Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface features”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Microscopic Scattering Approach to In-Gap States

We develop a microscopic scattering formalism to describe Yu-Shiba-Rusinov (YSR) states due to a single Cr adatom on the Bi-terminated surface of beta Bi2Pd, by combining ab initio Wannier functions with a real-space Green's function approach in the Bogoliubov-de Gennes formalism[1]. Our framework reproduces key scanning tunneling spectroscopy features, including a single particle-hole asymmetric YSR peak and isotropic dIdV maps around the impurity. Decomposing the YSR states reveals contributions from four nearly degenerate C4v representations, with energy broadening masking their individual signatures. Spin-orbit coupling induces partial spin polarization, while the spatial asymmetry between particle and hole components arises from Cr d-Bi p hybridization. These results highlight the importance of realistic band structures and microscopic modeling for interpreting STM data for magnetic in-gap states on superconductors. Further advances examining layered 2D material surfaces, such as NbSe2, will be described[2]. For this system the superconducting properties are obtained from a full anisotropic Eliashberg calculation of the superconducting order parameter along with the charge density wave gap. Additional features associated with proposals to measure the dynamics of these individual YSR states will be presented. [1] arXiv:2507.08740 [2] arXiv:2507.11856

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Single-molecule reaction mapping uncovers diverse behaviours of electrocatalytic surface Pd–H intermediates

Many vital electrocatalytic transformations hinge on reactive surface metal–hydrogen intermediates (M–H*), yet the low concentration and transient nature of such intermediates present formidable challenges to in-depth investigation. Here we use single-molecule super-resolution reaction imaging to directly probe surface palladium–hydrogen (Pd–H*) intermediates on individual palladium nanocubes during electrocatalytic hydrogen evolution. Our approach visualizes hydrogen spillover from palladium to the surrounding substrate surface over hundreds of nanometres away and dissects substantial inter- and intraparticle heterogeneity. Through Gaussian-broadening kinetic analysis, we reveal that ensemble-averaged measurements systematically overestimate the stability of Pd–H*. Moreover, we resolve three subpopulations of palladium nanocubes with distinct reactivity features, uncovering critical correlations between intermediate stability, hydrogenation reactivity and transition-state properties. Finally, our findings highlight the necessity of single-particle resolution for capturing the intrinsic complexity of electrocatalysts; our approach is also broadly applicable to interrogate surface-reactive intermediates across a wide array of electrocatalytic pathways.

electrocatalysis↗
DOE OSTI2024

Silicon Nitride Surface Enabled Propane Dehydrogenation Catalyzed by Supported Organozirconium

Mesoporous silicon nitride (Si 3 N 4 ) is a nontraditional support for the chemisorption of organometallic complexes with the potential for enhancing catalytic activity through features such as the increased Lewis basicity of nitrogen for heterolytic bond activation, increased ligand donor strength, and metal–ligand orbital overlap. In this report tetrabenzyl zirconium (ZrBn 4 ) was chemisorbed on Si 3 N 4 , and the resulting supported organometallic species was characterized by Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS), Dynamic Nuclear Polarization-enhanced Solid State Nuclear Magnetic Resonance (DNP-SSNMR), and X-ray Absorption Spectroscopy (XAS). Based on the hypothesis that the nitride might enable facile heterolytic C–H bond activation along the Zr–N bond, this material was found to be a highly active (1.53 mol propene mol Zr –1 h –1 at 450 °C) and selective (99% to propylene) catalyst for propane dehydrogenation. In contrast, the homologous silica supported complex exhibited negligible activity under these conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Secondary electron emission for reticulated carbon foam surfaces using direct measurements and spectroscopic analysis

This study investigates secondary electron emission (SEE) characteristics of reticulated foams using direct measurements and analytical modeling. Total SEE was quantified, revealing suppression of up to 44% in carbon foam structures compared to planar graphite surfaces. An optimal geometric configuration was identified and supported by analytical models. SEE angular dependence experiments showed diverse behaviors: fiber-like behavior and directional dependence for pore and ligaments on the mm scale, with fuzz-like characteristics when the foam features are between 10–100 µm. Electron energy analyzer measurements showed that carbon foams preferentially suppress inelastic backscattered electrons (BSEs) more so than true secondary electrons (SEs). The analysis indicated a larger fraction of low-energy SE generation in foams compared to flat surfaces due to increased emission from curved fiber ligaments and tertiary SEs from high-energy BSEs. These findings have implications for design and optimization of materials with tailored electron emission properties for applications like plasma-facing components, spacecraft materials, and accelerator surfaces.

Auger↗
DOE OSTI2025

Zwitterionic Photocurable Resin for High‐Resolution 3D Printing of Ultralow‐Fouling Microstructures

High‐resolution 3D printing technologies are enabling a new generation of microstructured materials for applications where biocompatibility is critical. However, most conventional 3D‐printable resins yield materials that exhibit trade‐offs between antifouling properties and mechanical robustness, limiting their applicability in living systems. In nature, zwitterionic surface groups form tightly bound hydration layers that act as effective barriers against protein and cell attachment. Inspired by this strategy, a zwitterionic acrylamide‐based photoresist—carboxybetaine di‐methacrylamide (CBDA)—is developed for projection‐based vat photopolymerization, enabling the fabrication of complex microarchitectures with exceptional antifouling properties. The bifunctional monomer allows the formation of dense, cross‐linked networks that resist swelling while maintaining a high density of zwitterionic groups. Printed structures exhibit strong resistance to protein and cell adhesion, as confirmed by porcine blood assays, alongside robust mechanical performance. As a demonstration, a tubular structure featuring a negative Poisson's ratio lattice is printed to showcase structural fidelity and versatility. This resin formulation offers a broadly applicable strategy for fabricating microscale devices and surfaces where antifouling performance and structural integrity are both essential—spanning biomedical interfaces, soft robotics, and beyond.

3D printing↗
DOE OSTI2025

Nodal hybridization in a two-dimensional heavy-fermion material

Metals with partially filled core atomic shells can form quasiparticles at a low temperature arising from the hybridization of the core level and conduction electrons. The thermodynamic and spectroscopic properties of these metals can be understood as those of a simple metal, but with a significant mass enhancement over the free electron mass—commonly referred to as heavy fermions. In most heavy-fermion materials, the hybridization is approximately isotropic in position and momentum space. However, a combination of low dimensionality and symmetry properties of the core-level wavefunctions can give rise to highly anisotropic electronic interactions with the conduction electrons. Here, in this study, we demonstrate anisotropic hybridization that vanishes along specific directions in momentum space—referred to as nodes—in a lanthanide-based two-dimensional van der Waals heavy-fermion compound, CeSiI. Quasiparticle interference measurements reveal a set of discrete hotspots with high spectral intensity on the Fermi surface. Theoretical modelling and comparison with the quasiparticle interference pattern of the non-heavy-fermion isostructural analogue LaSiI suggest that these features arise from an unconventional electron interaction involving hybridization nodes unique to CeSiI. As a result, the effective mass of the quasiparticles varies by orders of magnitude depending on their direction in momentum space.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Coherent spin wave excitation with radio-frequency spin–orbit torque

Spin waves, collective perturbations of magnetic moments, are both fundamental probes for magnetic physics and promising candidates for energy-efficient signal processing and computation. Traditionally, coherent propagating spin waves have been generated by radio frequency (RF) inductive Oersted fields from current-carrying electrodes. An alternative mechanism, spin–orbit torque (SOT), offers more localized excitation through interfacial spin accumulation but has been mostly limited to DC to kHz frequencies. SOT driven by RF currents, with potentially enhanced pumping efficiency and unique spin dynamics, remains largely unexplored, especially in magnetic insulators. Here, we conduct a comprehensive theoretical and computational investigation into the generation of coherent spin waves via RF-SOT in the prototypical yttrium iron garnet. We characterize the excitation of forward volume, backward volume, and surface modes in both linear and nonlinear regimes, employing single and interdigitated electrode configurations. We reveal and explain several unique and surprising features of RF-SOT compared to inductive excitation, including higher efficiency, distinct mode selectivity, and directional symmetry, a ~ $3π/4$ phase offset, reduced anharmonic distortion in the nonlinear regime, and the absence of second harmonic generation. These insights position RF-SOT as a promising new mechanism for future magnonic and spintronic applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Mineral-associated organic matter is heterogeneous and structured by hydrophobic, charged, and polar interactions

The formation of mineral-associated organic matter (MAOM) is a key phenomenon that may explain the slow turnover rates of carbon in soil organic matter (SOM). Despite this, important details pertaining to the structure and dynamics of MAOM remain unknown. In the present study, we use replica-exchange molecular dynamics simulations to gain insight into the structure of MAOM on the surface of prototypical phyllosilicate clay and Fe-oxide minerals, montmorillonite and goethite, fine-grained minerals that strongly impact soil carbon dynamics in temperate and tropical regions, respectively. We examine the impact of aqueous chemistry through the presence of either Na + or Ca 2 + charge balancing counterions. Our results are consistent with the hypothesized multilayer sorption (“onion-skin”) model of MAOM and help to explain previous observations regarding the patchy distribution of SOM on mineral surfaces. In particular, the SOM coatings are partial and laterally heterogeneous, and water retains extensive access to mineral surfaces even when significant SOM sorption occurs. Low molecular weight neutral SOM molecules ( < 200 Da) infrequently interact with the mineral surfaces nor their sorbed organic matter coatings and are increasingly labile with decreasing molecular weight. This observation is inconsistent with a central feature of the predominant soil continuum model of SOM and suggests that further iterations of the conceptual model may be required.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Fabrication of a Point-Like Transmission Target for Reducing Computed Tomography Imaging Artifacts

In this study, we address the challenge of enhancing image quality and spatial resolution in computed tomography (CT) imaging by introducing simulation and fabrication of high aspect ratio, point-like transmission targets. Utilizing advanced electroplating techniques, traditionally employed in the fabrication of Through Substrate Via (TSV) interconnects for CMOS circuitry, we successfully embed copper targets within silicon substrates. This method allows us to create high-aspect-ratio features specifically designed for X-ray transmission targets, resulting in micro targets that exhibit a volume increase compared to conventional evaporated surface targets. Furthermore, we present simulation results of the X-ray spectrum generated by these targets, demonstrating their potential to significantly improve both image quality and spatial resolution in CT applications. Our findings suggest that leveraging advanced fabrication techniques can open new avenues for the development of enhanced imaging technologies in medical diagnostics and beyond.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

Operando APXPS for direct probing of Li ion battery LCO electrode/electrolyte interface chemistry during lithiation/delithiation

The real-time interface chemistry between the lithium cobalt oxide (LCO) working electrode and the LiClO 4 /propylene carbonate (PC) electrolyte is investigated during lithiation/delithiation using dip-and-pull ambient pressure photoelectron spectroscopy (APXPS). The APXPS results appear to exhibit the seldom discussed Co 2+ state in the LCO structure, where the operando measurements indicate electron transfer among Co 2+ , Co 3+ , and Co 4+ states. Specifically, the lithiation of LCO reduces the Co 4+ state to both Co 3+ and Co 2+ states, where, as a function of voltage, reduction to the Co 2+ state is initially more pronounced followed by Co 3+ formation. In addition, a delay in surface delithiation is observed during the reverse potential steps. This is discussed in terms of overpotential at the interface measurement position as a consequence of the dip-and-pull setup for this experiment. Finally, the shifts in the apparent binding energies of the spectral features corresponding to the electrolyte and LCO at their interface show that the electrochemical potentials at delithiation voltage steps are different from the lithiation steps at the same applied voltages. This further explains the non-responsive delithiation. The BE shift observed from the LCO surface is argued to be dominantly due to the semi-conductive nature of the sample. Overall, this article shows the importance of operando APXPS for probing non-equilibrium states in battery electrodes for understanding electron transfer in the reactions.

Liu, Qianhui [Uppsala Univ. (Sweden)] (ORCID:00000↗
DOE OSTI2025

Entropy-based feature selection for capturing impacts in Earth system models with abrupt forcing

This paper presents the development of a new entropy-based feature selection method for identifying and quantifying impacts. Here, impacts are defined as statistically significant differences in spatio-temporal fields when comparing datasets with and without an external forcing in an Earth system model. Temporal feature selection is performed by first computing the cross-fuzzy entropy to quantify similarity of patterns between two datasets and then applying changepoint detection to identify regions of statistically constant entropy. The method is used to capture temperate north surface cooling from a 9-member simulation ensemble of the Mt. Pinatubo volcanic eruption, which injected 10 Tg of SO 2 into the stratosphere. The results estimate a mean difference decrease in near surface air temperature of -0.560 K with a 99% confidence interval between -0.864 K and -0.257 K between April and November of 1992, one year following the eruption. A sensitivity analysis with decreasing SO 2 injection revealed that the impact is statistically significant at 5 Tg but not at 3 Tg. Using identified features, a dependency graph model based on a 9-day lag had significantly fewer nodes than a graph based on monthly means. Furthermore, this demonstrates our method’s ability to perform dimension reduction while still uncovering source-to-impact pathways.

Changepoint detection↗
DOE OSTI2025

Evaluating genetic and environmental controls on silicon accumulation in Populus trichocarpa leaves

Background and aims: Silicon (Si) accumulation and formation of non-crystalline silica particles (phytoliths) inside plant cells contribute to plant function, soil carbon storage, and Si reservoirs in soils. A better understanding of how genetic and environmental factors control Si accumulation may improve understanding of Si cycling between plants and soil and its impacts on other ecosystem processes. Methods: This study examined how genetic potential for Si uptake and silicification translated to Si concentrations and phytolith formation in Populus trichocarpa leaves. Leaves were collected from four different genotypes of cultivated poplar trees that were grown in a common garden and possess established differences in leaf-level gene expression related to Si transport and silicification. Scanning electron microscopy and subsequent image analysis were used to quantify Si concentrations and phytolith abundance and features. Results: Phytoliths were identified in nearly all leaves but were often absent at very low (< 0.5 wt.%) Si concentrations at the leaf surface. The proportion of leaf area occupied by phytoliths increased as Si content increased. Silicon content and phytolith abundance at the leaf surface did not vary across genotypes, but surface Si was weakly correlated with plant available Si in soil. Conclusion: Phytoliths were prevalent in P. trichocarpa leaves; however, the genetic potential for Si uptake and silicification at the leaf-level poorly predicted foliar Si and phytolith abundance. Uniformly low expression of Si uptake genes in the roots may have reduced differences across genotypes. Consequently, Si accumulation in leaves was likely more strongly influenced by soil Si bioavailability, phenology, or additional environmental factors.

Image analysis↗
DOE OSTI2025

The shear Alfvén continuum of quasisymmetric stellarators

The shear Alfvén wave (SAW) continuum plays a critical role in the stability of energetic particle-driven Alfvén eigenmodes. We develop a theoretical framework to analyze the SAW continuum in three-dimensional (3-D) quasisymmetric magnetic fields, focusing on its implications for stellarator design. By employing a near-axis model and degenerate perturbation theory, the continuum equation is solved, highlighting unique features in 3-D configurations, such as the interactions between spectral gaps. Numerical examples validate the theory, demonstrating the impact of flux-surface shaping and quasisymmetric field properties on continuum structure. The results provide insights into optimizing stellarator configurations to minimize resonance-driven losses of energetic particles. This work establishes a basis for incorporating Alfvénic stability considerations into the stellarator design process, demonstrated through optimization of a quasihelical configuration to avoid high-frequency spectral gaps.

fusion plasma↗
DOE OSTI2025

Modulating thermal conductance at ligand/nanocrystal interfaces via oxygen-coordinated ligands

Here, the interfacial thermal conductance (h lig–NC ) between a cadmium selenide (CdSe) nanocrystal (NC) and three related organic ligands—olealdehyde, oleyl alcohol, and oleic acid—was investigated computationally. These ligands have the same carbon backbone but differ in the number and type of oxygen-coordinated headgroups (carbonyl and/or hydroxyl), leading to distinct bonding geometries involving monodentate and bidentate bonds. For a fully encapsulated NC, h lig–NC increases in the order of olealdehyde, oleic acid, and oleyl alcohol ligands. To isolate the contributions of h lig–NC from each headgroup type, the distinct bonding geometries were analyzed. Aldehyde and alcohol ligands, each featuring a single oxygen headgroup (carbonyl or hydroxyl), exhibit similar O–Cd separations and nearly identical h lig–NC per ligand at full surface coverage. However, the hydroxyl group in the alcohol ligand enables a higher ligand grafting density on the NC surface, resulting in a greater overall h lig–NC than the aldehyde-grafted NCs. In contrast, the oleic acid ligand forms multidentate bonds with the NC, leading to a shorter average O–Cd separation and a higher h lig–NC per ligand compared to monodentate bonds. Nevertheless, steric hindrance from the acid ligand's larger headgroup reduces its grafting density relative to alcohol ligands, ultimately resulting in a lower overall h lig–NC .

Wong, Kae-Lin [Zhejiang Univ., Hangzhou (China)] (↗
DOE OSTI2025

CuXASNet: Rapid and accurate prediction of copper L-edge x-ray absorption spectra using machine learning

In this work, we have developed CuXASNet, a dense neural network that predicts simulated Cu -edge x-ray absorption spectra (XAS) from atomic structures. Featurization of the Cu local environment is performed using a component of M3GNet, a graph neural network developed for predicting the potential energy surface. CuXASNet is trained on simulated spectra from FEFF9 at the multiple scattering level of theory, and can predict the and edges for Cu sites to quantitative accuracy. To validate our approach, we compare 14 experimental spectra extracted from the literature with the predictions of CuXASNet. The agreement of CuXASNet with experiments is shown by an average mean absolute error of 0.125 and an average Spearman's correlation coefficient of 0.891, which is comparable to FEFF9's values of 0.131 and 0.898 for the same metrics. As such, CuXASNet can rapidly predict a large number of -edge XAS spectra at the same accuracy as FEFF9 simulations. This can be used as a drop-in replacement for multiple scattering codes for fast screening of candidate atomic structure models of a measured system. This model establishes a general framework for Cu XAS prediction, and can be extended to more computationally expensive levels of theory and to other transition metal edges.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Automating the detection of hydrological barriers and fragmentation in wetlands using deep learning and InSAR

The loss of hydrological connectivity and fragmentation of natural wetlands is a widespread driver of wetland degradation. Understanding where and how natural connectivity is impaired is essential for managing, protecting and remediating these ecosystems. Wetland Interferometric Synthetic Aperture Radar (Wetland InSAR) can provide information on surface flow orientation in wetlands at a high spatial resolution, which can be used for barrier detection. However, the broad application of this approach is constrained by the labour-intensive manual delineation of barriers based on mapped water levels. This study presents the first deep learning-based methodology for the automated detection of hydrological barriers. We trained a deep convolutional network to segment edge features of hydrological barriers in 25 image pairs captured by ALOS PALSAR-1 L-Band InSAR between 2006 and 2011. The training dataset consists of manually labelled and delineated barriers showing abrupt changes in water surface elevation and wrapped interferograms with high coherence. We tested this method across three wetland sites: the Everglades and southern Louisiana wetlands (United States) and the Cienaga de Zapata (Cuba). Across these sites, the convolutional network detected hydrological barriers with up to 84% accuracy. The model performed particularly well for linear hydrological barriers such as roads, dikes, and channels. Notably, some barriers impede flow only seasonally, appearing during low water levels and disappearing when water levels rise. Our automated approach to detecting and assessing wetland hydrologic connectivity can be applied more broadly to support the effective management of fragmented wetland ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Symmetry‐Breaking Strategy Yields Dopant‐Free Small Molecule Hole Transport Materials for Inorganic Perovskite Solar Cells with 20.58% Efficiency and Outstanding Stability

Abstract Inorganic perovskites are known for their excellent photothermal stability; however, the photothermal stability of all‐inorganic n‐i‐p perovskite solar cells (PSCs) is compromised due to ion diffusion and free radical‐induced degradation caused by the use of doped spiro‐OMeTAD hole transport materials (HTMs). In this study, two isomeric donor–acceptor–donor (D–A–D) type small molecules, namely HBT and HiBT, were developed and used as dopant‐free HTMs, using 2,1,3‐benzothiadiazole or benzo[d][1,2,3]thiadiazole as acceptor moieties. The HiBT molecule, with its symmetry‐breaking features, exhibits a large dipole moment, enhanced coordination‐active sites, and a well‐aligned energy level structure, all of which contribute to passivating perovskite surface defects and improving free charge separation. As a result, inorganic CsPbI 3 PSCs with HiBT HTM achieved an impressive power conversion efficiency (PCE) of 20.58%, the highest reported for dopant‐free HTM‐based inorganic PSCs. Moreover, the enhanced hydrophobic properties of HiBT molecules, coupled with their ability to passivate perovskite surface defects, contribute to significantly improved device stability. The unencapsulated devices based on HiBT HTM retained over 83% and 80% of their initial efficiency after being stored at 85 °C for 50 days and undergoing maximum power point (MPP) tracking at 85 °C for 1100 h, respectively. These results highlight that the symmetry‐breaking strategy is an exceptionally effective approach for designing efficient, dopant‐free small molecule HTMs, significantly contributing to both the high efficiency and enhanced stability of all‐inorganic PSCs.

Chemistry↗
DOE OSTI2024

Structural basis for C-degron selectivity across KLHDCX family E3 ubiquitin ligases

Abstract Specificity of the ubiquitin-proteasome system depends on E3 ligase-substrate interactions. Many such pairings depend on E3 ligases binding to peptide-like sequences - termed N- or C-degrons - at the termini of substrates. However, our knowledge of structural features distinguishing closely related C-degron substrate-E3 pairings is limited. Here, by systematically comparing ubiquitylation activities towards a suite of common model substrates, and defining interactions by biochemistry, crystallography, and cryo-EM, we reveal principles of C-degron recognition across the KLHDCX family of Cullin-RING ligases (CRLs). First, a motif common across these E3 ligases anchors a substrate’s C-terminus. However, distinct locations of this C-terminus anchor motif in different blades of the KLHDC2, KLHDC3, and KLHDC10 β-propellers establishes distinct relative positioning and molecular environments for substrate C-termini. Second, our structural data show KLHDC3 has a pre-formed pocket establishing preference for an Arg or Gln preceding a C-terminal Gly, whereas conformational malleability contributes to KLHDC10’s recognition of varying features adjacent to substrate C-termini. Finally, additional non-consensus interactions, mediated by C-degron binding grooves and/or by distal propeller surfaces and substrate globular domains, can substantially impact substrate binding and ubiquitylatability. Overall, the data reveal combinatorial mechanisms determining specificity and plasticity of substrate recognition by KLDCX-family C-degron E3 ligases.

Science & Technology - Other Topics↗