Search NASA⌕ Search

SEARCH · Search NASA

Results for “(S)TEM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Inelastic deformation and dislocation structure of a nickel alloy - Effects of deformation and thermal histories

Inelastic deformation behavior of the cast Ni-base alloy, B1900 + Hf, was investigated using data from step-temperature tensile tests and thermomechanical cyclic tests in the temperature ranges 538-760 C and 760-982 C. The deformation results were correlated with the dislocation structures of deformed specimens, identified by TEM. It was found that, in the 760-982 C temperature range, there are no thermal history effects in the inelastic deformation behavior of B1900 + Hf. In the 538-760 range, anomalous cyclic hardening and, possibly, thermal history effects were observed in thermomechanically deformed alloy, caused by sessile (010) dislocations in the gamma-prime phase.

Chan, K. S.↗

Life on Mars - How it disappeared (if it was ever there)

Information available on Mars chemistry suggest that conditions on early Mars may have been suitable for life. This paper examines the possible events that led to the disappearance of life, assuming it existed, from the surface of Mars. The sequence of events leading to life extinction on early Mars assumes the following steps: (1) a decrease of temperature and humidity levels, leading to a selection of microorganisms for tolerance of low temperatures and arid conditions; (2) further deterioration of environment leading to withdrawal of cold-adapted organisms to protected niches under the surface; (3) further cooling producing heavy stresses in these organisms; and (4) further deterioration of the environment resulting in extinction. This sequence of events is considered parallel events documented for the microbial community in the Ross Desert of Antarctica, where TEM examinations of the material detected progressive stages of cell damage and death.

Friedmann, E. Imre↗

Nature and origin of matrix in the unique type 3 chondrite, Kakangari

The characteristics of the matrix of the Kakangari type-3 chondrite were investigated using high-resolution TEM and AEM. It was found that the textural and mineralogical characteristics of the fine-grained matrix of Kakangari are different from those of the other chondrite groups. Unlike the matrix phases present in the CV3 and CO3 chondrites, the matrix mineralogy of Kakangari contains clear information regarding its possible origin and thermal history. Data obtained are most consistent with an origin of Kakangari by annealing, without melting at high temperature (possibly during a chondrule-forming thermal event), of clusters or aggregates of ultrafine-grained amorphous or crystalline phases. The precursor materials were most likely to have been a mixture of nebula and presolar dust. Chondrules in Kakangari were probably formed from identical precursors to the matrix, but reached temperatures sufficiently high to produce melting.

Brearley, Adrian J.↗

Qualification of improved joint heaters

Qualification testing of the Redesigned Solid Rocket Motor improved igniter-to-case joint and field joint heaters was conducted on the fired TEM-04 static test motor and was completed on 7 Sep. 1989. The purpose of the test was to certify the installation and performance of the improved joint heaters for use on flight motors. The changes incorporated in the improved heaters improve durability and should reduce handling damage. The igniter-to-case joint and field joint primary heater circuits were subjected to five 20-hr ON cycles. The heater redundant circuits were then subjected to one 20-hr ON cycle. Voltage, current, and temperature set point values were maintained within the specified limits for both heaters during each ON cycle. When testing was complete, both heaters were removed and inspected. No discolorations or any other anomalies were found on either of the heaters. Based on the successful completion of this test, it is recommended that the improved igniter-to-case joint and field joint heaters be used on future flight motors.

Cook, M.↗

Thiokol/Wasatch installation evaluation of the redesigned field joint protection system (concepts 1 and 3)

The procedures, performance, and results obtained from the Thiokol Corporation/Wasatch Redesigned Field Joint Protection System (FJPS) Installation Evaluation are documented. The purpose of the evaluation was to demonstrate and develop the procedures required to install two different concepts (referred to as Concepts 1 and 3) of the redesigned FJPS. The processing capability of each configuration was then evaluated and compared. The FJPS is installed on redesigned solid rocket motors (RSRM) to protect the field joints from rain intrusion and to maintain the joint temperature sensor measurement between 85 and 122 F while the boosters are on the launch pad. The FJPS is being redesigned to reduce installation timelines at KSC and to simplify or eliminate installation processing problems related to the present design of an EPDM moisture seal/extruded cork combination. Several installation techniques were evaluated, and a preferred method of application was developed for each concept. The installations were performed with the test article in the vertical (flight) position. Comparative timelines between the two concepts were also developed. An additional evaluation of the Concept 3 configuration was performed with the test article in the horizontal position, to simulate an overhead installation on a technical evaluation motor (TEM).

Cook, M.↗

Experimentally determined wear behavior of an Al2O3-SiC composite from 25 to 1200 C

The sliding wear behavior of a self-mated alumina-silicon carbide whisker toughened composite was studied using optical, scanning electron (SEM) and transmission electron (TEM) microscopy. Because of its excellent strength and toughness properties this composite material is under consideration for use in heat engine applications for sliding contacts which operate at elevated temperatures. The composite's wear behavior and especially its wear mechanisms are not well understood. Pin-on-disk specimens were slid in air at 2.7 m/s sliding velocity, under a 26.5-N load, at temperatures 25 to 1200 C. Pin wear increased with increasing temperature. Based upon the microscopic analyses, the wear mechanism seems to be loosening of the reinforcing whiskers due to frictional and bulk heating. This leads to whisker pullout and increased wear.

Dellacorte, Christopher↗

On diamond, graphitic and amorphous carbons in primitive extraterrestrial solar system materials

Carbon is among the most abundant elements in the universe and carbon chemistry in meteorites and comets is an important key to understanding many Solar System and interstellar processes. Yet, the mineralogical properties and interrelations between various structural forms of elemental carbon remain ambiguous. Crystalline elemental carbons include rhombohedral graphite, hexagonal graphite, cubic diamond, hexagonal diamond (i.e., lonsdaleite or carbon-2H) and chaoite. Elemental carbon also occurs as amorphous carbon and poorly graphitized (or turbostratic) carbon but of all the forms of elemental carbon only graphite is stable under physical conditions that prevail in small Solar System bodies and in the interstellar medium. The recent discovery of cubic diamond in carbonaceous chondrites and hexagonal diamond in chondritic interplanetary dust particles (IDPs) have created a renewed interest in the crystalline elemental carbons that were not formed by shock processes on a parent body. Another technique, Raman spectroscopy, confirms a widespread occurrence of disordered graphite in the Allende carbonaceous chondrite and in chondritic IDPs. Elemental carbons have also been identified by their characteristic K-edge features in electron energy loss spectra (EELS). However, the spectroscopic data do not necessarily coincide with those obtained by selected area electron diffraction (SAED). In order to interpret these data in terms of rational crystalline structures, it may be useful to consider the principles underlying electron diffraction and spectroscopic analyses. Electron diffraction depends on electron scattering, on the type of atom and the distance between atoms in a crystal lattice. Spectroscopic data are a function of the type of atom and the energy of bonds between atoms. Also, SAED is a bulk sampling technique when compared to techniques such as Raman spectroscopy or EELS. Thus, it appears that combined analyses provide contradictory results and that amorphous, or short-range ordered, carbon identified by conventional TEM imaging and SAED may show evidence for sp(3) bonds in EELS spectra. It is suggested that complex, nanometer-scale, mineralogical interrelations are common to all elemental carbons irrespective of their origin. The subsequent thermal history, or energy balance, will determine the ultimate microstructure.

Rietmeijer, Frans J. M.↗

Effect of shock pressure on the structure and superconducting properties of Y-Ba-Cu-O in explosively fabricated bulk metal-matrix composites

While it is now well established that copper-oxide-based powder, or virtually any other ceramic superconductor powder, can be consolidated and encapsulated within a metal matrix by explosive consolidation, the erratic superconductivity following fabrication has posed a major problem for bulk applications. The nature of this behavior was found to arise from microstructural damage created in the shock wave front, and the residual degradation in superconductivity was demonstrated to be directly related to the peak shock pressure. The explosively fabricated or shock loaded YBa2Cu3Ox examples exhibit drastically altered rho (or R) - T curves. The deterioration in superconductivity is even more noticeable in the measurement of ac magnetic susceptibility and flux exclusion or shielding fraction which is also reduced in proportion to increasing peak shock pressure. The high-frequency surface resistance (in the GHz range) is also correspondingly compromised in explosively fabricated, bulk metal-matrix composites based on YBa2Cu3O7. Transmission electron microscopy (including lattice imaging techniques) is being applied in an effort to elucidate the fundamental (microstructural) nature of the shock-induced degradation of superconductivity and normal state conductivity. One focus of TEM observations has assumed that oxygen displaced from b-chains rather than oxygen-vacancy disorder in the basal plane of oxygen deficient YBa2Cu3Ox may be a prime mechanism. Shock-wave displaced oxygen may also be locked into new positions or interstitial clusters or chemically bound to displaced metal (possibly copper) atoms to form precipitates, or such displacements may cause the equivalent of local lattice cell changes as a result of stoichiometric changes. While the shock-induced suppression of T(sub c) is not desirable in the explosive fabrication of bulk metal-matrix superconductors, it may be turned into an advantage if the atomic-scale distortion can be understood and controlled as local flux pinning sites.

Murr, L. E.↗

Interplanetary dust particles collected in the stratosphere - Observations of atmospheric heating and constraints on their interrelationships and sources

TEM and IR spectroscopy investigations of the interplanetary dust particles (IDPs) collected in the stratosphere have shown the majority of IDPs in the layer-lattice silicate and pyroxene classes to not have been heated to temperatures above 600 C during atmospheric entry. This implies that they arrive at the upper atmosphere with low geocentric encounter velocities, and limits the possible encounter trajectories for these particles to relatively circular prograde orbits. On this basis, it is judged unlikely that these IDPs are from earth-crossing comets or asteroids; collected IDPs dominated by olivine include a larger portion of above-600 C-heated particles, suggesting their capture from more eccentric orbits.

Sandford, Scott A.↗

An investigation of the thermal cycling damage of 25 vol. pct SiCw/alumina ceramic matrix composite

An investigation was made of the thermal cycling damage of a 25 vol pct SiC whisker/alumina (SiCw/Al2O3) composite. Thermal cycling tests were conducted by subjecting a composite specimen to two different fluidized beds. After thermal cycling the composite specimens were subjected to elastic modulus and effective fracture toughness measurements. The thermal cycled specimens were investigated with SEM and TEM studies. It was found that this composite has a relatively high resistance to thermal cycling.

Armstrong, William D.↗

Observations on the brittle to ductile transition temperatures of B2 nickel aluminides with and without zirconium

The effect of a zirconium addition (0.05 at. pct) to a stoichiometric NiAl alloy on the brittle-to-ductile transition temperature (BDTT) of this alloy was investigated. Constant velocity tensile tests were conducted to fracture between 300 and 1100 K under initial strain rate 0.00014/sec, and the true stress and true strain values were determined from plots of load vs time after subtracting the elastic strain. The inelastic strain was measured under a traveling microscope. Microstructural characterization of as-extruded and fractured specimens was carried out by SEM and TEM. It was found that, while the addition of 0.05 at. pct Zr strengthened the NiAl alloy, it increased its BDTT; this shift in the BDTT could not be attributed either to variations in grain size or to impurity contents. Little or no room-temperature ductility was observed for either alloy.

Raj, S. V.↗

Structure and properties during aging of an ultra-high strength Al-Cu-Li-Ag-Mg alloy

The structure and properties of the strengthening phases formed during aging in an Al-Cu-Li-Ag-Mg alloy (Weldalite 049) were elulcidated, by following the development of the microstructure by means of TEM. The results of observations showed that the Weldalite 049 alloy has a series of unusual and technologically useful combinations of mechanical properties in different aging conditions, such as natural aging without prior cold work to produce high strengths, a reversion temper of lower yield strength and unusually high ductility, a room temperature reaging of the reversion temper eventually leading to the original T4 hardness, and ultrahigh-strength T6 properties.

Gayle, Frank W.↗

Solubility and partitioning of Ar in anorthite, diopside, forsterite, spinel, and synthetic basaltic liquids

The solubility and partitioning of Ar in natural anorthite, diopside, forsterite, spinel, and synthetic iron-free basaltic melts was investigated using a new technique that obviates the postquenching phase separation. It was found that the solubility of Ar in the minerals was surprisingly high. Moreover, the solubility of Ar in different samples of a particular mineral run in the same experiment varied more than the solubility in the same sample run in different experiments, suggesting that noble gases are held in lattice vacancy defects. Moreover, the results of TEM imaging revealed no anomalous microstructures, while EXAFS studies of some samples showed that Kr has no preferred site in the lattices, supporting the defect siting conclusion.

Broadhurst, C. Leigh↗

Crystallization of a barium-aluminosilicate glass

The crystallization of a celsian glass composition was investigated as a possible high-temperature ceramic matrix material. Heat treatments invariably resulted in crystallization of the hexaclesian phase unless a flux, such as lithia, was added or a nucleating agent used (e.g., celsian seeds). TEM analysis revealed complex microstructures. Glasses with Mo additions contained hexacelsian, mullite, and an Mo-rich glass. Li2O additions stabilized celsian but mullite and Mo-rich glass were still present.

Drummond, C. H., III↗

Crack initiation and growth toughness of an aluminum metal-matrix composite

The effects of systematic changes in matrix microstructure on crack initiation and growth toughnesses were determined on an Al-Zn-Mg-Cu alloy containing 0, 15, 20 percent by volume of SiC particulates. Materials were heat treated to underaged (UA) and overaged (OA) conditions of equivalent matrix microhardness and flow stress. Although both the fracture initiation and growth toughnesses, as measured by JIc and tearing modulus, were similar for the unreinforced materials in the UA and OA conditions, significant effects of microstructure on both JIc and tearing modulus were observed in the composites. SEM and TEM observations of fracture paths in the two conditions are utilized to rationalize these observations in light of existing theories of ductile fracture propagation.

Manoharan, M.↗

Carbon-rich aggregates in type 3 ordinary chondrites - Characterization, origins, and thermal history

Carbon-rich aggregates from three type 3.4-3.6 ordinary chondrites and two chondritic clasts have been characterized in detail, using TEM techniques. The aggregates in all the meteorites studied range in size from 5-1000 microns and consist of a fine scale intergrowth of poorly graphitized carbon, amorphous carbon, Fe,Ni metal, and minor chromite. Contrary to previous reports, well-crystallized graphite and magnetite are absent. The association of Fe,Ni metal and carbonaceous material suggests that the original carbonaceous material may have formed by Fischer-Tropsch (FT) type reactions at low temperatures (less than 400 K), possibly in the solar nebula. This carbonaceous material probably consisted of a complex mixture of hydrocarbons, kerogen-like material, and other complex organic molecules. The aggregates were subsequently accreted onto the ordinary chondrite parent bodies and underwent planetary thermal processing which resulted in the catalytic graphitization of hydrocarbons, in the presence of Fe,Ni metal, to produce poorly graphitized carbon. None of the meteorites studied experienced temperatures sufficiently high to produce crystalline, ordered graphite. Using the empirical geothermometer of Rietmeijer and Mackinnon (1985), the measured d(002) spacings of poorly graphitized carbon show that graphitization occurred at temperatures between 300 and 450 C. This range of temperatures is significantly lower than the generally quoted metamorphic temperatures for type 3.4-3.6 ordinary chondrites (about 450-500 C).

Brearley, Adrian J.↗

Matrix mineralogy of the Lance CO3 carbonaceous chondrite - A transmission electron microscope study

Results are presented on electron microprobe analyses of three CO chondrites, all of which are falls: Lance, Kainsaz, and Warrenton. The TEM mineralogy results of Lance chondrite show that Fe-rich matrix olivines have been altered to Fe-bearing serpentine and Fe(3+) oxide; matrix metal was also altered to produce Fe(3+) oxides, leaving the residual metal enriched in Ni. Olivine grains in Lance's matrix contain channels along their 100-line and 001-line directions; the formation and convergence of such channels resulted in a grain-size reduction of the olivine. A study of Kainsaz and Warrenton showed that these meteorites do not contain phyllosilicates in their matrices, although both contain Fe(3+) oxide between olivine grains. It is suggested that, prior to its alteration, Lance probably resembled Kainsaz, an unaltered CO3 chondrite.

Keller, Lindsay P.↗

Mineralogical comparison of the Y86032-type lunar meteorites to feldspathic fragmental breccia 67016

Mineralogical characteristics of lunar meteorites Y82193 and Y86032 were compared to those of Apollo-16 fieldspathic fragmental breccia 67016, using results from electron microprobe analysis and TEM. It was found that the pyroxene mineralogy and chemistry of granulitic clasts in 67016 breccia and the Y86032-type lunar meteorites were much alike, suggesting that the formation processes of the fieldspathic fragmental breccias are also important in the genesis of lunar meteorites. There were differences in matrix microtextures, however, implying that 67016 and Y86032-type breccia formation temperatures were different.

Takeda, H.↗