Search NASA⌕ Search

SEARCH · Search NASA

Results for “ANALYZER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

A framework for inferring and analyzing pharmacotherapy treatment patterns

Background: To discover pharmacotherapy prescription patterns and their statistical associations with outcomes through a clinical pathway inference framework applied to real-world data. Methods: We apply machine learning steps in our framework using a 2006 to 2020 cohort of veterans with major depressive disorder (MDD). Outpatient antidepressant pharmacy fills, dispensed inpatient antidepressant medications, emergency department visits, self-harm, and all-cause mortality data were extracted from the Department of Veterans Affairs Corporate Data Warehouse. Results: Our MDD cohort consisted of 252,179 individuals. During the study period there were 98,417 emergency department visits, 1,016 cases of self-harm, and 1,507 deaths from all causes. The top ten prescription patterns accounted for 69.3% of the data for individuals starting antidepressants at the fluoxetine equivalent of 20-39 mg. Additionally, we found associations between outcomes and dosage change. Conclusions: For 252,179 Veterans who served in Iraq and Afghanistan with subsequent MDD noted in their electronic medical records, we documented and described the major pharmacotherapy prescription patterns implemented by Veterans Health Administration providers. Ten patterns accounted for almost 70% of the data. Associations between antidepressant usage and outcomes in observational data may be confounded. The low numbers of adverse events, especially those associated with all-cause mortality, make our calculations imprecise. Furthermore, our outcomes are also indications for both disease and treatment. Despite these limitations, we demonstrate the usefulness of our framework in providing operational insight into clinical practice, and our results underscore the need for increased monitoring during critical points of treatment.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2019

Redefining Eligibility by Analyzing Canceled Intraoperative Radiotherapy as a Boost for Patients Undergoing Breast-Conserving Treatment

Background: Intraoperative radiotherapy (IORT) with a 50-kV x-ray is used for a tumor bed boost during breast-conserving surgery. This study evaluated the anatomicosurgical factors associated with cancellation of planned IORT. Methods: Patient eligibility for the study included age of 20 years or older, compatibility for lumpectomy, and ductal carcinoma in situ or stages 1–3 invasive carcinoma. All the patients underwent magnetic resonance imaging (MRI) and multidisciplinary team evaluations. Resection margins were assessed by frozen pathology. Pre- and intraoperative variables were compared between the IORT and IORT-cancellation groups. Results: A total of 434 patients underwent surgeries for IORT between August 2014 and December 2017. For 90 of these patients, IORT was canceled because of repeated positive margins leading to a large cavity or total mastectomy (n = 27), insufficient cavity-skin distance (n = 14), satellite lesions leading to a large cavity or total mastectomy (n = 12), MRI findings of a large primary tumor or uncertain margins leading to a large cavity (n = 6), cavity geometry unsuitable for IORT (n = 6), subareolar tumor extension (n = 6), tumor abutting the pectoralis muscle (n = 3), patient refusal (n = 5), intraoperative confirmation of bilateral breast cancer (n = 3) or benign pathology (n = 3), device malfunction (n = 3), or scheduling difficulty (n = 2). A tumor larger than 2 cm (P = 0.014) and the presence of satellite lesions (P = 0.014) were independent predictors of IORT cancellation. Conclusions: Surgical procedures resulting in large cavities were the leading cause of IORT cancellation. Multidisciplinary evaluations using MRI were critical for completion of IORT procedures.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2021

SMC 2021 : Analyzing Resource Utilization and User Behavior on Titan Supercomputer

Resource utilization statistics of submitted jobs on a supercomputer can help us understand how users from various scientific domains use HPC platforms and better design a job scheduler. We explore to generate insight regarding workload distribution and usage pattern domains from job scheduler trace, GPU failure information, and project-specific information collected from Titan supercomputer. Furthermore, we want to know how the scheduler performance varies over time and how the users' scheduling behavior changes following a system failure. These observations have the potential to provide valuable insight, which is helpful to prepare for system failures. These practices will help us develop and apply novel machine learning algorithms in understanding system behavior, requirement, and better scheduling of HPC systems. There are two datasets, RUR and GPU. RUR: This dataset is the job scheduler traces collected from the Titan supercomputerfrom 01/01/2015 to 07/31/2019 (2015.csv - 2019.csv). These were collected usingResource Utilization Report (RUR), a Cray-developed resource-usage data collectionand reporting system. It contains the usage information of its critical resources (CPU,Memory, GPU, and I/O) of each running job on Titan during that period [2]. ProjectAreas: Every job is associated with a project ID. TheProjectAreas.csvdatasetprovides a mapping of the project ID to its domain science. GPU: There have been some hardware-related issues in the GPUs in Titan that caused some GPUs to fail, sometimes irrecoverably during some job runs. This dataset provides information regarding these failures during the execution of the submitted jobs. GPUs on Titan are uniquely identified by a serial number (SN), and they are installed in a location. A GPU can be installed in a location, then removed from that location following a failure, and then re-installed in a different location after fixing the problem. If the failure can't be recovered, the GPU might be removed entirely from Titan. There are two prominent types of failures that resulted in the removal of GPUs from Titan: Double Bit Error (DBE) and Out of the Bus (OTB). The dataset (gc_full.csv) has the following fields: 1. SN : Serial number of a GPU 2. location : The location where it is installed 3. insert : The time when it was inserted into that location 4. remove : The time when it was removed from that location 5. duration : Amount of time the GPU spent in this location 6. out : If the device was taken out entirely w/o a re-installment into a new location. 7. event : If the GPU was taken out entirely, the reason for its removal. To learn more about this dataset, please refer to the git repositoryhttps://github.com/olcf/TitanGPULifeand the related publication [1]. References [1] George Ostrouchov, Don Maxwell, Rizwan A Ashraf, Christian Engelmann, MallikarjunShankar, and James H Rogers. Gpu lifetimes on titan supercomputer: Survival analysisand reliability. InSC20: International Conference for High Performance Computing,Networking, Storage and Analysis, pages 1-14. IEEE, 2020. [2] Feiyi Wang, Sarp Oral, Satyabrata Sen, and Neena Imam. Learning from five-yearresource-utilization data of titan system. In2019 IEEE International Conference onCluster Computing (CLUSTER), pages 1-6. IEEE, 2019.

42 ENGINEERING↗
DOE OSTI2021

SMC 2021 Data Challenge: Analyzing Resource Utilization and User Behavior on Titan Supercomputer

Resource utilization statistics of submitted jobs on a supercomputer can help us understand how users from various scientific domains use HPC platforms and better design a job scheduler. We explore to generate insight regarding workload distribution and usage pattern domains from job scheduler trace, GPU failure information, and project-specific information collected from Titan supercomputer. Furthermore, we want to know how the scheduler performance varies over time and how the users' scheduling behavior changes following a system failure. These observations have the potential to provide valuable insight, which is helpful to prepare for system failures. These practices will help us develop and apply novel machine learning algorithms in understanding system behavior, requirement, and better scheduling of HPC systems. There are two datasets, RUR and GPU: RUR dataset is the job scheduler traces collected from the Titan supercomputer from 01/01/2015 to 07/31/2019 (2015.csv - 2019.csv). These were collected using resource Utilization Report (RUR), a Cray-developed resource-usage data collection and reporting system. It contains the usage information of its critical resources (CPU, Memory, GPU, and I/O) of each running job on Titan during that period (https://ieeexplore.ieee.org/abstract/document/8891001). It includes ProjectAreas as additional information, every job is associated with a project ID. TheProjectAreas.csv dataset provides a mapping of the project ID to its domain science. GPU dataset has information regarding GPU failure on Titan. There have been some hardware-related issues in the GPUs in Titan that caused some GPUs to fail, sometimes irrecoverably during some job runs. This dataset provides information regarding these failures during the execution of the submitted jobs. GPUs on Titan are uniquely identified by a serial number (SN), and they are installed in a location. A GPU can be installed in a location, then removed from that location following a failure, and then re-installed in a different location after fixing the problem. If the failure can't be recovered, the GPU might be removed entirely from Titan. There are two prominent types of failures that resulted in the removal of GPUs from Titan: Double Bit Error (DBE) and Out of the Bus (OTB). The dataset (gc_full.csv) has seven attributes, we provided a short description of these attributes in the ReadMe file. To learn more about this dataset, please refer to the git repository https://github.com/olcf/TitanGPULife and the related publication (https://ieeexplore.ieee.org/abstract/document/9355319).

42 ENGINEERING↗
DOE OSTI2024

Multiscale modeling of HBV infection integrating intra- and intercellular viral propagation to analyze extracellular viral markers

Chronic infection with hepatitis B virus (HBV) is caused by the persistence of closed circular DNA (cccDNA) in the nucleus of infected hepatocytes. Despite available therapeutic anti-HBV agents, eliminating the cccDNA remains challenging. Thus, quantifying and understanding the dynamics of cccDNA are essential for developing effective treatment strategies and new drugs. However, such study requires repeated liver biopsy to measure the intrahepatic cccDNA, which is basically not accepted because liver biopsy is potentially morbid and not common during hepatitis B treatment. We here aimed to develop a noninvasive method for quantifying cccDNA in the liver using surrogate markers in peripheral blood. We constructed a multiscale mathematical model that explicitly incorporates both intracellular and intercellular HBV infection processes. The model, based on age-structured partial differential equations, integrates experimental data from in vitro and in vivo investigations. By applying this model, we roughly predicted the amount and dynamics of intrahepatic cccDNA within a certain range using specific viral markers in serum samples, including HBV DNA, HBsAg, HBeAg, and HBcrAg. Our study represents a significant step towards advancing the understanding of chronic HBV infection. The noninvasive quantification of cccDNA using our proposed method holds promise for improving clinical analyses and treatment strategies. By comprehensively describing the interactions of all components involved in HBV infection, our multiscale mathematical model provides a valuable framework for further research and the development of targeted interventions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Using mixed methods to construct and analyze a participatory agent-based model of a complex Zimbabwean agro-pastoral system

Complex social-ecological systems can be difficult to study and manage. Simulation models can facilitate exploration of system behavior under novel conditions, and participatory modeling can involve stakeholders in developing appropriate management processes. Participatory modeling already typically involves qualitative structural validation of models with stakeholders, but with increased data and more sophisticated models, quantitative behavioral validation may be possible as well. In this study, we created a novel agent-basedmodel applied to a specific context: Zimbabwean non-governmental organization the Muonde Trust has been collecting data on their agro-pastoral system for the last 35 years and had concerns about land-use planning and the effectiveness of management interventions in the face of climate change. We collaboratively created an agent-based model of their system using their data archive, qualitatively calibrating it to the observed behavior of the real system without tuning any parameters to match specific quantitative outputs. We then behaviorally validated the model using quantitative community-based data and conducted a sensitivity analysis to determine the relative impact of underlying parameter assumptions, Indigenous management interventions, and different rainfall variation scenarios. We found that our process resulted in a model which was successfully structurally validated and sufficiently realistic to be useful for Muonde researchers as a discussion tool. The model was inconsistently behaviorally validated, however, with some model variables matching field data better than others. We observed increased model system instability due to increasing variability in underlying drivers (rainfall), and also due to management interventions that broke feedbacks between the components of the system. Interventions that smoothed year-to-year variation rather than exaggerating it tended to improve sustainability. The Muonde trust has used the model to successfully advocate to local leaders for changes in land-use planning policy that will increase the sustainability of their system.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Analyzing the 2019 Chilean social outbreak: Modelling Latin American economies

In this work, we propose a quantitative model for the 2019 Chilean protests. We utilize public data for the consumer price index, the gross domestic product, and the employee and per capita income distributions as inputs for a nonlinear diffusion-reaction equation, the solutions to which provide an in-depth analysis of the population dynamics. Specifically, the per capita income distribution stands out as a solution to the extended Fisher-Kolmogorov equation. According to our results, the concavity of employee income distribution is a decisive input parameter and, in contrast to the distributions typically observed for Chile and other countries in Latin America, should ideally be non-negative. Based on the results of our model, we advocate for the implementation of social policies designed to stimulate social mobility by broadening the distribution of higher salaries.

Curilef, Sergio (ORCID:0000000283183206)↗
DOE OSTI2026

Data and scripts associated with a manuscript analyzing ELM-FATES parameter sensitivity under pre-fire and postfire scenarios using machine learning

NOTE: The manuscript associated with this data package is currently in review. The data may be revised based on reviewer feedback. Upon manuscript acceptance, this data package will be updated with the final dataset and additional metadata. This data package is associated with the manuscript “Fire Severity-Dependent Shifts in Vegetation Parameter Sensitivity: A Pre- and Post-Fire Analysis Using ELM-FATES and Explainable AI” submitted to Journal of Advances in Modeling Earth Systems (Zahura et al. 2026). The study examines vegetation physiological parameters controlling pre-fire and post-fire vegetation dynamics. To support this analysis, 73 vegetation parameters in Functionally Assembled Terrestrial Ecosystem Simulator (FATES) (Fisher et al., 2018) , which is coupled with E3SM (Energy Exascale Earth System Model) land model (ELM, ELM-FATES), were perturbed using a Sobol sequence to generate 1,024 ensemble members for two plant functional types: needleleaf evergreen extratropical trees (NEET) and C3 grass. Simulations were conducted for the pre-fire period (2016) and post-fire period (2018–2023). Burn severity was represented by modifying the Nesterov index in FATES to 75,000, 150,000, and 300,000 for low, moderate, and high severity, respectively. A no-fire scenario was also included. Simulations were performed for 16 grid cells in the American River Watershed across different burn severities and plant functional types. XGBoost (eXtreme Gradient Boosting) models were trained using the parameter ensembles and ELM-FATES-simulated outputs, including leaf area index (LAI), gross primary productivity (GPP), aboveground biomass, vegetation evaporation, transpiration, and soil evaporation. Models were trained separately for each year and burn severity, followed by SHAP (SHapley Additive exPlanations) analysis to identify changes in dominant parameters after fire disturbance. For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About. The data package contains the ELM-FATES simulation data. The scripts and data related to the analysis will be added later. The inputs and outputs from ELM-FATES are inside the “FATES” folder. “FATES_domain_surface” contains the domain and surface netcdfs that were used to run ELM-FATES in the study area. “FATES_parameters” contains the 1024 ensembles that were generated using Sobol sequence. “FATES_outputs” folder contains ELM-FATES simulated variables. All files are .csv and .nc (NetCDF).

Aboveground biomass↗
DOE OSTI2023

Analyzing barium titanate TiO2 surface interactions with tert-butylphosphonic acid using density functional theory

Abstract Barium titanate (BTO) is a widely researched ferroelectric useful for energy storage. While BTO’s surface chemistry is commonly studied using density functional theory, little has been published on the TiO2 surface. Here, we determined that BTO’s surface response can be decoupled from the ferroelectric response by using a pre-optimized ferroelectric slab and allowing only the top three atomic z-layers to respond to ligand binding. Multiple favorable binding modes were identified for hydrogen, hydroxyl, water, and tert-butyl phosphonic acid on BTO’s TiO 2 surface. Of these ligands, tBuPA dominates surface binding with binding energies as low as − 2.61 eV for its nine configurations. Graphical abstract

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Analyzing the effect of pressure on the properties of point defects in $\gamma\mathrm{U–Mo}$ through atomistic simulations

Uranium–molybdenum (U–Mo) alloys in monolithic fuel foil are the primary candidate for the conversion of high-performance research reactors in the USA. Monolithic fuel is utilized in a plate-type design with a zirconium diffusion barrier and aluminum cladding. These fuel types are unique in that they contain no plenum for the release of fission gases, which, in conjunction with the aluminum cladding, can lead to large stress states within the fuel. The nature of how fundamental processes of radiation damage, including the evolution of point defects, under such stresses occur is unknown. In this work, we present molecular dynamics simulations of the formation energy of point defects under applied stress. We report this work will allow for the implementation of stress-dependent microstructural evolution models of nuclear fuels, including those for both fission gas bubble growth and creep, which are critical to ensure the stable and predictable behavior of research reactor fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

ambrosia: An R package for calculating and analyzing food demand that is responsive to changing incomes and prices

The ambrosia R package was developed to calculate food demand for staples and non-staple commodities that is responsive to changing levels of incomes and prices. ambrosia implements the framework to quantify food demand as established by Edmonds et al. (Edmonds et al. 2017) and allows the user to explore and estimate different variables related to the food demand system. Currently ambrosia provides 3 main functions: (1) calculation of food demand for any given set of parameters including income levels and prices (2) estimation of parameters within a given a dataset. Note: ambrosia is used to calculate parameters for the food demand model implemented in the Global Change Analysis Model(GCAM) (3) exploration and preparation of raw data before starting a parameter estimation

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

gamut: A Geospatial R Package to Analyze Multisectoral Urban Teleconnections

Most cities in the United States withdraw surface water to meet public water supply needs. The lands on which this water is generated are often developed for human activities -- such as agriculture, mining, and industry -- that may compete for water resources or contaminate water supplies. Cities are thereby connected to other sectors through their water supply catchments. This connection is an example of an multisectoral urban teleconnection. The Geospatial Analytics for Multisectoral Urban Teleconnections (``gamut``) package provides national-scale information on these teleconnections by combining land use data with hydrological analysis to characterize urban source watershed human interactions across the conterminous United States.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

pymatgen-analysis-defects: A Python package for analyzing point defects in crystalline materials

Point defects can often determine the properties of semiconductor and optoelectronic materials. Due to the large simulation cell and the higher-cost density functionals required for defect simulations, the computational cost of defect calculations is often orders of magnitude higher than that of bulk calculations. As such, managing and curating the results of the defect calculations generated by a single user has the potential to save a significant amount of computational resources. Moreover, eventually building a high-quality, persistent defects database will significantly reduce the computational cost of defect calculations for the entire community.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Mechanistic Approach to Analyzing and Improving Unconventional Hydrocarbon Production [Slides]

DOE research is developing the physical basis and tools needed to manage pressure effectively to increase recovery efficiency. By coupling fast, accurate physics with machine learning, DOE is producing science-based platforms any operator can use. DOE’s research portfolio is targeting hydrocarbon transport at multiple scales, with the goal of increasing recovery efficiency. DOE’s research has led to new, fast & accurate platforms for predicting gas production from fractured shales. Using data from the MSEEL-I site to calibrate our physics-based model, we have early results on pressure management. We have shown that both mechanical and chemical processes in the matrix can negatively impact production.

08 HYDROGEN↗
DOE OSTI2020

Liquid Chromatography Mass Spectrometry of eutectic bis(2,2-dinitropropyl) acetal/formal: Analyzed Results

This report documents the analysis results produced using liquid chromatography tandem mass spectrometry (LC-MS/MS) to investigate the chemical changes produced by accelerated aging of a eutectic bis(2,2-dinitropropyl) acetal/formal nitroplasticizer (NP). A detailed discussion is given to explain the significance of identified NP degradation ions, which are essential to understand purposed degradation mechanisms. This report is the third of a series on the use of LC-MS/MS to understand the mechanisms of NP degradation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Analyzing Black Hole X-Rays with Simulations

We generate synthetic X-ray spectra of black holes from large-scale 3D GRMHD simulations performed on HPC machines. Here are a sampling of model spectra, characterized by the parameters indicated in the diagram below. The dashed red lines show power law fits to the parts of the spectrum observed by the X-ray telescope NuSTAR. How well these model spectra compare to real data helps us to characterize the physical realism of the underlying simulation techniques.

79 ASTRONOMY AND ASTROPHYSICS↗