Search NASA⌕ Search

SEARCH · Search NASA

Results for “yield analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Sonic-point capturing

A prototype scheme that produces perfectly smooth transonic solutions to nozzle-flow problems is derived and tested. The basic upwind scheme is described as well as satisfying the entropy condition, treatment of the source term, and numerical verification. The analysis yielded a numerical flux function for use near a sonic point, which is based on a full model of a transonic expansion wave, and a matched treatment for the source term.

Van Leer, Bram↗

Emittance bounds for transient radiative cooling of a scattering rectangular region

Transient cooling was analyzed for a two-dimensional gray rectangular region that emits, absorbs, and isotropically scatters radiation. The region, initially at uniform temperature, is placed in surroundings at a much lower temperature. The cooling analysis yields two simultaneous equations for the transient temperature and scattering source function distributions. The region starts to cool with the medium at uniform temperature. For this condition, the local emittance around the perimeter was obtained by a numerical solution of the radiative equations, and the rate of heat loss from the entire medium was evaluated. As cooling continues, the emissive ability decreases because of the lower temperatures in the outer regions of the rectangle. Based on some previous work, a lower limit for the transient overall emittance was found by obtaining a similarity solution. For some ranges of optical thickness and scattering albedo, the lower limit is only a small amount below the initial emittance. For these conditions, the initial emittance can be used to compute the entire transient resulting in a considerable simplification.

Siegel, Robert↗

Deflection And Stress In Preloaded Square Membrane

Theoretical analysis yields equations for transverse deflection of, and stresses in, square membrane subject to both uniform transverse load and tension preloads applied uniformly along the edges. Follows energy/virtual-displacement approach. Basic equation expresses strain energy in membrane as double integral, over x and y coordinates of square, of function of longitudinal strains, shear strain, thickness of membrane, and Young's modulus and Poissons's ratio of membrane material.

Hermida, Alfonso↗

STARS: An integrated general-purpose finite element structural, aeroelastic, and aeroservoelastic analysis computer program

The details of an integrated general-purpose finite element structural analysis computer program which is also capable of solving complex multidisciplinary problems is presented. Thus, the SOLIDS module of the program possesses an extensive finite element library suitable for modeling most practical problems and is capable of solving statics, vibration, buckling, and dynamic response problems of complex structures, including spinning ones. The aerodynamic module, AERO, enables computation of unsteady aerodynamic forces for both subsonic and supersonic flow for subsequent flutter and divergence analysis of the structure. The associated aeroservoelastic analysis module, ASE, effects aero-structural-control stability analysis yielding frequency responses as well as damping characteristics of the structure. The program is written in standard FORTRAN to run on a wide variety of computers. Extensive graphics, preprocessing, and postprocessing routines are also available pertaining to a number of terminals.

Gupta, Kajal K.↗

The P/Halley: Spatial distribution and scale lengths for C2, CN, NH2, and H2O

From P/Halley long slit spectroscopic exposures on 12 dates, extending from Oct. 1985 to May 1986, spatial profiles were obtained for emissions by C2, CN, NH2, and OI(1D). Haser model scale lengths were fitted to these data. The extended time coverage allowed the checking for consistency between the various dates. The time varying production rate of P/Halley severely affected the profiles after perihelion, which is shown in two profile sequences on adjacent dates. Because of the time varying production rate, it was not possible to obtain reliable Haser model scale lengths after perihelion. The pre-perihelion analysis yielded Haser model scale lengths of sufficient consistency that they can be used for production rate determinations, whenever it is necessary to extrapolate from observed column densities within finite observing apertures. Results of scale lengths reduced to 1 AU are given and discussed.

Fink, Uwe↗

Local delamination in laminates with angle ply matrix cracks. Part 1: Tension tests and stress analysis

Quasi-static tension tests were conducted on AS4/3501-6 graphite epoxy laminates. Dye penetrant enhanced x-radiography was used to document the onset of matrix cracking and the onset of local delaminations at the intersection of the matrix cracks and the free edge. Edge micrographs taken after the onset of damage were used to verify the location of the matrix cracks and local delamination through the laminate thickness. A quasi-3D finite element analysis was conducted to calculate the stresses responsible for matrix cracking in the off-axis plies. Laminated plate theory indicated that the transverse normal stresses were compressive. However, the finite element analysis yielded tensile transverse normal stresses near the free edge. Matrix cracks formed in the off-axis plies near the free edge where in-plane transverse stresses were tensile and had their greatest magnitude. The influence of the matrix crack on interlaminar stresses is also discussed.

Obrien, T. Kevin↗

Test chips and ASIC qualification

A test chip set being developed to aid in the qualification of spaceborne Application Specific Integrated Circuits (ASICs) is described. The chip set consists of a process monitor for process parameter verification, a fault chip for yield analysis, a reliability chip for ASIC failure rate analysis, and total ionizing dose and single event upset chips for radiation effect analysis. The test structures contained in these chips are discussed along with representative test results.

Buehler, M. G.↗

New plant and controller order reduction results with weighted balancing

A frequency-response error analysis for frequency-weighted internally balanced (FWIB) truncation is extended and an exact error bound for a case of order reduction by one state is presented. An approximate error bound for a general case of order reduction by more than one state, assuming that only small controllability-observability measures are truncated, is considered. FWIB residualization is presented, and it is shown that a frequency-response error analysis yields results similar to those found for FWIB truncation. It is concluded that FWIB truncation and residualization can be used in a coordinated manner consistent with classical truncation and residualization in order to obtain accuracy higher than that possible from either technique used alone.

Newman, Brett↗

An extragalactic reference frame from DSN VLBI measurements - 1989

Assessment of the impact of recent improvements Deep Space Network (DSN) instrumentation, as well as of joint data analyses, provide a prognosis for the accuracy level to be expected in future realizations of an inertial radio reference frame. Intercontinental dual-frequency radio interferometric measurements during 68 sessions (including two recent sessions employing Mark III instrumentation) from 1978 to 1989 using NASA's DSN stations in California, Spain, and Australia give 8900 pairs of delay and delay-rate observations. Analysis yields a catalog of positions of 200 extragalactic radio sources north of -45 deg declination. The resulting source-position formal uncertainty distributions peak below 1 milliarcsecond, with 75 percent being smaller than 2 mas. Comparison with independent measurements shows some evidence for systematic errors at the milliarcsecond level.

Sovers, O. J.↗

Approximate Solutions Of Equations Of Steady Diffusion

Rigorous analysis yields reliable criteria for "best-fit" functions. Improved "curve-fitting" method yields approximate solutions to differential equations of steady-state diffusion. Method applies to problems in which rates of diffusion depend linearly or nonlinearly on concentrations of diffusants, approximate solutions analytic or numerical, and boundary conditions of Dirichlet type, of Neumann type, or mixture of both types. Applied to equations for diffusion of charge carriers in semiconductors in which mobilities and lifetimes of charge carriers depend on concentrations.

Edmonds, Larry D.↗

Heavy ion measurement on LDEF

A stack of CR-39 and Kodak CN track detectors was exposed on the NASA satellite LDEF and recovered after almost six years in space. The quick look analysis yielded heavy ion tracks on a background of low energy secondaries from proton interaction. The detected heavy ions show a steep energy spectrum which indicates a radiation belt origin.

Beaujean, R.↗

Comet P/Halley - Spatial distributions and scale lengths for C2, CN, NH2, and H2O

Long-slit spectroscopic observations of Comet P/Halley on 12 dates between October 1985 and May 1986 were used to extract spatial profiles for C2, CN, NH2, and O I (1D) (which effectively map out the comet's H2O distribution), and Haser model scale lengths were fitted to these data. The preperihelion analysis yielded Haser model scale lengths of sufficient consistency that they could be used for the production rate determinations. It was found that the average parent scale lengths found for NH2 were consistent with photodissociation lifetimes for NH3 and confirm the dissociation chain NH3-NH2-NH.

Fink, Uwe↗

Short-time Lyapunov exponent analysis and the transition to chaos in Taylor-Couette flow

The physical mechanism driving the weakly chaotic Taylor-Couette flow is investigated using the short-time Liapunov exponent analysis. In this procedure, the transition from quasi-periodicity to chaos is studied using direct numerical 3D simulations of axially periodic Taylor-Couette flow, and a partial Liapunov exponent spectrum for the flow is computed by simultaneously advancing the full solution and a set of perturbations. It is shown that the short-time Liapunov exponent analysis yields more information on the exponents and dimension than that obtained from the common Liapunov exponent calculations. Results show that the chaotic state studied here is caused by a Kelvin-Helmholtz-type instability of the outflow boundary jet of Taylor vortices.

Vastano, John A.↗

The distribution of nearby rich clusters of galaxies

Redshifts are acquired for a complete sample of 351 Abell clusters with tenth-ranked galaxy magnitudes (m10) less than or equal to 16.5, including 115 entirely new cluster redshifts. Analysis of the spatial distribution of these clusters reveals no clustering on scales larger than 75/h Mpc. The correlation length is 20.0 (+/-4.3)/h Mpc, consistent with the results from other surveys. The frequency of voids with radii of order 60/h Mpc or less is consistent with the form and amplitude of the observed two-point correlation function. There is no significant difference between the clustering properties of clusters with RC = 0 and RC not less than 1. A percolation analysis yields 23 superclusters, 17 of which are new. The superclusters are not significantly elongated in the radial direction; large-scale peculiar motions are of order 1000 km/s or less.

Postman, Marc↗

Space Station Freedom main truss thermal analysis

The main truss structure of the Permanently Manned Capability configuration of the Space Station Freedom is analyzed in order to evaluate orbital heating loads and determine the temperature distributions and temperature gradients in the structure. The results are to be utilized in a thermal/structure analysis in the determination of thermal stresses and deflections in the truss members caused by solar heating loads and by shadowing of the truss members by other segments of the Space Station as it moves around the orbit. A SINDA thermal finite different model and a TRASYS radiation interchange model of the truss were generated automatically from a NASTRAN finite element structural model. The analysis yielded transient temperature distribution in the truss structure around the orbit, indicating large temperature gradients in the structure.

Warren, Andrew H.↗

Calorimetric determination of thermal parameters for the Li/BrCl in SOCl2 (BCX) chemistry

The heat capacity of a Li-BCX DD-cell was found to be dependent on its state of charge by drop calorimetry measurements. The method of drop calorimetry involves measuring the energy (joules) gained or lost from a sample that is transferred from a bath at temperature A to one at temperature B. The thermoneutral potential is defined as the cell potential where the cell electrochemical reactions are neither exothermic nor endothermic. A Hart scientific calorimeter system, Model No. S77XX, designed for heat conduction calorimetry and drop calorimetry was used. Calorimetric analysis yielded a thermoneutral potential of 4.14 volts and a cell heat capacity dependent on the state of charge.

Darcy, Eric C.↗

On waveform multigrid method

Waveform multigrid method is an efficient method for solving certain classes of time dependent PDEs. This paper studies the relationship between this method and the analogous multigrid method for steady-state problems. Using a Fourier-Laplace analysis, practical convergence rate estimates of the waveform multigrid iterations are obtained. Experimental results show that the analysis yields accurate performance prediction.

Taasan, Shlomo↗

A study of the application of power-spectral methods of generalized harmonic analysis to gust loads on airplanes

The applicability of some results from the theory of generalized harmonic analysis (or power-spectral analysis) to the analysis of gust loads on airplanes in continuous rough air is examined. The general relations for linear systems between power spectrums of a random input disturbance and an output response are used to relate the spectrum of airplane load in rough air to the spectrum of atmospheric gust velocity. The power spectrum of loads is shown to provide a measure of the load intensity in terms of the standard deviation (root mean square) of the load distribution for an airplane in flight through continuous rough air. For the case of a load output having a normal distribution, which appears from experimental evidence to apply to homogeneous rough air, the standard deviation is shown to describe the probability distribution of loads or the proportion of total time that the load has given values. Thus, for airplane in flight through homogeneous rough air, the probability distribution of loads may be determined from a power-spectral analysis. In order to illustrate the application of power-spectral analysis to gust-load analysis and to obtain an insight into the relations between loads and airplane gust-response characteristics, two selected series of calculations are presented. The results indicate that both methods of analysis yield results that are consistent to a first approximation.

Press, Harry↗