Search NASA⌕ Search

SEARCH · Search NASA

Results for “Active Mirrors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Low-frequency fluctuations in the magnetosheath near the magnetopause

There are four low-frequency modes which may propagate in a high-beta nearly bi-Maxwellian plasma. These are the magnetosonic, Alfven, ion acoustic, and mirror modes. This manuscript defines a procedure based on linear Vlasov theory for the unique identification of these modes by use of transport ratios, dimensionless ratios of the fluctuating field and plasma quantities. A single parameter, the mode deviation is calculated using the plasma and magnetic field data gathered by the Active Magnetospheric Particle Tracer Explorers/Ion Release Module (AMPTE/IRM) spacecraft to identify the modes observed in the terrestial magnetosheath near the magnetopause. As well as determining the mode which best describes the observed fluctuations, it gives us a measure of whether or not the resulting identification is unique. Using 17 time periods temporally close to a magnetopause crossing, and confining our study to the frequency range from 0.01 to 0.04 Hz, we find that the only clearly identified mode in this frequency range is the mirror mode. Most commonly, the quasi-perpendicular mirror mode (with wave vector k roughly perpendicular to the background magnetic field B(sub zero) is observed. In two events the quasi-parallel mirror mode k parallel B(sub zero) was identified.

Denton, Richard E.↗
DOE OSTI2026

Raman and Terahertz Spectroscopy of Low-Frequency Chiral Phonons in Amino Acids

Chiral phonons are mirror-symmetric vibrations with nonzero angular momenta that correspond to twisting and rotational motions of multiple atoms. In chiral crystals, these include low-energy terahertz (THz)-range vibrations of the molecular segments involving dozens of atoms with energies sensitive to molecular chirality. Here, we present spectral signatures of chiral phonons in circularly polarized Raman optical activity (ROA) spectra from enantiomers of amino acid crystals. Along with complementary THz circular dichroism (TCD) measurements, our ROA data reveal several vibrational bands in enantiomers of valine, alanine, tyrosine, and proline between 30 and 150 cm –1 (∼1–4.5 THz) that exhibit opposite intensities. Density functional theory calculations confirm their assignment to twisting and shearing molecular motions. The simultaneous registration of chiral phonon modes by ROA and TCD demonstrates the necessity of these complementary techniques to identify complex mirror-asymmetric vibrational modes and offers new insights into their interactions with circularly polarized light.

36 MATERIALS SCIENCE↗
NASA NTRS1973

Friction-induced surface activity of some hydrocarbons with clean and oxide-covered iron

Sliding friction studies were conducted on a clean and oxide-covered iron surface with exposure of that surface to various hydrocarbons. The hydrocarbons included ethane, ethylene ethyl chloride, methyl chloride, and vinyl chloride. Auger cylindrical mirror analysis was used to follow interactions of the hydrocarbon with the iron surface. Results with vinyl chloride indicate friction induced surface reactivity, adsorption to surface oxides, friction sensitivity to concentration and polymerization. Variation in the loads employed influence adsorption and accordingly friction. In contrast with ethyl and vinyl chloride, friction induced surface reactivity was not observed with ethane and ethylene.

Buckley, D. H.↗
NASA NTRS1989

Polarization aberrations in the solar activity measurements experiments (SAMEX) solar vector magnetograph

An optical design and polarization analysis of the Air Force/NASA Solar Activity Measurements Experiments solar vector magnetograph optical system is performed. Polarization aberration theory demonstrates that conventional telescope coating designs introduce unacceptably high levels of polarization aberrations into the optical system. Several ultralow polarization mirror and lens coatings designs for this instrument are discussed. Balancing of polarization aberrations at different surfaces is demonstrated.

Mcguire, James P., Jr.↗
NASA NTRS1990

A rate equation approach to gain saturation effects in laser mode calculations

Space exploration and research require large amounts of power. Solar pumped laser systems have been shown to have the potential for meeting the performance requirements necessary for power transmission in space. The successful design of laser systems for these applications will depend, in part, on having a clear understanding of the development of the dynamical processes in the laser cavity and on the effects that changes in physical and design parameters have on laser performance. In particular, it is necessary to know the amplitude and phase distributions of the laser beam at the output aperture when steady state operation is achieved in order to determine the far-field power distribution. The output from the laser will depend on the active medium, the optical environment of the active material and on the gain distribution in the active region as laser action builds up and reaches steady state. An important component in the design process will be a realistic model of the active laser cavity. A computer model of the laser cavity, based on Huygens' principle was developed. The code calculates the amplitude and phase of an optical wave reflected back and forth between the mirrors of a laser cavity. The original code assumes a gain distribution which does not change with the buildup of oscillations in the cavity. A step in the direction of realism is the inclusion of a saturable gain medium in the cavity. The objective is to incorporate saturation effects into the existing computer model.

Roberts, Lila F.↗
NASA NTRS1994

Increase of carbonyl fluoride (COF2) in the stratosphere and its contribution to the 1992 budget of inorganic fluorine in the upper stratosphere

Volume mixing ratio profiles of COF2 have been derived through most of the stratosphere between 30 deg N and 54 deg S from series of 0.01-/cm resolution infrared solar spectra recorded in the occultation mode by the atmospheric trace molecule spectroscopy (ATMOS) instrument during the ATLAS 1 space shuttle mission of March-April 1992. When compared with similar results obtained from the ATMOS/Spacelab 3 mission of April-May 1985, the cumulative increase in the burden of COF2 in the middle and upper stratosphere was found to be 67% for that 7-year time interval. By combining a subset of these COF2 results with upper stratospheric concentrations of HF also derived from the ATMOS observations, it was further found that the budget of inorganic fluorine above 35 km altitude increased by (60 +/- 10)% over the 1985-1992 time interval, which corresponds to an average exponential rate of increase of (6.7 +/- 1/1)%/yr, or a linear rate of increase reference to 1985 of (8.5 +/- 1.3)%/yr at the 1 sigma confidence level. The total inorganic F atom volume mixing ratio found in the upper stratosphere for 1985 and 1992 and the increase during this perid mirror the rise in man-made fluorine-bearing compounds at the ground during the early to mid 1980s. This demonstrates the negligible impact of natural sources of fluorine, in particular volcanic activity, on the observed change in F in the upper stratosphere. Implications of the present findings and comparison with model results are discussed.

Zander, R.↗
NASA NTRS1994

Increase of carbonyl fluoride (COF2) in the stratosphere and its contribution to the 1992 budget of inorganic fluorine in the upper stratosphere

Volume mixing ratio profiles of COF2 have been derived through most of the stratosphere between 30 deg N and 54 deg S from series of 0.01-cm(exp -1) resolution infrared solar spectra recorded in the occultation mode by the atmospheric trace molecule spectroscopy (ATMOS) instrument during the ATLAS 1 space shuttle mission of March-April 1992. When compared with similar results obtained from the ATMOS/Spacelab 3 mission of April-May 1985, the cumulative increase in the burden of COF2 in the middle and upper stratosphere was found to be 67% for that 7-year time interval. By combining a subset of these COF2 results with upper stratospheric concentrations of HF also derived from the ATMOS observations, it was further found that the budget of inorganic fluorine above 35 km altitude increased by (60 +/- 10) % over the 1985-1992 time interval, which corresponds to an average exponential rate of increase of(6.7 +/- 1.1) % /yr , or a linear rate of increase referenced to 1985 of (8.5 +/- 1.3) % /yr at the 1(sigma) confidence level. The total inorganic F atom volume mixing ratio found in the upper stratosphere for 1985 and 1992 and the increase during this period mirror the rise in man-made fluorine-bearing compounds at the ground during the early to mid 1980s. This demonstrates the negligible impact of natural sources of fluorine, in particular volcanic activity, on the observed change of F in the upper stratosphere. Implications of the present findings and comparison with model results are discussed.

Zander, R.↗
NASA NTRS1976

Space and energy

Potential contributions of space to energy-related activities are discussed. Advanced concepts presented include worldwide energy distribution to substation-sized users using low-altitude space reflectors; powering large numbers of large aircraft worldwide using laser beams reflected from space mirror complexes; providing night illumination via sunlight-reflecting space mirrors; fine-scale power programming and monitoring in transmission networks by monitoring millions of network points from space; prevention of undetected hijacking of nuclear reactor fuels by space tracking of signals from tagging transmitters on all such materials; and disposal of nuclear power plant radioactive wastes in space.

Bekey, I.↗
NASA NTRS2017

Wavefront sensing for a future HabEx space telescope.

HabEx is a concept study for a next generation space telescope having a 4 to 6.5 m primary mirror diameter. Primarily designed for exoplanet science, but also carrying general astrophysics instruments, it will have stability requirements orders of magnitude more stringent than any previously flown space-based observatory. Wavefront control, including active sensing/control of wavefront jitter and drift, will be essential to achieving and maintaining coronagraph performance. There are currently two complementary techniques that can be used to sense the wavefront drift. An attractive method is to use starlight rejected from the coronagraph to sense changes in the wavefront incident on the coronagraph mask. This method suffers from photon noise especially when imaging dim stars. It is also unavailable during slews between target stars. Laser metrology is a complementary system in which a laser “truss” enables rigid body displacements of the optics to be measured from changes in the separation of pairs of optical fiducials which can be separated by many meters. In closed loop with actuated optics, laser metrology actively maintains rigid body alignment of the front-end optics, thereby eliminating the dominant source of wavefront drift. This method can maintain rigid body stability of the telescope optics and thereby wavefront control, even during slews between targets.

Martin, Stefan↗
NASA NTRS1988

Mode-medium instability in an unstable resonator

The mode-medium instability of an active medium in an unstable resonator is investigated. The asymptotic solution due to Horwitz (1973), valid for large Fresnel numbers in an empty cavity, is modified by introducing gain/phase sheets in front of the resonator mirrors. The effect of medium coupling to the mode in the cavity is obtained by introducing a general time-independent Green's function in the Fox-Li (1961) formulation. The time evolution is then obtained by repeated integration of the beam propagation in the cavity. The diffractive terms are shown to grow rapidly at the expense of the geometric term. This instability responsible for the deterioration of the beam quality is studied numerically for a CO2 lasing system as an example.

Sung, C. C.↗
NASA NTRS2004

Optical Modeling Activities for the James Webb Space Telescope (JWST) Project: Determining Image Motion and Wavefront Error Over an Extended Field of View with a Segmented Optical System - II

This is part two of a series on the optical modeling activities for JWST. Starting with the linear optical model discussed in part one, we develop centroid and wavefront error sensitivities for the special case of a segmented optical system such as JWST, where the primary mirror consists of 18 individual segments. Our approach extends standard sensitivity matrix methods used for systems consisting of monolithic optics, where the image motion is approximated by averaging ray coordinates at the image and residual wavefront error is determined with global tip/tilt removed. We develop an exact formulation using the linear optical model, and extend it to cover multiple field points for performance prediction at each instrument aboard JWST. This optical model is then driven by thermal and dynamic structural perturbations in an integrated modeling environment. Results are presented.

Howard, Joseph M.↗
NASA NTRS1981

Expansion of the nickel electrode

To observe a reasonable amount of expansion, months or years in acutal batteries are required. Therefore, the technique of electrode bending was developed. Active material is taken off a sample electrode on one side, and left only on the other side with a cadmium counter electrode. With this configuration, if the active material expands, the electrode will bend convex - concave towards this direction. This very small bending may be easily detected with light deflection. A laser beam was used to project it on the screen through a mirror attached on the electrode, thus making a very sensitive measurement of a very small expansion.

Lim, H. S.↗
NASA NTRS2002

New Cryogenic Optical Test Capability at Marshall Space Flight Center's Space Optics Manufacturing Technology Center

A new cryogenic optical testing capability exists at Marshall Space Flight Center's Space Optics Manufacturing Technology Center (SOMTC). SOMTC has been performing optical wavefront testing at cryogenic temperatures since 1999 in the X-ray Cryogenic Test Facility's (XRCF's) large vacuum chamber. Recently the cryogenic optical testing capability has been extended to a smaller vacuum chamber. This smaller horizontal cylindrical vacuum chamber has been outfitted with a helium-cooled liner that can be connected to the facility's helium refrigeration system bringing the existing kilowatt of refrigeration capacity to bear on a 1 meter diameter x 2 meter long test envelope. Cryogenic environments to less than 20 Kelvin are now possible in only a few hours. SOMTC's existing instruments (the Instantaneous Phase-shifting Interferometer (IPI) from ADE Phase-Shift Technologies and the PhaseCam from 4D Vision Technologies) view the optic under test through a 150 mm clear aperture BK-7 window. Since activation and chamber characterization tests in September 2001, the new chamber has been used to perform a cryogenic (less than 30 Kelvin) optical test of a 22.5 cm diameter x 127 cm radius of curvature SiO2 mirror, a cryogenic survival (less than 30 Kelvin) test of an adhesive, and a cryogenic cycle (less than 20 Kelvin) test of a ULE mirror. A vibration survey has also been performed on the test chamber. Chamber specifications and performance data, vibration environment data, and limited test results will be presented.

Kegley, Jeff↗
NASA NTRS2002

New Cryogenic Optical Test Capability at Marshall Space Flight Center's Space Optics Manufacturing Technology Center

A new cryogenic optical testing capability exists at Marshall Space Flight Center's Space Optics Manufacturing Technology Center (SOMTC). SOMTC has been performing optical wavefront testing at cryogenic temperatures since 1999 in the X-ray Cryogenic Test Facility's (XRCF's) large vacuum chamber. Recently the cryogenic optical testing capability has been extended to a smaller vacuum chamber. This smaller horizontal cylindrical vacuum chamber has been outfitted with a helium-cooled liner that can be connected to the facility's helium refrigeration system bringing the existing kilowatt of refrigeration capacity to bear on a 1 meter diameter x 2 meter long test envelope. Cryogenic environments to less than 20 Kelvin are now possible in only a few hours. SOMTC's existing instruments (the Instantaneous Phase-shifting Interferometer (IPI) from ADE Phase-Shift Technologies and the PhaseCam from 4D Vision Technologies) view the optic under test through a 150 mm clear aperture BK-7 window. Since activation and chamber characterization tests in September 2001, the new chamber has been used to perform a cryogenic (less than 30 Kelvin) optical test of a 22.5 cm diameter x 127 cm radius of curvature Si02 mirror, a cryogenic survival (less than 30 Kelvin) test of an adhesive, and a cryogenic cycle (less than 20 Kelvin) test of a ULE mirror. A vibration survey has also been performed on the test chamber. Chamber specifications and performance data, vibration environment data, and limited test results will be presented.

Kegley, Jeff↗
NASA NTRS2000

The Fundamental Physical Processes Producing and Controlling Stellar Coronal/Transition Region/Chromospheric Activity and Structure

Our LTSA (Long Term Space Astrophysics) research has utilized current NASA and ESA spacecraft, supporting ground-based IR, radio, and sub-mm telescopes, and the extensive archives of HST (Hubble Space Telescope), IUE (International Ultraviolet Explorer), ROSAT, EUVE (Extreme Ultraviolet Explorer), and other missions. Our research effort has included observational work (with a nonnegligible groundbased component), specialized processing techniques for imaging and spectral data, and semiempirical modelling, ranging from optically thin emission measure studies to simulations of optically thick resonance lines. In our previous LTSA efforts, we have had a number of major successes, including most recently: organizing and carrying out an extensive cool star UV survey in HST cycle eight; obtaining observing time with new instruments, such as Chandra and XMM (X-ray Multi-Mirror) in their first cycles; collaborating with the Chandra GTO program and participating with the Chandra Emission Line Project on multi-wavelength observations of HR 1099 and Capella. These are the main broad-brush themes of our previous investigation: a) Where do Coronae Occur in the Hertzsprung-Russell Diagram? b) Winds of Coronal and Noncoronal Stars; c) Activity, Age, Rotation Relations; d) Atmospheric Inhomogeneities; e) Heating Mechanisms, Subcoronal Flows, and Flares; f) Development of Analysis and Modelling Tools.

Ayres, T. R.↗
NASA NTRS1972

Laser with a transmitting window.

The effect of transmission of radiation through one mirror of a laser is investigated. For a laser oscillator the result is to change the effective resonance frequency and Q of the cavity. Using the same model for the cavity, a signal is injected into the active medium through the transmitting window, and its effect on the system studied. When the external signal is strong enough and sufficiently close to the natural frequency of the laser oscillator, the laser locks its frequency to the input signal. The equations describing the system are solved over the range of input frequencies where the laser is locked, and the resulting gain found. In the high-intensity limit the medium saturates, and the gain tends to that of a lossy cavity. As the input intensity vanishes, the gain approaches infinity and the system tends to a laser oscillator.

Spencer, M. B.↗
NASA NTRS1984

Support structures for large infrared telescopes

An infrared telescope requires an accuracy of its reflecting surfaces of less than a micrometer. Future missions may require such accuracy from telescopes that are 20 meters or larger in diameter. The structure for supporting such a telescope will most probably take the form of a deep truss. Various approaches for constructing the primary mirror in space are illustrated. One that employs automated deployment of interconnected reflector-structure modules was described in detail. Estimates were made of the precision obtainable with properly configured truss structures and the required ability of active control systems for achieving the desired accuracy.

Hedgepeth, J. M.↗
NASA NTRS2012

Intelligent Optical Systems Using Adaptive Optics

Until recently, the phrase adaptive optics generally conjured images of large deformable mirrors being integrated into telescopes to compensate for atmospheric turbulence. However, the development of smaller, cheaper devices has sparked interest for other aerospace and commercial applications. Variable focal length lenses, liquid crystal spatial light modulators, tunable filters, phase compensators, polarization compensation, and deformable mirrors are becoming increasingly useful for other imaging applications including guidance navigation and control (GNC), coronagraphs, foveated imaging, situational awareness, autonomous rendezvous and docking, non-mechanical zoom, phase diversity, and enhanced multi-spectral imaging. The active components presented here allow flexibility in the optical design, increasing performance. In addition, the intelligent optical systems presented offer advantages in size and weight and radiation tolerance.

Clark, Natalie↗