Search NASA⌕ Search

SEARCH · Search NASA

Results for “standing wave”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

The magnetosphere

The terrestrial magnetic field shields the earth from the supersonic wind of the expanding solar atmosphere, forming a cavity called the magnetosphere. Since the velocity of the solar wind is supersonic, a detached shock wave stands in front of this cavity. The flow past the cavity is viscous, drawing the field lines back into a long tail. In this paper we review briefly the nature of the magnetosphere, the outstanding problem areas in this field, and what space missions are needed to attack these problems.

Russell, C. T.↗
NASA NTRS1976

Microwave radiometer for subsurface temperature measurement

A UHF radiometer, operating at a frequency of 800 MHz, was modified to provide an integral, three frequency voltage standing wave ratio (VSWR) circuit in the radio frequency (RF) head. The VSWR circuit provides readings of power transmission at the antenna-material interface with an accuracy of plus or minus 5 percent. The power transmission readings are numerically equal to the emissivity of the material under observation. Knowledge of material emissivity is useful in the interpretation of subsurface apparent temperatures obtained on phantom models of biological tissue. The emissivities of phantom models consisting of lean beefsteak were found to lie in the range 0.623 to 0.779, depending on moisture content. Radiometric measurements performed on instrumented phantoms showed that the radiometer was capable of sensing small temperature changes occurring at depths of at least 19 to 30 mm. This is consistent with previously generated data which showed that the radiometer could sense temperatures at a depth of 38 mm.

Porter, R. A.↗
NASA NTRS1978

Diode laser saturation spectroscopy of NH3

Saturation of molecular transitions using a tuneable diode laser was demonstrated for the first time using a standing-wave cavity configuration with an f/8 beam focussed at the sample. Observed saturation effects in NH3 transitions near 888/cm include sub-Doppler (Lamb-dip) resonances at line center.

Jennings, D. E.↗
NASA NTRS1977

An electrostatically driven surface for flexible wall drag reduction studies

This paper describes the theoretical analysis, experimental development and surface motion data from an electrostatically driven flexible wall capable of producing high frequency, large amplitude, short wavelength standing wave motions. The driven wall was developed for use in studying flexible wall-turbulent boundary layer interactions. The theoretical analysis considers the coupled electrochemical system using a continuum model. For the system under consideration the electrical field is uncoupled from the mechanical system leading to a simplified analysis. The structural problem is a non-linear (moderately) large amplitude problem and details of the analysis are presented. Surface motion measurements, made using a modified schlieren type optical system, are discussed and details of the surface motion under different excitations are presented. Fair agreement is obtained between experimental measurements and theoretical calculations.

Weinstein, L. M.↗
NASA NTRS1978

Saturated absorption in NH3 demonstrated using a tuneable diode laser

Saturation of molecular transitions using a tunable diode laser has been demonstrated for the first time using a standing-wave-cavity configuration with the laser beam focused at the sample. Observed saturation effects in NH3 transitions near 888 kaysers include sub-Doppler (Lamb-dip) resonances at the line center.

Jennings, D. E.↗
NASA NTRS1980

Improved acoustic levitation apparatus

Concave driver and reflector enhance and shape levitation forces in acoustic resonance system. Single-mode standing-wave pattern is focused by ring element situated between driver and reflector. Concave surfaces increase levitating forces up to factor of 6 as opposed to conventional flat surfaces, making it possible to suspend heavier objects.

Berge, L. H.↗
NASA NTRS1979

Measurements of admittances and characteristic combustion times of reactive gaseous propellant coaxial injectors

The results of an experimental investigation that was concerned with the quantitative determination of the capabilities of combustion processes associated with coaxial injectors to amplify and sustain combustor oscillations was described. The driving provided by the combustion process was determined by employing the modified standing-wave method utilizing coaxial injectors and air-acetylene mixtures. Analyses of the measured data indicate that the investigated injectors are capable of initiating and amplifying combustion instabilities under favorable conditions of injector-combustion coupling and over certain frequency ranges. These frequency ranges and the frequency at which an injector's driving capacity is maximum are observed to depend upon the equivalence ratio, the pressure drop across the injector orifices and the number of injector elements. The characteristic combustion times of coaxial injectors were determined from steady state temperature measurements.

Janardan, B. A.↗
NASA NTRS1979

Development of tunable high pressure CO2 laser for lidar measurements of pollutants and wind velocities, January 1976 to December 1977

A tunable multiatmospheric pulsed CO2 laser with emphasis on experimental features and supporting theoretical analyses important to differential absorption lidar and Doppler lidar measurement of pollutants and wind velocities is reported. The energy deposition and the means to produce the uniform high density plasma in the multiatmospheric medium, through UV preionization of an organic seed gas is discussed. Design features of the pulsed CO2 laser are presented. The radiative processes which are operative and prevent the laser from breaking into oscillations in a large number of modes over its broad amplification bandwidth are described. The mode competition for the transient pulsed laser oscillation in a standing wave and traveling wave ring laser configuration is discussed and contrasted with the approach to steady state oscillations. The latter findings are important to transient injection locking for production of a highly stable pulsed CO2 laser output.

Javan, A.↗
NASA NTRS1979

Phase 2: Array automated assembly task low cost silicon solar array project

Several microwave systems for use in solar cell fabrication were developed and experimentally tested. The first system used a standing wave rectangular waveguide horn applicator. Satisfactory results were achieved with this system for impedance matching and wafer surface heating uniformity. The second system utilized a resonant TM sub 011 mode cylindrical cavity but could not be employed due to its poor energy coupling efficiency. The third and fourth microwave systems utilized a circular waveguide operating in the TM sub 01 and TM sub 11 but had problems with impedance matching, efficiency, and field uniformity.

Jones, G. T.↗
NASA NTRS1979

Driving of combustor oscillations by gaseous propellant injectors

Measurements of reactive admittances that describe the capabilities of the combustion processes associated with coaxial gaseous fuel injectors to amplify combustor oscillations are presented. These admittances are needed in (1) stability analyses of rocket motors and gas turbine combustors; (2) for the evaluation of 'driving' capabilities of injectors; and (3) for checking the applicability of a theoretical model. The modified standing-wave technique was used to determine the admittances of the combustion processes in coaxial injectors utilizing air-acetylene mixtures. The measurements indicated that (1) coaxial injectors can sustain combustion instabilities over wide frequency ranges; (2) the maximum driving capability of an injector decreases with an increased equivalence ratio; (3) the frequency at which maximum driving is observed decreases with the increased equivalence ratio; and (4) the characteristic combustion time of an injector design decreases with increased frequency.

Janardan, B. A.↗
NASA NTRS1980

Variations on a spherically symmetrical accretion flow

Spherically symmetrical accretion onto a compact gravitating object is considered from a purely hydrodynamical viewpoint while disregarding heating and cooling processes. The study derives the radial perturbation equation, expresses it in a Eulerian form which is simpler than the Lagrangian form considered, for example, by Balazs (1972), and discusses the relation between the two formulations. This perturbation equation is used for the stability analysis of standing waves as well as for the study of short wavelength traveling waves which are a generalization of Parker's (1966) traveling wave solutions in the sense that they are not restricted to isothermal flows. These traveling waves can cause fluctuations in the mass accretion rate to grow large, but will not drive the unperturbed solution away from its assumed stationary profile. The waves conserve the total energy contained in the perturbation.

Petterson, J. A.↗
NASA NTRS1980

Aerodynamic stability analysis of NASA J85-13/planar pressure pulse generator installation

A digital computer simulation model for the J85-13/Planar Pressure Pulse Generator (P3 G) test installation was developed by modifying an existing General Electric compression system model. This modification included the incorporation of a novel method for describing the unsteady blade lift force. This approach significantly enhanced the capability of the model to handle unsteady flows. In addition, the frequency response characteristics of the J85-13/P3G test installation were analyzed in support of selecting instrumentation locations to avoid standing wave nodes within the test apparatus and thus, low signal levels. The feasibility of employing explicit analytical expression for surge prediction was also studied.

Chung, K.↗
NASA NTRS1980

Laser-heated thruster

The development of computer codes for the thrust chamber of a rocket of which the propellant gas is heated by a CW laser beam was investigated. The following results are presented: (1) simplified models of laser heated thrusters for approximate parametric studies and performance mapping; (3) computer programs for thrust chamber design; and (3) shock tube experiment to measure absorption coefficients. Two thrust chamber design programs are outlined: (1) for seeded hydrogen, with both low temperature and high temperature seeds, which absorbs the laser radiation continuously, starting at the inlet gas temperature; and (2) for hydrogen seeded with cesium, in which a laser supported combustion wave stands near the gas inlet, and heats the gas up to a temperature at which the gas can absorb the laser energy.

Kemp, N. H.↗
NASA NTRS1979

Acoustic levitation and manipulation for space applications

A wide spectrum of experiments to be performed in space in a microgravity environment require levitation and manipulation of liquid or molten samples. A novel acoustic method has been developed at JPL for controlling liquid samples without physical contacts. This method utilizes the static pressure generated by three orthogonal acoustic standing waves excited within an enclosure. Furthermore, this method will allow the sample to be rotated and/or oscillated by modifying the phase angles and/or the amplitude of the acoustic field. This technique has been proven both in our laboratory and in a microgravity environment provided by KC-135 flights. Samples placed within our chamber driven at (1,0,0), (0,1,0), and (0,0,1), modes were indeed levitated, rotated, and oscillated.

Wang, T. G.↗
NASA NTRS1981

Verification of an acoustic transmission matrix analysis of sound propagation in a variable area duct without flow

A predicted standing wave pressure and phase angle profile for a hard wall rectangular duct with a region of converging-diverging area variation is compared to published experimental measurements in a study of sound propagation without flow. The factor of 1/2 area variation used is sufficient magnitude to produce large reflections. The prediction is based on a transmission matrix approach developed for the analysis of sound propagation in a variable area duct with and without flow. The agreement between the measured and predicted results is shown to be excellent.

Miles, J. H.↗
NASA NTRS1981

Experimental and analytical investigation of a fluidic power generator

A combined experimental and analytical investigation was performed to understand the various fluid processes associated with the conversion of flow energy into electric power in a fluidic generator. Experiments were performed under flight-simulated laboratory conditions and results were compared with those obtained in the free-flight conditions. It is concluded that the mean mass flow critically controlled the output of the fluidic generator. Cross-correlation of the outputs of transducer data indicate the presence of a standing wave in the tube; the mechanism of oscillation is an acoustic resonance tube phenomenon. A linearized model was constructed coupling the flow behavior of the jet, the jet-layer, the tube, the cavity, and the holes of the fluidic generator. The analytical results also show that the mode of the fluidic power generator is an acoustical resonance phenomenon with the frequency of operation given by f approx = a/4L, where f is the frequency of jet swallowing, a is the average speed of sound in the tube, and L is the length of the tube. Analytical results further indicated that oscillations in the fluidic generator are always damped and consequently there is a forcing of the system in operation.

Sarohia, V.↗
NASA NTRS1982

[Acoustic Levitation Methods and Apparatus]

Methods are described for acoustically levitating objects within chambers of spherical and cylindrical shape. The wavelengths for chambers of particular dimensions are given, for generating standing wave patterns of any of a variety of modes within the chambers. For a spherical chamber the lowest resonant mode is excited by applying a wavelength of 3.02R, where R is the chamber radius. The two lowest pure radial modes for that chamber, are excited by applying wavelengths of 1.40R and 0.814R. For a cylindrical chamber of radius R, the lowest mode is at a wavelength of 3.41R, and the lowest pure radial modes are at wavelengths of 1.64R and 0.896R.

Barmatz, M. B.↗
NASA NTRS1981

Effects of vane/blade ratio and spacing on fan noise

The effects of vane/blade ratio and spacing on fan noise are investigated to develop a fan noise prediction scheme which is calibrated against experimental data. A 44 blade, 0.504 diameter fan is used to demonstrate the production of fan noise data free from excess noise caused by rotor turbulence interaction. Two stator sets consisting of a cut-off set with 86 vanes, and a cut-on set of 48 vanes are used, with a total range of spacing from 0.5 to 2.3 rotor chords. The model includes viscous wake interaction noise and the potential field interactions of both the rotor and stator. A free-field acoustic environment is achieved by covering the walls, ceiling and floor with 0.7 m polyurethane foam wedges, providing less than + or - 1 dB standing wave ratio at 200 Hz. Only a 3 dB drop in tone level occurs as the spacing is increased from 0.5 to 2.3 rotor chords, and results indicate that the rotor wakes impinging on the stator vanes are the principal noise source for subsonic rotor speeds.

Kantola, R. A.↗