Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural alignment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

A New Parameter Regime for Dust in Plasma: the Case of Dense and Supersonic Plasma Flows

The co-existence between charged micron-size particulates of matter and plasma electrons and ions can lead to interesting physics phenomena. Some of the most spectacular observations in laboratory low ionized gases include the formation of aligned dust structures, the propagation of dust waves or self-organization leading to dust voids. Here, the dust dynamics is established by the forces of gravity, of electrostatic interaction with electric fields within the plasma, of friction with the neutral gas, and by the Coulomb repulsion between grains. Measurements of dust trajectories have been carried out in situ when the plasma density is about 6-7 orders of magnitude higher than in typical laboratory dusty plasmas, i.e. {approx}10{sup 22} m{sup -3}, and the ion temperature is a few eV. The plasma flows at speeds of the order of 20-60 km/s. Two observed features characterize dust in this new plasma regime: the plasma drag force dominates over all other forces acting on the grains and the microparticles are heated to temperatures sufficiently high, to become self-illuminated. Simultaneous observation at different moments in time of up to a few hundred flying dust grains has been possible due to the timing capabilities of a high-speed camera equipped with a telephoto lens. Dust speed of a few km/s and accelerations of {approx}10{sup 5}-10{sup 6} m/s{sup 2} have been inferred using the time-of-flight technique. Among the applications of hypervelocity dust are local diagnostics performed on hot plasmas, interstellar propulsion or simulation of meteorite impacts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ultralow nonalloyed Ohmic contact resistance to self aligned N-polar GaN high electron mobility transistors by In(Ga)N regrowth

Ultralow Ohmic contact resistance and a self-aligned device structure are necessary to reduce the effect of parasitic elements and obtain higher f{sub t} and f{sub max} in high electron mobility transistors (HEMTs). N-polar (0001) GaN HEMTs, offer a natural advantage over Ga-polar HEMTs, in terms of contact resistance since the contact is not made through a high band gap material [Al(Ga)N]. In this work, we extend the advantage by making use of polarization induced three-dimensional electron-gas through regrowth of graded InGaN and thin InN cap in the contact regions by plasma (molecular beam epitaxy), to obtain an ultralow Ohmic contact resistance of 27 OMEGA mum to a GaN 2DEG.

36 MATERIALS SCIENCE↗

Convective transport by intermittent blob-filaments: Comparison of theory and experiment

A blob-filament (or simply ''blob'') is a magnetic-field-aligned plasma structure which is considerably denser than the surrounding background plasma and highly localized in the directions perpendicular to the equilibrium magnetic field B. In experiments and simulations, these intermittent filaments are often formed near the boundary between open and closed field lines, and seem to arise in theory from the saturation process for the dominant edge instabilities and turbulence. Blobs become charge-polarized under the action of an external force which causes unequal drifts on ions and electrons; the resulting polarization-induced E x B drift moves the blobs radially outwards across the scrape-off-layer (SOL). Since confined plasmas generally are subject to radial or outwards expansion forces (e.g., curvature and {nabla}B forces in toroidal plasmas), blob transport is a general phenomenon occurring in nearly all plasmas. This paper reviews the relationship between the experimental and theoretical results on blob formation, dynamics and transport and assesses the degree to which blob theory and simulations can be compared and validated against experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tensile GaAs(111) quantum dashes with tunable luminescence below the bulk bandgap

Strain-based band engineering in quantum dots and dashes has been predominantly limited to compressively strained systems. However, tensile strain strongly reduces the bandgaps of nanostructures, enabling nanostructures to emit light at lower energies than they could under compressive strain. We demonstrate the self-assembled growth of dislocation-free GaAs quantum dashes on an InP(111)B substrate, using a 3.8% tensile lattice-mismatch. Due to the high tensile strain, the GaAs quantum dashes luminesce at 110–240 meV below the bandgap of bulk GaAs. The emission energy is readily tuned by adjusting the size of the quantum dashes via deposition thickness. Tensile self-assembly creates new opportunities for engineering the band alignment, band structure, and optical properties of epitaxial nanostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Vortices at the magnetic equator generated by hybrid Alfvén resonant waves

We performed three-dimensional magnetohydrodynamic simulations of shear Alfvén waves in a full field line system with magnetosphere-ionosphere coupling and plasma non-uniformities. Feedback instability of the Alfvén resonant modes showed various nonlinear features under the field line cavities: (i) a secondary flow shear instability occurs at the magnetic equator, (ii) trapping of the ionospheric Alfvén resonant modes facilitates deformation of field-aligned current structures, and (iii) hybrid Alfvén resonant modes grow to cause vortices and magnetic oscillations around the magnetic equator. Essential features in the initial brightening of auroral arc at substorm onsets could be explained by the dynamics of Alfvén resonant modes, which are the nature of the field line system responding to a background rapid change.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electrical properties of Mg doped ZnO nanostructure annealed at different temperature

In this work, ZincOxide (ZnO) nanostructures doped with Mg were successfully grown on the glass substrate. Magnesium (Mg) metal element was added in the ZnO host which acts as a doping agent. Different temperature in range of 250°C to 500°C was used in order to investigate the effect of annealing temperature of ZnO thin films. Field Emission Scanning Electron Microscopy (FESEM) was used to investigate the physical characteristic of ZnO thin films. FESEM results have revealed that ZnO nanorods were grown vertically aligned. The structural properties were determined by using X-Ray Diffraction (XRD) analysis. XRD results showed Mg doped ZnO thin have highest crystalinnity at 500°C annealing temperature. The electrical properties were investigating by using Current-Voltage (I-V) measurement. I-V measurement showed the electrical properties were varied at different annealing temperature. The annealing temperature at 500°C has the highest electrical conductance properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural Basis for Small G Protein Effector Interaction of Ras-related Protein 1 (Rap1) and Adaptor Protein Krev Interaction Trapped 1 (KRIT1)

Cerebral cavernous malformations (CCMs) affect 0.1-0.5% of the population resulting in leaky vasculature and severe neurological defects. KRIT1 (Krev interaction trapped-1) mutations associate with {approx}40% of familial CCMs. KRIT1 is an effector of Ras-related protein 1 (Rap1) GTPase. Rap1 relocalizes KRIT1 from microtubules to cell membranes to impact integrin activation, potentially important for CCM pathology. We report the 1.95 {angstrom} co-crystal structure of KRIT1 FERM domain in complex with Rap1. Rap1-KRIT1 interaction encompasses an extended surface, including Rap1 Switch I and II and KRIT1 FERM F1 and F2 lobes. Rap1 binds KRIT1-F1 lobe using a GTPase-ubiquitin-like fold interaction but binds KRIT1-F2 lobe by a novel interaction. Point mutagenesis confirms the interaction. High similarity between KRIT1-F2/F3 and talin is revealed. Additionally, the mechanism for FERM domains acting as GTPase effectors is suggested. Finally, structure-based alignment of each lobe suggests classification of FERM domains as ERM-like and TMFK-like (talin-myosin-FAK-KRIT-like) and that FERM lobes resemble domain 'modules.'

59 BASIC BIOLOGICAL SCIENCES↗

THE SIGNATURE OF THE WARM-HOT INTERGALACTIC MEDIUM IN WMAP AND THE FORTHCOMING PLANCK DATA

We compute the cross-correlation between the Warm-Hot Intergalactic Medium and maps of cosmic microwave background temperature anisotropies using a log-normal probability density function to describe the weakly nonlinear matter density field. We search for this contribution in the data measured by the Wilkinson Microwave Anisotropy Probe. We use a template of projected matter density reconstructed from the Two-Micron All-Sky Redshift Survey as a tracer of the electron distribution. The spatial distribution of filaments is modeled using the recently developed Augmented Lagrangian Perturbation Theory. On the scales considered here, the reconstructed density field is very well described by the assumed log-normal distribution function. We predict that the cross-correlation will have an amplitude of 0.03-0.3 {mu}K. The measured value is close to 1.5 {mu}K, compatible with random alignments between structure in the template and in the temperature anisotropy data. Using the W1 Differencing Assembly to remove this systematic gives a residual correlation dominated by Galactic foregrounds. Planck could detect the Warm-Hot Medium if it is well traced by the density field reconstructed from galaxy surveys. The 217 GHz channel will allow to eliminate spurious contributions and its large frequency coverage can show the sign change from the Rayleigh-Jeans to the Wien part of the spectrum, characteristic of the thermal Sunyaev-Zel'dovich effect.

79 ASTRONOMY AND ASTROPHYSICS↗

Nuclear magnetic resonance investigation of superconducting and normal state Nb 3 Sn

The superconductor Nb3Sn has important applications for construction of very high-field superconducting magnets. In this work we investigate its microscopic electronic structure with 93 Nb nuclear magnetic resonance (NMR). The high-quality Nb 3 Sn powder sample was studied in both 3.2 T and 7 T magnetic fields in the temperature range from 4 K to 300 K. From measurement of the spectrum and its theoretical analysis, we find evidence for anisotropy despite its cubic crystal structure. Magnetic alignment of the powder grains in the superconducting state was also observed. The Knight shift and spin-lattice relaxation rate, T 1 -1 , were measured and the latter compared with BCS theory for the energy gap Δ(0) = 2.7 ± 0.3k B T c at 3.2 T and Δ(0) = 2.33 ± 0.07 k B T c at 7 T, indicating suppression of the order parameter by magnetic field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

EVOLUTION OF A MAGNETIC FLUX ROPE AND ITS OVERLYING ARCADE BASED ON NONLINEAR FORCE-FREE FIELD EXTRAPOLATIONS

Dynamic phenomena indicative of slipping reconnection and magnetic implosion were found in a time series of nonlinear force-free field (NLFFF) extrapolations for the active region 11515, which underwent significant changes in the photospheric fields and produced five C-class flares and one M-class flare over five hours on 2012 July 2. NLFFF extrapolation was performed for the uninterrupted 5 hour period from the 12 minute cadence vector magnetograms of the Helioseismic and Magnetic Imager on board the Solar Dynamic Observatory. According to the time-dependent NLFFF model, there was an elongated, highly sheared magnetic flux rope structure that aligns well with an Hα filament. This long filament splits sideways into two shorter segments, which further separate from each other over time at a speed of 1-4 km s{sup –1}, much faster than that of the footpoint motion of the magnetic field. During the separation, the magnetic arcade arching over the initial flux rope significantly decreases in height from ∼4.5 Mm to less than 0.5 Mm. We discuss the reality of this modeled magnetic restructuring by relating it to the observations of the magnetic cancellation, flares, a filament eruption, a penumbra formation, and magnetic flows around the magnetic polarity inversion line.

79 ASTRONOMY AND ASTROPHYSICS↗

Improving best-phase image quality in cardiac CT by motion correction with MAM optimization

Purpose: Research in image reconstruction for cardiac CT aims at using motion correction algorithms to improve the image quality of the coronary arteries. The key to those algorithms is motion estimation, which is currently based on 3-D/3-D registration to align the structures of interest in images acquired in multiple heart phases. The need for an extended scan data range covering several heart phases is critical in terms of radiation dose to the patient and limits the clinical potential of the method. Furthermore, literature reports only slight quality improvements of the motion corrected images when compared to the most quiet phase (best-phase) that was actually used for motion estimation. In this paper a motion estimation algorithm is proposed which does not require an extended scan range but works with a short scan data interval, and which markedly improves the best-phase image quality. Methods: Motion estimation is based on the definition of motion artifact metrics (MAM) to quantify motion artifacts in a 3-D reconstructed image volume. The authors use two different MAMs, entropy, and positivity. By adjusting the motion field parameters, the MAM of the resulting motion-compensated reconstruction is optimized using a gradient descent procedure. In this way motion artifacts are minimized. For a fast and practical implementation, only analytical methods are used for motion estimation and compensation. Both the MAM-optimization and a 3-D/3-D registration-based motion estimation algorithm were investigated by means of a computer-simulated vessel with a cardiac motion profile. Image quality was evaluated using normalized cross-correlation (NCC) with the ground truth template and root-mean-square deviation (RMSD). Four coronary CT angiography patient cases were reconstructed to evaluate the clinical performance of the proposed method. Results: For the MAM-approach, the best-phase image quality could be improved for all investigated heart phases, with a maximum improvement of the NCC value by 100% and of the RMSD value by 81%. The corresponding maximum improvements for the registration-based approach were 20% and 40%. In phases with very rapid motion the registration-based algorithm obtained better image quality, while the image quality of the MAM algorithm was superior in phases with less motion. The image quality improvement of the MAM optimization was visually confirmed for the different clinical cases. Conclusions: The proposed method allows a software-based best-phase image quality improvement in coronary CT angiography. A short scan data interval at the target heart phase is sufficient, no additional scan data in other cardiac phases are required. The algorithm is therefore directly applicable to any standard cardiac CT acquisition protocol.

60 APPLIED LIFE SCIENCES↗

Structure and Characterization of Vertically Aligned Single-Walled Carbon Nanotube Bundles

Arrays of vertically aligned single-walled carbon nanotube bundles, SWCNTs, have been synthesized by simple alcohol catalytic chemical vapor deposition process, carried out at 800 ° C . The formed SWCNTs are organized in small groups perpendicularly aligned and attached to the substrate. These small bundles show a constant diameter of ca. 30 nm and are formed by the adhesion of no more than twenty individual SWCNTs perfectly aligned along their length.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Deployable UHV Pump

This project presents an external motorized actuation system for a deployable ultra-high vacuum (UHV) pump, enabling internal motion without compromising vacuum conditions. All active components remain external due to environmental and space constraints. A motor-driven mechanical feedthrough transfers motion into the pump, supported by a modular, adjustable mounting system that maintains alignment and integrates with existing hardware. CAD modeling and iterative design were used to refine geometry and ensure proper fit. The final design reliably transfers motion while maintaining alignment and structural integrity. Its adjustability improves installation and maintenance, demonstrating a practical solution for actuation in UHV systems.

Remington, Austin [Northern Illinois U.]↗

The magnetic furnace: intense core dynamos in B stars

The dynamo action achieved in the convective cores of main-sequence massive stars is explored here through three-dimensional (3D) global simulations of convective core dynamos operating within a young 10 M{sub ⊙} B-type star, using the anelastic spherical harmonic code. These simulations capture the inner 65% of this star by radius, encompassing the convective nuclear-burning core (about 23% by radius) and a portion of the overlying radiative envelope. Eight rotation rates are considered, ranging from 0.05% to 16% of the surface breakup velocity, thereby capturing both convection that barely senses the effects of rotation and other situations in which the Coriolis forces are prominent. The vigorous dynamo action realized within all of these turbulent convective cores builds magnetic fields with peak strengths exceeding a megagauss, with the overall magnetic energy (ME) in the faster rotators reaching super-equipartition levels compared to the convective kinetic energy (KE). The core convection typically involves turbulent columnar velocity structures roughly aligned with the rotation axis, with magnetic fields threading through these rolls and possessing complex linkages throughout the core. The very strong fields are able to coexist with the flows without quenching them through Lorentz forces. The velocity and magnetic fields achieve such a state by being nearly co-aligned, and with peak magnetic islands being somewhat displaced from the fastest flows as the intricate evolution proceeds. As the rotation rate is increased, the primary force balance shifts from nonlinear advection balancing Lorentz forces to a magnetostrophic balance between Coriolis and Lorentz forces.

79 ASTRONOMY AND ASTROPHYSICS↗

High-velocity bipolar molecular emission from an AGN torus

We have detected in ALMA observations CO J=6→5 emission from the nucleus of the Seyfert galaxy NGC 1068. The low-velocity (up to ±70 km s{sup −1} relative to systemic) CO emission resolves into a 12 × 7 pc structure, roughly aligned with the nuclear radio source. Higher-velocity emission (up to ±400 km s{sup −1}) is consistent with a bipolar outflow in a direction nearly perpendicular (≃80°) to the nuclear disk. The position–velocity diagram shows that in addition to the outflow, the velocity field may also contain rotation about the disk axis. These observations provide compelling evidence in support of the disk-wind scenario for the active galactic nucleus obscuring torus.

79 ASTRONOMY AND ASTROPHYSICS↗

Training manual on optical alignment instruments

Training Manual RQA/M5 provides a basic course of instruction in the use of optical instruments for precise dimensional control and alignment of structural elements and assemblies, such as associated with space vehicles, aircraft, ships, and buildings.

Source record↗

Shape of two-dimensional solidification interface during directional solidification by continuous casting

An analysis was made of the two-dimensional solidification of an ingot being cooled and withdrawn vertically downward from a mold consisting of parallel walls of finite length. Heat transfer analysis shows how the flatness of the interface is related to the ingot thickness, the withdrawal rate, the heat addition from the superheated liquid metal, and the temperature difference available for cooling. This provides an understanding of the conditions that will yield a maximum rate of casting while achieving the desired flatness of the interface. The results are interpreted with respect to the conditions for obtaining an aligned eutectic structure by directional solidification. In this process an additional constraint must be included that relates the ingot withdrawal rate and the heat transfer rate from the liquid metal to the solidification interface.

Siegel, R.↗