section a critical review of hybrid layered 2D-QD photodetectors is presented. In a typical example, PbSe and PbS QDs act as the absorbing layer in phototransistor devices which utilize layered 2D materials such as graphene and transition metal dichalcogenides as transport layers. Resulting devices display high gains and improved directivities compared to QD only and 2D only devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

2021 Summer SPE Project

SPE is a project in order to develop new, more physics-based, seismic models of explosions (see Nelson et al. 2013). One key component of this effort is numerical modeling enabled by modern state-of-art code/software. Accurate modeling of the shape and amplitude of seismic waves from their generation to their propagation to remote monitoring seismic stations is important to our ability to determine the origin and strength of the source from remote recording. In this project, the modeling is performed by coupling two codes HOSS and SPECFEM3D. HOSS models the dynamic nonlinear processes happening near the explosion. SPECFEM3D computes the propagation of seismic waves as they travel through 3D complex Earth models. SPECFEM3D was modified in order to be driven by a set of time-series calculated by HOSS in lieu of a seismic source. The goal of this summer project is the investigation of several questions pertinent to the establishment of a full end-to-end modeling capability from the high-rate strain regime area to remote distances where seismic station record seismic waves generated by explosions. The investigated questions are: (1) How to perform proper filtering? Direct-solution modeling only sustains a limited range of frequency depending on the grid size. As we go from one modeling domain to the other via coupling, the mesh size is getting coarser to allow modeling at large scale but also to account for the fact that high-frequency waves do not physically travel to large distances. So filtering of the time-series generated by the near-field hydrodynamic modeling is a current practice often employed but its effects on the modeled waveforms has to be investigated. (2) Quantitative assessment of the efficiency of attenuation to remove high-frequency content of the wavefield. This assessment will allow to create meshes with a grid size appropriate to the actual physics of wave propagation for a given explosion. (3) Checking that the coupling process and the two codes respect the cylindrical symmetry that is expected in the case of a pure explosion in a half-space. (4) The effect of the state-of-stress in the near-source area on the modeled seismic waveforms. These questions will be investigated through the modeling of SPE-4P, the fourth explosion of this series because it was designed to have little interaction with the geologic surrounding and the free surface of the Earth so that it is the most explosion-like experiment, with the most symmetries to be verified.

58 GEOSCIENCES↗
DOE OSTI2026

Probability of Hydrogen Ignition: A Landscape Review and Gaps Assessment

The primary hazard of a leak from a hydrogen system is due to the immediate or delayed ignition of the fuel leading to a jet flame or explosion. Therefore, understanding the hydrogen ignition probability is critical for analyzing the risk of hydrogen systems. This report reviews the current understanding of hydrogen ignition mechanisms and methods for modeling their probability. The stoichiometry, ignition strength, and ignition source temperature are all important characteristics that can affect both the probability of ignition and the outcome of the subsequent combustion event. A brief review of diffusion ignition demonstrates that ignition probability models must account for seemingly spontaneous ignition of hydrogen in addition to scenarios where the ignition source is readily identified. State-of-the art models for both immediate and delayed ignition probabilities are presented, including different physical aspects of the scenarios (e.g., flow rate, ignition source characteristics) that are considered in the different modeling approaches. Current models often fail to account for the unique properties of hydrogen compared to other fuels, and most lack rigorous validation with hydrogen as a fuel. A fault tree framework is proposed to systematically evaluate the probability of ignition by integrating various ignition mechanisms and their uncertainties. Furthermore, this type of framework could enable additional insights into the most important mechanisms and would enable uncertainty quantification in risk assessment modeling. Recommendations for future research include the need for experimental validation of ignition models and the development of comprehensive methodologies that incorporate the specifics of hydrogen behavior in real-world scenarios.

hydrogen↗
NASA NTRS1969

Cryogenic flux-concentrator

Flux concentrator has high primary to secondary coupling efficiency enabling it to produce high magnetic fields. The device provides versatility in pulse duration, magnetic field strengths and power sources.

Bailey, B. M.↗
NASA NTRS1972

Basic Finance

A discussion of the basic measures of corporate financial strength, and the sources of the information is reported. Considered are: balance sheet, income statement, funds and cash flow, and financial ratios.

Vittek, J. F.↗
NASA NTRS1972

Discovery of the binary nature of SMC X-1 from Uhuru.

The X-ray source in the Small Magellanic Cloud SMC X-1 was observed by Uhuru on numerous occasions from December 1970 through April 1972. As previously reported by Leong et al. (1971), the source was seen to be variable. It was found that SMC X-1 occults with a period of 3.8927 days. The energy spectrum is cut off at low energies and flat. There is no large-amplitude periodic pulsation. The luminosity observed makes the binary source SMC X-1 comparable in strength to both the stronger galactic sources and the discrete sources in the Large Magellanic Cloud.

Schreier, E.↗
NASA NTRS1978

Unsteady vortical and entropic distortions of potential flows round arbitrary obstacles

The analysis concerns the alterations produced when small amplitude disturbances, including entropy and vorticity disturbances, are imposed on steady potential flows. For the most general nonacoustic incident distortion field that can be imposed on the uniform upstream flow, it is shown that the perturbation velocity at any point of the resulting unsteady compressible and vortical flow consists of a part that is a known function of the imposed upstream distortion field and the mean flow variables and a potential part that can be found by solving a linear inhomogeneous wave equation with a dipole-type source term whose strength is a known function of the imposed upstream distortion field. The theory is applied to the unsteady flow past a corner, and a closed-form analytical solution is found.

Goldstein, M. E.↗
NASA NTRS1978

The Orbiting Standards Platform

The Orbiting Standards Platform (OSP) is a combination satellite signal source and field strength meter which will make possible highly accurate, truly far-field measurements of large aperture antenna gain, pattern, sidelobes, and polarization as well as system G/T and EIRP. These measurements may be used to initially characterize earth station equipment and for the subsequent monitoring of its performance. This paper describes a technical-feasibility study of the OSP.

Dougherty, H. T.↗
NASA NTRS1978

An Orbiting Standards Platform for communication satellite system RF measurements

The Orbiting Standards Platform (OSP) is a proposed satellite dedicated to performing RF measurements on space communications systems. It would consist of a quasi-geostationary spacecraft containing an ensemble of calibrated RF sources and field strength meters operating in several microwave bands, and would be capable of accurately and conveniently measuring critical earth station and satellite RF performance parameters, such as EIRP, gain, figure of merit (G/T), crosspolarization, beamwidth, and sidelobe levels. The feasibility and utility of the OSP concept has been under joint study by NASA, NBS, Comsat and NTIA. A survey of potential OSP users was conducted by NTIA as part of this effort. The response to this survey, along with certain trends in satellite communications system design, indicates a growing need for such a measurement service.

Wallace, R. G.↗
NASA NTRS1980

Semi-empirical estimates of gravitational wave generation by stellar collapse

The problems of the generation and detection of gravitational waves and the difficulty of detecting the burst of gravitational radiation produced by a stellar collapse in our Galaxy, or in neighbouring clusters of galaxies where such collapses are expected to occur frequently, have been reviewed elsewhere. As stellar collapses, explosions, or supernovae are poorly understood, the values of the strength of these sources depend on uncertain assumptions. However, it is possible to make some independent estimates on semi-empirical grounds, using observed facts concerning the remnants of stellar evolution. These estimates, reported here, have serious weaknesses. They must involve oversimplified models and very crude standard calculations of the collapse and radiation processes. Also, because they are based on observed properties of stellar remnants, they say nothing about collapses which do not produce observable remnants. Although this selection may introduce a strong bias, these estimates deserve consideration because they are tied to real data.

Katz, J. I.↗
NASA NTRS1980

A note on sound radiation into a uniformly flowing fluid

Sound radiation generated by mechanical or vibratory source arrangements and, in some instances of planar or piston types, encompasses all magnitudes of the wavelength or frequency as well as disposition of the observation site. The comparative increase in average total radiated power from infinitesimally small or point sources of periodic strength, on passing from rest to steady rectilinear motion, depends only on Mach number in the noncompact case; and a formally analogous rise in output is linked, to the presence of a steady parallel flow past a rigid plane wall in which a compact circular piston executes normal oscillations. The perspective of effects connected with such a background is flow is widened by regard for an elongated or strip piston, which prototype permits a straightforward and general analysis.

Levine, H.↗
NASA NTRS1980

Temporal variations of the anomalous oxygen /1974-1979/ and disappearance in 1978

The temporal changes in the differential intensity and energy spectra of anomalous oxygen, and in the O/C ratios of the anomalous cosmic ray component during the 1974-79 time period were examined using data from the IMP-8 and ISEE-3 spacecrafts. In addition to the solar modulation of the intensity of anomalous oxygen, the strength of the source of this component varies, and in 1978 the anomalous component disappeared almost completely. The results disagree with the existence of a purely galactic source but are consistent with expectations based on an heliospheric origin hypothesis as formulated by Fisk et al., (1974).

Hovestadt, D.↗
NASA NTRS1984

MST radar data management

One atmospheric variable which can be deduced from stratosphere-troposphere (ST) radar data other than wind speed and direction is C sub n sup 2, related to the eddy dissipation rate. The computation of C sub n sup 2 makes use of the transmitted power (average, or peak plus duty cycle), the range of the echoes, and the returned power. The returned power can be calibrated only if a noise source of known strength is imposed; e.g., in the absence of absolute calibration, one can compare the diurnal noise signal with the galactic sky temperature. Thus to compute C sub n sup 2 one needs the transmitter power, the returned signal as a function of height, and the returned noise at an altitude so high that it is not contaminated by any signal. Now C sub n sup 2 relates with the amount of energy within the inertial subrange, and for many research studies it may be desirable to relate this with background flow as well as shears or irregularities on the size of the sample volume. The latter are quantified by the spectral width.

Nastrom, G. D.↗
NASA NTRS1985

Particles in the lower troposphere over the High Plains of the United States. I - Size distributions, elemental compositions and morphologies

Airborne measurements of particle size distributions obtained during the spring and summer of 1975-1976 at various locations in the high plains of the U.S. are presented. The instrumentation and techniques used to collect the data are described. Particle number, surface area, and volume distribution are measured; differences in particle concentrations are investigated. Variables in particle size are related to changes in strength of ground sources of Aitken nuclei, age of the particle population, and presence or absence of rain. An accumulation mode between particles diameters of 0.1-1 micron, a coarse particle mode between particle diameters between 10-20 microns, and a nucleation mode at particle diameters less than 0.1 micron are detected. The control of the accommodation and coarse particle modes and their influence on particle concentration are studied. The elemental composition of the particles is analyzed and the morphologies are examined with an electron scanner microscope.

Hobbs, P. V.↗
NASA NTRS1986

Quantitative VUV spectroscopy of Cl2

The photoabsorption and fluorescence cross sections of Cl2 were measured in the 105-145 nm region using synchrotron radiation as a light source. The oscillator strengths for the major absorption bands were calculated from the measured absorption cross sections. The measured oscillator strengths for the 2 3Pi u and 2 1Pi u - X 1Sigma(+)g transitions agree quite well with the theoretical values. The absorption spectrum was analyzed in accord with the excited electronic states calculated by Peyerimhoff and Buenker (1981). The Rydberg series converging to the first and second ionization potentials were classified. The vibrational levels of the 2 1Sigma(+)u ionic state were determined up to v prime = 15 from the fluorescence excitation spectrum. It was observed that a band with peak at 108.3 nm produces VUV fluorescence, but it produces UV fluorescence only by a collisional excitation process.

Lee, L. C.↗
NASA NTRS1986

Quantitative photoabsorption and fluorescence study of H2O and D2O at 50-190 nm

The photoabsorption cross sections and the fluorescence quantum yields of H2O and D2O were measured in the 50-190 nm region using synchrotron radiation as a light source. The oscillator strengths for the Rydberg states of H2O and D2O were determined from the absorption cross sections measured. The processes for the production of fluorescence from the excited species H(asterisk) (n greater than 2), D(asterisk) (n greater than 2), OH(asterisk) (A) and OD(asterisk) (A) are discussed. The upper limit for the dissociation energy of D(D-OD) was determined, from the threshold of the OD(A-X) fluorescence, to be 5.14 + or - 0.01 eV. The upper limit for the cross section of visible fluorescence from the excited H2O(+) ions was determined to be 2 x 10 to the -19th sq cm. A comparison between the photoexcitation spectra of H2O and D2O is made.

Lee, L. C.↗