Search NASA⌕ Search

SEARCH · Search NASA

Results for “wave speed”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

Experimental Results of Performance Tests on a Four-Port Wave Rotor

A series of tests has been performed on a four-port wave rotor suitable for use as a topping stage on a gas turbine engine, to measure the overall pressure ratio obtainable as a function of temperature ratio, inlet mass flow, loop flow ratio, and rotor speed. The wave rotor employed an open high pressure loop that is the high pressure inlet flow was not the air exhausted from the high pressure outlet, but was obtained from a separate heated source, although the mass flow rates of the two flows were balanced. This permitted the choice of a range of loop-flow ratios (i.e., ratio of high pressure flow to low pressure flow), as well as the possibility of examining the effect of mass flow imbalance. Imbalance could occur as a result of leakage or deliberate bleeding for cooling air. Measurements of the pressure drop in the high pressure loop were also obtained. A pressure ratio of 1.17 was obtained at a temperature ratio of 2.0, with an inlet mass flow of 0.6 lb/s. Earlier tests had given a pressure ratio of less than 1.12. The improvement was due to improved sealing between the high pressure and low pressure loops, and a modification to the movable end-wall which is provided to allow for rotor expansion.

Wilson, John↗
NASA NTRS1970

Dispersion discontinuities of strong collisionless shocks

Linear fluid equations are used to estimate wave train properties of strong collisionless shocks. Fast shocks exhibit several dispersion changes with increasing Mach number. For perpendicular propagation into a finite-beta plasma, an ion cyclotron radius trailing wave train exists only for (M sub F)2 is smaller than 2. Oblique fast shocks have a leading ion inertia wave train if M sub A is smaller than root of M(+)/M(-) cos theta/2 and a trailing electron inertia train if M sub A is greater than root of M(+)/M(-) cos theta/2. If the downstream sound speed exceeds the flow speed, linear wave theory predicts a trailing ion acoustic structure which probably resides within the magnetic shock. For a turbulent shock model in which an effective electron-ion collision frequency exceeds the lower hybrid frequency, ions decouple from the magnetic field; the shock wave train now trails with electron inertia and electron gyroradius lengths. Comparisons of this turbulent model and observations on the earth's bow shock are made.

Coroniti, F. V.↗
NASA NTRS2017

North American Drought and Links to Northern Eurasia: The Role of Stationary Rossby Waves

This chapter provides an overview of the role of stationary Rossby waves in the sub-seasonal development of warm season drought over North America and subsequent downstream development of climate anomalies over northern Eurasia. The results are based on a case study of a stationary Rossby wave event that developed during 20 May 15 June 1988. Simulations with the NASA Goddard Earth Observing System (GEOS-5) atmospheric general circulation model highlight the importance of the mean jet streams in guiding and constraining the path and speed of wave energy propagation. In particular, convective anomalies that developed over the western Pacific in late May (in the presence of the strong North Pacific jet) produce a predilection for persistent upper-level high anomalies over central North America about ten days later, leading to the rapid development of severe dry conditions there. There are indications of continued downstream wave energy propagation that reaches northern Eurasia about two weeks later, leading to the development of dry conditions over eastern Europe and western Russia, and cool and wet conditions over western Europe and central northern Eurasia. The results suggest that stationary Rossby waves can serve as a source of predictability for sub-seasonal development of droughts over North America and northern Eurasia.

GEOS-5↗
NASA NTRS1996

The Kirchhoff Formula for a Supersonically Moving Surface

The Kirchhoff formula for radiation from stationary surfaces first appeared in 1882, and it has since found many applications in wave propagation theory. In 1930, Morgans extended the formula to apply to surfaces moving at speeds below the wave propagation speed; we refer to Morgans formula as the subsonic formulation. A modern derivation of Morgans result was published by Farassat and Myers in 1988, and it has now been used extensively in acoustics, particularly for high speed helicopter rotor noise prediction. Under some common conditions in this application, however, the appropriate Kirchhoff surface must be chosen such that portions of it travel at supersonic speed. The available Kirchhoff formula for moving surfaces is not suitable for this situation. In the current paper we derive the Kirchhoff formula applicable to a supersonically moving surface using some results from generalized function theory. The new formula requires knowledge of the same surface data as in the subsonic case. Complications that arise from apparent singularities in the new formulation are discussed briefly in the paper.

Farassat, F.↗
NASA NTRS1983

Southern ocean mean monthly waves and surface winds for winter 1978 by Seasat radar altimeter

Data acquired by the SEASAT radar altimeter during the 3 month satellite lifetime are analyzed in a study of the sea state of the southern hemisphere oceans. The lifetime of the SEASAT satellite, July 7 to October 10, 1978, corresponds to the Antarctic winter. Mean monthly maps of wind speed, significant wave height, and swell have been generated from the altimeter measurements along the satellite tracks. These maps delineate spatial and temporal differences of these parameters in the Atlantic, Indian, and Pacific oceans. Several features of the Southern Ocean wind and wave fields agree with conventional descriptions. For example, the principle zonal wind regimes established by the Southeast Trades and Westerlies are clearly evident in the monthly averages. Significant wave height and swell also exhibit minima near the Doldrums at low latitudes with steady increases southward to the latitudes of the Westerlies. However, superimposed on these general patterns is significant variability with horizontal scales as small as 1000 km. The maps also document a gradual migration of the region of absolute maximum wind and wave from the Atlantic eastward to the Indian Ocean and finally into the Pacific.

Mognard, N. M.↗
NASA NTRS2016

Experimental Investigation on Acousto-ultrasonic Sensing Using Polarization-Maintaining Fiber Bragg Gratings

This report discusses the guided Lamb wave sensing using polarization-maintaining (PM) fiber Bragg grating (PM-FBG) sensor. The goal is to apply the PM-FBG sensor system to composite structural health monitoring (SHM) applications in order to realize directivity and multi-axis strain sensing capabilities while reducing the number of sensors. Comprehensive experiments were conducted to evaluate the performance of the PM-FBG sensor attached to a composite panel structure under different actuation frequencies and locations. Three Macro-Fiber-Composite (MFC) piezoelectric actuators were used to generate guided Lamb waves that were oriented at 0, 45, and 90 degrees with respect to PM-FBG axial direction, respectively. The actuation frequency was varied from 20kHz to 200kHz. It was shown that the PM-FBG sensor system was able to detect high-speed ultrasound waves and capture the characteristics under different actuation conditions. Both longitudinal and lateral strain components in the order of nano-strain were determined based on the reflective intensity measurement data from fast and slow axis of the PM fiber. It must be emphasized that this is the first attempt to investigate acouto-ultrasonic sensing using PM-FBG sensor. This could lead to a new sensing approach in the SHM applications. Nomenclature.

Wang, Gag↗
NASA NTRS2015

Experimental Investigation on Acousto-Ultrasonic Sensing Using Polarization-Maintaining Fiber Bragg Gratings

This report discusses the guided Lamb wave sensing using polarization-maintaining (PM) fiber Bragg grating (PM-FBG) sensor. The goal is to apply the PM-FBG sensor system to composite structural health monitoring (SHM) applications in order to realize directivity and multi-axis strain sensing capabilities while using reduced number of sensors. Comprehensive experiments were conducted to evaluate the performance of the PM-FBG sensor in a composite panel structure under different actuation frequencies and locations. Three Macro-Fiber-Composite (MFC) piezoelectric actuators were used to generate guided Lamb waves and they are oriented at 0, 45, and 90 degrees with respect to PM-FBG axial direction, respectively. The actuation frequency was varied from 20kHz to 200kHz. It is shown that the PM-FBG sensor system is able to detect high-speed ultrasound waves and capture the characteristics under different actuation conditions. Both longitudinal and lateral strain components in the order of nano-strain were determined based on the reflective intensity measurement data from fast and slow axis of the PM fiber. It must be emphasized that this is the first attempt to investigate acousto-ultrasonic sensing using PM-FBG sensor. This could lead to a new sensing approach in the SHM applications.

Wang, Gang↗
NASA NTRS1994

The sea state bias in altimeter estimates of sea level from collinear analysis of TOPEX data

The wind speed and significant wave height (H(sub 1/3)) dependencies of the sea state bias in altimeter estimates of sea level, expressed in the form (Delta)h(sub SSB) = bH(sub 1/3), are examined from least squares analysis of 21 cycles of collinear TOPEX data. The bias coefficient b is found to increase in magnitude with increasing wind speed up to about 12 m/s and decrease monotonically in magnitude with increasing H(sub 1/3). A parameterization of b as a quadratic function of wind speed only, as in the formation used to produce the TOPEX geophysical data records (GDRs), is significantly better than a parameterization purely in terms of H(sub 1/3). However, a four-parameter combined wind speed and wave height formulation for b (quadratic in wind speed plus linear in H(sub 1/3)) significantly improves the accuracy of the sea state bias correction. The GDR formulation in terms of wind speed only should therefore be expanded to account for a wave height dependence of b. An attempt to quantify the accuracy of the sea state bias correction (Delta)h(sub SSB) concludes that the uncertainty is a disconcertingly large 1% of H(sub 1/3).

Chelton, Dudley B.↗
NASA NTRS1975

Gravity shear waves atop the cirrus layer of intense convective storms

Recent visual satellite photographs of certain intense convective storms have revealed concentric wave patterns. A model for the generation and growth of these waves is proposed. The proposed initial generating mechanism is similar to the effect noticed when a pebble is dropped into a calm pond. The penetration of the tropopause by overshooting convection is analogous to the pebble's penetration of the water's surface. The model for wave growth involves instability due to the wind shear resulting from the cirrus outflow. This model is based on an equation for the waves' phase speed which is similar to the Helmholtz equation. It, however, does not assume an incompressible atmosphere, but rather assumes density is a logarithmic function of height. Finally, the model is evaluated on the two mid-latitude and three tropical cases. The data indicate that shearing instability may be a significant factor in the appearance of these waves.

Stobie, J. G.↗
NASA NTRS1988

Wave drag and high-speed performance of supersonic STOVL fighter configurations

A supersonic STOVL fighter aircraft aerodynamic research program is being conducted at NASA Ames Research Center. The research focuses on technology development for this type of aircraft and includes generating an extensive aerodynamic database and resolving particular aerodynamic uncertainties for various twin- and single-engine aircraft concepts. Highlights of the results from this program are presented. The highlights include propulsion-induced effects on the aircraft drag, prediction capabilities, volume integration for minimizing drag, and wave drag and aerodynamic efficiency comparisons. Results indicate that estimated STOVL fighter performance is roughly comparable to the performance of modern conventional fighters in terms of wave drag and aerodynamic efficiency.

Durston, Donald A.↗
NASA NTRS1988

Wave Drag and High-speed Performance of Supersonic STOVL Fighter Configuration

A supersonic STOVL fighter aircraft aerodynamic research program is under way at NASA Ames Research Center. The research focuses on technology development for this type of aircraft and includes generating an extensive aerodynamic database and resolving particular aerodynamic uncertainties for various twin- and single-engine aircraft concepts. Highlights of the results from this program are presented. The highlights include propulsion-induced effects on the aircraft drag, prediction capabilities, volume integration for minimizing drag, and wave drag and aerodynamic efficiency comparisons. Results indicate that estimated STOVL fighter performance is roughly comparable to the performance of modern conventional fighters in terms of wave drag and aerodynamic efficiency.

Durston, Donald A.↗
NASA NTRS2009

Detection of Rossby Waves in Multi-Parameters in Multi-Mission Satellite Observations and HYCOM Simulations in the Indian Ocean

Rossby waves are difficult to detect with in situ methods. However, as we show in this paper, they can be clearly identified in multi-parameters in multi-mission satellite observations of sea surface height (SSH), sea surface temperature (SST) and ocean color observations of chlorophyll-a (chl-a), as well as 1/12-deg global HYbrid Coordinate Ocean Model (HYCOM) simulations of SSH, SST and sea surface salinity (SSS) in the Indian Ocean. While the surface structure of Rossby waves can be elucidated from comparisons of the signal in different sea surface parameters, models are needed to gain direct information about how these waves affect the ocean at depth. The first three baroclinic modes of the Rossby waves are inferred from the Fast Fourier Transform (FFT), and two-dimensional Radon Transform (2D RT). At many latitudes the first and second baroclinic mode Rossby wave phase speeds from satellite observations and model parameters are identified.

SSH (SEA SURFACE HEIGHT)↗
DOE OSTI2024

Shock Response of Polymethyl Methacrylate (PMMA) Under Explosive Loading

Abstract The dynamic response of polymethyl methacrylate (PMMA) is well understood for one-dimensional planar impact shocks, but limited research has been performed on the response of PMMA under spherical shock loading. In this work, the shock decay of an explosively-driven shock wave into PMMA was experimentally measured. PMMA cubes of various geometries were explosively loaded with an RP-80 detonator to produce the explosive shock wave. High-speed schlieren imaging was implemented to measure the explosively-driven shock wave velocity throughout the PMMA cubes. Photon Doppler velocimetry (PDV) was used to measure the particle velocity imparted by the shock wave at the surface of the cubes. The material shock response was studied at distances from 21.91 to 133.3 mm from the explosive source. The particle velocity history measured by PDV was compared to the wave profile visualized in the high-speed images. The shock wave pulse amplitude decreased with increased distance from the source. The conducted experiments extend the PMMA shock Hugoniot relating to the lower shock and particle velocity regime.

Torres, S. M. (ORCID:0009000287177206)↗
NASA NTRS1993

Global-scale waves in the Venus atmosphere

The nature of global-scale waves that can exist in the atmosphere of Venus is examined. A linear three-dimensional model atmosphere with spherical geometry is used to study large-scale forced and free waves. Solutions are obtained numerically with grid points in the vertical and a spherical harmonic expansion in the horizontal. Observations have shown a global-scale traveling wave with phase speed near the cloud-top wind velocity. Global-scale wave modes are found to exist in the model at this velocity. When a radiative-dynamic cloud feedback is added to the model, the most unstable wave mode is found to have the same phase speed as the observed wave. The horizontal structure of this wave is consistent with the observed horizontal structure of the 'Y' feature seen in ultraviolet images of the Venus cloud top.

Smith, Michael D.↗
NASA NTRS1985

Observations of the polar regions from satellites using active and passive microwave techniques

Observations of the ocean ice, ice sheets, ice edges, and ocean waves in the Antarctic, performed by the Seasat and Nimbus-7 satellites are described. Specific features of the Seasat altimeter, the SAR, the Seasat-A Scatterometer System, and the Scanning Multichannel Microwave Radiometer (SMMR) are discussed, together with the advantages and limitations of each instrument as applied to the study of ice dynamics. The Nimbus-7 SMMR algorithm for calculating sea-ice concentrations is presented. In addition, the Seasat altimeter-derived data on wind speed and wave heights in the Southern Ocean, and on the ice sheets of the Antarctica and Greenland were evaluated.

Swift, C. T.↗
DOE OSTI2024

Vortex bursting and associated twist dynamics on helical vortex tubes and vortex rings

The interaction of opposite-signed twist waves on vortex tubes can lead to vortex bursting, a process where the core expands into a double ring-like structure with strong swirling flows. Previous works have studied vortex bursting on rectilinear vortices by axially perturbing the initial core size to generate the twist waves, and observed largely axisymmetric bursting dynamics. In this work, we numerically study bursting on vortical structures with curved centrelines, analysing the interaction between the centreline dynamics, twist wave generation and propagation, and vortex bursting. We focus on axially perturbed helical vortex tubes with small radius-to-pitch ratios up to$0.0625$, as well as vortex rings with a large radius-to-core size ratio$10$, both at a circulation-based Reynolds number$5000$. The results show that though the initial twist wave propagation speeds are relatively unaffected by the curvature and torsion of the centreline, the bursting process is altered significantly compared with rectilinear vortices. The self-induced rotation of the centreline of the helical tube induces a non-axisymmetric distortion of the bursting structure, which rapidly breaks up the vortex core into small-scale helical structures. A similar destabilization of the bursting structure also occurs on vortex rings. The enstrophy increase and accelerated energy decay associated with bursting are predominantly determined by the twist wave strength, rather than the curvature and torsion of the centreline. Combined, our findings imply that bursting could play an important role in transferring and dissipating energy of vortical structures in wakes, and turbulent flows in general.

Mechanics↗