Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Reinforcing blade-cast photocatalytic-titania thin film by titanate nanotubes

Highlights: • Suspension-based photocatalysts are inferior to thin-films due to separation issues. • Hydrothermal TiO{sub 2} nanotubes and sol-gel Ti(n-OBu){sub 4} blends were tape casted on glass. • Optimum blend composition yields mechanical stability due to the tubes reinforcing effect. • At optimum gel content the nanotube bundles are smoothed without stabilizers added. • Surface accessibility and mass transfer dominate the photocatalytic dye degradation. - Abstract: Titanate nanotubes/titania gel blends were prepared as composite sol-gel material, deposited on a glass substrate using a doctor blade and calcined in order to create thin films. In order to get an insight in titania nanotubes’ ability to reinforce thin films, drying control chemical agents were not used. The effects of titanate nanotubes to titanium n-butoxide ratio on surface morphology, phase composition, mechanical stability and photocatalytic activity were studied. Characterization of the thin films was carried out by means of optical and scanning electron microscopy, powder X-ray diffraction, synchrotron radiation grazing incidence X-ray diffraction and mechanical stability testing. Photocatalytic properties of the obtained thin films were evaluated on the basis of methylene blue degradation. Moderate blends exhibit favourable microstructural features while the dye degradation rate was greater for films with a greater amount of titanate nanotubes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Dependence of Mean Climate State on Shortwave Absorption by Water Vapor

Abstract State-of-the-art climate models exhibit significant spread in the climatological value of atmospheric shortwave absorption (SWA). This study investigates both the possible causes and climatic impacts of this SWA intermodel spread. The intermodel spread of global-mean SWA largely originates from the intermodel difference in water vapor shortwave absorptivity. Hence, we alter the water vapor shortwave absorptivity in the Community Earth System Model, version 1, with the Community Atmosphere Model, version 4 (CESM1-CAM4). Increasing the water vapor shortwave absorptivity leads to a reduction in global-mean precipitation and a La Niña–like cooling over the tropical Pacific. The global-mean atmospheric energy budget suggests that the precipitation is suppressed as a way to compensate for the increased SWA. The precipitation reduction is driven by the weakened surface winds, stabilized planetary boundary layer, and surface cooling. The La Niña–like cooling over the tropical Pacific is attributed to the zonal asymmetry of climatological evaporative damping efficiency and the low cloud enhancement over the eastern basin. Complementary fixed SSTs simulations suggest that the latter is more fundamental and that it primarily arises from atmospheric processes. Consistent with our experiments, the CMIP5/6 models with a higher global-mean SWA tend to produce tropical Pacific toward a more La Niña–like mean state, highlighting the possible role of water vapor shortwave absorptivity for shaping the mean-state climate patterns.

Kim, Hanjun↗

Performance Evaluation of Decontamination Foam Containing Mesoporous silica NPs - 18453

It is necessary to secure decontamination technology that is easy to apply and minimizes the generation of secondary waste for large-scale equipment and large-area decontamination, which are difficult to be applied structurally when massive repairs or the decommissioning of a nuclear facility are required. In this respect, decontamination foam has a potentially wide application in the removal of contaminants from metallic walls, overhead surfaces, and elements of complex components and facilities. The decontamination efficiency can be enhanced by improving the contact time between the chemical decontamination agents and the contaminated surface through the introduction of stabilizers into the decontamination foam. In this study, the stability of a decontamination foam containing mesoporous silica NPs as a stabilizer and the decontamination performance of radioactive isotope contaminated specimens were evaluated. A process for waste liquid treatment after foam decontamination was also proposed. Decontamination performance tests using RI contaminated specimens were carried out in a decontamination foam prepared only with a solution containing only 1 wt% EM100 surfactant, and in a decontamination foam prepared with a solution containing 1 wt% EM100 surfactant and 1 wt% of various silica NPs. The stability of the decontamination foam was increased owing to the addition of various types of silica NPs. In particular, the liquid film thickness of the decontamination foam containing mesoporous silica NPs was the largest. As a result, the decontamination coefficient for RI contaminated specimens increased as the thickness of the foam liquid film increased owing to the longer contact time between the RI contaminated specimen and the chemical decontamination agent as the thickness of the foam liquid film increased. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Surface rheology and interface stability.

We have developed a mature laboratory at Sandia to measure interfacial rheology, using a combination of home-built, commercially available, and customized commercial tools. An Interfacial Shear Rheometer (KSV ISR-400) was modified and the software improved to increase sensitivity and reliability. Another shear rheometer, a TA Instruments AR-G2, was equipped with a du Nouey ring, bicone geometry, and a double wall ring. These interfacial attachments were compared to each other and to the ISR. The best results with the AR-G2 were obtained with the du Nouey ring. A Micro-Interfacial Rheometer (MIR) was developed in house to obtain the much higher sensitivity given by a smaller probe. However, it was found to be difficult to apply this technique for highly elastic surfaces. Interfaces also exhibit dilatational rheology when the interface changes area, such as occurs when bubbles grow or shrink. To measure this rheological response we developed a Surface Dilatational Rheometer (SDR), in which changes in surface tension with surface area are measured during the oscillation of the volume of a pendant drop or bubble. All instruments were tested with various surfactant solutions to determine the limitations of each. In addition, foaming capability and foam stability were tested and compared with the rheology data. It was found that there was no clear correlation of surface rheology with foaming/defoaming with different types of surfactants, but, within a family of surfactants, rheology could predict the foam stability. Diffusion of surfactants to the interface and the behavior of polyelectrolytes were two subjects studied with the new equipment. Finally, surface rheological terms were added to a finite element Navier-Stokes solver and preliminary testing of the code completed. Recommendations for improved implementation were given. When completed we plan to use the computations to better interpret the experimental data and account for the effects of the underlying bulk fluid.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Roles of Mo Surface Dopants in Enhancing the ORR Performance of Octahedral PtNi Nanoparticles

Doping with a transition metal was recently shown to greatly boost the activity and durability of PtNi/C octahedral nanoparticles (NPs) for the oxygen reduction reaction (ORR), but its specific roles remain unclear. By combining electrochemistry, ex situ and in situ spectroscopic techniques, density functional theory calculations, and a newly developed kinetic Monte Carlo model, we showed that Mo atoms are preferentially located on the vertex and edge sites of Mo–PtNi/C in the form of oxides, which are stable within the wide potential window of the electrochemical cycle. These surface Mo oxides stabilize adjacent Pt sites, hereby stabilizing the octahedral shape enriched with (111) facets, and lead to increased concentration of Ni in subsurface layers where they are protected against acid dissolution. Consequently, the favorable Pt 3 Ni(111) structure for the ORR is stabilized on the surface of PtNi/C NPs in acid against voltage cycling. Significantly, the unusual potential-dependent oxygen coverage trend on Mo-doped PtNi/C NPs as revealed by the surface-sensitive Δμ analysis suggests that the Mo dopants may also improve the ORR kinetics by modifying the coordination environments of Pt atoms on the surface. Lastly, our studies point out a possible way to stabilize the favorable shape and composition established on conceptual catalytic models in practical nanoscale catalysts.

36 MATERIALS SCIENCE↗

Chlorine adsorption on the InAs (001) surface

Chlorine adsorption on the In-stabilized InAs(001) surface with {zeta}-(4 Multiplication-Sign 2) and {beta}3 Prime -(4 Multiplication-Sign 2) reconstructions and on the Ga-stabilized GaAs (001)-{zeta}-(4 Multiplication-Sign 2) surface has been studied within the electron density functional theory. The equilibrium structural parameters of these reconstructions, surface atom positions, bond lengths in dimers, and their changes upon chlorine adsorption are determined. The electronic characteristics of the clean surface and the surface with adsorbed chlorine are calculated. It is shown that the most energetically favorable positions for chlorine adsorption are top positions over dimerized indium or gallium atoms. The mechanism of chlorine binding with In(Ga)-stabilized surface is explained. The interaction of chlorine atoms with dimerized surface atoms weakens surface atom bonds and controls the initial stage of surface etching.

36 MATERIALS SCIENCE↗

Scanning tunneling spectroscopy of surface-oxidized Gallium-stabilized δ -phase plutonium

Here, the first contiguous experimental scanning tunneling spectroscopy (STS) measurements of the electronic structure of a plutonium (Pu) surface are presented and compared to current theoretical results. The experiments took place under UHV conditions, for which Pu is known to retain a native surface oxide. The STS data shows that no band gap is observable at room temperature. Theoretical calculations predict that bulk Pu oxides are semiconductors, but the spectral results for the cleaned Pu surface native oxide under UHV conditions could be better characterized as that of a semimetal.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Analysis of the Thermal Stability of Very Thin Surface Layers of Corrosion Inhibitors by Time-of-Flight Secondary Ion Mass Spectrometry

The powerful nature of the secondary ion mass spectrometry (SIMS) technique was explored in order to analyse very thin surface layers that were self-assembled on steel material from acidic solution. These surface layers are adsorbed corrosion inhibitors. The SIMS technique proved useful to characterise the molecular structure and homogeneity of thin surface layers in the nanometre range of specific analytes on the metallic substrate. Using SIMS, the thermal stability of these layers was further investigated and the desorption energy at a certain temperature was determined, where special attention was devoted to the method’s static limit. In order to compare, and for certain cases emphasise, the benefits gained by using SIMS in such surface analysis compared with the X-ray photoelectron spectroscopy (XPS) method, the same samples were also analysed by means of the latter. XPS is usually considered to be the most powerful analytical tool in surface analysis studies, but, as shown herein, it has certain limitations compared to SIMS. Finally, the surface topography was investigated by employing atomic force microscopy (AFM) in order to carry out a comprehensive surface analysis. .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab Initio Structures and Energetics of Hydrated Flat and Terrace-Step Surfaces of Forsterite (Mg 2 SiO 4 )

Forsterite (Mg 2 SiO 4 ), a model divalent metal silicate mineral, has been extensively studied in the context of mineral carbonation. Although dissolution is a key step in this process, the mechanisms by which forsterite dissolves under high CO 2 conditions remain poorly understood. Atomistic simulations could aid in exploring these mechanisms, but it is essential first to understand the structures and energetics of the relevant forsterite surfaces. We present an ab initio study of the structure and surface energy at 0 K of the flat $(010), (110), (001), (111), (021), (101)$ and $(120)$ faces of forsterite using the density functional PBE Hamiltonian and a plane-wave basis set. Dry surfaces became stabilized upon hydration through the formation of bonds between surface Mg and O from water, as well as by the formation of hydrogen bonds. According to surface energy values, the stability order of the hydrated forsterite faces was found to be $(120) < (101) < (021) < (111) < (001) < (110) < (010)$. We also investigated the energetics of the terrace-step $(0\bar{41})$ surface as a model site for forsterite dissolution. Among all the facets, the $(0\bar{41})$ surface is the least stable termination in water. Hydration of Mg atoms on the $(0\bar{41})$ surface increases their susceptibility to dissolution. The presence of a step and its hydration destabilizes the terraces, making step retreat more likely than a dissolution front advancing along the [010] direction. This research will support future simulations to investigate forsterite dissolution in water under CO 2 -rich conditions.

PBE Hamiltonian↗

Segregation resistant perovskite oxides with surface modification

A method and a composition to stabilize the surface cation chemistry of the perovskite or related oxides, and thus, to minimize or completely avoid the detrimental segregation and phase separation of dopant cations at the surface can include modifying the surface with more oxidizable metal cations and/or more oxidizable metal oxides, thereby reducing the oxygen vacancy concentration at the very surface.

Yildiz, Bilge↗

Operation-Induced BiVO4 Surface Reconstruction Modulates Photoelectrochemical Glycerol Photooxidation Stability and Activity

Abstract Operation-induced surface reconstruction of photoelectrodes is underexplored as a path to control stability and performance. We show how adaptive junctions form via surface reconstruction of BiVO4 during glycerol photooxidation and how these surfaces affect electrolyte-dependent kinetics and durability. Preferential V dissolution in both acidic and alkaline media forms a Bi-rich layer. In situ measurements through a dual-working-electrode platform quantify the changes in photovoltage and charge-transfer resistance derived from adaptive junction formation, while enabling quantitative separation of the driving forces for charge separation and interfacial catalysis. The reconstructed surface in acidic media improves hole-transfer kinetics, functions as a glycerol-oxidation catalyst, and imparts photostability. Surface reconstruction in alkaline media exhibits the opposite behavior, impeding hole injection. This instability is mitigated by trace Ni2+ ions, which drive in situ surface activation without cocatalyst pre-deposition. This study shows the significance of surface reconstruction in the design of durable photoelectrodes for applications targeting organic electro-oxidation.

Yang, Jin Wook↗

Morphological stability of the atomically clean surface of silicon (100) crystals after microwave plasma-chemical processing

The morphological stability of atomically clean silicon (100) surface after low-energy microwave plasma-chemical etching in various plasma-forming media is studied. It is found that relaxation changes in the surface density and atomic bump heights after plasma processing in inert and chemically active media are multidirectional in character. After processing in a freon-14 medium, the free energy is minimized due to a decrease in the surface density of microbumps and an increase in their height. After argon-plasma processing, an insignificant increase in the bump density with a simultaneous decrease in bump heights is observed. The physicochemical processes causing these changes are considered.

36 MATERIALS SCIENCE↗

Investigation of the Tribological Properties of AlxSi-1.2Fe(Mn) (x = 5-13 wt.%) Alloys

The effect of Fe-impurity and Mn modification on the sliding wear behavior of Al-xSi-1.2Fe(Mn) (x = 5-13 wt.%) alloys was investigated in dry sliding against AISI 52100 steel. According to the results, in the Si range of 5-9 wt.%, Fe-impurity promotes the formation of finely distributed β-Al{sub 5}FeSi intermetallics in the matrix increasing its hardness and potential to support the tribolayer leading to the improved wear characteristics. The presence of Fe in the composition of Al-(9-13)Si alloys, however, leads to the formation of primary β-platelets that their sizes and volume fractions increase with Si concentration. The formation of primary compounds increases the hardness, but makes the alloys less ductile and more vulnerable to microcracking and wear. Manganese modification converts the β-Fe platelets to the α-Al{sub 15}(Fe,Mn){sub 3}Si{sub 2} compounds with different morphologies. The substitution of fine β-platelets by α-Chinese scripts in Al-(5-9)Si-1.2FeMn alloys reduces the wear resistance, but the formation of primary α-compounds with star-like or polyhedral morphologies in Al-(9-13)Si-1.2FeMn alloys improves their wear characteristics. Moreover, it was found that the formation of Fe(Mn)-rich compounds affects the friction coefficient which is likely due to the fracture of particles in the subsurface region, their interaction with contacting surfaces, and their effect on the stability of the tribolayer.

36 MATERIALS SCIENCE↗

Time integration for diffuse interface models for two-phase flow

We propose a variant of the θ-scheme for diffuse interface models for two-phase flow, together with three new linearization techniques for the surface tension. These involve either additional stabilizing force terms, or a fully implicit coupling of the Navier–Stokes and Cahn–Hilliard equation. In the common case that the equations for interface and flow are coupled explicitly, we find a time step restriction which is very different to other two-phase flow models and in particular is independent of the grid size. We also show that the proposed stabilization techniques can lift this time step restriction. Even more pronounced is the performance of the proposed fully implicit scheme which is stable for arbitrarily large time steps. We demonstrate in a Taylor-flow application that this superior coupling between flow and interface equation can decrease the computation time by several orders of magnitude.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermodynamic Stability of Molybdenum Oxycarbides Formed from Orthorhombic Mo 2 C in Oxygen-Rich Environments

Molybdenum carbide (Mo 2 C) nanoparticles and thin films are particularly suitable catalysts for catalytic fast pyrolysis (CFP) as they are effective for deoxygenation and can catalyze certain reactions that typically occur on noble metals. Oxygen deposited during deoxygenation reactions may alter the carbide structure, leading to the formation of oxycarbides, which can determine changes in catalytic activity or selectivity. Despite emerging spectroscopic evidence of bulk oxycarbides, so far there have been no reports of their precise atomic structure or their relative stability with respect to orthorhombic Mo 2 C. This knowledge is essential for assessing the catalytic properties of molybdenum (oxy)carbides for CFP. In this article, we use density functional theory (DFT) calculations to (a) describe the thermodynamic stability of surface and subsurface configurations of oxygen and carbon atoms for a commonly studied Mo-terminated surface of orthorhombic Mo 2 C and (b) determine atomic structures for oxycarbides with a Mo:C ratio of 2:1. The surface calculations suggest that oxygen atoms are not stable under the top Mo layer of the Mo 2 C(100) surface. Coupling DFT calculations with a polymorph sampling method, we determine (Mo 2 C) x O y oxycarbide structures for a wide range of oxygen compositions. Oxycarbides with lower oxygen content (y/x = 2) adopt layered structures reminiscent of the parent carbide phase, with flat Mo layers separated by layers of oxygen and carbon; for higher oxygen content, our results suggest the formation of amorphous phases, as the atomic layers lose their planarity with increasing oxygen content. We characterize the oxidation states of Mo in the oxycarbide structures determined computationally, and simulate their X-ray diffraction (XRD) patterns in order to facilitate comparisons with experiments. Our study may provide a platform for large-scale investigations of the catalytic properties of oxycarbides and their surfaces and for tailoring the catalytic properties for different desired reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗