Search NASA⌕ Search

SEARCH · Search NASA

Results for “(Astronomical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Infrared Astronomical Satellite (IRAS) analysis, introduction

Stray light transmittance analysis on a design of the Infrared Astronomical Satellite (IRAS) is presented. The system was evaluated for scattered radiation propagation with the use of the APART (Arizon's Paraxial Analysis of Radiation Transfer), and the propagation of diffracted energy with both PADE (Paraxial Analysis of Diffracted Energy) and the GUERAP II programs. The scattered radiation analysis was performed by using both a 5% diffuse black on the baffle and vane surfaces and by using a mathematical model of the Martin Black scattering characteristics. The sources of infrared radiation and of radiation in the visible wavelengths are identified. Diffraction effects are dominant only at the large off-axis angles, except for a few specific cases and smaller angles. At the longer wavelengths the diffraction contributions go up significantly. It is the comparative increase which determines which propagation process predominates. Combined transmittance values are presented.

Source record↗
NASA NTRS1980

X-ray astronomical spectroscopy

The elementary spectral signatures of fundamental physical processes that might be operable in galactic and extragalactic X-ray sources are reviewed. Some of the instrument limitations of experimental techniques used in X-ray astronomical spectroscopy are described. X-ray spectroscopic measurements are examined for various types of X-ray-emitting objects, including degenerate and nondegenerate stellar systems, supernova remnants, clusters of galaxies, active galactic nuclei, and quasars.

Holt, S. S.↗
NASA NTRS1980

A dual charge-coupled device /CCD/, astronomical spectrometer and direct imaging camera. I - Optical and detector systems

The MASCOT (MIT Astronomical Spectrometer/Camera for Optical Telescopes), an instrument capable of simultaneously performing both direct imaging and spectrometry of faint objects, is examined. An optical layout is given of the instrument which uses two CCD's mounted on the same temperature regulated detector block. Two sources of noise on the signal are discussed: (1) the CCD readout noise, which results in a constant uncertainty in the number of electrons collected from each pixel; and (2) the photon counting noise. The sensitivity of the device is limited by the sky brightness, the overall quantum efficiency, the resolution, and the readout noise of the CCD. Therefore, total system efficiency is calculated at about 15%.

Meyer, S. S.↗
NASA NTRS1980

Dual charge-coupled device /CCD/, astronomical spectrometer and direct imaging camera. II - Data handling and control systems

The data collection system for the MASCOT (MIT Astronomical Spectrometer/Camera for Optical Telescopes) is described. The system relies on an RCA 1802 microprocessor-based controller, which serves to collect and format data, to present data to a scan converter, and to operate a device communication bus. A NOVA minicomputer is used to record and recall frame images and to perform refined image processing. The RCA 1802 also provides instrument mode control for the MASCOT. Commands are issued using STOIC, a FORTH-like language. Sufficient flexibility has been provided so that a variety of CCDs can be accommodated.

Dewey, D.↗
NASA NTRS1980

Infrared Astronomical Satellite /IRAS/ Scientific Data Analysis System

The Infrared Astronomical Satellite (IRAS), to be launched in 1982, is discussed. It will systematically survey the entire sky over a large percentage of the infrared spectrum, in the wavelength region of 8 to 120 microns, at sensitivities a hundred times greater than previously achieved from high-altitude observatories, aircraft, balloons or sounding rockets. The Scientific Data Analysis System (SDAS), an off-line data processing facility, is examined. Its primary function is to produce a catalog of inertially fixed infrared-emitting point sources (mainly stars and galaxies) observed during the IRAS survey. Details for source detection and confirmation are given. It is estimated that the catalog will contain approximately a million objects having a brightness of 10 amtowatts per square centimeter or greater; 125,000 SDAS detections, if spurious events of signal-to-noise ratios greater than 2.5 are included, will be made every day.

Duxbury, J. H.↗
NASA NTRS1980

Source detection for the infrared astronomical satellite

A recursive algorithm is described which detects and characterizes point sources and extended sources in the data obtained from the Infrared Astronomical Satellite (IRAS) in the presence of non-stationary noise. The analysis of tests using simulated data indicates that the performance of the point source detector is very close to that expected from a matched filter with stationary gaussian noise. The false alarm rate of the extended source detector tends to be higher than expected at a given SNR.

Aumann, H. H.↗
NASA NTRS1980

The Infrared Astronomical Satellite /IRAS/ Scientific Data Analysis System /SDAS/ sky flux subsystem

The sky flux subsystem of the Infrared Astronomical Satellite Scientific Data Analysis System is described. Its major output capabilities are (1) the all-sky lune maps (8-arcminute pixel size), (2) galactic plane maps (2-arcminute pixel size) and (3) regional maps of small areas such as extended sources greater than 1-degree in extent. The major processing functions are to (1) merge the CRDD and pointing data, (2) phase the detector streams, (3) compress the detector streams in the in-scan and cross-scan directions, and (4) extract data. Functional diagrams of the various capabilities of the subsystem are given. Although this device is inherently nonimaging, various calibrated and geometrically controlled imaging products are created, suitable for quantitative and qualitative scientific interpretation.

Stagner, J. R.↗
NASA NTRS1980

Contamination control of the Infrared Astronomical Satellite

The Infrared Astronomical Satellite, to be launched in August 1981, will perform an all-sky survey in the 8-120 micron wavelength region. High sensitivity to thermal radiation and the low operating temperature of optics and thermal control surfaces make the IRAS telescope extremely vulnerable to contamination. Four special topics of importance are discussed in this paper: (1) deposition of atmospheric gases; (2) sighting of particles released from the satellite; (3) functions of a deployable aperture cover; and (4) degradation of a radiatively cooled sunshade from spacecraft outgassing. These topics demonstrate how mission strategy, ground cleaning and handling, and hardware design are used to avoid contamination which would degrade telescope performance.

Andreozzi, L. C.↗
NASA NTRS1981

Stray radiation and the Infrared Astronomical Satellite /IRAS/ telescope

Stray light control is a major consideration in the design of infrared cryogenically cooled telescopes such as the Infrared Astronomical Satellite (IRAS). The basic design of the baffle system, and the placement, shape, and coating of the secondary support struts for the telescope subsystem are described. The intent of this paper is to highlight the stray light problems encountered while designing the system, and to illustrate how computer analysis can be a useful design aid. Scattering measurements of the primary mirror, and a full system level scatter measurement are presented. Comparisons of predicted performance with the measured results are also presented.

Noll, R. J.↗
NASA NTRS1981

Visible light scatter measurements of the Advanced X-ray Astronomical Facility /AXAF/ mirror samples

NASA is studying the properties of mirror surfaces for X-ray telescopes, the data of which will be used to develop the telescope system for the Advanced X-ray Astronomical Facility. Visible light scatter measurements, using a computer controlled scanner, are made of various mirror samples to determine surface roughness. Total diffuse scatter is calculated using numerical integration techniques and used to estimate the rms surface roughness. The data measurements are then compared with X-ray scatter measurements of the same samples. A summary of the data generated is presented, along with graphs showing changes in scatter on samples before and after cleaning. Results show that very smooth surfaces can be polished on the common substrate materials (from 2 to 10 Angstroms), and nickel appears to give the lowest visible light scatter.

Griner, D. B.↗
NASA NTRS1980

Design of infrared astronomical satellite /IRAS/ primary mirror mounts

The design of an operational mount to rigidly secure the primary mirror to its baseplate without the introduction of figure error always proves to be a major task on diffraction limited optical systems. A summary of the design of the Infrared Astronomical Satellite (IRAS) primary mirror mount is given. The mirror was designed to be alligned and tested at room temperature and operated in a zero 'g' field at temperatures of 2K. To minimize overstressing, a stiffness requirement of greater than 150 Hz was required for cold launch and room temperature vibration acceptance testing. Additional isolation was required to minimize strains, introduced via the mounting base, due to thermal and mechanical distortions.

Schreibman, M.↗
NASA NTRS1980

Alignment and evaluation of the cryogenic corrected infrared astronomical satellite /IRAS/ telescope

Room temperature alignment and evaluation techniques for the Infrared Astronomical Satellite (IRAS) telescope, which has a primary mirror figured to correct for surface distortions and the 2 K operating temperature are discussed. Interferometric cryogenic testing of the 0.6 m, f/1.5 lightweighted beryllium primary mirror at its intended operating temperature reveals surface distortions that can be modeled with Zernike polynomials. With this model, it becomes possible to derive the 'inverse' of the cryowavefront error (ideal cryo mirror) and to figure the cryo correction into the primary mirror using Perkin-Elmer's Computer Controlled Polisher. It is recognized that during room temperature assembly of the system, misalignment of the secondary mirror can introduce additional unwanted aberrations that may cancel or distort the wavefront errors purposely introduced by the cryo figuring. To avoid this possible degradation and to ensure optimum telescope performance, the system Zernike polynomial coefficients and wavefront maps generated from the in-process alignment interferograms are monitored and compared to Zernike coefficients and wavefront maps for the cryo corrected primary mirror.

Harned, N.↗
NASA NTRS1981

Astronomical data bases and retrieval systems

The status of the development of machine-readable stellar and extragalactic data bases is summarized, including several examples of astronomical applications using these data sets. The creation of a computerized bibliographical data base for cometary research is described.

Mead, J. M.↗
NASA NTRS1982

Combined ultraviolet studies of astronomical sources

Ultraviolet studies of astronomical sources are discussed. Some studies utilized IVE data. Non-radiative shock at the edge of the Cygnses Loop, stellar flares, local interestellar medium, hot galaxies, stellar mass ejection, contact binaries, double quasars, and stellar chromosphere and coronae are discussed.

Dupree, A. K.↗
NASA NTRS1981

Sunshade/radiative cooler for IRAS infrared astronomical satellite

The Infrared Astronomical Satellite (IRAS) is a joint project shared by the United States and the Netherlands with the United Kingdom providing tracking and ground support services. IRAS features a cryogenically cooled telescope designed to perform an unbiased all-sky survey of the far infrared spectrum from 8 to 120 microns and to observe objects of special interest. The sunshade is designed to protect the telescope aperture and sunshade radiators from: direct solar radiation; direct earth radiation; radiation exchange with satellite structures; excessive aperture heating caused by sunshade inner cone emission. The sunshade three-stage radiative cooler design meets the listed requirements and, in addition, provides some contamination protection for the telescope aperture and optical surfaces during pointing maneuvers when the telescope is tilted in the direction of the velocity vector. Unless protected by the sunshade, the ram effect can cause molecules to enter the aperture and deposit on the cooled optical surfaces. This paper describes the sunshade design, the thermal analyses, and the results of thermal balance testing of the flight hardware.

Anderson, R. R.↗
NASA NTRS1981

Optical studies of X-ray sources with the MASCOT - A charge-coupled device /CCD/-based astronomical instrument

The performance levels achieved by the MASCOT (MIT Astronomical Spectrometer/Camera for Optical Telescopes) on the 1.3-m telescope at the McGraw-Hill observatory in March 1981 are discussed along with preliminary data obtained in searches for optical counterparts to four 'empty-field' X-ray sources. In the W band (4000-7000 A), the MASCOT achieved a sky-limited sensitivity of +24.4 mag per sq arcsec in an 1800 s integration. The ability to flatten pictures to a level consistent with (sky + source) photon statistics and readout noise was demonstrated. For the four sources observed, an optical counterpart was established for one source (1413+13) based on positional coincidence (better than 1.8 arcsec), four possible candidates were detected in the error box of another source (1009?35) and upper sensitivity limits were established for optical counterparts in the error boxes for the other two sources (0920+39 and 0931-11).

Ricker, G. R.↗
NASA NTRS1982

Results from the Orbiting Astronomical Observatory. XLI - Photometry of M31 and M33

Filter photometry observations from the Orbiting Astronomical Observatory, in six wavelength bands between 1550 and 4250 A, are reported for several positions along the major and minor axes in M31 and at some positions in M33. The spatial resolution is 10 arcmin. The colors along the major axis of M31 within about 20 arcmin of the nucleus are similar to the nucleus; at 45 arcmin the colors are much bluer, indicating a spiral arm population. This behavior is expected from other observations of H I, CO, and early-type stars, which are all concentrated in a ring of material whose inner edge is about 7 kpc (= 35 arcmin) from the nucleus. The center of M33 is bluer than the ring of M31, and the arms of M33 even bluer. There are no colors too blue to be explained (within observational error) by unreddened B stars.

Davis, J.↗