Search NASA⌕ Search

SEARCH · Search NASA

Results for “α phase”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Impact of nano-scale cavities on hydrogen storage and retention in yttrium hydride

Here, in situ synchrotron high-energy x-ray diffraction experiments and detailed transmission electron microscopy (TEM) characterization were conducted on as-fabricated and neutron-irradiated yttrium hydrides. The high-resolution synchrotron x-ray diffraction revealed minor α yttrium and major δ yttrium hydride phases in all specimens. Specimens were subject to heat treatments (heating-cooling cycles), and the intensity of α yttrium partially and completely disappeared in as-fabricated and neutron-irradiated specimens, respectively. The disappearance of α yttrium was unforeseen because hydrogen was expected to leave δ phase, causing an increase in α yttrium diffraction peak intensity. This observation indicated a surplus of hydrogen in the specimens where it was odd for hydride-forming early transition metal elements. The subsequent through-focus TEM characterization discovered nanometric cavities in both as-fabricated and neutron-irradiated yttrium hydride specimens for the first time. Two types of cavities were identified as fabrication-caused and irradiation-induced. The fabrication-caused cavities were associated with regions having linear deformation features, interfaces, and inclusions. The irradiation-induced cavities were observed as being formed isolated in the yttrium hydride phase. The presence of such nanometric cavities was considered as potential hydrogen storage pockets where the overall hydrogen storing capacity of yttrium hydride would be enhanced.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Assessment of uranium nitride interatomic potentials

Uranium mononitride (UN) is a promising nuclear fuel due to its high fissile density, high thermal conductivity, and suitability for reprocessing. In this study, two uranium nitride interatomic potentials are assessed: Tseplyaev and Starikov's angular-dependent potential and Kocevski et al.'s embedded atom model potential. Predictions of the thermophysical and elastic properties of UN, UN 2 , and α- and β-U 2 N 3 computed using both potentials are assessed and compared to available experimental data. Notably, the Tseplyaev potential performs better with the energetic aspects of UN, e.g., specific heat capacity and point defect formation energies, whereas the Kocevski potential performs better with the structural aspects of UN, e.g., thermal expansion as well as with the elastic properties. The reasons why the Kocevski potential underestimates the UN specific heat are explained by examining the UN phonon properties modeled using both potentials. The Kocevski potential shows better identification of the mechanical stability ranges of UN, UN 2 , and α- and β-U 2 N 3 , reasonably predicting the melting point of UN and predicting stable structures for UN 2 and α- and β-U 2 N 3 . On the other hand, the Tseplyaev potential predicts a premature phase change of both UN and UN 2 and cannot stabilize α- nor β-U 2 N 3 . However, the Kocevski potential cannot predict a stable α-U phase and is thus not suitable for the calculation of formation energies for non-stoichiometric point defects.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Heterogeneous microstructure of yttrium hydride and its relation to mechanical properties

Here, the goal of this study is to investigate the properties of yttrium hydride materials in relation to the microstructure, especially its homogeneity. High-throughput nanoindentation mapping was used to evaluate hardness distribution. Raman spectral imaging demonstrated its sensitivity to the presence of YH2 and impurities. Raman peak position maps were correlated with residual stress in the specimens. Electron backscatter diffraction mapping provided phase distributions with correlation to high-energy X-ray diffraction analysis. The experimental mapping data were combined and analyzed using unsupervised machine learning cluster procedures. The machine learning analysis revealed that yttrium hydride specimens contained a major δ-YH2 – x phase component and minor α-Y and δ-YH2 – x components with significant residual stress. The minor phase fraction decreased with increasing nominal H/Y ratio, which affected the nanoindentation and Vickers hardness. The multimodal mapping procedures described herein affect developing important microstructure–property relationships, as well as correlations in heterogeneity and mechanical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Understanding Instability in Formamidinium Lead Halide Perovskites: Kinetics of Transformative Reactions at Grain and Subgrain Boundaries

Transformative and reconstructive reactions impart significant structural changes at particle boundaries of hybrid perovskites, which influence environmental stability and optoelectronic properties of these materials. Here, we investigate the moisture-induced transformative reactions in formamidinium based perovskites FAPbX 3 (X=I, Br) and show that the ambient stability of these materials can be adjusted from a few hours to several months. For FAPbI 3 , roles of water vapor, particle size, and light illumination on the kinetic pathways of the cubic (a) transformation to the hexagonal (d) phase are analyzed by X-ray diffraction, optical microscopy, photoluminescence and solid-state NMR spectroscopy techniques. The grain and sub-grain boundaries exhibit different α→δ-FAPbI 3 phase transformation kinetics. Our study suggests that the dynamic transformation involves the local water-induced dissolution of the cubic phase occurring at the crystal surfaces followed by precipitation of the hexagonal phase. Insights into structures and dynamics of a kinetically trapped α-|δ-FAPbI 3 are obtained by 1 H, 2 H, and 207 Pb ssNMR spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Nanocrystal Geometry Governs Phase Transformation Pathways in Palladium Hydride

Pathways and structural dynamics of phase transformations impact performance of materials in energy and information storage technologies. Palladium hydride (PdH x ) nanocrystals are an ideal model system for studying solute-induced phase transformations, where elastic energy from lattice mismatch between α-PdH x and β-PdH x phases is often considered a key to determining the transformation pathways. α/β-PdH x interfacial elastic energy is affected by the confined geometry of a nanocrystal. However, how nanocrystal geometry influences phase transformation pathways is largely unknown. Using in situ liquid phase transmission electron microscopy, we directly visualize hydrogenation in Pd nanocrystals with two geometries, a nanocube and a hexagonal nanoplate. Both follow similar sequences of an initially curved nucleus, interface flattening, and reverse-stage nucleation; however, their evolving α/β-PdH x interfaces exhibit geometry-dependent crystallographic alignments. In nanocubes, {100}-aligned configurations conform to static elastic energy ordering, representing a pathway that maintains a local mechanical equilibrium, whereas nanoplates display both {110}- and {211}-aligned interfaces. Theoretical simulations show that geometry determines the accessibility of alternative phase transformation pathways as the system is driven far from equilibrium during hydrogenation. In conclusion, these findings identify geometry as a fundamental parameter for directing phase transformation pathways, offering design principles for accessing atypical configurations and improving properties of intercalation-based devices.

Lee, Daewon [Lawrence Berkeley National Laboratory↗
DOE OSTI2023

Re-investigation of high-temperature phase equilibria in Fe-rich Sm–Fe–Ti alloys

Recently renewed attempts to develop high-performance rare-earth-lean permanent magnets based on the Sm(Fe,Ti) 12 compound have drawn attention to the limited knowledge about the high-temperature phase equilibria in the Sm–Fe–Ti system. Experimental investigation of equilibrated alloys with electron probe microanalysis, X-ray diffraction and thermomagnetic analysis revealed several inaccuracies in the currently accepted phase relations at 1000°C and allowed for a revision of the Fe-rich corner of the Sm–Fe–Ti phase diagram. The Sm(Fe,Ti) 12 and Sm 3 (Fe,Ti) 29 phases were found to have more extended Ti ranges of 5.1–9.7 at% and 2.8–6.9 at%, respectively. With increasing of the Ti content, the Curie temperature of the Sm(Fe,Ti) 12 remains nearly constant at 306–312°C, whereas that of the Sm 3 (Fe,Ti) 29 increases from 188°C to 207°C. The low-titanium Sm 3 (Fe,Ti) 29 phase equilibrates not only with the Sm(Fe,Ti) 12 and Sm2(Fe,Ti) 17 phases, but also with (α-Fe) solid solution. Newly demonstrated equilibrium between Sm 2 (Fe,Ti) 17 and TiFe 2 phases makes impossible the earlier reported equilibrium between the Sm 3 (Fe,Ti) 29 and Sm(Fe,Ti) 11 phases. Because of an invariant reaction at 1000 °C, the revised phase diagram also features a class II four-phase equilibrium Sm 3 (Fe,Ti) 29 + TiFe 2 + Sm(Fe,Ti) 12 + Sm 2 (Fe,Ti) 17 . Peritectic decomposition of the Sm(Fe,Ti) 11 phase, which occurs either at 1075°C or at 1087°C, was found to have among its products the Sm(Fe,Ti) 12 phase. Although no such equilibration was attempted, it must be possible to obtain above 1087°C a two-phase state composed of the Sm(Fe,Ti) 12 phase and a liquid – which is important for manufacturing of the Sm(Fe,Ti) 12 - based permanent magnets via the liquid-phase sintering.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Shock-driven amorphization and melting in Fe 2 O 3

We present measurements on Fe 2⁢ O 3 amorphization and melt under laser-driven shock compression up to 209(10) GPa via time-resolved in situ x-ray diffraction. At 122(3) GPa, a diffuse signal is observed indicating the presence of a noncrystalline phase. Structure factors have been extracted up to 182(6) GPa showing the presence of two well-defined peaks. A rapid change in the intensity ratio of the two peaks is identified between 145(12) and 151(12) GPa, indicative of a phase change. The noncrystalline diffuse scattering is consistent with shock amorphization of Fe 2 ⁢O 3 between 122(3) and 145(12) GPa, followed by an amorphous-to-liquid transition above 151(12) GPa. Upon release, a noncrystalline phase is observed alongside crystalline α–Fe 2⁢ O 3 . The extracted structure factor and pair distribution function of this release phase resemble those reported for Fe 2 ⁢O 3 melt at ambient pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Exploring 2D X-ray diffraction phase fraction analysis with convolutional neural networks: Insights from kinematic-diffraction simulations

Abstract Deep-learning models are effective for analyzing the complex information in 2D X-ray diffraction (XRD) patterns. Accurately collecting parameters of the material sample is crucial during model training, significantly impacting model performance. In this study, we employ a kinematic-diffraction simulator to generate simulated 2D XRD patterns for Ti–6Al–4V alloy, allowing precise control of sample parameters. These simulated patterns are used to train convolutional neural networks, predicting $$\upbeta$$ β -phase volume fractions. The training data set consists exclusively of 2D XRD patterns with pure $$\upalpha$$ α - or pure $$\upbeta$$ β -phase, while the testing set incorporates patterns with intermediate phase volume fraction. In particular, we investigate how the architectures of the model influence prediction reliability and computational performance. Experimental results reveal that, with appropriate training, the convolutional neural network accurately detects intermediate phase volume fractions even trained with only pure-phase patterns, achieving a mean square error accuracy of $$9.4 \times 10^{-4}$$ 9.4 × 10 - 4 . Graphical abstract

Yue, Weiqi↗
DOE OSTI2024

Tailoring Interface Energies via Phosphonic Acids to Grow and Stabilize Cubic FAPbI 3 Deposited by Thermal Evaporation

Coevaporation of formamidinium lead iodide (FAPbI 3 ) is a promising route for the fabrication of highly efficient and scalable optoelectronic devices, such as perovskite solar cells. However, it poses experimental challenges in achieving stoichiometric FAPbI 3 films with a cubic structure (α-FAPbI 3 ). In this work, we show that undesired hexagonal phases of both PbI 2 and FAPbI 3 form during thermal evaporation, including the well-known 2H-FAPbI 3 , which are detrimental for optoelectronic performance. We demonstrate the growth of α-FAPbI 3 at room temperature via thermal evaporation by depositing phosphonic acids (PAc) on substrates and subsequently coevaporating PbI 2 and formamidinium iodide. We use density-functional theory to develop a theoretical model to understand the relative growth energetics of the α and 2H phases of FAPbI 3 for different molecular interactions. Experiments and theory show that the presence of PAc molecules stabilizes the formation of α-FAPbI 3 in thin films when excess molecules are available to migrate during growth. This migration of molecules facilitates the continued presence of adsorbed organic precursors at the free surface throughout the evaporation, which lowers the growth energy of the α-FAPbI 3 phase. Our theoretical analyses of PAc molecule–molecule interactions show that ligands can form hydrogen bonding to reduce the migration rate of the molecules through the deposited film, limiting the effects on the crystal structure stabilization. Our results also show that the phase stabilization with molecules that migrate is long-lasting and resistant to moist air. These findings enable reliable formation and processing of α-FAPbI 3 films via vapor deposition.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A Coupled Small and Wide-Angle X-Ray Scattering Study of Phase Transformation Mechanisms in U-6Wt Pct Nb

The elevated temperature phase transformation kinetics of U-6wt%Nb in both wrought and cast conditions were investigated using in-situ high energy synchrotron X-ray scattering. The evolution of the phase content, γ-phase composition, and microstructure morphology was determined through the analysis of simultaneously collected wide-angle diffraction and small-angle scattering (SAXS) data. The results of the wide-angle scattering analysis, especially the phase fractions and average composition of the γ-phase, provide model parameters to enable a quantitative analysis using the SAXS data. Greater clarity regarding the kinetics of different precipitation mechanisms, namely the continuous precipitation (CP) of α-U within the γ-phase matrix and the discontinuous (DP) grain boundary precipitation of a lamellar microstructure, consisting of α-U and Nb-rich γ-phase are obtained from the coupled measurement modes. These results indicate that the CP mechanism is responsible for the initial precipitation of α-U at all temperatures considered. Near the nose in the time-temperature-transformation (TTT) diagram at ~798 K, both mechanisms are active during the early stages of phase transformation. However, the DP mechanism has an increasingly long incubation period with decreasing temperature below the TTT nose. In conclusion, the average interlamellar spacing obtained from the SAXS analysis increases with time, providing further evidence of the so-called divergent DP behavior previously observed in U-6wt%Nb alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Strengthening mechanisms, hardening/softening behavior, and microstructure evolution in an LPSO magnesium alloy at elevated temperatures

Here, rapid degradation of the mechanical properties of conventional Mg alloys with temperature precludes their wide application in industry. The LPSO (long period stacking ordered) Mg alloys, on the other hand, show considerable potential to achieve excellent high-temperature mechanical performance. In this study, a Mg-5.1Y-2.4Zn (wt.%) extrusion alloy with the microstructure comprising of α-Mg matrix and LPSO phase was prepared. It is shown that the yield strength of the alloy at 200 °C retained ~83% of the yield strength of 198 MPa at room temperature (RT). Importantly, the ductility also improved, owing to the increased non-basal slip activities at elevated temperatures. In contrast to RT and 200 °C, the alloy exhibited softening tensile behavior with an apparent loss of yield strength at 300 °C. In-situ lattice strain analysis revealed that load transfer from α-Mg to LPSO remains effective at temperatures up to 200 °C, governing the high yield strength of the alloy. The post-mortem analysis by means of electron microscopy confirmed that the LPSO phase is structurally stable at 200 °C. In particular, the high strain hardenability is rationalized by the sandwiched LPSO structures together with stacking faults serving as effective obstacles to the motion of non-basal dislocations. The load transfer effect disappears at the temperature of 300 °C, resulting in the fast deterioration of strength of the alloy. The cracking of the LPSO phase along with the recrystallizing of α-Mg grains were found to be the main causes for the softening behavior of the alloy at 300 °C.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The lattice parameter – composition relationship of the body centered cubic uranium-niobium alloys

In this paper, in-situ time-of-flight neutron diffraction experiments were performed on uranium-niobium alloy with 6 wt% Nb to study the lattice parameter-composition relationship for the body centered cubic (bcc) alloys. Based on lattice-parameter measurements of Nb-supersaturated γs phase over the range of 450 – 790 °C, an improved Vegard's-type relationship was established for determination of Nb concentrations at elevated temperatures. Neutron diffraction data were also collected as a function of aging time over the 450 - 600 °C range when γs phase decomposed isothermally into the mixture of orthorhombic α-U and Nb-rich bcc phase, as well as at room-temperature on the alloys aged ex-situ at 500 °C up to five years. From these measurements, the average Nb concentrations in the bcc phase were determined based on the Rietveld refinements of weight fraction and mass conservation relations (lever rule). Over the 15at% – 78at% range of Nb concentrations that correspond to different experimental aging times, the lattice parameters at constant temperatures exhibit a nonlinear S-shaped variation with Nb concentration, and the associated excess volumes of mixing can be described by a subregular solution model of the Redlich–Kister type of polynomial. Over the full range of composition the S-shaped deviation from Vegard's law can be modeled using a combination of an elastic continuum model and a perturbation to the radii of the solute atoms in the solvent, suggesting that electronic interactions between solute and solvent atoms could play an important role in the compositional dependence of lattice parameter for the γ-phase U-Nb alloys. While Vegard's law is a straightforward and reasonably good approximation for the bcc solid solutions in the U-Nb system, the Nb concentrations determined from the weight fraction refinements of diffraction data provide internally consistent, mass-conserving estimates of solute redistribution for the monotectoid reaction.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Multi-reward Reinforcement Learning Based Bond-Order Potential to Study Strain-Assisted Phase Transitions in Phosphorene

Here, we introduce a multi-reward reinforcement learning (RL) approach to train a flexible bond-order potential (BOP) for 2D phosphorene based on ab initio training data sets. Our approach is based on a continuous action space Monte Carlo tree search algorithm that is general and scalable and presents an efficient multiobjective optimization scheme for high-dimensional materials design problems. As a proof-of-concept, we deploy this scheme to parametrize multiple structural and dynamical properties of 2D phosphorene polymorphs. Our RL-trained BOP model adequately captures the structure, energetics, transformation barriers, equation of state, elastic constants, and phonon dispersions of various 2D P polymorphs. We use this model to probe the impact of temperature and strain rate on the phase transition from black (α-P) to blue phosphorene (β-P) through molecular dynamics simulations. A decrease in critical strain for this phase transition with increase in temperature is observed, and the underlying atomistic mechanisms are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Hydrogen and oxygen stable isotope composition of water in metaschoepite mineralization on U 3 O 8

When exposed to humidity in an oxidizing atmosphere hydrated uranium oxide grows as a secondary mineral on aged U 3 O 8 and may incorporate the oxygen stable isotope signature of the water vapor into the secondary uranium oxide, as well as hydrogen and oxygen stable isotopes into any mineral hydration water. Because geospatial variation in δ 2 H and δ 18 O values of atmospheric humidity and precipitation is well understood, the H and O stable isotope composition of mineral hydration waters can give information on the environment of mineral formation. We exposed powdered U 3 O 8 to humidity with known H and O stable isotope composition at constant 30%, 61% and 91% relative humidity. We sampled and analyzed the U 3 O 8 powders along with any secondary hydrated minerals that had formed on the particle surfaces at various intervals from 1 to 10 days throughout the 180-day humidity exposures. We present stable H and O isotope results of mineral hydration waters in uranium oxide materials analyzed by thermogravimetry-enabled isotope ratio infrared spectroscopy (TGA-IRIS), which uses precise heating by thermogravimetric analyzer to liberate water vapor for subsequent online isotope analysis via a laser-based isotope ratio infrared spectroscopy instrument (Picarro L-2130i). Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and x-ray diffraction (XRD) analysis of humidity-exposed U 3 O 8 heated to 350 °C indicates that the U 3 O 8 had a measurable metaschoepite ((UO 3 )•2H 2 O) phase along with α-U 3 O 8 . After heating to 350 °C, the metaschoepite is eliminated but the α-U 3 O 8 is retained, meaning that the heating successfully extracted the water in the metaschoepite but did not disturb the crystalline structure of the U 3 O 8 . Analysis of the bulk oxygen isotope composition by fluorination of these samples before and after heating, indicates that the oxygen isotope value of the U 3 O 8 is also not affected by heating to 350 °C. Precision for δ 2 H and δ 18 O values of metaschoepite mineral hydration water stable isotope values yielded by the TGA-IRIS method on metaschoepite are 5.86‰ for δ 2 H, and 0.34‰ for δ 18 O. Hydrogen in the various water reservoirs is highly exchangeable and thus the δ 2 H values of these waters is not easily interpreted. However, oxygen in the separate water reservoirs is much less exchangeable, and thus δ 18 O values of the metaschoepite mineral hydration water is likely to reflect that of the water vapor the sample was exposed to. Once metaschoepite is formed on the surface of U 3 O 8 particles, the oxygen isotope signature of the mineral hydration water in metaschoepite does not respond to changes in exposure vapor isotopic composition, and thus appears to be fairly durable in this regard. Furthermore, these results suggest that it may be possible to discern information about the provenance and history of an oxidized U 3 O 8 sample from oxygen stable isotope measurements of metaschoepite mineral hydration water.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2020

Microstructural evolution of a silicon carbide-carbon coated nanostructured ferritic alloy composite during in-situ Kr ion irradiation at 300°C 450°C

This work focuses on irradiation behaviors of a novel silicon carbide and carbon coated nanostructured ferritic alloy (SiC-C@NFA) composite for potential applications as a cladding and structural material for next generation nuclear reactors. The SiC-C@NFA samples were irradiated with 1 MeV Kr ions up to 10 dpa at 300 and 450 °C. Microstructures and defect evolution were studied in-situ at the IVEM-Tandem facility at Argonne National Laboratory. The effects of ion irradiation on various phases such as α-ferrite matrix, (Fe,Cr) 7 C 3 , and (Ti,W)C precipitates were evaluated. The α-ferrite matrix showed a continuous increase in dislocation density along with spatial ordering of dislocation loops (or loop strings) at >5 dpa. The size of the dislocation loops at 450 °C was larger than that at 300 °C. The nucleation and growth of new (Ti,W)C precipitates in α-ferrite grains were enhanced with the ion dose at 450 °C. This study provides new insight into the irradiation resistance of the SiC-C@NFA system.

(FeCr)(7)C-3↗
DOE OSTI2026

Structure of Layers Formed by [2-(3,6-Disubstituted-9 H -carbazol-9-yl)ethyl]phosphonic Acids on Metal Oxides

[2-(9 H -Carbazol-9-yl)ethyl]phosphonic acid (2PACz) and its derivatives are being used extensively as hole-transport layers in organic and perovskite solar cells due to their ability to modify electrode work function, surface wettability, and in some cases, to improve active-layer adhesion, while minimizing interfacial energy losses. The orientation and coverage of surface modifiers significantly impact these functional properties; however, the detailed structure and packing in these overlayers are challenging to investigate, leading to a lack of understanding of how this structure and packing influence performance and limiting the ability to rationally design molecular modifiers. Here, we investigate monolayers of 2-(9 H -carbazol-9-yl)ethyl phosphonic acid derivatives (from here on referred to as X-2PACz) on indium tin oxide (ITO) and alpha phase aluminum oxide (α-Al 2 O 3 ) using a combination of X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure (NEXAFS) spectroscopy, and X-ray reflectivity (XRR). By correlating elemental ratios, molecular orientation, and electron density profiles, we directly quantify surface coverage, layer thickness, and molecular tilt across a series of chemically related monolayers. We find that 2PACz and the X-2PACz derivatives form dense monolayers on α-Al 2 O 3 and ITO, with similar surface coverages on either substrate that are inversely proportional to molecular steric bulk. These surface coverage results indicate that X-2PACz is sterically limited in its monolayer surface packing density, as opposed to site limited. Despite surface packing density differences between molecules, the NEXAFS data show a constant average molecular orientation of 61° to 65° between the plane of the carbazole and the substrate for all the molecules on both substrates. These results increase our general understanding of 2PACz derivatives as they become increasingly useful in high performance solar cells.

NEXAFS↗
DOE OSTI2025

Strain Engineering: Reduction of Microstrain at the Perovskite Surface via Alkali Metal Chloride Treatment Enhances Stability

Degradation of halide perovskites under a humid atmosphere is the major challenge preventing widespread commercial deployment of this material class. Here it is shown that strain engineering via alkali metal chloride treatment at the FAPbI 3 /SnO 2 interface effectively improves moisture-related stability. CsCl and KCl treatments reduce microstrain at the perovskite surface and slow the α- to δ-phase transformation. Alkali metal treatments with LiCl, NaCl, and RbCl led to an increase in microstrain and faster degradation. The compressive strain at the perovskite surface was the smallest for CsCl and was linked to improved stability. First-principles density functional theory calculations confirm the preferential formation of alkali defects at interstitial positions at the perovskite surface. Particularly CsCl and KCl treatments lead to a release of compressive strain at the perovskite surface and local structural distortions that may favor passivation of surface defects. In contrast, the room-temperature dynamics of Li interstitials result in an overall expansion of lattice volume, which may be linked to more facile lattice degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Two-Phase Equation of State for Al 2 O 3

Two-phase equation of state (EOS) for AI 2 O 3 (alumina) is calibrated using the experimental/simulation calibration data uploaded to the caldata repository. The two phases are solid α-Al 2 O 3 (corundum, sapphire, ruby) and its melt. The enthalpy of formation is set to that available from the NIST-JANAF database at T = 0K, P =1 bar. The expected applicability range of the EOS is from the ambient conditions to temperatures of ~ 5000 K and pressures of ~ 50-100 GPa.

36 MATERIALS SCIENCE↗