Search NASA⌕ Search

SEARCH · Search NASA

Results for “thermal interaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Thermal phases of the interstellar medium in galaxies

This review deals with the theory of multiphase media in astrophysical systems. The basic reasons for the existence of multiple thermal phases, and the fundamental connection between multiphase media and thermal instability are discussed. Important examples of multiphase media are described, and the interactions among phases, i.e., mass exchange driven by thermal conduction and hydrodynamic ablation are examined. Mass exchange may compete with radiative heating and cooling for control of the thermal state of the hot phase, and may alter the thermal stability properties of the system.

Begelman, Mitchell C.↗
NASA NTRS1993

Isolator-combustor interaction in a dual-mode scramjet engine

A constant-area diffuser, or 'isolator', is required in both the ramjet and scramjet operating regimes of a dual-mode engine configuration in order to prevent unstarts due to pressure feedback from the combustor. Because the nature of the combustor-isolator interaction is different in the two operational modes, however, attention is presently given to the use of thermal vs kinetic energy coordinates for these interaction processes' visualization. The results of the analysis thus conducted indicate that the isolator requires severe flow separation at combustor entry, and that its entropy-generating characteristics are more severe than an equivalent oblique shock. A constant-area diffuser is only marginally able to contain the equivalent normal shock required for subsonic combustor entry.

Pratt, David T.↗
NASA NTRS1974

Liquid rocket engine combustion stabilization devices

Combustion instability, which results from a coupling of the combustion process and the fluid dynamics of the engine system, was investigated. The design of devices which reduce coupling (combustion chamber baffles) and devices which increase damping (acoustic absorbers) are described. Included in the discussion are design criteria and recommended practices, structural and mechanical design, thermal control, baffle geometry, baffle/engine interactions, acoustic damping analysis, and absorber configurations.

Source record↗
NASA NTRS1977

Status of the NASA Space Power Program

The NASA Space Power Research and Technology Program has the objective to provide the technological basis for satisfying the nation's future needs regarding electrical power in space. The development of power sources of low mass and increased environmental resistance is considered. Attention is given to advances in the area of photovoltaic energy conversion, improved Ni-Cd battery components, a nickel-hydrogen battery, remotely activated silver-zinc and lithium-water batteries, the technology of an advanced water electrolysis/regenerative fuel cell system, aspects of thermal-to-electric conversion, environmental interactions, multi-kW low cost systems, and high-performance systems.

Mullin, J. P.↗
NASA NTRS1978

Energetic secondary electrons and the nonthermal galactic radio background - A probe of the magnetic field in interstellar clouds

A previous analysis of the manifestations of charged-pion-decay secondary electrons in interstellar cloud material is extended to include those contributions to the Galactic radio and soft gamma-ray backgrounds that are directly attributable to energetic secondaries. The equilibrium distribution of secondary electrons in dense interstellar clouds is calculated, synchrotron emissivity from isolated interstellar clouds is examined, and it is shown how the value of the magnetic field in these clouds may be determined by observing the radio emission in their directions. The contribution that such clouds make to the integrated radio background is evaluated, and the Galactic distribution of bremsstrahlung gamma rays that arise from interactions of secondary electrons with thermal material in dense clouds is computed. The results indicate that a magnetic field of no more than 80 microgauss is characteristic of dense clouds and that the integrated synchrotron radiation from secondary electrons in interstellar clouds will contribute a significant fraction of the nonthermal brightness along the Galactic equator even if the mean cloud field is as low as 35 microgauss.

Marscher, A. P.↗
NASA NTRS1978

Electrical Prototype Power Processor for the 30-cm Mercury electric propulsion engine

An Electrical Prototpye Power Processor has been designed to the latest electrical and performance requirements for a flight-type 30-cm ion engine and includes all the necessary power, command, telemetry and control interfaces for a typical electric propulsion subsystem. The power processor was configured into seven separate mechanical modules that would allow subassembly fabrication, test and integration into a complete power processor unit assembly. The conceptual mechanical packaging of the electrical prototype power processor unit demonstrated the relative location of power, high voltage and control electronic components to minimize electrical interactions and to provide adequate thermal control in a vacuum environment. Thermal control was accomplished with a heat pipe simulator attached to the base of the modules.

Biess, J. J.↗
NASA NTRS1978

The NASA space power technology program

The objective and planning of the NASA space power research and technology program are reviewed. The areas of research covered include photovoltaic energy conversion, chemical energy conversion and storage, thermal to electric conversion, environmental interactions and power systems management of distribution.

Mullin, J. P.↗
NASA NTRS1980

Evaluation of NESS soundings used in the FGGE special effort

A special effort to produce high quality edited and enhanced global data sets is being conducted for the two special observing periods of the first GARP global experiment. More than 60 cases were selected for enhancement on the basis of meteorological interest. These cases include situations of blocking, cut off low development, cyclogenesis, and tropical circulations. The sounding data enhancement process consists of supplementing the operational satellite sounding data set with higher resolution sounding in meteorologically active regions and with new soundings where data voids or soundings of questionable quality exist. After the enhancement process is completed, a final editing and quality assessment of the enhanced data are performed. The data is archived for further analyses. Subjective evaluation of the effects of sounding data enhancement indicate that: (1) enhanced and operational IR retrievals are similar in most situations; (2) large improvements in 1000 to 300 mb thickness and mandatory level temperature and intensification of atmospheric thermal gradients occasionally occur; (3) interactive processing can fill in major gaps in the TIROS-N coverage; and (4) assimilation of special effort soundings can result in major modifications to large scale analyses and prognoses.

Atlas, R.↗
NASA NTRS1982

A simplified design procedure for life prediction of rocket thrust chambers

An analytical procedure for predicting thrust chamber life is developed. The hot-gas-wall ligaments separating the coolant and combustion gas are subjected to pressure loading and severe thermal cycling. The resulting stresses interact during plastic straining causing incremental bulging of the ligaments during each firing cycle. This mechanism of plastic ratcheting is analyzed and a method using a yield surface for combined bending and membrane loading developed for determining the incremental permanent deflection and progressive thinning near the center of the ligaments. Fatigue and tensile instability are analyzed as possible failure modes. Results of the simplified analyses compare favorably with available experimental data and finite element analysis results for OFHC (Oxygen Free High Conductivity) copper. They are also in reasonably good agreement with experimental data for NARloy Z, a copper-zirconium-silver alloy developed by the Rocketdyne Division of Rockwell International.

Porowski, J. S.↗
NASA NTRS1990

A study of the sensitivity of an imaging telescope (GRITS) for high energy gamma-ray astronomy

When a gamma-ray telescope is placed in Earth orbit, it is bombarded by a flux of cosmic protons much greater than the flux of interesting gammas. These protons can interact in the telescope's thermal shielding to produce detectable gamma rays, most of which are vetoed. Since the proton flux is so high, the unvetoed gamma rays constitute a significant background relative to some weak sources. This background increases the observing time required to pinpoint some sources and entirely obscures other sources. Although recent telescopes have been designed to minimize this background, its strength and spectral characteristics were not previously calculated in detail. Monte Carlo calculations are presented which characterize the strength, spectrum and other features of the cosmic proton background using FLUKA, a hadronic cascade program. Several gamma-ray telescopes, including SAS-2, EGRET and the Gamma Ray Imaging Telescope System (GRITS), are analyzed, and their proton-induced backgrounds are characterized. In all cases, the backgrounds are either shown to be low relative to interesting signals or suggestions are made which would reduce the background sufficiently to leave the telescope unimpaired. In addition, several limiting cases are examined for comparison to previous estimates and calibration measurements.

Yearian, Mason R.↗
NASA NTRS1992

Dust transport into Martian polar latitudes

The presence of suspended dust in the Martian atmosphere, and its return to the planet's surface, is implicated in the formation of the polar layered terrain and the dichotomy in perennial CO2 polar cap retention in the two hemispheres. A three dimensional model was used to study Martian global dust storms. The model accounts for the interactive feedbacks between the atmospheric thermal and dynamical states and an evolving radiatively active suspended dust load. Results from dust storm experiments, as well as from simulations in which there is interest in identifying the conditions under which surface dust lifting occurs at various locations and times, indicate that dust transport due to atmospheric eddy motions is likely to be important in the arrival of suspended dust at polar latitudes. The layered terrain in both polar regions of Mars is interpreted as the reality of cyclical episodes of volatile (CO2, H2O) and dust deposition.

Murphy, J. R.↗
NASA NTRS1993

Static galactic halo and galactic wind

Although the exact state of the interstellar medium (ISM) in our Galaxy (other galaxies as well) is not clear at all, the 'common consensus' is that a rough pressure balance (or equipartition of energy) exists between different components and phases: cold, warm, hot phases of the ISM, magnetic field, cosmic rays, etc. If the halo of a galaxy is taken to be an extension of the ISM, then its structure is influenced by various ISM components. A 'complete' description of the halo is evidently very complicated. This paper gives a brief account on cosmic ray halo, which emphasizes the role played by cosmic rays. The interaction between cosmic rays and thermal plasma is facilitated by magnetic field. The cosmic rays are scattered by hydromagnetic waves (e.g., Alfven waves) which in turn can be generated by cosmic ray streaming instability. This constitutes a self-consistent picture. Since we are interested in the structure of the halo, we adopted a hydrodynamic model in which the cosmic rays and waves are described by their pressures. In general there are two classes of halos: static and dynamic.

Ko, Chung-Ming↗
NASA NTRS2001

The Extraterrestrial Materials Simulation Laboratory

In contrast to fly-by and orbital missions, in situ missions face an incredible array of challenges in near-target navigation, landing site selection, descent, landing, science operations, sample collection and handling, drilling, anchoring, subsurface descent, communications, and contamination. The wide range of materials characteristics and environments threaten mission safety and success. For example, many physical properties are poorly characterized, including strength, composition, heterogeneity, phase change, texture, thermal properties, terrain features, atmospheric interaction, and stratigraphy. Examples of the range of materials properties include, for example: (1) Comets, with a possible compressive strength ranging from a light fluff to harder than concrete: 10(exp 2) to 10 (exp 8) Pa; (2) Europa, including a possible phase change at the surface, unknown strength and terrain roughness; and (3) Titan, with a completely unknown surface and possible liquid ocean. Additional information is contained in the original extended abstract.

Green, J. R.↗
NASA NTRS2001

Assessment and Accommodation of Thermal Expansion of the Internal Active Thermal Control System Coolant During Launch to On-Orbit Activation of International Space Station Elements

The International Space Station (ISS) employs an Internal Active Thermal Control System (IATCS) comprised of several single-phase water coolant loops. These coolant loops are distributed throughout the ISS pressurized elements. The primary element coolant loops (i.e., US Laboratory module) contain a fluid accumulator to accommodate thermal expansion of the system. Other element coolant loops are parasitic (i.e., Airlock), have no accumulator, and require an alternative approach to insure that the system Maximum Design Pressure (MDP) is not exceeded during the Launch to Activation phase. During this time the element loop is a stand alone closed individual system. The solution approach for accommodating thermal expansion was affected by interactions of system components and their particular limitations. The mathematical solution approach was challenged by the presence of certain unknown or not readily obtainable physical and thermodynamic characteristics of some system components and processes. The purpose of this paper is to provide a brief description of a few of the solutions that evolved over time, a novel mathematical solution to eliminate some of the unknowns or derive the unknowns experimentally, and the testing and methods undertaken.

Edwards, J. Darryl↗
NASA NTRS2002

Implications of Ultrahigh Energy Air Showers for Physics and Astrophysics

The primary ultrahigh energy particles which produce giant extensive air showers in the Earth atmosphere present an intriguing mystery from two points of view: (1) How are the base particles produced with such astounding energies, eight orders of magnitude higher than those produced by the best man-made terrestrial accelerators? (2) Since they are most likely extragalactic in origin, how do they reach us from extragalactic distances without suffering the severe losses expected from interactions with the 2.7 K thermal cosmic background photons, the so called GZK effect? The answers to these questions may involve new physics: violations of special relativity, grand unification theories, and quantum gravity theories involving large extra dimensions. They may involve new astrophysical sources, "zevatrons". Or some heretofore totally unknown physics or astrophysics may hold the answer. I will discuss here the mysteries involving the production and extragalactic propagation of ultrahigh energy cosmic rays and some suggested possible solutions.

Stecker, F. W.↗
NASA NTRS2002

Assessment and Accommodation of Thermal Expansion of the Internal Active Thermal Control System Coolant During Launch to On-Orbit Activation of International Space Station Elements

The International Space Station (ISS) employs an Internal Active Thermal Control System (IATCS) comprised of several single-phase water coolant loops. These coolant loops are distributed throughout the ISS pressurized elements. The primary element coolant loops (i.e. U.S. Laboratory module) contain a fluid accumulator to accomodate thermal expansion of the system. Other element coolant loops are parasitic (i.e. Airlock), have no accumulator, and require an alternative approach to insure that the system maximum design pressure (MDP) is not exceeded during the Launch to Activation (LTA) phase. During this time the element loops is a stand alone closed system. The solution approach for accomodating thermal expansion was affected by interactions of system components and their particular limitations. The mathematical solution approach was challenged by the presence of certain unknown or not readily obtainable physical and thermodynamic characteristics of some system components and processes. The purpose of this paper is to provide a brief description of a few of the solutions that evolved over time, a novel mathematical solution to eliminate some of the unknowns or derive the unknowns experimentally, and the testing and methods undertaken.

Edwards, Darryl↗
NASA NTRS2010

Three-Phased Wake Vortex Decay

A detailed parametric study is conducted that examines vortex decay within turbulent and stratified atmospheres. The study uses a large eddy simulation model to simulate the out-of-ground effect behavior of wake vortices due to their interaction with atmospheric turbulence and thermal stratification. This paper presents results from a parametric investigation and suggests improvements for existing fast-time wake prediction models. This paper also describes a three-phased decay for wake vortices. The third phase is characterized by a relatively slow rate of circulation decay, and is associated with the ringvortex stage that occurs following vortex linking. The three-phased decay is most prevalent for wakes imbedded within environments having low-turbulence and near-neutral stratification.

Proctor, Fred H.↗