Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface assembly”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Size controlled synthesis of SnO2 and its electrostatic self- assembly over reduced graphene oxide for photocatalyst and supercapacitor application

Highlights: • The influence of pH, reaction time and temperature over the control of size of the spheres of SnO{sub 2} by hydrothermal method and further assembly over reduced graphene oxide has been carried out in this report. • The modification of SnO{sub 2} via (3- amino propyl triethoxysilane) makes the electrostatic self- assembly between the positively charged SnO{sub 2} nanostructure and the negatively charged graphene oxide (GO). • The impacts of concentration of GO added to SnO{sub 2} nanostructures and its significance on the morphology and the capacitive property of SnO{sub 2}/rGO composite are evaluated. • The functionalization of graphene enhances the capacitance as well as provides anchoring sites for the decoration by metal oxide nanostructures. - Abstract: Hydrothermally-synthesized, size and shape-controlled SnO{sub 2} nanospheres were electrostatically self-assembled over the surface of reduced graphene oxide (rGO). The control over decoration of SnO{sub 2} nanospheres on rGO was studied by microscopic analysis and the crystallographic structure of SnO{sub 2} hybrid nanocomposites (SnO{sub 2}: rGO) was determined from X-Ray diffraction analysis (XRD). Hybrid nanocomposite in 1:3 ratio exhibited (i) excellent methylene blue degradation capability within 3 min under visible light condition and (ii) high specific capacitance of 337.52 F/g at 0.5 A/g in 1 M H{sub 2}SO{sub 4} electrolyte with 89% of retention after 5000 cycles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Predicting Dexter Energy Transfer Interactions from Molecular Orbital Overlaps

Dexter energy transfer (DET), also known as spin forbidden energy transfer (e.g., 3 D 1 A → 1 D 3 A), is undergoing renewed interest because of its utility in energy science, photocatalysis, and biomedical imaging. The DET reactions enable exciton fission and fusion and have been recently used to facilitate nanoscale imaging of protein assemblies on cell surfaces. While DET and Förster energy transfer rates are often well described using Fermi’s golden rule, the donor–acceptor couplings for DET may be bridge-state-mediated and depend on the electronic structure of and interactions among the donor, bridge, and acceptor. We provide a simple approach to approximate DET couplings using a product of molecular orbital overlap factors. This approach may be used to guide the design of DET systems with targeted energy-transfer kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-Assembled Monolayers of an Azobenzene Derivative on Silica and Their Interactions with Lysozyme

The capability of the photoresponsive isomerization of azobenzene derivatives in self-assembled monolayer (SAM) surfaces to control protein adsorption behavior has very promising applications in antifouling materials and biotechnology. In this study, we performed an atomistic molecular dynamics (MD) simulation in combination with free-energy calculations to study the morphology of azobenzene-terminated SAMs (Azo-SAMs) grafted on a silica substrate and their interactions with lysozyme. Results show that the Azo-SAM surface morphology and the terminal benzene rings’ packing are highly correlated with the surface density and the isomer state. Higher surface coverage and the trans-isomer state lead to a more ordered polycrystalline backbone as well as more ordered local packing of benzene rings. On the Azo-SAM surface, water retains a high interfacial diffusivity, whereas the adsorbed lysozyme is found to have extremely low mobility but a relative stable secondary structure. The moderate desorption free energy (~60 kT) from the trans-Azo-SAM surface was estimated by using both the nonequilibrium-theorem-based Jarzynski’s equality and equilibrium umbrella sampling.

Chemistry↗

Stability of Ligands on Nanoparticles Regulating the Integrity of Biological Membranes at the Nano–Lipid Interface

When nanoparticles interact with cellular or organelle membranes, the coating ligands are known to affect the integrity of the membranes, which regulate cell death and inflammation. However, the molecular mechanisms of this modulation remain unresolved. Here, we use synchrotron X-ray liquid surface scattering and molecular dynamics simulations to study interface structures between phospholipids and gold nanorods (AuNRs) coated by surfactant and polyelectrolyte. These ligands are two types of widely used surface modification with different self-assembled structures and stabilities on the surface of nanoparticles. We reveal distinct mechanisms of the ligand stability in disrupting membrane integrity. We find that cationic surfactant ligand cetyltrimethylammonium bromide (CTAB) detaches from AuNRs and inserts into phospholipids, resulting in reduced membrane thickness by compressing the phospholipids to align with the shorter ligand. Conversely, the cationic polyelectrolyte ligand poly(diallyldimethylammonium chloride) (PDC) is more stable on AuNRs; although it adsorbs onto the membrane, it does not cause much impairment. The distinct coating ligand interactions with phospholipids are further verified by cellular responses including impaired lysosomal membranes and triggered inflammatory effects in macrophages. Together, the quantitative analysis of interface structures elucidates key bio-nano interactions and highlights the importance of surface ligand stability for safety and rational design of nanoparticles.

59 BASIC BIOLOGICAL SCIENCES↗

Direct Observation of the Orientational Anisotropy of Buried Hydroxyl Groups inside Muscovite Mica

Muscovite mica (001) is a widely-used model surface for controlling molecular assembly and a common substrate for environmental adsorption processes. The mica (001) surface displays near trigonal symmetry, but many molecular adsorbates — including water — exhibit unequal probabilities of alignment along its three nominally equivalent lattice directions. Buried hydroxyl groups within the muscovite structure are speculated to be responsible, but direct evidence is lacking. Here we utilize vibrational sum frequency generation spectroscopy (vSFG) to characterize the orientation and hydrogen-bonding environment of near-surface hydroxyls inside mica. Multiple distinct peaks are detected in the O-H stretch region, which we attribute to Si/Al substitution in the SiO4 tetrahedron and K+ ion adsorption above the hydroxyls based on density functional theory simulations. Our findings demonstrate that vSFG can identify the absolute orientation of –OH groups and hence the surface termination at a mica surface, providing a means to investigate how –OH groups influence molecular adsorption and better understand mica stacking-sequences and physical behavior.

Tuladhar, Aashish↗

Neutron Reflectometry Studies of the Adsorbed Structure of the Amelogenin, LRAP

Amelogenins make up over 90 percent of the protein present during enamel formation and have been demonstrated to be critical in proper enamel development, but the mechanism governing this control is not well understood. Leucine-rich amelogenin peptide (LRAP) is a 59-residue splice variant of amelogenin and contains the charged regions from the full protein thought to control crystal regulation. In this work, we utilized neutron reflectivity (NR) to investigate the structure and orientation of LRAP adsorbed from solutions onto molecularly smooth COOH-terminated self-assembled monolayers (SAMs) surfaces. Sedimentation velocity experiments revealed that LRAP is primarily a monomer in saturated calcium phosphate (SCP) solutions (0.15 M NaCl) at pH 7.4. LRAP adsorbed as ~33 Å thick layers at ~70% coverage as determined by NR. Rosetta simulations of the dimensions of LRAP in solution (37 Å diameter) indicate that the NR determined z dimension is consistent with an LRAP monomer. Sedimentation velocity experiments and Rosetta simulation show that the LRAP monomer has an extended, asymmetric shape in solution. The NR data suggests that the protein is not completely extended on the surface, having some degree of structure away from the surface. A protein orientation with the C-terminal and inner N-terminal region (~8-24)) located near the surface is consistent with the higher scattering length density (SLD) and higher protein hydration found near the surface by NR. This work presents new information on the tertiary and quaternary structure of LRAP in solution and adsorbed onto surfaces. It also presents further evidence that the monomeric species may be an important functional form of amelogenin proteins.

amelogenin, enamel, LRAP, biomineralization, neutr↗

Controlling the Charge State and Redox Properties of Supported Polyoxometalates via Soft Landing of Mass Selected Ions

We investigate the controlled deposition of Keggin polyoxometalate (POM) anions, PMo12O403- and PMo12O402-, onto different self-assembled monolayer (SAM) surfaces via soft landing of mass-selected ions. Utilizing in situ infrared reflection absorption spectroscopy (IRRAS), ex situ cyclic voltammetry (CV) and electronic structure calculations, we examine the structure and charge retention of supported multiply-charged POM anions and characterize the redox properties of the modified surfaces. SAMs of alkylthiol (HSAM), perfluorinated alkylthiol (FSAM), and alkylthiol terminated with NH3+ functional groups (NH3+SAM) are chosen as model substrates for soft landing to examine the factors which influence the immobilization and charge retention of multiply charged anionic molecules. The distribution of charge states of POMs on different SAM surfaces are determined by comparing the IRRAS spectra with vibrational spectra calculated using density functional theory (DFT). In contrast to the results obtained previously for multiply charged cations, soft landed anions are found to retain charge on all three SAM surfaces. This charge retention is attributed to the substantial electron binding energy of the POM anions. Investigation of redox properties by CV reveals that, while surfaces prepared by soft landing exhibit similar features to those prepared by adsorption of POM from solution, the soft landed POM2- has a pronounced shift in oxidation potential compared to POM3- for one of the redox couples. These results demonstrate that ion soft landing is uniquely suited for precisely controlled preparation of substrates with specific electronic and chemical properties that cannot be achieved using conventional deposition techniques.

charge retention↗

Dynamin GTPase Regulation is Altered by PH Domain Mutations Found in Centronuclear Myopathy Patients

The large GTPase dynamin has an important membrane scission function in receptor-mediated endocytosis and other cellular processes. Self-assembly on phosphoinositide-containing membranes stimulates dynamin GTPase activity, which is crucial for its function. Although the pleckstrin-homology (PH) domain is known to mediate phosphoinositide binding by dynamin, it remains unclear how this promotes activation. Here, we describe studies of dynamin PH domain mutations found in centronuclear myopathy (CNM) that increase dynamin's GTPase activity without altering phosphoinositide binding. CNM mutations in the PH domain C-terminal {alpha}-helix appear to cause conformational changes in dynamin that alter control of the GTP hydrolysis cycle. These mutations either 'sensitize' dynamin to lipid stimulation or elevate basal GTPase rates by promoting self-assembly and thus rendering dynamin no longer lipid responsive. We also describe a low-resolution structure of dimeric dynamin from small-angle X-ray scattering that reveals conformational changes induced by CNM mutations, and defines requirements for domain rearrangement upon dynamin self-assembly at membrane surfaces. Our data suggest that changes in the PH domain may couple lipid binding to dynamin GTPase activation at sites of vesicle invagination.

59 BASIC BIOLOGICAL SCIENCES↗

Nanoscale Turing patterns in a bismuth monolayer

Turing’s reaction–diffusion theory of morphogenesis has been very successful for understanding macroscopic patterns within complex objects ranging from biological systems to sand dunes. However, Turing patterns on microscopic length scales are extremely rare. Here we show that a strained atomic bismuth monolayer assembled on the surface of NbSe 2 —and subject to interatomic interactions and kinetics—displays Turing patterns. Our reaction–diffusion model produces stripe patterns with a period of five atoms (approximately 2 nm) and domain walls with Y-shaped junctions that bear a striking resemblance to what has been experimentally observed. Our work establishes that Turing patterns can occur at the atomic scale in a hard condensed-matter setting.

36 MATERIALS SCIENCE↗

One-step electrochemical deposition of prussian blue-multiwalled carbon nanotube nanocomposite thin-film: preparation, characterization and evaluation for H2O2 sensing

Prussian blue-multiwalled carbon nanotube-modified gold (PB-MWCNT/Au) electrodes were successfully fabricated using the electrochemical co-deposition method in which the MWCNTs not only act as a carrier of PB, but also as a modifier for a catalytic function. Fourier transform infrared proved that PB assembled on the surface of MWCNTs through electrochemical co-deposition. Scanning electron microscopy images showed that a relatively porous PB-MWCNT film was formed. Cyclic voltammetry and electrochemical impedance spectroscopy revealed that a PB-coated MWCNTs composite film improved electron and ion transfer relative to pure PB films and also exhibited larger electrode-specific capacitance than PB alone. Compared with PB film, the PB-MWCNT composite film showed a larger response current to the reduction of H2O2 because of the synergistic effects between the MWCNTs and PB particles.

36 MATERIALS SCIENCE↗

Graphene oxide modified TiO 2 nanotube arrays: enhanced visible light photoelectrochemical properties

Novel nanocomposite films based on graphene oxide (GO) and TiO 2 nanotube arrays were synthesized by assembling GO on the surface of self-organized TiO 2 nanotube arrays through a simple assembling method. The composite films were characterized with field emission scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and UV-vis diffuse reflectance spectroscopy. Photoelectrochemical properties of the composite nanotube arrays were investigated under visible light illumination. Remarkably enhanced visible light photoelectrochemical response was observed for the GO decorated TiO 2 nanotube composite electrode compared with pristine TiO 2 nanotube arrays. Sensitizing effect of GO on the photoelectrochemical response of TiO 2 nanotube arrays was demonstrated and about 15 times enhanced maximum photoconversion efficiency was obtained with the presence of GO. Enhanced photocatalytic activity of TiO 2 nanotube arrays towards degradation of methyl blue was also demonstrated after modification of GO. The results presented here demonstrate GO to be efficient for the improvement of utilization of visible light for TiO 2 nanotube arrays.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Test beam measurement of ams H35 HV-CMOS capacitively coupled pixel sensor prototypes with high-resistivity substrate

In the context of the studies of the ATLAS High Luminosity LHC programme, radiation tolerant pixel detectors in CMOS technologies are investigated. To evaluate the effects of substrate resistivity on CMOS sensor performance, the H35DEMO demonstrator, containing different diode and amplifier designs, was produced in ams H35 HV-CMOS technology using four different substrate resistivities spanning from 80 cm to 1000 cm. A glueing process using a high-precision flip-chip machine was developed in order to capacitively couple the sensors to FE-I4 Readout ASIC using a thin layer of epoxy glue with good uniformity over a large surface. The resulting assemblies were measured in beam test at the Fermilab Test Beam Facilities with 120 GeV protons and CERN SPS H8 beamline using 180 GeV pions. Furthermore, the in-time efficiency and tracking properties measured for the different sensor types are shown to be compatible with the ATLAS ITk requirements for its pixel sensors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Controlling thermal conductance through quantum dot roughening at interfaces

We examine the fundamental phonon mechanisms affecting the interfacial thermal conductance across a single layer of quantum dots (QDs) on a planar substrate. We synthesize a series of Ge x Si 1 - x QDs by heteroepitaxial self-assembly on Si surfaces and modify the growth conditions to provide QD layers with different root-mean-square (rms) roughness levels in order to quantify the effects of roughness on thermal transport. We measure the thermal boundary conductance ( h K ) with time-domain thermoreflectance. The trends in thermal boundary conductance show that the effect of the QDs on h K are more apparent at elevated temperatures, while at low temperatures, the QD patterning does not drastically affect h K . The functional dependence of h K with rms surface roughness reveals a trend that suggests that both vibrational mismatch and changes in the localized phonon transport near the interface contribute to the reduction in h K . We find that QD structures with rms roughnesses greater than 4 nm decrease h K at Si interfaces by a factor of 1.6. We develop an analytical model for phonon transport at rough interfaces based on a diffusive scattering assumption and phonon attenuation that describes the measured trends in h K . This indicates that the observed reduction in thermal conductivity in SiGe quantum dot superlattices is primarily due to the increased physical roughness at the interfaces, which creates additional phonon resistive processes beyond the interfacial vibrational mismatch.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and characterization of low-dimensional N-heterocyclic carbene lattices

The covalent interaction of N-heterocyclic carbenes (NHCs) with transition metal atoms gives rise to distinctive frontier molecular orbitals (FMOs). These emergent electronic states have spurred the widespread adoption of NHC ligands in chemical catalysis and functional materials. Although formation of carbene-metal complexes in self-assembled monolayers on surfaces has been explored, design and electronic structure characterization of extended low-dimensional NHC-metal lattices remains elusive. Here, in this work, we demonstrate a modular approach to engineering one-dimensional (1D) metal-organic chains and two-dimensional (2D) Kagome lattices using the FMOs of NHC–Au–NHC junctions to create low-dimensional molecular networks exhibiting intrinsic metallicity. Scanning tunneling spectroscopy and first-principles density functional theory reveal the contribution of C–Au–C π-bonding states to dispersive bands that imbue 1D- and 2D-NHC lattices with exceptionally small work functions.

Qie, Boyu↗

Colony organization in the green alga Botryococcus braunii is specified by a complex extracellular matrix

Botryococcus braunii is a colonial green alga whose cells associate via a complex extracellular matrix (ECM) and produce prodigious amounts of liquid hydrocarbons that can be readily converted into conventional combustion engine fuels. We used quickfreeze deep-etch electron microscopy and biochemical/histochemical analysis to elucidate many new features of B. braunii cell/colony organization and composition. Intracellular lipid bodies associate with the chloroplast and endoplasmic reticulum (ER) but show no evidence of being secreted. The ER displays striking fenestrations and forms a continuous subcortical system in direct contact with the cell membrane. The ECM has three distinct components. (i) Each cell is surrounded by a fibrous β-1, 4- and/or β-1, 3-glucan-containing cell wall. (ii) The intracolonial ECM space is filled with a cross-linked hydrocarbon network permeated with liquid hydrocarbons. (iii) Colonies are enclosed in a retaining wall festooned with a fibrillar sheath dominated by arabinose-galactose polysaccharides, which sequesters ECM liquid hydrocarbons. Each cell apex associates with the retaining wall and contributes to its synthesis. Retaining-wall domains also form "drapes" between cells, with some folding in on themselves and penetrating the hydrocarbon interior of a mother colony, partitioning it into daughter colonies. In addition, we propose that retaining-wall components are synthesized in the apical Golgi apparatus, delivered to apical ER fenestrations, and assembled on the surfaces of apical cell walls, where a proteinaceous granular layer apparently participates in fibril morphogenesis. We further propose that hydrocarbons are produced by the nonapical ER, directly delivered to the contiguous cell membrane, and pass across the nonapical cell wall into the hydrocarbon-based ECM.

09 BIOMASS FUELS↗

Super-Sensitive and Robust Biosensors from Supported Polymer Bilayers

Biological organisms are potentially the most sensitive and selective biological detection systems known, yet we are currently severely limited in our ability to exploit biological interactions in sensory devices, due in part to the limited stability of biological systems and derived materials. This proposal addresses an important aspect of integrating biological sensory materials in a solid state device. If successful, such technology could enable entirely new classes of robust biosensors that could be miniaturized and deployed in the field. The critical aims of the proposed work were 1) the calibration of a more versatile approach to measuring pH, 2) the use of this method to monitor pH changes caused by the light-induced pumping of protons across vesicles with bacteriorhodopsin integrated into the membranes (either polymer or lipid); 3) the preparation of bilayer assemblies on platinum surfaces; 4) the enhanced detection of lightinduced pH changes driven by bR-loaded supported bilayers. I have developed a methodology that may enable that at interfaces and developed a methodology to characterize the functionality of bilayer membranes with reconstituted membrane proteins. The integrity of the supported bilayer films however must be optimized prior to the full realization of the work originally envisioned in the original proposal. Nevertheless, the work performed on this project and the encouraging results it has produced has demonstrated that these goals are challenging yet within reach.

36 MATERIALS SCIENCE↗

Big Area Additive Manufacturing Engineering Development, Process Trials, and Composite Core Fabrication (CRADA NFE-17-06827 Final Report)

Oak Ridge National Laboratory (ORNL) has worked with Raytheon to develop and test the materials necessary to produce a moderately sized boat using Big Area Additive Manufacturing (BAAM). This Phase 2 project focused on printing and testing the components of the boat designed by Raytheon. This involved collaborating on boat design, printing the boat, testing surface coatings, and assembling the boat.

36 MATERIALS SCIENCE↗