Search NASA⌕ Search

SEARCH · Search NASA

Results for “system engineering program”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Fabrication of Composite Combustion Chamber/Nozzle for Fastrac Engine

The Fastrac Engine developed by the Marshall Space Flight Center for the X-34 vehicle began as a low cost engine development program for a small booster system. One of the key components to reducing the engine cost was the development of an inexpensive combustion chamber/nozzle. Fabrication of a regeneratively cooled thrust chamber and nozzle was considered too expensive and time consuming. In looking for an alternate design concept, the Space Shuttle's Reusable Solid Rocket Motor Project provided an extensive background with ablative composite materials in a combustion environment. An integral combustion chamber/nozzle was designed and fabricated with a silica/phenolic ablative liner and a carbon/epoxy structural overwrap. This paper describes the fabrication process and developmental hurdles overcome for the Fastrac engine one-piece composite combustion chamber/nozzle.

Lawerence, T.↗
NASA NTRS2001

Fabrication of Composite Combustion Chamber/Nozzle for Fastrac Engine

The Fastrac Engine developed by the Marshall Space Flight Center for the X-34 vehicle began as a low cost engine development program for a small booster system. One of the key components to reducing the engine cost was the development of an inexpensive combustion chamber/nozzle. Fabrication of a regeneratively cooled thrust chamber and nozzle was considered too expensive and time consuming. In looking for an alternate design concept, the Space Shuttle's Reusable Solid Rocket Motor Project provided an extensive background with ablative composite materials in a combustion environment. An integral combustion chamber/nozzle was designed and fabricated with a silica/phenolic ablative liner and a carbon/epoxy structural overwrap. This paper describes the fabrication process and developmental hurdles overcome for the Fastrac engine one-piece composite combustion chamber/nozzle.

Lawrence, T.↗
NASA NTRS1987

HIDEC adaptive engine control system flight evaluation results

An integrated flight propulsion control mode, the Adaptive Engine Control System (ADECS), has been developed and flight tested on an F-15 aircraft as part of the NASA Highly Integrated Digital Electronic Control program. The ADECS system realizes additional engine thrust by increasing the engine pressure ratio (EPR) at intermediate and afterburning power, with the amount of EPR uptrim modulated using a predictor scheme for angle-of-attack and sideslip angle. Substantial improvement in aircraft and engine performance was demonstrated, with a 16 percent rate of climb increase, a 14 percent reduction in time to climb, and a 15 percent reduction in time to accelerate. Significant EPR uptrim capability was found with angles-of-attack up to 20 degrees.

Yonke, W. A.↗
NASA NTRS1990

C++ and operating systems performance - A case study

Object-oriented design and programming has many software engineering advantages. Its application to large systems, however, has previously been constrained by performance concerns. The Choices operating system, which has over 75,000 lines of code, is object-oriented and programmed in C++. This paper is a case study of the performance of Choices.

Russo, Vincent F.↗
NASA NTRS1973

Shuttle cryogenics supply system. Optimization study. Volume 5 B-4: Programmers manual for space shuttle orbit injection analysis (SOPSA)

A computer program for space shuttle orbit injection propulsion system analysis (SOPSA) is described to show the operational characteristics and the computer system requirements. The program was developed as an analytical tool to aid in the preliminary design of propellant feed systems for the space shuttle orbiter main engines. The primary purpose of the program is to evaluate the propellant tank ullage pressure requirements imposed by the need to accelerate propellants rapidly during the engine start sequence. The SOPSA program will generate parametric feed system pressure histories and weight data for a range of nominal feedline sizes.

Source record↗
NASA NTRS2017

NASA's Space Launch System: Systems Engineering Approach for Affordability and Mission Success

NASA is working toward the first launch of the Space Launch System, a new, unmatched capability for deep space exploration with launch readiness planned for 2019. Since program start in 2011, SLS has passed several major formal design milestones, and every major element of the vehicle has produced test and flight hardware. The SLS approach to systems engineering has been key to the program's success. Key aspects of the SLS SE&I approach include: 1) minimizing the number of requirements, 2) elimination of explicit verification requirements, 3) use of certified models of subsystem capability in lieu of requirements when appropriate and 4) certification of capability beyond minimum required capability.

Hutt, John J.↗
NASA NTRS1995

PSC algorithm description

An overview of the performance seeking control (PSC) algorithm and details of the important components of the algorithm are given. The onboard propulsion system models, the linear programming optimization, and engine control interface are described. The PSC algorithm receives input from various computers on the aircraft including the digital flight computer, digital engine control, and electronic inlet control. The PSC algorithm contains compact models of the propulsion system including the inlet, engine, and nozzle. The models compute propulsion system parameters, such as inlet drag and fan stall margin, which are not directly measurable in flight. The compact models also compute sensitivities of the propulsion system parameters to change in control variables. The engine model consists of a linear steady state variable model (SSVM) and a nonlinear model. The SSVM is updated with efficiency factors calculated in the engine model update logic, or Kalman filter. The efficiency factors are used to adjust the SSVM to match the actual engine. The propulsion system models are mathematically integrated to form an overall propulsion system model. The propulsion system model is then optimized using a linear programming optimization scheme. The goal of the optimization is determined from the selected PSC mode of operation. The resulting trims are used to compute a new operating point about which the optimization process is repeated. This process is continued until an overall (global) optimum is reached before applying the trims to the controllers.

Nobbs, Steven G.↗
NASA NTRSDate not supplied

Open Innovation for a NASA Architecture Library

NASA’s Center of Excellence for Collaborative Innovation (CoECI) uses open innovation, or “crowdsourcing”, to access the global public to find ideas, concepts, designs, or solutions that meet a previously unmet need possibly resulting in significant advances in performance. The Center of Excellence for Collaborative Innovation was launched at the request of the White House Office of Science and Technology Policy. This is both a non-traditional method of innovation and a non-traditional method of outreach to the public to involve them in space technologies and programs. It has been used often for software development and new hardware technology. In this case we applied it to innovate with systems engineering tools for creating space architectures. The challenge was sponsored by NASA Engineering and Safety Center Systems Engineering Technical Fellow as part of a program for NASA’s adoption of MBSE. It was a trial to see if there would be as much participation or quality submissions with this more specialized topic and skill. The challenge sought space architecture representations and decompositions to create a library of modeled parts in a system modeling language (SysML). Mission architects mostly start from scratch to build model elements representing the functional and physical architecture of a system in SysML. There are a few beginning libraries, but these are also local to a program or group. A common library will save system engineers a large amount of time, will allow project stakeholders to recognize common graphics and quickly understand the architecture options. The challenge was promoted internationally, especially through professional organizations and universities with a systems engineering focus. It was open for 4 months, purposefully over the winter holiday break time to allow participants extra time outside of work or school. The challenge was designed so that expertise in space hardware was not necessary but getting to play with models of space architecture could provide motivation to participate. We did not receive as many entries as other broader outreach challenges, but the ones we received were extremely thorough and high quality. Solutions came from individuals and teams, students and professional consultants from the United States and Europe. We learned a few lessons about how to engage with the public and what characteristics of a problem result in good crowdsourcing results. The outreach challenge produced several useful ideas and modeled space elements, and the group will be engaging the winners to learn more about their new approaches.

innovation↗
NASA NTRS1974

The engineering design integration (EDIN) system

A digital computer program complex for the evaluation of aerospace vehicle preliminary designs is described. The system consists of a Univac 1100 series computer and peripherals using the Exec 8 operating system, a set of demand access terminals of the alphanumeric and graphics types, and a library of independent computer programs. Modification of the partial run streams, data base maintenance and construction, and control of program sequencing are provided by a data manipulation program called the DLG processor. The executive control of library program execution is performed by the Univac Exec 8 operating system through a user established run stream. A combination of demand and batch operations is employed in the evaluation of preliminary designs. Applications accomplished with the EDIN system are described.

Glatt, C. R.↗
NASA NTRS1986

Development of HIDEC adaptive engine control systems

The purpose of NASA's Highly Integrated Digital Electronic Control (HIDEC) flight research program is the development of integrated flight propulsion control modes, and the evaluation of their benefits aboard an F-15 test aircraft. HIDEC program phases are discussed, with attention to the Adaptive Engine Control System (ADECS I); this involves the upgrading of PW1128 engines for operation at higher engine pressure ratios and the production of greater thrust. ADECS II will involve the development of a constant thrust mode which will significantly reduce turbine operating temperatures.

Landy, R. J.↗
NASA NTRS2002

Conceptual Design of a Supersonic Business Jet Propulsion System

NASA's Ultra-Efficient Engine Technology Program (UEETP) is developing a suite of technology to enhance the performance of future aircraft propulsion systems. Areas of focus for this suite of technology include: Highly Loaded Turbomachinery, Emissions Reduction, Materials and Structures, Controls, and Propulsion-Airframe Integration. The two major goals of the UEETP are emissions reduction of both landing and take-off nitrogen oxides (LTO-NO(x)) and mission carbon dioxide (CO2) through fuel burn reductions. The specific goals include a 70 percent reduction in the current LTO-NO(x) rule and an 8 percent reduction in mission CO2 emissions. In order to gain insight into the potential applications and benefits of these technologies on future aircraft, a set of representative flight vehicles was selected for systems level conceptual studies. The Supersonic Business Jet (SBJ) is one of these vehicles. The particular SBJ considered in this study has a capacity of 6 passengers, cruise Mach Number of 2.0, and a range of 4,000 nautical miles. Without the current existence of an SBJ the study of this vehicle requires a two-phased approach. Initially, a hypothetical baseline SBJ is designed which utilizes only current state of the art technology. Finally, an advanced SBJ propulsion system is designed and optimized which incorporates the advanced technologies under development within the UEETP. System benefits are then evaluated and compared to the program and design requirements. Although the program goals are only concerned with LTO-NO(x) and CO2 emissions, it is acknowledged that additional concerns for an SBJ include take-off noise, overland supersonic flight, and cruise NO(x) emissions at high altitudes. Propulsion system trade-offs in the conceptual design phase acknowledge these issues as well as the program goals. With the inclusion of UEETP technologies a propulsion system is designed which performs at 81% below the LTO-NO(x) rule, and reduces fuel burn by 23 percent compared to the current technology.

Bruckner, Robert J.↗
NASA NTRS2009

Advanced Development Program for a 625 lbf thrust engine for Ares First Stage Roll Control System

NASA's new Ares Launch Vehicle will require twelve thrusters to provide roll control of the vehicle during the first stage firing. All twelve roll control thrusters will be located at the inter-stage segment that separates the solid rocket booster first stage from the second stage. NASA selected a mono propellant hydrazine solution and as a result awarded Aerojet-General a contract in 2007 for an advanced development program for an MR-80- series 625 Ibf vacuum thrust monopropellant hydrazine thruster. This thruster has heritage dating back to the 1976 Viking Landers and most recently for the 2011 Mars Science Laboratory. Prior to the Ares application, the MR-80-series thrusters had been equipped with throttle valves and not typically operated in pulse mode. The primary objective of the advanced development program was to increase the technology readiness level and retire major technical risks for the future flight qualification test program. Aerojet built on their heritage MR-80 rocket engine designs to achieve the design and performance requirements. Significant improvements to cost and lead-time were achieved by applying Design for Manufacturing and Assembly (DFMA) principles. AerojetGeneral has completed Preliminary and Critical Design Reviews, followed by two successful rocket engine development test programs. The test programs included qualification random vibration and firing lite that significantly exceed the flight qualification requirements. This paper discusses the advanced development program and the demonstrated capability of the MR-80C engine. Y;

Dawson, Matt↗
NASA NTRS1981

IPAD applications to the design, analysis, and/or machining of aerospace structures

A computer software system for the processing and integration of engineering data and programs, called IPAD (Integrated Programs for Aerospace-Vehicle Design), is described. The ability of the system to relieve the engineer of the mundane task of input data preparation is demonstrated by the application of a prototype system to the design, analysis, and/or machining of three simple structures. Future work to further enhance the system's automated data handling and ability to handle larger and more varied design problems are also presented.

Blackburn, C. L.↗
NASA NTRS2005

Template for Systems Engineering Tools Trade Study

A discussion of Systems Engineering tools brings out numerous preferences and reactions regarding tools of choice as well as the functions those tools are to perform. A recent study of Systems Engineering Tools for a new Program illustrated the need for a generic template for use by new Programs or Projects to determine the toolset appropriate for their use. This paper will provide the guidelines new initiatives can follow and tailor to their specific needs, to enable them to make their choice of tools in an efficient and informed manner. Clearly, those who perform purely technical functions will need different tools than those who perform purely systems engineering functions. And, everyone has tools they are comfortable with. That degree of comfort is frequently the deciding factor in tools choice rather than an objective study of all criteria and weighting factors. This paper strives to produce a comprehensive list of criteria for selection with suggestions for weighting factors based on a number of assumptions regarding the given Program or Project. In addition, any given Program will begin with assumptions for its toolset based on Program size, tool cost, user base and technical needs. In providing a template for tool selection, this paper will guide the reader through assumptions based on Program need; decision criteria; potential weighting factors; the need for a compilation of available tools; the importance of tool demonstrations; and finally a down selection of tools. While specific vendors cannot be mentioned in this work, it is expected that this template could serve other Programs in the formulation phase by alleviating the trade study process of some of its subjectivity.

Michelle D Bailey↗
NASA NTRS2019

Defining a Space Mission Architectural Framework: Guiding Robotic Space Mission Design and Development at NASA Goddard Spaceflight Center

Modern Systems Engineering activities for robotic science missions face increased complexity due to evolving measurement requirements, increased collaboration amongst stakeholders and increased collaboration between human and robotic systems. While NASA has employed standard process frameworks for project management and systems engineering for years, it has not yet established an architecture framework (AF) by which its mission systems are described. While an architecture framework is not a necessary component of an organization's operations, the value of a specified AF greatly enhances an organization's ability to define systems consistently and aid in communication across project and organizational boundaries. The current effort identifies an approach to establishing a Space Mission Architecture Framework (SMAF), an AF with roots in ISO 42010 (Systems and Software Engineering-Architecture Description), NASA Procedural Requirements (NPR) 7120.5 (NASA Space Flight Program and Project Management Requirements) and 7123.1B (NASA Systems Engineering Processes and Requirements). The heart of the AF lies in its viewpoints and work products, artifacts that represent a set of information from the viewpoint of a particular stakeholder. This effort articulates the needs, goals and objectives that the SMAF addresses, as well as the approach to creating the framework and establishing the various work products. A full set of work products, sufficient to satisfy the Mission System reporting requirements of NPR 7120/7123 at Key Decision Point (KDP) A is identified in this paper.

Architecture↗
NASA NTRS2014

Rocket University at KSC

"Rocket University" is an exciting new initiative at Kennedy Space Center led by NASA's Engineering and Technology Directorate. This hands‐on experience has been established to develop, refine & maintain targeted flight engineering skills to enable the Agency and KSC strategic goals. Through "RocketU", KSC is developing a nimble, rapid flight engineering life cycle systems knowledge base. Ongoing activities in RocketU develop and test new technologies and potential customer systems through small scale vehicles, build and maintain flight experience through balloon and small‐scale rocket missions, and enable a revolving fresh perspective of engineers with hands on expertise back into the large scale NASA programs, providing a more experienced multi‐disciplined set of systems engineers. This overview will define the Program, highlight aspects of the training curriculum, and identify recent accomplishments and activities.

Training↗