Metal Construction Development. Part III : Strip Metal Construction - Wing Ribs
Strip metal construction of wing spars are presented as well as workshop practices.
WING SPARS, ARMSTRONG WHITWORTH↗
SEARCH · Search NASA
Results for “stripping”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Strip antenna figure errors due to support truss member length imperfections
The dependence of strip antenna steadyy state geometric errors on member length uncertainties in the supporting truss beam is studied with the Monte carlo analysis of a representative truss design. The results, presented in a format streamlined for practical use, can guide the specification for hardware fabrication of required error tolerances (for structural properties as well as member lengths), or they can aid the prediction of antenna performance if component statistics are available.
truss↗
Low Carbon Technology Strategies: Stand-Alone Retail and Strip Mall
This document includes steps that building owners and operators can implement to achieve smart, healthy, and low-carbon retail buildings within their existing building portfolios. Stand-alone retail and strip malls often use packaged rooftop units for heating, cooling, and ventilation.
analytics↗
Increasing the Pressure‐Free Stripping Capacity of the Lithium Metal Anode in Solid‐State‐Batteries by Carbon Nanotubes
Abstract Lithium metal is the key anode material for solid‐state‐batteries as its successful implementation will drastically increase their energy and power densities. However, anode contact loss during stripping leads to dendrites upon plating and subsequent cell failure. Design strategies to mitigate these issues are crucial to enable the use of lithium metal anodes. This paper reports the dissolution kinetics of composite anodes made of lithium metal and carbon nanotubes (CNTs) with a garnet‐type solid electrolyte (SE). In addition to an enhancement of the effective diffusion within the anode, its dissolution is fundamentally changed from being 2D to 3D. By maintaining contact with the SE, the CNTs facilitate lithium transport to the interface, which yields more than 20 mAh cm −2 discharge capacity at 100 µ A cm −2 without the application of external stack pressure ( > 1 MPa). Conclusions drawn from electrochemical data on the anode microstructure are validated using cryo‐focused‐ion‐beam scanning electron microscopy and correlated with the mechanical properties. Micro‐indentation, acoustic analysis, and stress–strain testing show that mechanical properties of the anode, like yield strength and hardness, are adjustable. Overall, it is shown that the mechanical and electrochemical properties of Li–CNT composite electrodes can be tailored to suit the requirements of a practical cell.
Fuchs, Till↗
Characterizing hole trap production due to proton irradiation in germanium cross-strip detectors
We present an investigation into the effects of high-energy proton damage on charge trapping in germanium cross-strip detectors with the goal of accomplishing three important measurements. First, we calibrated and characterized the spectral resolution of a spare COSI-balloon detector in order to determine the effects of intrinsic trapping, finding that electron trapping due to impurities dominates over hole trapping in the undamaged detector. Second, we performed two rounds of proton irradiation of the detector in order to quantify, for the first time, the rate at which charge traps are produced by proton irradiation. We find that the product of the hole trap density and cross-sectional area, [nσ] h , follows a linear relationship with the proton fluence, F p , with a slope of (5.4 ± 0.4) x 10 -11 cm/p + . Third, by utilizing our measurements of physical trapping parameters, we performed calibrations which corrected for the effects of trapping and mitigated degradation to the spectral resolution of the detector.
79 ASTRONOMY AND ASTROPHYSICS↗
Biomarker Mapping on Skin Tape Strips Using MALDI Mass Spectrometry Imaging
Keratinocyte organization and biochemistry are important in forming the skin’s protective barrier. Intrinsic and extrinsic factors can affect skin barrier function at the cellular and molecular levels. Matrix-assisted laser desorption/ionization (MALDI) mass spectrometric imaging, a technique which combines both molecular aspects and histological details, has proven to be a valuable method in various disciplines including pharmacology, dermatology and cosmetology. It typically requires ex vivo samples, prepared following frozen tissue sectioning. This paper demonstrates the feasibility of performing MALDI analysis on tape strips collected non-invasively on skin. The aim is to obtain molecular imaging of corneocytes on tapes towards novel biological insights. Tapes were collected from two skin sites (volar forearm and cheek) of human volunteers. Ten molecules relating to skin barrier function were detected with a single mode of acquisition at high spatial resolution with a 7 T MALDI-Fourier transform ion cyclotron resonance (FTICR) instrument. The method sensitivity was adequate to create molecular maps which could be overlaid on transmission microscopy images of the same area of the tape. Analysis of the molecular distributions from tapes at the two skin sites was consistent with the known skin properties of the two sites, confirming the validity of the observations. Hierarchical clustering analysis was used to differentiate corneocyte populations based on their molecular profiles. Furthermore, morphological analysis provided a new way of considering statistical populations of corneocytes on the same tape, rather than measuring a single averaged value, providing additional useful information relating to their structure-function relationship. .
62 RADIOLOGY AND NUCLEAR MEDICINE↗
Electron capture, ionization and excitation cross sections for keV collisions between fully stripped ions and atomic hydrogen in ground and excited states
Using a semiclassical close-coupling approach, we have calculated electron capture, excitation and ionization cross sections for collisions of fully stripped hydrogen, helium and lithium ions with atomic hydrogen in the ground state and in all excited states up to n=3. The cross sections for collision energies between 1 and 100 keV/u are given in table form. Furthermore, we provide estimates of the accuracy of the cross sections. The set of data presented in this work represent the first complete and consistent quantum study of these collision systems and will find use in the modeling and diagnosis of thermonuclear fusion plasma reactors.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Separation of thorium, uranium, and rare earths from a strip solution generated from coarse coal refuse
This work systematically evaluated the separation performance of thorium, uranium, and rare earths when coal and coal byproduct were utilized as a non-traditional feedstock for rare earth production. A synthetic solution was prepared following the elemental composition of a strip solution generated from coarse coal refuse and used throughout the study. Various separation techniques including selective precipitation, solvent extraction, and a modified experimental protocol incorporating the two were applied to extract rare earths while minimizing the non-selective recovery of thorium and uranium into the product stream. Test results indicate that selective precipitation was effective for the removal of thorium at a pH value approaching 5 while solvent extraction preferentially removed uranium from rare earths. Therefore, a modified experimental protocol consisting of both selective precipitation and solvent extraction was subsequently developed and implemented. The findings following the modified experimental protocol indicate that extractant concentration, solvent extraction feed pH, and organic to aqueous (O/A) ratio all played a significant role in the removal of uranium. Among all the tests conducted, the best separation performance was achieved using a one-stage precipitation at a pH value of 4.8, 50 v% TBP, solvent extraction feed pH of 3.5, and an O/A ratio of 3, which corresponded to an overall rare earth, thorium, and uranium recovery of 79.6%, 0%, and 3.1%, respectively.
01 COAL, LIGNITE, AND PEAT↗
Charge collection study with the ATLAS ITk prototype silicon strip sensors ATLAS17LS
The inner tracker of the ATLAS detector is scheduled to be replaced by a completely new silicon-based inner tracker (ITk) for the Phase-II of the CERN LHC (HL-LHC). The silicon strip detector covers the volume 40 < R < 100 cm in the radial and | z | < 300 cm in the longitudinal directions. The silicon sensors for the detector will be fabricated using the n + -on-p 6-inch wafer technology, for a total of 22,000 wafers. Here, intensive studies were carried out on the final prototype sensors ATLAS17LS fabricated by Hamamatsu Photonics (HPK). The charge collection properties were examined using penetrating 90 Sr β -rays and the ALIBAVA fast readout system for the miniature sensors of 1 cm × 1 cm in area. The samples were irradiated by protons in the 27 MeV Birmingham Cyclotron, the 70 MeV CYRIC at Tohoku University, and the 24 GeV CERN-PS, and by neutrons at Ljubljana TRIGA reactor for fluence values up to 2 × 10 15 n eq /cm 2 . The change in the charge collection with fluence was found to be similar to the previous prototype ATLAS12, and acceptable for the ITk. Sensors with two active thicknesses, 300 μ m (standard) and 240 μ m (thin), were compared and the difference in the charge collection was observed to be small for bias voltages up to 500 V. Some samples were also irradiated with gamma radiation up to 2 MGy, and the full depletion voltage was found to decrease with the dose. This was caused by the Compton electrons due to the 60 Co gamma radiation. To summarize, the design of the ATLAS17LS and technology for its fabrication have been verified for implementation in the ITk. We are in the stage of sensor pre-production with the first sensors already delivered in January of 2020.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Stroboscopic ultrafast imaging using RF strip-lines in a commercial transmission electron microscope
The development of ultrafast electron microscopy (UEM), specifically stroboscopic imaging, has brought the study of structural dynamics to a new level by overcoming the spatial limitations of ultrafast spectroscopy and the temporal restrictions of traditional TEM simultaneously. Combining the concepts governing both techniques has enabled direct visualization of dynamics with spatiotemporal resolutions in the picosecond-nanometer regime. Here, in this study, we push the limits of imaging using a pulsed electron beam via RF induced transverse deflection based on the newly developed 200 keV frequency-tunable strip-line pulser. We demonstrate 0.2 nm spatial resolution at high magnifications and elucidation of Lorentz imaging using the phase-microscopy method. We also present beam coherence measurements and expand our study using the breathing modes of a silicon interdigitated comb under RF excitation which achieves improved temporal synchronization between the electron pulse-train and electric field. A new RF holder has also been developed with impedance matching to the RF signal to minimize transmission power loss to samples and its performance is compared with a conventional sample holder.
47 OTHER INSTRUMENTATION↗
Smartphone-based Dual-channel Immunochromatographic Test Strip with Polymer Quantum Dot Labels for Simultaneous Detection of Cypermethrin and 3-phenoxybenzoic acid
Currently, gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass spectrometry (LC-MS) are the primary methods used to detect pesticides and their metabolites for biomonitoring of exposure. Although GC-MS and LC-MS can provide accurate and sensitive measurements, these techniques are not suitable for point-of-care or in-field biomonitoring applications. The objective of this work is to develop a smartphone-based dual-channel immunochromatographic test strip (ICTS) for on-site biomonitoring of exposure to cypermethrin by simultaneous detection of cypermethrin and its metabolite, 3-phenoxybenzoic acid (3-PBA). Polymer carbon dots (PCDs) with ultra-high fluorescent brightness were synthesized and used as signal amplifier in ICTS assay. Cypermethrin (a representative pyrethroid pesticide) and its major metabolite 3-PBA were simultaneously detected to provide more comprehensive analysis of cypermethrin exposure. After competitive immunoreactions between the target sample and the coating antigens preloaded on the test line, the tracer antibody (PCDs conjugated antibody) was quantitatively captured on the test lines. The captured PCDs were inversely proportional to the amount of the target compound in sample. The red fluorescence on the test line then was recorded by a smartphone-based device capable of conducting image analysis and recording. Under optimal conditions, the sensor showed excellent linear responses for detecting cypermethrin and 3-PBA ranging from 1 ng/mL to 100 ng/mL and from 0.1 ng/mL to 100 ng/mL, the limits of detection were calculated to be ~0.35 ng/mL for cypermethrin and ~0.04 ng/mL for 3-PBA, respectively. The results demonstrate that the ICTS device is promising for accurate point-of-care biomonitoring of pesticide exposure.
Zhao, Yuting↗
Anode Potential Evolution During Zinc Metal Plating and Stripping in Dual-Solvent Battery Electrolytes
In the field of battery electrolyte research, the importance of the working cation solvation environment has become increasingly more apparent. To optimize bulk properties and, especially, interfacial reactions, multisolvent electrolytes (electrolytes containing two different solvents) have become more prevalent in battery research and development. In this work, we elucidate the relationship between cation solvation and interfacial electrochemistry, demonstrating that preferential solvation of Zn 2+ by a strong coordinating solvent such as 2-methoxyethylamine or ethylenediamine as opposed to a weaker solvent such as 3-methylsulfolane or acetonitrile leads to dynamic evolution in the interfacial energetics during Zn plating and stripping due to local changes in solvent composition and coordination. In some instances, interfacial solvation evolution can shift the reversible potential of Zn plating by as much as 1 V under relatively mild rate conditions. Through these investigations, we establish the generality of this phenomenon, highlight its importance as a consideration in dual-solvent battery electrolytes, and provide direction for tailoring electrochemistry through solvent design.
Hahn, Nathan T.↗
Terahertz Nano-Imaging of Electronic Strip Heterogeneity in a Dirac Semimetal
Emerging topological semimetals offer promise of realizing topological electronics enabled by terahertz (THz) current persistent against impurity scattering. Yet most fundamental issues remain on how to image nanoscale conductivity inhomogeneity. Here in this paper we show noninvasive and contactless conductivity mapping at THz-nm limit of electronic heterogeneity and nanostrip junctions in a Dirac material ZrTe 5 . A clear Dirac Fermion density transition, manifested as the exclusive THz conductivity contrast, is quantitatively analyzed and profiled on both sides of the junction. This also allows the determination of variable junction width of ~25–220 nm, depending on the THz conductivity contrast of adjacent strips. The unique THz-nm contrast is absent in mid-infrared nano-imaging measurements since topological semimetals with small Fermi pockets exhibit a better matching of their plasma frequency and scattering rate to the THz spectral region. The first-principles calculations provide two compelling implications: the conductivity nanocontrast can be induced by a small anisotropic strain, even less than 0.5%, due to an extreme strain sensitivity in ZrTe 5 ; A nanoscale topological phase transition is realized across some junctions induced by the strain, between strong topological insulators (TIs) and weak TIs/Dirac semimetals (DSMs).
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Liquid crystal defect structures with Möbius strip topology
Topological solitons commonly appear as energy-minimizing field configurations, but examples of stable, spatially localized objects with coexisting solitonic structures and singular defects are rare. Here we use a nonpolar chiral liquid crystal system to show how twist domain walls can co-self-assemble with vortices to form spatially localized topological objects with spontaneous folding. These soliton–vortex assemblies, which we call ‘möbiusons’, have a topology of the molecular alignment field resembling that of the Möbius strip’s surface and package localized field excitations into folded structures within a confinement-frustrated uniform far-field background. Upon supplying energy in the form of electric pulses, möbiusons with different overall symmetries of structure exhibit folding-dependent rotational and translational motions, as well as topological cargo-carrying abilities that can be controlled by tuning the amplitude and frequency of the applied fields. We demonstrate on-demand transformations between various möbiusons and show examples of encoding information by manipulating folds in such structures. A model based on the energetics of solitons and vortices provides insights into the origins of the folding instability, whereas minimization of the Landau–de Gennes free energy closely reproduces details of their internal structure. Our findings may provide a route towards topology-enabled light-steering designs.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Lithium stripping: anisotropic evolution and faceting of pits revealed by operando 3-D microscopy
Operando 3-D microscopy of individual pits during Li metal anode stripping demonstrates anisotropic expansion, edge faceting, and surface microstructure effects.
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
Electrolytic gold plating, stripping, and ion transport dynamics through a solid-state iodide perovskite
The pronounced electrochemical reactivity between halide perovskites and metal electrodes can introduce mobile extrinsic metal ions which can cause device instability or enable novel functionalities. Here we systematically investigate the kinetics of gold cation (Au + ) migration in indium tin oxide (ITO)/methylammonium lead triiodide (MAPbI 3 )/Au model devices under long-term potentiostatic biasing. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) analyses reveal that Au + ions, electrochemically generated at the Au anode, traverse the perovskite layer with diffusion coefficients on the order of 10 −11 to 10 −10 cm 2 s −1 and are subsequently reduced at the cathode as Au 0 clusters, resembling metal plating behavior in electrolytic cells and solid-state batteries during charging. Furthermore, reversing the applied bias strips the plated Au 0 , revealing reversibility suitable for bipolar resistive switching devices and providing direct evidence of the electrochemical and ionic nature of Au transport within the perovskite matrix. Quantitatively determining diffusion coefficients and ion concentrations provides foundational inputs for future drift-diffusion modelling opportunities and allows us to relate our findings to implications on long term operation of devices like photovoltaic modules. These results clearly demonstrate the solid-state electrochemical nature of perovskite devices, highlight methods to be more quantitative about ion transport properties, provide and emphasize the importance of disentangling electro-, photo-, photoelectrochemical processes for understanding device performance and unlocking new functionalities.
14 SOLAR ENERGY↗
SN 2018ijp: the explosion of a stripped-envelope star within a dense H-rich shell?
In this work, we discuss the outcomes of the follow-up campaign of SN 2018ijp, discovered as part of the Zwicky Transient Facility survey for optical transients. Its first spectrum shows similarities to broad-lined Type Ic supernovae around maximum light, whereas later spectra display strong signatures of interaction between rapidly expanding ejecta and a dense H-rich circumstellar medium, coinciding with a second peak in the photometric evolution of the transient. This evolution, along with the results of modeling of the first light-curve peak, suggests a scenario where a stripped star exploded within a dense circumstellar medium. The two main phases in the evolution of the transient could be interpreted as a first phase dominated by radioactive decays, and a later interaction-dominated phase where the ejecta collide with a pre-existing shell. We therefore discuss SN 2018jp within the context of a massive star depleted of its outer layers exploding within a dense H-rich circumstellar medium.
79 ASTRONOMY AND ASTROPHYSICS↗
The Carnegie Supernova Project I: Spectroscopic analysis of stripped-envelope supernovae
An analysis leveraging 170 optical spectra of 35 stripped-envelope (SE) core-collapse supernovae (SNe) observed by the Carnegie Supernova Project I and published in a companion paper is presented. Mean template spectra were constructed for the SNe IIb, Ib, and Ic subtypes, and parent ions associated with designated spectral features are identified with the aid of the spectral synthesis code SYNAPPS. Our modeled mean spectra suggest the ~6150 Å feature in SNe IIb may have an underlying contribution due to silicon, while the same feature in some SNe Ib may have an underlying contribution due to hydrogen. Standard spectral line diagnostics consisting of pseudo-equivalent widths (pEWs) and blue-shifted Doppler velocity were measured for each of the spectral features. Correlation matrices and rolling mean values of both spectral diagnostics were constructed. A principle component analysis (PCA) was applied to various wavelength ranges of the entire dataset and suggests clear separation among the different SE SN subtypes, which follows from trends previously identified in the literature. In addition, our findings reveal the presence of two SNe IIb subtypes, a select number of SNe Ib displaying signatures of weak, high-velocity hydrogen, and a single SN Ic with evidence of weak helium features. Our PCA results can be leveraged to obtain robust subtyping of SE SNe based on a single spectrum taken during the so-called photospheric phase, separating SNe IIb from SNe Ib with ~80% completion.
79 ASTRONOMY AND ASTROPHYSICS↗