Search NASA⌕ Search

SEARCH · Search NASA

Results for “3D Reconstruction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Probing Fundamental Mechanisms of Plastic Deformation with High Energy X-rays (Final Progress Report)

Overall, substantial progress was made on developing BCDI techniques in the direction of imaging defects in multi-crystal samples. Section 2.1 describes a new method to reconstruct the 3D atomic displacement field within a grain from multiple coherently resolved diffraction peaks. The key development is the ability to recover a best fit to the grain shape at the same time as the internal displacement (strain) variation with no prior knowledge of the microstructure. This is complemented by the development of a method, Sec. 2.2, to separate out sets of Laue reflections that belong to a single grain (and thus be able to index its orientation) in the commonly encountered situation in which the beam illuminates several grains in a given location. This is essential for enabling collection of coherent diffraction data (at APS 34-ID-C) from neighboring grains. All experiments depend on the quality of samples used. Although good progress has been made with thin film samples, we are working with a broader range of geometries. A new sample design uses a high-Z metal (e.g., Pt) deposited in a sub-micron trench in a low-Z metal (e.g., Al) so that the grain size is prevented from exceeding the current limit for BCDI. We also report in section 3.1 on successfully applying NF-HEDM to a fine-grain Mg sample that would normally be considered out of scope for the method. This represents progress towards being able to map out polycrystalline samples in 3D before performing BCDI on individual grains. We further report in section 3.2 on preliminary NF-HEDM characterization of a sample of UO2 that has sub-micron grains; the data imply the capability of mapping fine-grain polycrystals at 1-ID-E, again for the purposes of BCDI in the bulk. Lastly, our plan is to load grains in polycrystalline samples by inducing thermal stress. We also report the experimental measurements of the Ti- 6Al-4V alloy obtained at the European Synchrotron Radiation Facility (ESRF), which had been indexed and mapped via HEDM at APS in section 9. As discussed below, however, technique development pre-occupied the team throughout the project which meant that we did not make any significant progress towards answering the original hypotheses as stated in the proposal. In summary, we assert that we have made good progress in methods and samples and future work taking advantage of this progress is likely to obtain and analyze BCDI data from multiple adjacent grains in 3D polycrystals. Obtaining such data depends on re-gaining access to the Advanced Photon Source, which is anticipated in late summer or the Fall. In all cases, work has involved close collaboration with faculty, staff, postdocs and students from Brigham Young University (BYU), the Los Alamos National Laboratory and APS beamlines 1-ID and 34-ID.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Materials Signatures of Metallic Phases (Final Report)

This report summarizes key accomplishments from a 2 year Laboratory Directed Research and Development (LDRD) project focused on advancing nanoscale characterization of metallic particulates and synthesis of laboratory-scale analogs. We successfully developed and refined nanoscale crystallography techniques with significantly improved spatial resolution and throughput compared to traditional transmission electron microscopy. We also established nanotomography capabilities for 3D particle reconstruction and began optimizing throughput for broader application. Additionally, we demonstrated the ability to relocate and characterize individual particles using atomic force microscopy (AFM), providing insights into hardness, conductivity, and magnetic behavior. On the synthesis front, we leveraged controlled and combustion-based methods to investigate annealing effects and rapid oxidation behavior of U–Fe–Ni compounds. These efforts collectively enhance our ability to characterize and interpret particulate formation and transformation under relevant conditions.

36 MATERIALS SCIENCE↗
NASA NTRS1990

Hierarchical approach to reconstruct surfaces by using iteratively rectified imagery

A new approach to reconstruct the 3D surface of the object space from digital images is described. All the object points obtained by an automatic orientation procedure lead to a first approximation of the surface. Edges are computed for one image and matched to the other image by grey level correlation or least-squares matching through the scale space. To every discrete step in the scale space there exists the digital stereopair (image pyramid), the corresponding surface digital elevation model (DEM), and the warped images. The warped images in this discrete scale space representation correspond to digital orthophotos obtained from the DEMs that result from matching the image pyramid. The warped images will be used on every successive level in the image pyramid in order to reduce the foreshortening problems associated with any area-based matching method.

Schenk, Toni↗
NASA NTRS1999

The Effect of Spaceflight on Bone Cell Cultures

Understanding the response of bone to mechanical loading (unloading) is extremely important in defining the means of adaptation of the body to a variety of environmental conditions such as during heightened physical activity or in extended explorations of space or the sea floor. The mechanisms of the adaptive response of bone are not well defined, but undoubtedly they involve changes occurring at the cellular level of bone structure. This proposal has intended to examine the hypothesis that the loading (unloading) response of bone is mediated by specific cells through modifications of their activity cytoskeletal elements, and/or elaboration of their extracellular matrices. For this purpose, this laboratory has utilized the results of a number of previous studies defining molecular biological, biochemical, morphological, and ultrastructural events of the reproducible mineralization of a primary bone cell (osteoblast) culture system under normal loading (1G gravity level). These data and the culture system then were examined following the use of the cultures in two NASA shuttle flights, STS-59 and STS-63. The cells collected from each of the flights were compared to respective synchronous ground (1G) control cells examined as the flight samples were simultaneously analyzed and to other control cells maintained at 1G until the time of shuttle launch, at which point they were terminated and studied (defined as basal cells). Each of the cell cultures was assayed in terms of metabolic markers- gene expression; synthesis and secretion of collagen and non-collagenous proteins, including certain cytoskeletal components; assembly of collagen into macrostructural arrays- formation of mineral; and interaction of collagen and mineral crystals during calcification of the cultures. The work has utilized a combination of biochemical techniques (radiolabeling, electrophoresis, fluorography, Western and Northern Blotting, and light microscopic immunofluorescence) and structural methods (conventional and high voltage electron microscopy, inununocytochemistry, stereomicroscopy, and 3D image reconstruction). The studies have provided new knowledge of aspects of bone cell development and structural regulation, extracellular matrix assembly, and mineralization during spaceflight and under normal gravity. The information has contributed to insights into the means in general by which cells respond and adapt to different conditions of gravity (loading). The data may as well have suggested an underlying basis for the observed loss of bone by vertebrates, including man, in microgravity; and these scientific results may have implications for understanding bone loss following fracture healing and extended periods of inactivity such as during long-term bedrest.

Landis, William J.↗
NASA NTRS1999

Autonomous Image Analysis for Future Mars Missions

To explore high priority landing sites and to prepare for eventual human exploration, future Mars missions will involve rovers capable of traversing tens of kilometers. However, the current process by which scientists interact with a rover does not scale to such distances. Specifically, numerous command cycles are required to complete even simple tasks, such as, pointing the spectrometer at a variety of nearby rocks. In addition, the time required by scientists to interpret image data before new commands can be given and the limited amount of data that can be downlinked during a given command cycle constrain rover mobility and achievement of science goals. Experience with rover tests on Earth supports these concerns. As a result, traverses to science sites as identified in orbital images would require numerous science command cycles over a period of many weeks, months or even years, perhaps exceeding rover design life and other constraints. Autonomous onboard science analysis can address these problems in two ways. First, it will allow the rover to preferentially transmit "interesting" images, defined as those likely to have higher science content. Second, the rover will be able to anticipate future commands. For example, a rover might autonomously acquire and return spectra of "interesting" rocks along with a high-resolution image of those rocks in addition to returning the context images in which they were detected. Such approaches, coupled with appropriate navigational software, help to address both the data volume and command cycle bottlenecks that limit both rover mobility and science yield. We are developing fast, autonomous algorithms to enable such intelligent on-board decision making by spacecraft. Autonomous algorithms developed to date have the ability to identify rocks and layers in a scene, locate the horizon, and compress multi-spectral image data. We are currently investigating the possibility of reconstructing a 3D surface from a sequence of images acquired by a robotic arm camera. This would then allow the return of a single completely in focus image constructed only from those portions of individual images that lie within the camera's depth of field. Output from these algorithms could be used to autonomously obtain rock spectra, determine which images should be transmitted to the ground, or to aid in image compression. We will discuss these algorithms and their performance during a recent rover field test.

Gulick, V. C.↗
NASA NTRS1999

An overview of vertebrate mineralization with emphasis on collagen-mineral interaction

The nucleation, growth, and development of mineral crystals through their interaction principally with collagen in normal bone and calcifying tendon have been elaborated by applying a number of different techniques for analysis of the inorganic and organic constituents of these tissues. The methods have included conventional and high voltage electron microscopy, electron diffraction, microscopic tomography and 3D image reconstruction, and atomic force microscopy. This summary presents results of these studies that have now characterized the size, shape, and aspects of the chemical nature of the crystals as well as their orientation, alignment, location, and distribution with respect to collagen. These data have provided the means for understanding more completely the formation and strength of the collagen-mineral composite present in most vertebrate calcifying tissues and, from that information, a basis for the adaptation of such tissues under mechanical constraints. In the context of the latter point, other data are given showing effects on collagen in bone cell cultures subjected to the unloading parameters of spaceflight. Implications of these results may be particularly relevant to explaining loss of bone by humans and other vertebrate animals during missions in space, during situations of extended fracture healing, long-term bedrest, physical immobilization, and related conditions. In a broader sense, the data speak to the response of bone and mineralized vertebrate tissues to changes in gravitational loading and applied mechanical forces in general.

Non-NASA Center↗
NASA NTRS2007

Quantifiable Assessment of SWNT Dispersion in Polymer Composites

NASA LaRC has established a new protocol for visualizing the nanomaterials in structural polymer matrix resins. Using this new technique and reconstructing the 3D distribution of the nanomaterials allows us to compare this distribution against a theoretically perfect distribution. Additional tertiary structural information can now be obtained and quantified with the electron tomography studies. These tools will be necessary to establish the structural-functional relationships between the nano and the bulk. This will also help define the critical length scales needed for functional properties. Field ready tool development and calibration can begin by using these same samples and comparing the response. i.e. gold standards of good and bad dispersion.

Park, Cheol↗
NASA NTRS2016

Coronal Polarization of Pseudostreamers and the Solar Polar Field Reversal

The reversal of the solar polar magnetic field is notoriously hard to pin down due to the extreme viewing angle of the pole. In Cycle 24, the southern polar field reversal can be pinpointed with high accuracy due to a large-scale pseudostreamer that formed over the pole and persisted for approximately a year. We tracked the size and shape of this structure with multiple observations and analysis techniques including PROBA2/SWAP EUV images, AIA EUV images, CoMP polarization data, and 3D tomographic reconstructions. We find that the heliospheric field reversed polarity in February 2014, whereas in the photosphere, the last vestiges of the previous polar field polarity remained until March 2015. We present here the evolution of the structure and describe its identification in the Fe XII 1074nm coronal emission line, sensitive to the Hanle effect in the corona.

magnetic field↗
NASA NTRS2019

PERISCOPE: PERIapsis Subsurface Cave OPtical Explorer

In this NIAC report we present a new technique enabling a practical option for mapping these structures at a relatively low cost: Photon Time-of-Flight (PTOF) imaging. Consider a scene with a surface that is in a camera's line of sight, with unknown geometry beyond the line of sight. PTOF works by directing laser pulses onto the visible surface and detecting the returned light after it reflects off the visible surface, onto the hidden surfaces, and back to the detector. An algorithm then reconstructs a 3d model of the hidden surface. The information gained has a wide variety of applications across NASA, the scientific community, the burgeoning commercial space industry, and in commercial and industrial use here on Earth.

Exploration↗
NASA NTRS2019

Macro-Scale Findings of the DebriSat Debris Field Obtained from X-Rays of the Catch Panels

The DebriSat project analyzes the debris from a hypervelocity impact test conducted on a 56 kg-simulated satellite target in 2014. Its purpose is to generate a comprehensive database of the size, mass, material, shape, and the radar and optical properties of fragments generated from orbital collisions of modern-built spacecraft. Three hundred ninety-one foam catch panels from the DebriSat test have been X-rayed to locate the particles within them for subsequent extraction and assessment. The data from the tens of thousands of extracted particles has heretofore been the focus of the debris assessment. The work presented here connects the X-ray sample location images to reconstruct the 3D distribution of the entire fragment cloud. Although some errors are inherent to the process, this 3D database is valuable for qualitative studies of size and energy distributions. Further, the 3D database can indicate the extent of bending or breaking of the fragments as they decelerated to full capture. By virtue of its full sphere perspective, the 3D database allows graphical insight to the physics of the collision and breakup. This 3D representation has been developed as a “point and click” graphical interface to retrieve the full data set on individual recovered and assessed fragments within the growing database. Overall, this macro-level screening technique has added enormous insight to the experiment in unexpected ways.

Allen, Anthony↗
NASA NTRSDate not supplied

Expanding NeMO-Net Machine Learning Capabilities for Citizen Science

NASA NeMO-Net, the neural multi-modal observation and training network for global coral reef assessment, is an open-source deep convolutional neural network and interactive active learning training software aiming to accurately assess the present and past dynamics of coral reef ecosystems through determination of percent living cover and morphology as well as mapping of spatial distribution. We present an interactive citizen science video game, released this April, for desktop and iOS devices where users interactively label morphology classifications over mm-scale 3D coral reef imagery captured using diver photomosaic imagery, the UAV enabled NASA FluidCam instrument, and satellite datasets. To date, the application has had over 40,000 downloads and over 60,000 unique coral reef classifications, each filtered through a user-based rating and expert evaluation system. We also present results from NeMO-Net’s convolutional neural network (CNN) models used to semantically segment 2D satellite imagery as well as projections of 3D coral reconstructions using user input data as training datasets. Fusing datasets using machine learning from multiple remote sensing platforms presents novel methodologies for assessing the health of coral ecosystems, which are critically endangered by a changing climate. In partnering with Mission Blue, the National Oceanic and Atmospheric Administration (NOAA), and the Living Oceans Foundation (LOF), NeMO-Net leverages an international consortium of subject matter experts to provide both proper training for citizen scientists and the generation of a labeled datasets to ingest into machine learning algorithms for global coral reef identification.

NeMO-Net↗
NASA NTRSDate not supplied

Expanding NeMO-Net Machine Learning Capabilities for Citizen Science

NASA NeMO-Net, the neural multi-modal observation and training network for global coral reef assessment, is an open-source deep convolutional neural network and interactive active learning training software aiming to accurately assess the present and past dynamics of coral reef ecosystems through determination of percent living cover and morphology as well as mapping of spatial distribution. We present an interactive citizen science video game, released this April, for desktop and iOS devices where users interactively label morphology classifications over mm-scale 3D coral reef imagery captured using diver photomosaic imagery, the UAV enabled NASA FluidCam instrument, and satellite datasets. To date, the application has had over 40,000 downloads and over60,000 unique coral reef classifications, each filtered through a user-based rating and expert evaluation system. We also present results from NeMO-Net’s convolutional neural network (CNN) models used to semantically segment 2D satellite imagery as well as projections of 3D coral reconstructions using user input data as training datasets. Fusing datasets using machine learning from multiple remote sensing platforms presents novel methodologies for assessing the health of coral ecosystems, which are critically endangered by a changing climate. In partnering with Mission Blue, the National Oceanic and Atmospheric Administration (NOAA), and the Living Oceans Foundation (LOF), NeMO-Net leverages an international consortium of subject matter experts to provide both proper training for citizen scientists and the generation of a labeled datasets to ingest into machine learning algorithms for global coral reef identification.

NeMO-Net↗
NASA NTRS2020

Optical Navigation for Autonomous Approach of Small Unknown Bodies

State of the practice in navigation around small celestial bodies heavily relies on ground sup- port and human skill, in particular, for perception-based operations such as optical navigation and mapping. This leads to longer duration and more complex mission operations and sub- sequently higher cost. Furthermore, it imposes limitations for certain missions such as fast fly-bys or multi-agent operations. In this work, we present an autonomous navigation strat- egy suitable for approaching small unexplored bodies. During the approach, we estimate the body’s physical properties as well as the spacecraft’s relative trajectory and associated un- certainties. The autonomous navigation strategy, which is solely based on optical measure- ments, begins as soon as the body becomes resolved in the navigation camera and terminates at the start of proximity operations, when the spacecraft makes its first trajectory correction to stay in the vicinity of the body. Our strategy uses multiple image-processing algorithms: light-curve analysis for estimating the target body’s rotation rate, Shape-from-Silhouette for reconstructing the 3D shape and estimating its rotation pole, and feature tracking tailored to Small-Body images for estimating relative navigation parameters. We used the Mission Analysis, Operations, and Navigation Toolkit Environment (MONTE) developed by the Jet Propulsion Laboratory to evaluate the feasibility of this multi-phase navigation strategy using simulated images of an approach trajectory. We used the Rosetta mission data to generate photorealistic images to characterise the performance of this approach. This work is based on the assumptions that the spacecraft attitude is known, the body is a principal-axis rotator, a-priori estimates of ephemerides and scale are available, and the body is observed from a zero sun phase only during initial approach. Preliminary results show orbit determination performance that is on par with the human navigation from the Rosetta mission; albeit with a 1% bias in spacecraft-target radial distance estimate. The bias error is likely due to the robustness and accuracy of the visual tracking under dynamic lighting conditions and per- spective changes, which decrease accuracy.

Villa, Jacopo↗
NASA NTRS2024

Unveiling the Journey of A Highly Inclined CME: Insights from the March 13, 2012, Event With 110° Longitudinal Separation

Context. A fast (∼2000 km s -1 ) and wide (>110°) coronal mass ejection (CME) erupted from the Sun on March 13, 2012. Its interplanetary counterpart was detected in situ two days later by STEREO-A and near-Earth spacecraft, such as ACE, Wind, and Cluster. We suggest that at 1 au the CME extended at least 110° in longitude, with Earth crossing its east flank and STEREO-A crossing its- west flank. Despite their separation, measurements from both positions showed very similar in situ CME signatures. The solar source region where the CME erupted was surrounded by three coronal holes (CHs). Their locations with respect to the CME launch site were east (negative polarity), southwest (positive polarity) and west (positive polarity). The solar magnetic field polarity of the area covered by each CH matches that observed at 1 au in situ. Suprathermal electrons at each location showed mixed signatures with only some intervals presenting clear counter streaming flows as the CME transits both locations. The strahl population coming from the shortest magnetic connection of the structure to the Sun showed more intensity. Aims. The aim of this work is to understand the propagation and evolution of the CME and its interaction with the surrounding CHs, to explain the similarities and differences between the observations at each spacecraft, and report what one of the most longitudinal expanded CME structures measured in situ would be. Methods. Known properties of the large-scale structures from a variety of catalogues and previous studies were used to have a better overview of this particular event. In addition, multipoint observations were used to reconstruct the 3D geometry of the CME and determine the context of the solar and heliospheric conditions before the CME eruption and during its propagation. The graduated cylindrical shell model (GCS) was used to reproduce the orientation, size and speed of the structure with a simple geometry. Also, the Drag-Based Model (DBM) was utilised to understand the conditions of the interplanetary medium better in terms of the drag undergone by the structure while propagating in different directions. Finally, a comparative analysis of the different regions of the structure through the different observatories was carried out in order to directly compare the in situ plasma and magnetic field properties at each location. Results. The study presents important findings regarding the in situ measured CME on March 15, 2012, detected at a longitudinal separation of 110° in the ecliptic plane despite its initial inclination being around 45° when erupted (March 13). This suggests that the CME may have deformed and/or rotated, allowing it to be observed near its legs with spacecraft at a separation angle greater than 100°. The CME structure interacted with high-speed streams generated by the surrounding CHs. The piled-up plasma in the sheath region exhibited an unexpected correlation in magnetic field strength despite the large separation in longitude. In situ observations reveal that at both locations there was a flank encounter – where the spacecraft crossed the first part of the CME – then encountered ambient solar wind, and finally passed near the legs of the structure. Conclusions. A scenario covering all evidence is proposed for both locations with a general view of the whole structure and solar wind conditions. Also, the study shows the necessity of having multipoint observations of large-scale structures in the heliosphere.

methods: data analysis↗