Search NASA⌕ Search

SEARCH · Search NASA

Results for “wave speed”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

A laboratory investigation of electromagnetic bias in sea level measurements by microwave altimeters

To contribute to a better understanding of the electromagnetic bias in radar altimetry, a series of experiments was conducted using a focused beam radar set at 13.5-GHz frequency. For pure wind wave fields, the authors found the bias to be a quadratic function of each of the commonly used parameters, namely, the significant wave height, the wind speed, the water elevation skewness, and significant slope. The bias divided by the significant wave height is a linear function of these parameters. The coefficients in bias representation as a function of either the significant wave height or the wind speed are significantly different from values obtained in field experiments. This led to the conclusion that none of the latter parameters can be taken solely to account for all observed bias variations. Instead, dimensionless parameters such as the wave skewness or a dimensionless wave height are shown to be more appropriate.

Branger, H.↗

A study of over-reflection in viscous Poiseuille flow

It is shown that viscous Poiseuille flow sustains wave propagation in its center region for waves whose phase speed is less than the maximum flow speed. When, moreover, there are critical levels, there exists a range of phase speeds for which over-reflection occurs, and this range corresponds exactly to the range for which unstable eigenmodes exist. Consistent with the conjecture of Lindzen and Barker (1985), it is found that viscous boundary layers around the critical level and at the wall replace the exponential regions and wave sinks required for inviscid over-reflection. It is found that over-relection is confined to phase speeds for which these two boundary layers are in close proximity, rather than widely separated or substantially overlapping. Over-reflection is inevitably associated with a wave phase tilt opposite in direction to the shear at the critical level. All other cases yield a phase tilt in the direction of the shear. The former is consistent with the condition for the Orr (1977) mechanism to produce amplification (Boyd 1983).

Lindzen, R. S.↗

Transistorized PWM inverter-induction motor drive system

This paper describes the development of a transistorized PWM inverter-induction motor traction drive system. A vehicle performance analysis was performed to establish the vehicle tractive effort-speed requirements. These requirements were then converted into a set of inverter and motor specifications. The inverter was a transistorized three-phase bridge using General Electric power Darlington transistors. The description of the design and development of this inverter is the principal object of this paper. The high-speed induction motor is a design which is optimized for use with an inverter power source. The primary feedback control is a torque angle control with voltage and torque outer loop controls. A current-controlled PWM technique is used to control the motor voltage. The drive has a constant torque output with PWM operation to base motor speed and a constant horsepower output with square wave operation to maximum speed. The drive system was dynamometer tested and the results are presented.

Peak, S. C.↗

An experimental and numerical investigation of shock wave induced turbulent boundary layer separation at hypersonic speeds

A thoroughly documented experiment is reported that was specifically designed to test and guide computations of the interaction of an impinging shock wave with a turbulent boundary layer. Detailed mean flow field and surface data are presented for two shock strengths which resulted in attached and separated flows, respectively. Numerical computations are used to illustrate the dependence of the computations on the particulars of the turbulence models. Models appropriate for zero pressure gradient flows predicted the overall features of the flow fields, but were deficient in predicting many of the details of the interaction regions. Improvements to the turbulence model parameters were sought through a combination of detailed data analysis and computer simulations which tested the sensitivity of the solutions to model parameter changes. Computer simulations using these improvements are presented and discussed.

Marvin, J. G.↗

An investigation of resonant waves in a numerical model of an observed sudden stratospheric warming

A global quasi-linear time-dependent model that is able to represent the interaction of a single planetary Rossby wave with the zonal flow is used to investigate several questions concerning the role of resonance in the major stratospheric warming of February 1979. Special attention is given to the examination of the degree of dependence of the warming development on the phase speed of the wave and the initial mean flow. The results indicate that the preconditioning occurred early in the month, just after the minor sudden warming around February 5-7, and that a fairly broad range of eastward traveling phase speeds was capable of generating a warming. The model sensitivity tests indicate that the warming simulation has a weak dependence on the frequency of wave forcing and on the day used for initializing the basic state.

Smith, Anne K.↗

Stochastic model of temporal changes of wind spectra in the free atmosphere

Data for wind profile spectra changes with respect to time from Cape Kennedy, Florida for the time period from 28 November 1964 to 11 May 1967 have been analyzed. A universal statistical distribution of the spectral change which encompasses all vertical wave numbers, wind speed categories, and elapsed time has been developed for the standard deviation of the time changes of detailed wind profile spectra as a function of wave number.

Huang, Y. H.↗

Mesoscale waves as a probe of Jupiter's deep atmosphere

Images from the Voyager north/south mapping sequences were searched for waves. A remarkable class of mesoscale waves was identified, with the following features: (1) the wavetrains are usually aligned zonally, i.e., wavecrests are north-south; (2) the average wavelength is 300 km with a standard deviation of only 20%; (3) the wavetrains are long; (4) the waves occur within 25 degrees of the equator, the bulk being at the equator itself; (5) the waves are centered at the extrema (in latitude) of the zonal flow; and (6) the meridional extent of the waves is typically 1 degree of latitude. These observations are interpreted as evidence of gravity waves propagating vertically within a leaky duct. A three-level model is assumed composed of a stable duct which extends up to the base of the NH3 cloud deck near 600 mb. Above this is a thin wave-trapping region characterized by a Richardson number Ri less than 1/4 and containing a critical level, where the local value of the zonal flow velocity equals the phase speed of the wave. This in turn is overlain by a stable region, representing the tropopause region and stratosphere.

Flaser, F. M.↗

Shock-wave-induced turbulent boundary-layer separation at hypersonic speeds

An experiment is described that tests and guides computations of the interaction of a shock wave with a turbulent boundary layer. Numerical solutions of the time-averaged Navier-Stokes equations for the entire flow field employing algebraic eddy viscosity and turbulent Prandtl number models for shear stress and heat flux are presented and used to illustrate the dependence of the computations on the particulars of the turbulence models. To guide modifications in the models, the mean flow profiles and surface measurements of pressure, shear, and heat flux are analyzed critically. The results show that the models of eddy viscosity require substantial modifications in the interaction region. Improved solutions employing the experimentally modified models are presented.

Horstman, C. C.↗

An experimental and numerical investigation of shock-wave induced turbulent boundary-layer separation at hypersonic speeds

An experiment designed to test and guide computations of the interaction of an impinging shock wave with a turbulent boundary layer is described. Detailed mean flow-field and surface data are presented for two shock strengths which resulted in attached and separated flows, respectively. Numerical computations, employing the complete time-averaged Navier-Stokes equations along with algebraic eddy-viscosity and turbulent Prandtl number models to describe shear stress and heat flux, are used to illustrate the dependence of the computations on the particulars of the turbulence models. Models appropriate for zero-pressure-gradient flows predicted the overall features of the flow fields, but were deficient in predicting many of the details of the interaction regions. Improvements to the turbulence model parameters were sought through a combination of detailed data analysis and computer simulations which tested the sensitivity of the solutions to model parameter changes. Computer simulations using these improvements are presented and discussed.

Marvin, J. G.↗

Gulf stream ground truth project - Results of the NRL airborne sensors

Results of an airborne study of the waves in the Gulf Stream are presented. These results show that the active microwave sensors (high-flight radar and wind-wave radar) provide consistent and accurate estimates of significant wave height and surface wind speed, respectively. The correlation between the wave height measurements of the high-flight radar and a laser profilometer is excellent.

Mcclain, C. R.↗

Mode properties of low-frequency waves: Kinetic theory versus Hall-MHD

In fluid theory, the ordering of low-frequency modes in a homogeneous plasma is based on the phase velocity, since modes do not intersect each other in dispersion diagrams as a function of wavenumber or other parameters. In linear kinetic theory, modes cross each other. Thus a consistent and useful classification should be based on the physical properties of the modes instead. This paper attempts such a classification by documeting the dispersion and general mode properties of the low-frequency waves (omega much less than (OMEGA(sub ci) OMEGA(sub ce) (exp 1/2)), where OMEGA(sub ci), OMEGA(sub ce) are the cyclotron frequencies of the ions and electrons, respectively) in kinetic theory, and by comparing them to the results of two-fluid theory. Kinetic theory gives a seperate Alfven/ion-cyclotron (A/IC) wave with phase speed Omega/k approximately = v(sub A) cos theta for omega much less than OMEGA(sub ci), where v(sub A) is the Alfven velocity and theta the angle of propagation between wave vector k and background magnetic field B(sub o). For a given wavenumber, the magnetosonic mode is a double-valued solution with a singular point in theta, beta parameter space, where beta is the ratio of thermal pressure to magnetic pressure. It is shown that a branch cut starting at the singular point theta approximately 30 deg, beta approximately 3 and leading to larger beta gives a practical and consitent seperation of this double-valued magnetosonic solution. Selection of this branch cut results in a moderately damped fast/magnetos onic and a heavily damped slow/sound wave. A comprehensive review of the polarization, compressibility and other mode properties is given and shown to be consistent with the selected branch cut. At small wavenumbers, the kinetic mode properties typically start to deviate significantly from their fluid counterparts at beta approximately 0.5. At larger beta, there is no longer a consistent correspondence between the fluid and kinetic modes. Kinetic theory also dictates the use of different mode properties to distinguish between them in observational data. For example, the phase between the density and magnetic field perturbation may become useless at high beta, whereas the direction of the magnetic field perturbations with respect to k and B(sub o) remains a useful characteristic. Two quantities based on this characteristic are suggested and are shown to be useful also to distinguish between the mirror mode and A/IC waves in a plasma with temperature anisotropy.

Krauss-Varban, D.↗

Motion of the sources for type II and type IV radio bursts and flare-associated interplanetary disturbances

Shock waves are indirectly observed as the source of type II radio bursts, whereas magnetic bottles are identified as the source of moving metric type IV radio bursts. The difference between the expansion speeds of these waves and bottles is examined during their generation and propagation near the flare regions. It is shown that, although generated in the explosive phase of flares, the bottles behave quite differently from the waves and that the bottles are generally much slower than the waves. It has been suggested that the waves are related to flare-associated interplanetary disturbances which produce SSC geomagnetic storms. These disturbances may, therefore, be identified as interplanetary shock waves. The relationship among magnetic bottles, shock waves near the sun, and flare-associated disturbances in interplanetary space is briefly discussed.

Sakurai, K.↗

The interaction of moderately strong shock waves with thick perforated walls of low porosity

A theoretical prediction is given of the flow through thick perforated walls of low porosity resulting from the impingement of a moderately strong traveling shock wave. The model was a flat plate positioned normal to the direction of the flow. Holes bored in the plate parallel to the direction of the flow provided nominal hole length-to-diameter ratios of 10:1 and an axial porosity of 25 percent of the flow channel cross section. The flow field behind the reflected shock wave was assumed to behave as a reservoir producing a quasi-steady duct flow through the model. Rayleigh and Fanno duct flow theoretical computations for each of three possible auxiliary wave patterns that can be associated with the transmitted shock (to satisfy contact surface compatibility) were used to provide bounding solutions as an alternative to the more complex influence coefficients method. Qualitative and quantitative behavior was verified in a 1.5- by 2.0-in. helium shock tube. High speed Schlieren photography, piezoelectric pressure-time histories, and electronic-counter wave speed measurements were used to assess the extent of correlation with the theoretical flow models. Reduced data indicated the adequacy of the bounding theory approach to predict wave phenomena and quantitative response.

Grant, D. J.↗

Simplified calculation of wave-coupling between lines in high-speed integrated circuits

The construction of time-domain solutions by the superposition of modes is explained for the general case, which may not have any symmetry in the lines or terminations. This simplified method requires that the logic-gate terminal impedances be approximated by linear effective resistances that can be adequately determined by SPICE analysis of the actual logic gates. Several examples of results of crosstalk calculations made by the simplified method are presented and compared with corresponding results obtained using the SPICE transmission-line methods of Tripathi and Rettig (1985) along with full SPICE models of the logic gates. The simplified approach is shown to give satisfactory agreement for most purposes.

Matthaei, George L.↗

Interaction between a normal shock wave and a turbulent boundary layer at high transonic speeds. I - Pressure distribution

Asymptotic solutions are derived for the pressure distribution in the interaction of a weak normal shock wave with a turbulent boundary layer. The undisturbed boundary layer is characterized by the law of the wall and the law of the wake for compressible flow. In the limiting case considered, for 'high' transonic speeds, the sonic line is very close to the wall. Comparisons with experiment are shown, with corrections included for the effect of longitudinal wall curvature and for the boundary-layer displacement effect in a circular pipe.

Messiter, A. F.↗

Transport of time-varying plasma currents by whistler wave packets

The relationship between pulsed currents and electromagnetic waves is examined in a regime characterized by electron MHD. Pulsed currents are generated by (1) collection/emission of charged particles by/from biased electrodes and (2) induction of currents by time-varying and moving magnetic fields. Pulsed currents are observed to propagate at the speed of whistler wave packets. Their field structure forms ropelike configurations which are electromagnetically force-free. Moving sources induce 'eddy' currents which excite waves and form Cerenkov-like whistler 'wings'. The radiation patterns of moving magnetic antennas and electrodynamic tethers are investigated. Nonlinear effects of large-amplitude, antenna-launched whistler pulses are observed. These involve a new modulational instability in which a channel of high conductivity which permits the wave/currents to penetrate deeply into a collisional plasma is formed.

Stenzel, R. L.↗

Propagation pattern of interplanetary shock waves associated with solar proton flares

The two dimensional pattern of interplanetary shock waves is deduced by taking into account the solar longitude dependence of the time intervals between SSC geomagnetic storms and responsible flares. This pattern near the earth's orbit is not symmetric with respect to the meridian plane which crosses the position of the flare, and the highest speed of this wave propagation is observed in the direction about 30 degrees east of this meridian plane. The magnitude of the Forbush decreases of galactic cosmic rays also varies with the longitude positions of those flares. This is used to estimate the distribution of magnetic fields behind the shock waves.

Sakurai, K.↗