Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Surface Segregation in Multicomponent Systems: Modeling of Surface Alloys and Alloy Surfaces

The study of surface segregation, although of great technological importance, has been largely restricted to experimental work due to limitations associated with theoretical methods. However, recent improvements in both first-particle and semi-empirical methods are opening, the doors to an array of new possibilities for surface scientists. We apply one of these techniques, the Bozzolo, Ferrante and Smith (BFS) method for alloys, which is particularly suitable for complex systems, to several aspects of the computational modeling of surfaces and segregation, including alloy surface segregation, structure and composition of alloy surfaces, and the formation of surface alloys. We conclude with the study of complex NiAl-based binary, ternary and quaternary thin films (with Ti, Cr and Cu additions to NiAl). Differences and similarities between bulk and surface compositions are discussed, illustrated by the results of Monte Carlo simulations. For some binary and ternary cases, the theoretical predictions are compared to experimental results, highlighting the accuracy and value of this developing theoretical tool.

Bozzolo, Guillermo↗
DOE OSTI2023

LLNL Automized Surface Titration Model

The LLNL Automized Surface Titration Model (L-ASTM) is a community data-driven surface complexation modeling workflow for simulating potentiometric titration of mineral surfaces. The model accepts raw experimental potentiometric titration data formatted in a findable, accessible, interoperable, and reusable (FAIR) structure. The workflow was coded in Python and coupled to PHREEQC for surface complexation modeling and PEST for data fitting and parameter estimation.

Solchan, Han↗
NASA NTRS1988

One-level modeling for diagnosing surface winds over complex terrain. II - Applicability to short-range forecasting

The Alpert and Getenio (1988) modification of the Mass and Dempsey (1985) one-level sigma-surface model was used to study four synoptic events that included two winter cases (a Cyprus low and a Siberian high) and two summer cases. Results of statistical verification showed that the model is not only capable of diagnosing many details of surface mesoscale flow, but might also be useful for various applications which require operative short-range prediction of the diurnal changes of high-resolution surface flow over complex terrain, for example, in locating wildland fires, determining the dispersion of air pollutants, and predicting changes in wind energy or of surface wind for low-level air flights.

Alpert, P.↗
NASA NTRS2010

Land Surface Emission Modeling to Support Physical Precipitation Retrievals

Land surface modeling and data assimilation can provide dynamic land surface state variables necessary to support physical precipitation retrieval algorithms over land. It is well-known that surface emission, particularly over the range of frequencies to be included in the Global Precipitation Measurement Mission (GPM), is sensitive to land surface states, including soil properties, vegetation type and greenness, soil moisture, surface temperature, and snow cover, density, and grain size. In order to investigate the robustness of both the land surface model states and the microwave emissivity and forward radiative transfer models, we have undertaken a multi-site investigation as part of the NASA Precipitation Measurement Missions (PMM) Land Surface Characterization. Working Group.

Peters-Lidard, Christina D.↗
NASA NTRS2000

A Catchment-Based Approach to Modeling Land Surface Processes in a GCM: Parameter Estimation and Model Demonstration - Part 2

The viability of a new catchment-based land surface model (LSM) developed for use with general circulation models is demonstrated. First, simple empirical functions -- tractable enough for operational use in the LSM -- are established that faithfully capture the control of topography on the subgrid variability of soil moisture and the surface water budget, as predicted by theory. Next, the full LSM is evaluated offline. Using forcing and validation datasets developed for PILPS Phase 2c, the minimally calibrated model is shown to reproduce observed evaporation and runoff fluxes successfully in the Red-Arkansas River Basin. A complementary idealized study that employs the range of topographic variability seen over North America demonstrates that the simulated surface water budget does vary strongly with topography, which can, by itself, induce variations in annual evaporation as high as 20%.

Ducharne, Agnes↗
NASA NTRS2001

Matching Images to Models: Camera Calibration for 3-D Surface Reconstruction

In a previous paper we described a system which recursively recovers a super-resolved three dimensional surface model from a set of images of the surface. In that paper we assumed that the camera calibration for each image was known. In this paper we solve two problems. Firstly, if an estimate of the surface is already known, the problem is to calibrate a new image relative to the existing surface model. Secondly, if no surface estimate is available, the relative camera calibration between the images in the set must be estimated. This will allow an initial surface model to be estimated. Results of both types of estimation are given.

Morris, Robin D.↗
NASA NTRS1987

A scattering model for perfectly conducting random surfaces. I - Model development. II - Range of validity

The surface current on a perfectly conducting randomly rough surface is estimated by solving iteratively a standard integral equation, and the estimate is then used to compute the far-zone scattered fields and the backscattering coefficients for vertical, horizontal and cross polarizations. The model developed here yields a simple backscattering coefficient expression in terms of the surface parameters. The expression reduces analytically to the Kirchhoff and the first-order small-perturbation model in the high- and low-frequency regions, respectively. The range of validity of the model is determined.

Fung, A. K.↗
NASA NTRSDate not supplied

Preliminary Measurements on the BOLT Geometry in the Supersonic Low Disturbance Tunnel

Experiments were performed in the Mach 3.5 Supersonic Low Disturbance Tunnel on the BOundary-Layer Transition (BOLT) geometry. The goal of this campaign was to assess changes to the transition front by varying the freestream noise and the model surface quality. The model was printed of polycarbonate and is 30% scale of the flight geometry. It was tested under noisy and quiet conditions at different streamwise positions in the tunnel and was also tested before and after improvements were made to the model surface through sanding and gap reduction. Pitch and yaw angles were nominally zero. The model surface temperature was measured using infrared thermography and thermocouples as the unit Reynolds number was swept from 4.75 – 15.8 × 10 6 m −1 . Boundary-layer transition was observed near the midspan of the model for unit Reynolds numbers above 10×10 6 m −1 in quiet flow, while transition was already observed on the shoulders below 5×10 6 m −1 in noisy flow. The model surface enhancements improved the symmetry of the transition front for quiet flow but made only slight differences for noisy flow. In quiet flow, the impact of streamwise positioning on transition was more significant on the model shoulders compared to the central region. The difference in the shoulder heating was likely due to variation in noise radiated from the nozzle sidewalls. The total temperature and initial wall temperatures were near 300 K and 293 K, respectively, which generally resulted in negative convective heat-flux values into the model. Hot-wire anemometry was also utilized to characterize the freestream and to conduct a planar survey near the base of the model for the 7.92 × 10 6 m −1 quiet condition. The survey captured the thickening of the boundary layer at the centerline and the vortical nature of the flow outboard of it. Spectral analysis of the mass-flux fluctuations near the midspan demonstrates that the boundary layer is laminar and suggests that the thick boundary layer caused the relatively warm centerline observed in the infrared images.

boundary layer transition↗
NASA NTRSDate not supplied

Preliminary Measurements on the BOLT Geometry in the Supersonic Low Disturbance Tunnel

Experiments were performed in the Mach 3.5 Supersonic Low Disturbance Tunnel on the BOundary-Layer Transition (BOLT) geometry. The goal of this campaign was to assess changes to the transition front by varying the freestream noise and the model surface quality. The model was printed of polycarbonate and is 30% scale of the flight geometry. It was tested under noisy and quiet conditions at different streamwise positions in the tunnel and was also tested before and after improvements were made to the model surface through sanding and gap reduction. Pitch and yaw angles were nominally zero. The model surface temperature was measured using infrared thermography and thermocouples as the unit Reynolds number was swept from 4.75 -- 15.8 x 10^6 m^{-1}. Boundary-layer transition was observed near the midspan of the model for unit Reynolds numbers above 10 x 10^6 m^{-1} in quiet flow, while transition was already observed on the shoulders below 5 x 10^6 m^{-1} in noisy flow. The model surface enhancements improved the symmetry of the transition front for quiet flow but made only slight differences for noisy flow. In quiet flow, the impact of streamwise positioning on transition was more significant on the model shoulders compared to the central region. The difference in the shoulder heating was likely due to variation in noise radiated from the nozzle sidewalls. The total temperature and initial wall temperatures were near 300 K and 293 K, respectively, which generally resulted in negative convective heat-flux values into the model. Hot-wire anemometry was also utilized to characterize the freestream and to conduct a planar survey near the base of the model for the 7.92 x 10^6 m^{-1} quiet condition. The survey captured the thickening of the boundary layer at the centerline and the vortical nature of the flow outboard of it. Spectral analysis of the mass-flux fluctuations near the midspan demonstrates that the boundary layer is laminar and suggests that the thick boundary layer caused the relatively warm centerline observed in the infrared images.

boundary layer transition↗
NASA NTRSDate not supplied

Improving the Representation of Land Surface Processes using the Data Assimilation Research Testbed (DART)

The land surface is a critical part of the earth system as processes related to water, carbon, energy and nitrogen cycling have important implications for climate forcing, air quality, water availability and seasonal atmospheric forecasting. Despite advances in land surface modeling, land surface model performance is often limited because of errors related to initial and boundary conditions, model structure, and parameters. Data assimilation (DA) techniques combined with an expanding network of earth system observations present an opportunity to reduce these errors and improve simulations. Here we apply an Ensemble Kalman Filter DA system as part of the Data Assimilation Research Testbed to a variety of land surface simulations. First, we describe the use of remotely sensed biomass observations to provide improved simulations of plant phenology, carbon and water cycling for regions highly sensitive to climate change (Western US, China, and Arctic). We discuss approaches to account for systemic biases between models and observations, including the use of spatially-varying adaptive ensemble inflation as an alternative approach to re-scaling soil moisture observations. Finally, we discuss a strategy to incorporate complementary observations (snow water equivalent, solar-induced fluorescence) to better constrain the representation of carbon and water cycling across complex terrain.

DART↗
NASA NTRS1985

Analysis of all-frequency variational behavior of the Kirchhoff approximation for a classic surface-scattering model

In testing a stochastic variational principle at high frequencies by using a Kirchhoffean trial function in an idealized model for surface scattering - a randomly embossed plane - we have found not only the predicted high-frequency improvement but also an unexpected low-frequency improvement in the calculated scattering amplitudes. To investigate systematically the all-frequency variational behavior, we consider here the deterministic one-boss case - Rayleigh's classic model whose exact solution is available for comparison - over all wavelengths, polarizations, and configurations of incidence and scattering. We examine analytically in particular the long-wave limit of the variational-Kirchhoff amplitudes; the results demonstrate improvements in both wavelength and angle depedence for horizontal (TM) polarization and some variational improvements for vertical (TE) polarization. This low-frequency behavior in tandem with the foreseen high-frequency improvement leads to good variational-Kirchhoff results through the intermediate resonance-frequency regime for this model.

Bird, J. F.↗
NASA NTRSDate not supplied

Improving the Representation of Land Surface Processes Using the Data Assimilation Research Testbed (DART)

The land surface is a critical part of the earth system as processes related to water, carbon, energy and nitrogen cycling have important implications for climate forcing, air quality, water availability and seasonal atmospheric forecasting. Despite advances in land surface modeling, land surface model performance is often limited because of errors related to initial and boundary conditions, model structure, and parameters. Data assimilation (DA) techniques combined with an expanding network of earth system observations present an opportunity to reduce these errors and improve simulations. Here, we emphasize the implementation of tools and approaches to overcome challenges related to land DA to constrain carbon and water cycling. In particular, we discuss the implementation of adaptive inflation to modify ensemble spread in response to time-varying networks of gridded observations. We also discuss methods to generate ensemble spread through boundary condition (meteorology) forcing that can be applied to site-level applications. Next, we describe the application of vertical localization upon surface soil moisture observations, and forward operators specifically designed for the assimilation of snow and solar-induced fluorescence observations. Finally, we discuss the potential benefit of a quantile conserving filter used to update bounded quantities (state or parameter values).

Brett Raczka↗
DOE OSTI2026

Diagnosing the representation of surface and layered soil moisture in Earth system models

Surface soil moisture (mrsos) and vertically integrated soil moisture (mrsol) over the top 10 cm should, by definition, be physically consistent in Earth System Models (ESMs). However, an evaluation of nine CMIP6 models reveals substantial inconsistencies: in some models, mrsos and integrated mrsol agree globally; in others, they align only in specific regions; and in a few, they diverge across all grid cells. These discrepancies arise from a combination of factors, including metadata errors, inconsistent variable definitions, or diagnostic sequencing within the model. We demonstrate how such issues can lead to significant biases, even when both variables are present and seemingly well-defined. As model complexity increases and multi-model comparisons become more common, assumptions about variable equivalence may lead to flawed conclusions. This study highlights the need for routine consistency checks, improved metadata standards, and community-wide practices that ensure reliability of derived variables across ESM outputs, particularly in preparation for CMIP7.

Earth system models↗
NASA NTRS1972

The line spring model for surface flaws.

A model is discussed for the analysis of long part-through surface cracks in the walls of plate or shell structures. Such problems are formulated within the context of two dimensional plate and shell theory with the part-cracked section represented as a line-spring in the middle surface. The spring allows relative separations and rotations of the middle surface, and constitutive laws relating these discontinuities to the prevailing force and moment per unit length at any point are taken from the plane strain solution for a strip in combined tension and bending, which contains an edge crack of a corresponding depth. Prior work is reviewed and further line spring constitutive laws are discussed as appropriate to elastic analysis with thermal or residual stresses and to elastic-plastic analysis, with yielding in the ligament between the crack front and far wall in the latter case.

Rice, J. R.↗
NASA NTRS2012

Particle-Surface Interaction Model and Method of Determining Particle-Surface Interactions

A method and model of predicting particle-surface interactions with a surface, such as the surface of a spacecraft. The method includes the steps of: determining a trajectory path of a plurality of moving particles; predicting whether any of the moving particles will intersect a surface; predicting whether any of the particles will be captured by the surface and/or; predicting a reflected trajectory and velocity of particles reflected from the surface.

Hughes, David W.↗