Search NASA⌕ Search

SEARCH · Search NASA

Results for “tearing mode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

Impact of Magnetic Draping, Convection, and Field Line Tying on Magnetopause Reconnection Under Northward IMF

We simulate a northward IMF cusp reconnection event at the magnetopause using the OpenGGCM resistive MHD code. The ACE input data, solar wind parameters, and dipole tilt belong to a 2002 reconnection event observed by IMAGE and Cluster. Based on a fully three-dimensional skeleton separators, nulls, and parallel electric fields, we show magnetic draping, convection, ionospheric field line tying play a role in producing a series of locally reconnecting nulls with flux ropes. The flux ropes in the cusp along the global separator line of symmetry. In 2D projection, the flux ropes the appearance of a tearing mode with a series of 'x's' and 'o's' but bearing a kind of 'guide field' that exists only within the magnetopause. The reconnecting field lines in the string of ropes involve IMF and both open and closed Earth magnetic field lines. The observed magnetic geometry reproduces the findings of a superposed epoch impact parameter study derived from the Cluster magnetometer data for the same event. The observed geometry has repercussions for spacecraft observations of cusp reconnection and for the imposed boundary conditions reconnection simulations.

Wendel, Deirdre E.↗
NASA NTRS2010

Evidence of a Plasmoid-Looptop Interaction and Magnetic Inflows During a Solar Flare/Coronal Mass Ejection Eruptive Event

Observational evidence is presented for the merging of a downward-propagating plasmoid with a looptop kernel during an occulted limb event on 2007 January 25. RHESSI light curves in the 9-18 keV energy range, as well as that of the 245 MHz channel of the Learmonth Solar Observatory, show enhanced nonthermal emission in the corona at the time of the merging suggesting that additional particle acceleration took place. This was attributed to a secondary episode of reconnection in the current sheet that formed between the two merging sources. RHESSI images were used to establish a mean downward velocity of the plasmoid of 12 km/s. Complementary observations from the SECCHI suite of instruments on board STEREO-B showed that this process occurred during the acceleration phase of the associated coronal mass ejection (CME). From wavelet-enhanced EUV Imager, image evidence of inflowing magnetic field lines prior to the CME eruption is also presented. The derived inflow velocity was found to be 1.5 km/s. This combination of observations supports a recent numerical simulation of plasmoid formation, propagation, and subsequent particle acceleration due to the tearing mode instability during current sheet formation.

Milligan, Ryan O.↗
NASA NTRS2011

Pulsed Flows Along a Cusp Structure Observed with SOO/AIA

We present observations of a cusp-shaped structure that formed after a flare and coronal mass ejection on 14 February 2011. Throughout the evolution of the cusp structure, blob features up to a few Mm in size were observed flowing along the legs and stalk of the cusp at projected speeds ranging from 50 to 150 km/sec. Around two dozen blob features, on order of 1 - 3 minutes apart, were tracked in multiple AlA EUV wavelengths. The blobs flowed outward (away from the Sun) along the cusp stalk, and most of the observed speeds were either constant or decelerating. We attempt to reconstruct the 3-D magnetic field of the evolving structure, discuss the possible drivers of the flows (including pulsed reconnect ion and tearing mode instability), and compare the observations to studies of pulsed reconnect ion and blob flows in the solar wind and the Earth's magnetosphere.

Thompson, Barbara↗
NASA NTRS2015

Orientation of X Lines in Asymmetric Magnetic Reconnection-Mass Ratio Dependency

Using fully kinetic simulations, we study the X line orientation of magnetic reconnection in an asymmetric configuration. A spatially localized perturbation is employed to induce a single X line, which has sufficient freedom to choose its orientation in three-dimensional systems. The effect of ion to electron mass ratio is investigated, and the X line appears to bisect the magnetic shear angle across the current sheet in the large mass ratio limit. The orientation can generally be deduced by scanning through the corresponding 2-D simulations to find the reconnection plane that maximizes the peak reconnection electric field. The deviation from the bisection angle in the lower mass ratio limit is consistent with the orientation shift of the most unstable linear tearing mode in an electron-scale current sheet.

Reconnection↗
NASA NTRS2019

Thin Current Sheets of Sub-Ion Scales Observed by MAVEN in the Martian Magnetotail

Current sheets (CSs) play a crucial role in the storage and conversion of magnetic energy in planetary magnetotails. Using high‐resolution magnetic field data from MAVEN spacecraft, we report the existence of super thin current sheets (STCSs) in the Martian magnetotail. The typical half‐thickness of the STCSs is ~5 km, and it is much less than the gyroradius of thermal protons (ρp). The STCSs are embedded into a thicker sheet with L ≥ ρp forming a multiscale current configuration. The formation of STCS does not depend on ion composition, but it is controlled by the small value of the normal component of the magnetic field at the neutral plane (BN). A number of the observed multiscale CSs are located in the parametric map close to the tearing‐unstable domain, and thus, the inner STCS can provide an additional free energy to excite ion tearing mode in the Martian magnetotail.

Martian↗
NASA NTRS2019

Near-Sun Observations of an F-Corona Decrease and K-Corona Fine Structures

Remote observations of the solar photospheric light scattered by electrons (K-corona) and dust (F-corona/Zodiacal light) have been made from the ground during eclipses and from space at 1 AU and as close as 0.3 AU. Previous observations of dust scattering have not confirmed the existence of a theoretically-predicted dust free zone near the Sun. The transient nature of the corona has been well characterized for large events, but questions still remain (e.g. initiation, production of solar energetic particles) and for small events even the structure is uncertain. Here we report on imaging the solar corona, from the Parker Solar Probe spacecraft, during the first two perihelion passes (0.16-0.25 AU), each of ten days duration. The view from these distances is qualitatively similar to the historical view, but there are some significant differences in the details. We have uncovered at short elongations a decrease in the intensity of the F-coronal intensity, which is suggestive of the long-sought dust free zone. Also we have resolved the plasma structure of very small eruptions, which are being frequently ejected from the Sun. They take two forms - the commonly observed magnetic flux ropes or the predicted, but not yet observed, magnetic islands arising from the tearing mode instability in the current sheet. Our observations of the coronal streamer evolution confirm the large-scale topology of the solar corona, but they also reveal that, as recently predicted, streamers are composed of yet smaller sub-streamers channeling continual density fluctuations at all visible scales.

Astronomy and astrophysics↗
DOE OSTI2026

Macroscopic trends of neoclassical tearing stability in high-field H-mode tokamak pilot plants

The neoclassical tearing mode (NTM) stability metric—minimum marginally stable island width $w$$^{*}_{m}$—was compared across 14651 inductive high-field tokamak pilot plant equilibria. Larger devices with reduced elongation and/or increased minor radius demonstrated an order-of-magnitude increase in $w$$^{*}_{m}$, primarily due to a reduction in bootstrap drive. This work is part of an ongoing effort to ensure passive NTM-stability in the ARC tokamak, in which the technology to achieve active tearing-suppression with localised electron cyclotron current drive does not yet exist. The equilibrium scenarios in the database were Monte Carlo generated and normalised to the same >400MW fusion power, minimum pressure scenario at a range of plasma currents, before tearing analysis using the modified Rutherford equation was applied for all resonant poloidal and toroidal m, n modes up to n = 4. Single-helicity toroidal Δ' calculations in resistive DCON set the minimum marginally stable island width, and a simple modal scaling proportional to –m 2 n –1 was identified for high-m Δ' values. The dominant correlates of $w$$^{*}_{m}$ and Δ' across the database were analysed using interpretable machine learning techniques.

NTM seeding↗
DOE OSTI2025

Designing a validation experiment for radio frequency condensation

Abstract Theoretical studies have suggested that nonlinear effects can lead to ‘radio frequency (RF) condensation’, where an initially broad current profile can coalesce in islands when they reach sufficient width. In suitable conditions, RF condensation can ‘self-focus’ the driven current to the center of an island, improving stabilization efficiency and reducing control complexity. In unsuitable conditions, the effect can prematurely deplete the RF energy before it reaches the island center, impairing stabilization. It is predicted that the RF condensation effect can significantly impact reactor-scale tokamaks. This paper presents a set of simulations investigating the conditions under which RF condensation might be encountered in present-day tokamaks. For concreteness, the calculations use equilibrium reconstructions for two shots from DIII-D and AUG. The Current Condensation Amid Magnetic Islands (OCCAMI) simulation code has been used for this investigation. The code takes as its input a numerically specified axisymmetric EFIT equilibrium solution, and it perturbatively constructs a 3D field with an island embedded at the appropriate rational surface. In the OCCAMI code, the GENRAY code is used for ray tracing and for calculating the power deposition along a ray trajectory, and GENRAY is coupled self-consistently to a solution of the thermal diffusion equation in the island. The simulation results described in the paper illuminate the conditions required for experimental validation of the theory of RF condensation. The simulations also provide an explanation of why the effect was not noticed in experiments prior to the publication of theoretical papers on the subject.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

First observation of unlocking the locked mode by electrode biasing on J-TEXT tokamak

Major disruptions, often caused by locked m/n = 2/1 modes (m/n is the poloidal/toroidal mode number), are great threat to a tokamak fusion reactor and should be mitigated or avoided. The locked 2/1 modes have been unlocked by electrode biasing (EB) for the first time in J-TEXT tokamak experiments. Furthermore, the application of a sufficiently negative EB voltage in plasma edge region quickly changes the phase and amplitude of the locked 2/1 mode and drives the mode to rotate in about 10–30 ms. For a larger EB current or a smaller locked mode amplitude, the mode is more easily to be unlocked, revealing a new method for mode unlocking and avoiding plasma disruptions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

On resistive interchange, double tearing, and resonant and non-resonant infernal modes in spherical tokamak negative central shear discharges

We examine the linear and nonlinear stability of a sequence of reversed shear NSTX equilibria with the same toroidal current density and pressure profile but with different toroidal field strengths. All equilibria have two q = 2 surfaces and have q > 1 everywhere. For this sequence, which all have β P ∼ 0.5, as the minimum value of q decreases below about 1.4, the localized resistive interchange criterion is strongly violated, and the unstable mode with toroidal mode number n=1 changes its dominant poloidal mode number m from a (m,n)=(2,1) double tearing mode to a non-resonant (1,1) infernal mode. This (1,1) mode nonlinearly flattens both the current density and the pressure near the magnetic axis. The higher-n unstable modes are all resistive infernal modes localized around the surface where q has a minimum and the magnetic shear vanishes. They generally saturate nonlinearly at low amplitude but can cause magnetic surface breakup near the axis.

Spitzer resistivity↗
DOE OSTI2020

Analysis of MHD stability and active mode control on KSTAR for high confinement, disruption-free plasma

Long-pulse plasma operation at high normalized beta, $β_N$, above the $\textit{n}$= 1 ideal MHD no-wall stability limit in KSTAR is presently limited by tearing instabilities rather than resistive wall modes. H-mode plasma operation during the recent KSTAR device campaign produced discharges having strong $\textit{m/n}$= 2/1 tearing instabilities at $β_N$ lower than the ideal MHD no-wall beta limit. The unstable tearing mode consequently reduced plasma confinement and toroidal plasma rotation significantly. We report the experiment confirmed that an extended duration of electron cyclotron heating (ECH) at the initial phase of the discharge plays a critical role in mode destabilization. To study destabilizing mechanisms that affect the mode growth, the stability of the observed tearing modes from plasmas with significantly different $β_N$ is computed by using the resistive DCON code and the M3D-C 1 code. Equilibrium reconstructions that include constraints from internal profile diagnostics, and computed fast particle pressure are used as input for reliable computation of stability. The classical tearing stability index, Δ', from resistive DCON is computed to be unstable when the island is fully saturated with large amplitude, while the unstable mode is not computed by M3D-C 1 . The modified Rutherford equation (MRE) describing the evolution of the island width has been constructed for KSTAR plasmas by using plasma parameters computed by the TRANSP code. The MRE model estimates a saturated island width corresponding to ~10% of the plasma minor radius for equilibrium at high $β_N$ 3 having a stable Δ' from the resistive DCON. In preparation for long-pulse plasma operation at higher beta utilizing increased plasma heating power, a resistive wall mode (RWM) active feedback control algorithm has been completed and enabled on KSTAR. To accurately determine the $\textit{n}$= 1component produced by RWMs, an algorithm has been developed that includes magnetic sensor compensation of the prompt applied field and the field from the induced current on the passive conductors. Use of multiple toroidal sensor arrays is enabled by modifying the sensor toroidal angles assumed in mode decomposition to include the effect of varied mode helicities in the outboard region where the mode measurement is made. This analysis on stability, transport, and control provides the required foundation for disruption prediction and avoidance research on KSTAR.

resistive wall mode (RWM)↗
DOE OSTI2021

Active control of resistive wall mode via modification of external tearing index

Modification of the external tearing index, Δ ext ′ , by magnetic feedback is analytically investigated for the purpose of controlling the resistive plasma resistive wall mode (RP-RWM). The matching method is pursued by deriving expressions for the close-loop Δ ext ′ and by linking it to the counterpart from the inner layer. Various feedback coil configurations are found to generally reduce Δ ext ′ and stabilize the RWM, with either proportional or derivative control. Feedback modification of Δ ext ′ is found to be generally independent of the inner layer resistive interchange index D R , confirming that feedback action primarily modifies the solution in the outer ideal region for the RP-RWM. Exception occurs when either the inner layer favorable curvature effect becomes sufficiently large or the feedback action is sufficiently strong to introduce a rotating RP-RWM in the static plasma, leading to complex-valued close-loop Δ ext ′ . The perturbed magnetic energy dissipation in the outer region, associated with the eddy current in the resistive wall, is identified as the key physics reason for feedback induced complex Δ ext ′ . Similar results are also obtained for active control of the external kink instability, whose open-loop growth rate is significantly reduced by inclusion of the plasma resistivity. Within the single poloidal harmonic approximation, which is most suitable for the matching approach, external active coils combined with poloidal sensors are often found to be more efficient for feedback stabilization of the mode at large proportional gain values. This counter-intuitive result is explained as the lack of (non-resonant) poloidal harmonics for proper description of the feedback coil geometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2022

A Cohesive Element Formulation for Simulation of General Mode I, II and III Delamination

Cohesive element formulations proposed thus far have assumed that Mode II and Mode III fracture processes, and hence traction-separation laws, are identical. However, experimental observations suggest that such an assumption may not hold in general. The approach described herein consists of a cohesive element formulation in which the assumption of identical Mode II and Mode III fracture processes is not required. This assumption is alleviated by estimating the normal to the delamination front based on the gradient of the displacement jumps determined within each element. The estimated normal is used to rotate the cohesive element coordinate system. Determining the displacement jumps in the rotated coordinate system enables the distinction between Mode II sliding, and Mode III tearing. This information is subsequently used to extend a recently proposed cohesive formulation, resulting in an approach that can simulate mixed-mode I/II/III fracture via prescribing piecewise-linear traction-separation laws combined with a 3D mixed-mode fracture criteria.

Delamination↗
NASA NTRS1988

Does the resistive tearing instability nonlinearly evolve to a fast reconnection mode

A fundamental problem in applying linear tearing instability theory to the rapid processes (particle acceleration, heating) in flares was the characteristically slow rate of reconnection. This problem can be at least partially overcome if the tearin mode nonlinearly evolves to a regime in which the reconnection rate is substantially enhanced, such as that for the Petschek configuration. This possibility was often suggested, and some numerical simulations appear to provide support for such a view. Numerical simulation are used to study the nonlinear evolution of the tearing stability and show that a fast Petschek-like regime may not be achieved. This conclusion follows when there are sufficient grid points within the diffusion region to completely resolve the nonlinear dynamic interactions in the diffusion layer. When the numerical resolution is not adequate, the solution does appear to approach a Petschek configuration. The resolved solution contains reverse flow vortices and current sheets, terminated with a current reversal, similar to those obtained by Syrovatsky (JEPT, 33, 933, 1971).

Steinolfson, R. S.↗
DOE OSTI2023

Pressure-driven tearing and thermal transport in finite-beta reversed field pinch computations

In this work, nonlinear resistive-magnetohydrodynamics (MHD) computation with heating and anisotropic transport is applied to examine the interaction between thermal energy and magnetic fluctuations in inductively driven reversed-field pinches (RFPs). The magnetic fluctuations underlie magnetic field reversal through dynamo-like correlations, and they enhance thermal energy transport through fluctuations of parallel heat flux density. With the unfavorable magnetic curvature that exists across the RFP profile, thermal energy also affects the magnetic fluctuations. Computations with the NIMROD code [Sovinec et al., J. Comput. Phys. 195, 355–386 (2004)] integrate nonlinear MHD dynamics with energy transport and reproduce an RFP state with experimentally relevant values of plasma-β. Equilibria constructed from results of the 3D computations are analyzed to assess the sources of free energy in the saturated nonlinear state. Linear computations for these profiles show unstable modes of tearing parity. Their eigenfunctions are used to evaluate and compare stabilizing and destabilizing contributions to the kinetic energy integral. An assessment of the drives in the integral reveals that the pressure gradient drive is of comparable magnitude to the parallel current drive, and only the sum of the two surpasses the stabilizing contributions. Correlation of magnetic and parallel heat flux density fluctuations in the nonlinear computations shows that fluctuation-induced thermal conduction is the dominant mode of energy loss, as expected from experimental evidence. Decomposition of the fluctuating heat flux density shows that second-order correlations, alone, do not explain the total energy transport. Higher-order correlations are also important.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Measurement of small island characteristics using high resolution ECE and CER at DIII-D

Abstract The measurements using the high resolution electron cyclotron emission radiometry and the charge exchange and recombination spectroscopy are processed using analytic formulas to allow for the detection of islands as small as 1.9 cm. In contrast to large, saturated magnetic islands which are relatively well understood to be governed by the loss of bootstrap current inside the island, small islands are less well understood due to the difficulty of their accurate measurement in tokamaks. Here, ‘small’ islands are islands comparable in size to the ion banana width, which can be as small as 0.8 cm at DIII-D. The new measurement methods allow for the detection of small island widths when the predicted increase of mode frequency to match the Doppler shifted ion diamagnetic frequency is observed. Therefore, for the first time, the mode frequency increase can be unambiguously associated to the acceleration of the magnetic island propagation. Such association allows for a further development and validation of the much-debated theory of ion polarization currents, which is thought to govern the small island growth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Implications of a two-fluid heat diffusion model for RF condensation effects in magnetic islands

Theoretical calculations have predicted an “RF condensation” effect through which the temperature perturbation and current drive may be nonlinearly enhanced in electron cyclotron (EC) heated magnetic islands. Previously, two-fluid effects had been neglected in the OCCAMI code used to model RF condensation. For realistic experimental conditions, we show that two-fluid effects in an EC heated plasma may have a major impact on RF condensation. Less collisional plasmas, where electron and ion temperatures are decoupled, exhibit an enhanced linear temperature perturbation in the island, and an even stronger nonlinear enhancement of the perturbed temperature. This can occur even when nonlinear effects are small in the single-fluid limit. We also calculate corresponding hysteresis effects. Finally, we demonstrate that other physical effects, including the rotation of the magnetic island and the Gaussian spread of the beam from a gyrotron, can significantly decrease the predicted observable RF condensation effect.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Nonlinear growth of magnetic islands by passing fast ions in NSTX

The growth of magnetic islands in NSTX is modeled successfully, with the consideration of passing fast ions. It is shown that a good quantitative agreement between simulation and experimental measurement can be achieved when the uncompensated cross-field current induced by passing fast ions is included in the island growth model. The fast ion parameters, along with other equilibrium parameters, are obtained self-consistently using the TRANSP code with the assumptions of the 'kick' model (Podestà et al 2017 Plasma Phys. Control. Fusion 59 095008). Overall, the results show that fast ions can contribute to overcoming the stabilizing effect of polarization current for magnetic island growth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗