SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Iris-leaf core retainer insures retention of a complete sample within the drill string. Individual overlapping leaves will not rupture or tear out when they come in contact with the oncoming core.
Large amplitude, linear inertial reference system of vibrating string type for spacecraft reference plane
Sealed fluorescent tube light unit capable of connection with other units to form string of work lights
Existence and extendability of continuous eigenvector branches and application of nonlinear programming algorithms to nonlinear heat generation and rotating string problems
A semi-automatic, self-levelling lunar gravimeter was designed for the purpose of measuring gravity at predetermined stops along the route of a lunar rover vehicle to obtain a gravity profile. The traverse gravimeter is completely self-contained and is powered by an internal battery. The gravity sensor is a vibrating string accelerometer (VSA) which is enclosed in a precision oven. Gravity data are obtained by initiating a measurement. After the gravimeter has levelled, the VSA difference frequency is counted down and a gate is generated to enable a crystal-controlled clock to a BCD counter. The BCD counter stores the data which are a measurement of gravity. These data, displayed upon command by the astronaut, are transmitted by voice back to earth. It is expected that the accuracy of the gravimeter will be better than one milligal. Low power, light weight, reliability, and simplicity of operation are major considerations in the design of the gravimeter.
A wind tunnel balance system was designed to determine the wind-induced vibrations of a space shuttle model. The balance utilizes a flexible sting mounting in conjunction with a geometrically scaled rigid model. Bending and torsional displacements are determined through strain-gauge-instrumented spring bar mechanisms. The natural frequency of the string-model system can be varied continuously throughout the expected scaled frequency range of the shuttle vehicle while a test is in progress by the use of moveable riders on the spring bar mechanism. Through the use of a frequency analyzer, the output can be used to determine troublesome vibrational frequencies. A dimensional analysis of the wind-induced vibration problem is also presented which suggests a test procedure. In addition a computer program for analytical studies of the forced vibration problem is presented.
The behavior of hyperbolic and parabolic partial differential equations is contrasted by studying the point-to-point time-optimal control problem for the equation of heat conduction and the equation of motion of a vibrating string. A maximal principle is obtained for the time-optimal control of the one-dimensional heat equation, and it is proven that time optimal controls are weakly bang-bang. The bang-bang principle is proven to be invalid for hyperbolic equations because of the finite speed of wave propagation. In the case of boundary value control of the vibrating spring, the latter is demonstrated by deriving an explicit formula for the time optimal control.
A semiautomatic, self-leveling lunar gravimeter has been designed for the purpose of measuring gravity at predetermined stops along the route of a Lunar Rover Vehicle to obtain a gravity profile. The Traverse Gravimeter is completely self-contained and is powered by an internal battery. The gravity sensor is a vibrating string accelerometer (VSA) which is enclosed in a precision oven. Gravity data are obtained by initiating a measurement. After the gravimeter has leveled, the VSA difference frequency is counted down and a gate is generated to enable a crystal-controlled clock to a BCD counter. The BCD counter stores the data which are a measurement of gravity. These data, displayed upon command by the astronaut, are transmitted by voice back to earth.
The controllability and steady-state response of parallel-redundant flight control systems are examined. It is found that state components which appear in the parallel signal paths, e.g., individual actuator commands, are not controllable, although the sum of the command signals is well-behaved. If the response modes associated with these components are not stable, bias errors can cause the components to diverge, leading to the possibility of 'nuisance trips' in failure detection/isolation logic and eventual control system lockup (at saturation). Combining the inputs to the control computers assures that sensor bias will not cause divergence, while cross-strapping control strings bounds divergent response to all bias error inputs. Results of numerical solutions confirm the problem and its solutions.
A one-sixth scale model of the lunar roving vehicle used in the Apollo 15 mission was built and instrumented to conduct model studies of vehicle mobility. The model was free running under radio control and was equipped with a lightweight telemetry transmitter that allowed 16 channels of data to be gathered simultaneously. String payout and fifth-wheel devices were developed to measure vehicle velocity. Other real-time measurements included wheel torque, wheel speed, center-of-gravity accelerations, and steering forces. Calibration, operations, and maintenance procedures were worked out. Details of the development of the instrumentation, its maintenance, and some of the problems encountered, are recorded serve as a preliminary operations and maintenance manual for this specific model. In addition, information regarding soil processing and testing that may be useful to NASA personnel planning mobility research with the model in soil is furnished.
The controllability and steady-state response of parallel-redundant flight control systems are examined. It is found that state components which appear in the parallel signal paths, or individual actuator commands, are not controllable, although the sum of the command signals is well-behaved. If the response modes associated with these components are not stable, bias errors can cause the components to diverge, leading to the possibility of nuisance trips in failure detection/isolation logic and eventual control system lockup (at saturation). Combining the inputs to the control computers assures that sensor bias will not cause divergence, while cross-strapping control strings bounds divergent response to all bias error inputs. Results of numerical solutions confirm the problem and its solutions.
A gyrator circuit of the conventional configuration of two amplifiers in a circular loop, one producing zero phase shift and the other producing 180 deg phase reversal is examined. All active elements are MOS field effect transistors. Each amplifier comprises a differential amplifier configuration with current limiting transistor, followed by an output transistor in cascode configuration, and two load transistors of opposite conductivity type from the other transistors. A voltage divider control circuit comprises a series string of transistors with a central voltage input to provide control, with locations on the amplifiers receiving reference voltages by connection to appropriate points on the divider. The circuit produces excellent response and is well suited for fabrication by integrated circuits.
A semiautomatic self-leveling lunar gravimeter has been designed for the Apollo 17 mission. This traverse gravimeter, which is completely self-contained and powered by an internal battery, was used to measure gravity at predetermined stops along the route of the Lunar Rover Vehicle. The gravity sensor is a vibrating string accelerometer (VSA) enclosed in a temperature-controlled oven and gimballed leveling assembly. This instrument is capable of resolving gravity differences as small as 0.035 milligal (1 mgal = 0.001 cm/s) on the moon and yet also is able to measure the earth's gravity field of 980,000 milligals. Twenty-two measurements were taken on the moon during the Apollo 17 mission, during which the VSA temperature never varied more than 0.005 C. The flight results indicate an instrument accuracy of better than 2 mgal.
The Small Interactive Image Processing System (SMIPS) operates under control of the IBM-OS/MVT operating system and uses an IBM-2250 model 1 display unit as interactive graphic device. The input language in the form of character strings or attentions from keys and light pen is interpreted and causes processing of built-in image processing functions as well as execution of a variable number of application programs kept on a private disk file. A description of design considerations is given and characteristics, structure and logic flow of SMIPS are summarized. Data management and graphic programming techniques used for the interactive manipulation and display of digital pictures are also discussed.
The controllability and steady-state response of parallel-redundant flight control systems are examined. It is found that state components which appear in the parallel signal paths, e.g., individual actuator-commands, are not controllable, although the sum of the command signals is well behaved. If the response modes associated with these components are not stable, bias errors can cause the components to diverge, leading to the possibility of nuisance trips in failure detection/isolation logic and eventual control system lockup (at saturation). Combining the inputs to the control computers assures that sensor bias will not cause divergence, while cross-strapping control strings bounds divergent response to all bias error inputs.
REDUCE 2 is reported as a FORMAC program which symbolically calculates the transfer function(s) of any linear-block-diagram output variable to any or all input variables. The program requires as input a set of algebraic expressions representing the block diagram, the desired transfer function(s), and a string of variables indicating the desired order of reduction. The solution is presented in the compact form of a set of nested functions (super G's). The program can handle systems as large as 600 equations and is intended as a tool for the analysis of complex control and dynamic systems. A companion FORTRAN program, EVAL 2, which numerically evaluates the solution set to obtain amplitude ratio and phase angle as functions of frequency is also presented.
The vibration characteristics of an unidimensional structure are discussed. The cases considered are: (1) a rigid pipe in which a wave propagates, (2) an infinite string along which a transverse wave propagates, (3) a rod along which longitudinal or torsional columns propagate, and (4) generally a unidimensional propagation of some one mode of vibrations which is nondegenerating with distance. Mathematical models are developed to show the performance of the mechanical devices under various damping conditions.
Experimental aerodynamic investigations were conducted on a string-mounted 0.030 scale representation of the 140A/B space shuttle orbiter in the 7.75- by 11-foot low speed wind tunnel. The primary test objectives were to establish basic longitudinal and lateral directional stability and control characteristics for the basic configuration plus control surface hinge moments. Aerodynamic force and moment data were measured in the body axis system by an internally mounted, six-component strain gage balance. Additional configurations investigated were sealed rudder hingeline gaps, sealed elevon gaps and compartmentized speedbrakes.