SEARCH · Search NASA

Results for “unique factorization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Temperature Coefficients of Perovskite Photovoltaics for Energy Yield Calculations

Temperature coefficients for maximum power (TPCE), open circuit voltage (VOC), and short circuit current (JSC) are standard specifications included in data sheets for any commercially available photovoltaic module. To date, there has been little work on determining the TPCE for perovskite photovoltaics (PV). We fabricate perovskite solar cells with a TPCE of -0.08 rel %/°C and then disentangle the temperature-dependent effects of the perovskite absorber, contact layers, and interfaces by comparing different device architectures and using drift-diffusion modeling. A main factor contributing to the small TPCE of perovskites is their low intrinsic carrier concentrations with respect to Si and GaAs, which can be explained by its wider band gap. In this work, we demonstrate that the unique increase in Eg with increasing temperatures seen for perovskites results in a reduction in JSC but positively influences VOC. The current limiting factors for the TPCE in perovskite PV are identified to originate from interfacial effects.

14 SOLAR ENERGY↗

DOE OSTI2023

Extending the low-recycling, flat temperature profile regime in the lithium tokamak experiment-β (LTX-β) with ohmic and neutral beam heating

Abstract Recent experiments in the lithium tokamak experiment- β (LTX- β ) have extended the duration, performance, operating conditions, and diagnosis of the flat-temperature profile, low-recycling regime first observed in LTX. As expected, Li retains hydrogen and suppresses edge neutral cooling, allowing increased edge electron temperature, roughly equal to the core T e . Flat temperature profiles had been obtained transiently in LTX, as the plasma density decayed following the cessation of edge gas puffing. Careful control over the fueling in LTX- β has now been shown to sustain the flat T e profile and hot edge unique to the low-recycling regime for multiple confinement times in high performance discharges with decaying or steady density. With low density, the flat T e profile is also seen to extend into the scrape-off layer. Neutral beam heating is observed in target discharges with relatively flat electron temperature profiles ( T edge ∼ T core /2), though beam heating is stronger in discharges with higher fueling, higher density, and depressed edge T e . Beam heating produces additional peaking of the T e profile, without degradation of the energy confinement time. Neutral beam heating of target discharges with relatively flat electron temperature profiles similarly results in broad beam heated temperature profiles. Energy confinement in LTX- β generally compares favorably to ohmic and H-mode scalings, frequently exceeding them by factors of 2–4. New and improved diagnostics in LTX- β enable better characterization of this unique regime, including measurements of ion temperature and high field side Thomson scattering profiles. As an initial step toward characterizing turbulence with no T e gradient and roughly equal density and pressure gradient, core fluctuation spectra have been measured in peaked T e discharges using far-forward scattering and fluctuation reflectometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1983

Human factors in Spacelab - Crew training

At NASA-Ames Research Center's Life Sciences Flight Experiments Project Office two payloads for the Shuttle Spacelab are currently in development. The first payload, Spacelab-3, will launch in November 1984. Unique life sciences hardware designed to support animals in 0-g will fly for the first time. Flight crew training sessions for the Spacelab-3 astronauts began in June 1982. Human factors involvement is extensive. A thorough understanding of both the 1-g and 0-g environments is necessary. The weightlessness of the space environment creates special conditions; e.g., the time required for a 1-g laboratory experiment significantly increases in 0-g. The transportation of objects in 0-g uses different techniques than on earth. These considerations, plus others, are incorporated into the design of the Spacelab-3 crew training program.

Junge, M. K.↗

NASA NTRS1996

Promoter-dependent and -independent activation of insulin-like growth factor binding protein-5 gene expression by prostaglandin E2 in primary rat osteoblasts

Insulin-like growth factor (IGF) action is mediated by high affinity cell surface IGF receptors and modulated by a family of secreted IGF binding proteins (IGFBPs). IGFBP-5, the most conserved of six IGFBPs characterized to date, uniquely potentiates the anabolic actions of IGF-I for skeletal cells. In osteoblasts, IGFBP-5 production is stimulated by prostaglandin E2 (PGE2), a local factor that mediates certain effects induced by parathyroid hormone, cytokines such as interleukin-1 and transforming growth factor-beta, and mechanical strain. In this study, we show that transcriptional and post-transcriptional events initiated by PGE2 collaborate to enhance IGFBP-5 gene expression in primary fetal rat osteoblast cultures. PGE2 treatment stimulated up to a 7-fold rise in steady-state levels of IGFBP-5 mRNA throughout 32 h of incubation. Analysis of nascent IGFBP-5 mRNA suggested that PGE2 had only a modest stimulatory effect on IGFBP-5 gene transcription, and transient transfection studies with IGFBP-5 promoter-reporter genes confirmed that PGE2 enhanced promoter activity by approximately 2-fold. Similar stimulatory effects were seen with forskolin. A DNA fragment with only 51 base pairs of the 5'-flanking sequence retained hormonal responsiveness, which may be mediated by a binding site for transcription factor AP-2 located at positions -44 to -36 in the proximal IGFBP-5 promoter. Incubation of osteoblasts with the mRNA transcriptional inhibitor 5,6-dichloro-1-beta-D-ribofuranosylbenzimidazole demonstrated that PGE2 enhanced IGFBP-5 mRNA stability by 2-fold, increasing the t1/2 from 9 to 18 h. The effects of PGE2 on steady-state IGFBP-5 transcripts were abrogated by preincubating cells with cycloheximide, indicating that the effects of PGE2 on both gene transcription and mRNA stability required ongoing protein synthesis. Therefore, both promoter-dependent and -independent pathways converge to enhance IGFBP-5 gene expression in response to PGE2 in osteoblasts.

Non-NASA Center↗

DOE OSTI2022

NF-κB perturbation reveals unique immunomodulatory functions in Prx1 + fibroblasts that promote development of atopic dermatitis

Skin is composed of diverse cell populations that cooperatively maintain homeostasis. Up-regulation of the nuclear factor κB (NF-κB) pathway may lead to the development of chronic inflammatory disorders of the skin, but its role during the early events remains unclear. Here, through analysis of single-cell RNA sequencing data via iterative random forest leave one out prediction, an explainable artificial intelligence method, we identified an immunoregulatory role for a unique paired related homeobox-1 (Prx1) + fibroblast subpopulation. Disruption of Ikkb–NF-κB under homeostatic conditions in these fibroblasts paradoxically induced skin inflammation due to the overexpression of C-C motif chemokine ligand 11 (CCL11; or eotaxin-1) characterized by eosinophil infiltration and a subsequent T H 2 immune response. Because the inflammatory phenotype resembled that seen in human atopic dermatitis (AD), we examined human AD skin samples and found that human AD fibroblasts also overexpressed CCL11 and that perturbation of Ikkb–NF-κB in primary human dermal fibroblasts up-regulated CCL11. Monoclonal antibody treatment against CCL11 was effective in reducing the eosinophilia and T H 2 inflammation in a mouse model. Together, the murine model and human AD specimens point to dysregulated Prx1 + fibroblasts as a previously unrecognized etiologic factor that may contribute to the pathogenesis of AD and suggest that targeting CCL11 may be a way to treat AD-like skin lesions.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2024

Determination of Pion and Kaon Structure Using the Sullivan Process at Moderate to large Fractional Momentum

Significant progress has been made in describing the structure of hadrons in terms of Quantum ChromoDynamics (QCD) degrees of freedom. The recently developed framework of Generalized Parton Distribtions (GPDs) may provide the path towards three-dimensional imaging of the hadronic structure. Integrating the GPDs over the fractional momentum (x), the form factors are obtained which are integrally related to understanding the emergent hadron mass-generating mechanism (EHM) embedded in QCD and the mass-scale that characterizes the proton [Roberts (2016)]. The Sullivan process, in which one scatters electrons off the proton?s virtual meson cloud and thus creates a meson target, is used to probe this structure. Studies of kaon electroproduction offer unique opportunities in this. The last two decades saw a dramatic improvement in the precision of charged meson form factor data, and new results have become available on the transition form factor. The KaonLT experiment (E12-09-011) carried out in Hall C at Jefferson Lab (Jlab) was designed to measure longitudinal/transverse (L/T) separated kaon cross sections required to access form factors and GPDs [Bosted et al. (2008)]. KaonLT aimed to confirm the exclusive kaon electroproduction mechanism, which is essential for determining the kaon form factor and investigating GPDs. The results obtained from this experiment have provided the highest Q2 for L-T separated kaon electroproduction cross section, and it is the first time that a separated kaon cross-section measurement has been carried out above W = 2:2GeV.

Trotta, Richard↗

DOE OSTI2023

Habitat severity characteristics structure soil communities at regional and local spatial scales along the Antarctica Peninsula

Antarctic soils provide an excellent setting to test biogeographical patterns across spatial and environmental scales given their relatively simple communities and the dominance of physical factors that create strong environmental gradients. Additional urgency is given by the fact that their unique terrestrial communities are the subject of conservation efforts in a rapidly changing environment. We investigated relationships of soil community assembly and alpha and beta diversity with climatic and environmental parameters across regional and local scales in Maritime Antarctica. We sampled from a regional gradient of sites that differ in habitat severity, ranging from relatively favourable to harsher physicochemical conditions. At the regional scale, bacterial community characteristics and microarthropod abundance varied along this severity gradient, but most measures of fungal communities did not. Microarthropod and microbial communities differed in which soil and climate parameters were most influential, and the specific parameters that influenced each taxon differed across broad and fine spatial scales. This suggests that conservation efforts will need to focus on a large variety of habitat characteristics to successfully encompass diversity across taxa. Because beta diversity was the result of species turnover, conservation efforts also cannot focus on only the most biodiverse sites to effectively preserve all aspects of biodiversity.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Critical Role of the Interfacial Layer in Associating Polymers with Microphase Separation

Polymers with dynamic (transient) bonds, often called associating polymers, have been attracting significant attention in recent years due to their unique viscoelastic properties, self-healing ability, and recyclability. Nevertheless, understanding the mechanisms and the factors controlling their macroscopic properties remains limited due to the higher complexity introduced by the dynamic bonds. Here in this study, small-angle X-ray scattering (SAXS), broadband dielectric spectroscopy (BDS), and rheology were applied to unravel the structure and dynamics of telechelic associating polymers with different molecular weights. SAXS measurements revealed phase separation of the functional end groups with an average cluster size of ~2–3 nm and the distance between clusters controlled by the chain length. Borrowing the interfacial layer model analysis of BDS data from the polymer nanocomposite field, we demonstrated the presence of an interfacial polymer layer with a thickness of ~0.7–0.9 nm surrounding these clusters. Rheological measurements showed quantitatively that the presence of the interfacial layer significantly alters the viscoelastic behavior of these materials, indicating the crucial role of the interfacial layer in defining the macroscopic mechanical properties of the studied telechelic materials. The presented results emphasize that phase separation of the functional groups in associating polymers leads to very significant changes of the viscoelastic properties, opening a promising avenue in the design of novel functional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Neutrino Scattering Measurements on Hydrogen and Deuterium: A Snowmass White Paper

Neutrino interaction uncertainties are a limiting factor in current and next-generation experiments probing the fundamental physics of neutrinos, a unique window on physics beyond the Standard Model. Neutrino-nucleon scattering amplitudes are an important part of the neutrino interaction program. However, since all modern neutrino detectors are composed primarily of heavy nuclei, knowledge of elementary neutrino-nucleon amplitudes relies heavily on experiments performed in the 1970s and 1980s, whose statistical and systematic precision are insufficient for current needs. In this white paper, we outline the motivation for attempting measurements on hydrogen and deuterium that would improve this knowledge, and we discuss options for making these measurements either with the DUNE near detector or with a dedicated facility.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS1978

Analysis and Experimental Tests of a High-Performance Evacuated Tubular Collector

A high-performance collector based on the use of all-glass, evacuated tubular collector elements is described and analyzed, and supporting experimental data presented. The collector operated with excellent efficiency at temperatures high enough to drive existing air conditioning units, and showed good performance under diffuse light and low insolation conditions. Collector efficiency was insensitive to operating temperature, ambient temperature, and wind speed. In addition, air, as well as liquid, can be used as the heat transfer fluid, with no significant performance penalty. While the equations governing the useful energy produced can be cast in a form similar to that for flat plate collectors, several important parameters were unique in a number of respects. The loss coefficient was unusually low, while the flow factor and effective insolation were unusually high.

Beekley, D. C.↗

NASA NTRS1981

Active thermal control for an advanced power platform

Effective use of the Shuttle Orbiter during the operational phase will require the provision of electrical power from free-flying power platforms which will interface with the Orbiter. Such platforms present unique requirements for active thermal control based upon the long life and high heat load requirements which will be necessary to provide 25 kW or more of electricity to the Orbiter and payloads. This paper will present key issues in the design of these active thermal control systems (ATCS) and will discuss potential solutions intended to ensure maximum effectiveness of advanced power platforms. Such issues include proper selection of coolant fluid for the power platform and payload loops; selection and development of thermal control surfaces for five-year life; the use of off-the-shelf hardware vs development of unique hardware, central vs decentralized control of the ATCS; system life and reliability as a factor in determining redundancy and the possibility of on-orbit EVA maintenance; and the interfaces between the power platform and the Orbiter and payloads.

Owen, J. W.↗

NASA NTRS1992

An analysis of human performance in simulated partial-gravity environments

Three unique partial gravity test environments; parabolic flight, water immersion and a mechanical-relief device provide the environment to evaluate human locomotion, reach sweeps, and posture in the reduced gravity levels of the moon (1/6) and Mars (3/8). The development of a motion analysis database for 1/6 and 3/8 gravity environments as well as an initial understanding of human motion in low gravity environments are the focus of these experiments. Each of the three partial-gravity simulations provided a unique environment with some specific limitations. Water immersion provides a continuous testing environment but must factor in the effects of water viscosity drag, subject weighting, and breathing apparatus. Parabolic flight provides the most realistic testing environment although the test must be interrupted every 40 seconds to execute a complete parabolic maneuver of the aircraft. Mechanical force relief systems also provide uninterrupted testing. However, the body support harness necessary for use of mechanical force relief systems can potentially hinder test subject movement. By using the test results generated from all three test arenas, the Man-Systems Division will create a database of human locomotion specific to the lunar and Mars gravity environments. The information gathered is being used to enhance the development and design of future human habitation elements.

Moore, Nathan R.↗

NASA NTRS1993

Mg II and Ly-alpha fluxes in M dwarfs - Evaluation of an acoustic model

Surface fluxes of Mg II and Ly-alpha from a sample of M dwarfs have been reported by Panagi and Mathioudakis (PM, 1992). In order to determine if acoustic effects can reproduce the fluxes in the least active ('basal') stars in the PM sample, we have constructed steady state models of plane-parallel atmospheres with T(eff) = 3000 and 4000 K including heating by shock dissipation. The models incorporate radiative losses in the chromosphere by solving the transfer equation for two strong lines (Mg II k and Ly-alpha). Predictions of standard weak shock theory are expected to overestimate the rate of energy deposition in the chromospheres of M dwarfs compared to the rate of deposition in F, G, or K dwarfs. In order to incorporate this effect in M dwarfs, we compute a series of atmospheric models in which, for a given T(eff), the standard weak shock dissipation rate is reduced by a series of factors F(r). Although the input acoustic flux F(mech) may in principle be determined uniquely by T(eff) and log g, the correct value to use in any particular case is not well known. We therefore use F(mech) and F(r) as parameters to construct a family of M dwarf models at various T(eff) and g. Comparing with the observed fluxes in the least active M dwarfs of the PM sample, we find that our models reproduce the observed fluxes of both Mg II and Ly-alpha best if F(mech) is close to the value predicted by Bohn (1984) and if F(r) is approximately equal to 10-20.

Mullan, D. J.↗

NASA NTRS2017

Perspectives from the Wearable Electronics and Applications Research (WEAR) Lab, NASA Johnson Space Center

As NASA moves beyond exploring low earth orbit and into deep space exploration, increased communication delays between astronauts and earth drive a need for crew to become more autonomous (earth-independent). Currently crew on board the International Space Station (ISS) have limited insight into specific vehicle system performance because of the dependency on monitoring and real-time communication with Mission Control. Wearable technology provides a method to bridge the gap between the human (astronaut) and the system (spacecraft) by providing mutual monitoring between the two. For example, vehicle or environmental information can be delivered to astronauts through on-body devices and in return wearables provide data to the spacecraft regarding crew health, location, etc. The Wearable Electronics and Applications Research (WEAR) Lab at the NASA Johnson Space Center utilizes a collaborative approach between engineering and human factors to investigate the use of wearables for spaceflight. Zero and partial gravity environments present unique challenges to wearables that require collaborative, user-centered, and iterative approaches to the problems. Examples of the WEAR Lab's recent wearable projects for spaceflight will be discussed.

Moses, Haifa R.↗

NASA NTRS2017

Perspectives from the Wearable Electronics and Applications Research (WEAR) Lab, NASA, Johnson Space Center

Moses, Haifa R.↗

NASA NTRS2024

Investigating Hydrothermally Altered Basalts in Long Valley, California: Potential Analog for Altered Basalts on Mars

The Long Valley Caldera in California is a well-studied geological site, but its potential as a Mars analog is relatively unexplored. The caldera shows evidence of hydrothermal activity and alteration of basalt units, but prior research has not focused on this. Understanding alteration trends and geochemical signatures in basalt could prove useful in our understanding of Martian geology. Research on Mars has shown alteration trends, but the exact mechanisms behind these, such as the influence of water, heat, and other environmental factors, remain enigmatic. We identified a single basalt flow in Long Valley Caldera, California, that uniquely houses both fumarolic and hydrothermal alteration regimes. By sampling throughout the basalt unit (Fig. 1), we aim to characterize the connections between types, degrees, and durations alteration mechanisms, along with the resultant mineral phases and textures, to better understand rover and orbital data of Mars basalts.

Mars↗

DOE OSTI2022

Neutrino Scattering Measurements on Hydrogen and Deuterium: A Snowmass White Paper

Alvarez-Ruso, Luis↗

NASA NTRS1983

Dynamics of directional reflectance factor distributions for vegetation canopies

Directional reflectance factors that span the entire exitance hemisphere are collected on the ground for a variety of homogeneous vegetation canopies and bare soils. NOAA 6/7 AVHRR bands 1 (0.58-0.68 micron) and 2 (0.73-1.1 microns) are used. When possible, geometric measurements of leaf orientation distributions are taken simultaneously with each spectral measurement. Other supporting structural and optical measurements are made. These data sets are taken at various times of the day for each cover type. These unique sets, together with pertinent data in the literature, are used to investigate the dynamics of the directional reflectance factor distribution as a function of the geometric structure of the scene, solar zenith angle, and optical properties of the scene components (leaves and soil). For complete homogeneous vegetation canopies, the principal trend observed at all sun angles and spectral bands is a minimum reflectance near nadir and increasing reflectance with increasing off-nadir view angle for all azimuth directions.

Kimes, D. S.↗