Search NASA⌕ Search

SEARCH · Search NASA

Results for “Advanced Air Mobility (AAM)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Evaluation of Response Surface Experiment Designs for Distributed Propulsion Aircraft Aero-Propulsive Modeling

Modern distributed hybrid and electric propulsion aircraft, including vertical, short, and conventional takeoff and landing configurations, exhibit significant aero-propulsive complexity and a large number of interacting test factors. This paper presents the development and evaluation of experiment designs for aero-propulsive characterization of distributed propulsion aircraft. Five different foundational response surface designs are evaluated to inform the development of two sequential design approaches tailored to complex aircraft aerodynamic characterization experiments. The first approach, which builds on sequential face-centered central composite designs, has been used previously to develop aero-propulsive models for complex aircraft using wind tunnel testing. The second approach is a new design strategy leveraging a regular I-optimal and nested I-optimal design that was developed for this study. The two sequential design strategies are compared for experiments with a large number of test factors using pre-experiment design evaluation metrics, as well as modeling results obtained from simulated wind tunnel data for the NASA LA-8 aircraft. The design evaluation metrics show that the sequential I-optimal base design has higher statistical power, lower correlation among candidate regressors, lower prediction variance, and more precise parameter estimates. The simulated wind tunnel experiments conducted using each design reveal that the sequential I-optimal base design has better predictive capability with fewer test points. The experiment design and evaluation procedures are described in detail to inform future aerodynamic characterization experiments for complex aircraft.

design of experiments↗
NASA NTRSDate not supplied

Statistical Wind-Tunnel Experimentation Advancements for eVTOL Aircraft Aero-Propulsive Model Development

Compared to many conventional aircraft, electric vertical takeoff and landing (eVTOL) vehicle designs present greater aero-propulsive complexity and many interacting factors requiring development of novel testing and model development strategies. This paper describes several advances in statistically-rigorous experiment design methods for wind-tunnel testing of eVTOL aircraft enabling accurate aero-propulsive model development. The techniques are applied to a subscale tilt-rotor eVTOL aircraft configuration built at NASA Langley Research Center that has 24 independent control effectors. The general testing approach, leveraging design of experiments and response surface methodology, is outlined and followed by a detailed description of the experiment design and modeling approach employed for different phases of the wind-tunnel testing. A new approach for gravitational tare modeling is developed and validated, which reduces the required wind-tunnel test time by nearly 50%. A mostly automated trim envelope determination approach is formulated to rapidly determine the aircraft flight envelope to inform transition testing for aero-propulsive model development. Efficient powered-airframe characterization tests are conducted using a nested I-optimal design approach formulated in previous simulation-based testing. The collective wind-tunnel testing approach facilitates rapid characterization of eVTOL aircraft configurations and produces accurate aero-propulsive models that can be used in flight dynamics simulations.

design of experiments↗
NASA NTRS2024

The Knowledge-based Digital Platform Concept for Advanced Air Mobility Research and Development

National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) is spearheading an innovative digital engineering approach to integrate, communicate, and facilitate the research of multi-modal transportation systems. The Knowledge-based Digital Platform (KbDP) is a concept being developed that ties the workflows of Project Managers (PM), Principal Investigators (PI), and System Engineers (SE) together across organizational boundaries. The overarching vision for the KbDP Concept for AAM R&D is a substantial undertaking. The initial concept and implementation will focus on UAM operations to tractably learn and adjust the concept with a manageable database. Lessons learned and best practices with a smaller scope will enable successful scalability to AAM R&D or even to the entire modes of transportation and logistics. The UAM vision is one in which advanced technologies and new operational procedures enable practical and cost-effective air transport as an integrated mode of movement of people and goods throughout metropolitan areas. Initial implementation of three KbDP concepts of use shows promising benefits to NASA’s Air Traffic Management-Exploration (ATM-X) UAM Airspace Subproject. It is envisioned that the KbDP will manage an information database defined by mathematical, data science, and system engineering principles. AIML algorithms play a vital role in this KbDP concept by extracting meaningful knowledge from the information database, which the human user leverages to improve the efficiency and effectiveness of their research greatly.

ATM↗
NASA NTRSDate not supplied

Development of Modeling & Simulation Capability to Analyze Supply Chain

Supply chain has brought up many challenges to the current aerospace industry (e.g. limited sources, lack of inventory, and cyber security). The purpose of this research is to develop a web-based modeling and simulation platform for supply chains relating to Advanced Air Mobility and vertical take-off and landing vehicles (VTOLs).

Cybersecurity↗
NASA NTRSDate not supplied

Aero-Propulsive Damping Characterization for eVTOL Aircraft Using Free Motion Wind-Tunnel Testing

This paper describes an electric vertical takeoff and landing (eVTOL) aircraft system identification method applied using three degree-of-freedom (3DOF) free motion wind-tunnel testing. The approach, similar to flight-test system identification, allows for efficient mathematical model development of the aero-propulsive moments applied on an eVTOL vehicle, including aerodynamic damping effects. The approach is demonstrated using a subscale tiltrotor eVTOL aircraft mounted on a new 3DOF wind-tunnel apparatus. To execute the test, a model-based 3DOF control system is designed to track attitude commands and transition the aircraft based on the freestream dynamic pressure. While the flight controller is active, orthogonal phase-optimized multisine inputs are injected into the attitude command and control effector command signals to enable collection of informative data for model identification. Aero-propulsive models are then identified at several reference conditions in the transition flight envelope using the equation-error method in the frequency domain. The identified models are shown to have a good fit to the modeling data and good prediction capability of data not used for model identification. The method yields aerodynamic damping estimates using less wind-tunnel test time compared to traditional forced oscillation experiments and supplements static wind-tunnel testing to produce a comprehensive transition aero-propulsive model suitable for use in flight dynamics simulations.

RAVEN↗
NASA NTRSDate not supplied

Aero-Propulsive Modeling for eVTOL Aircraft Using Wind Tunnel Testing with Multisine Inputs

A novel approach for modeling the aero-propulsive characteristics of an electric vertical takeoff and landing (eVTOL) aircraft was developed and demonstrated in wind tunnel testing. The approach was applied to the NASA LA-8 tandem tilt-wing eVTOL aircraft, using an efficient, hybrid experiment design composed of a static I-optimal response surface design for slowly-varying test variables, and dynamic orthogonal phase-optimized multisine excitations for the control surfaces and electric propulsors. Both the static and dynamic experiment designs were executed simultaneously to collect informative data for model identification. Statistically-weighted multivariate orthogonal function modeling was used to combine local modeling results computed in the frequency domain using data collected with dynamic excitations operating on the control effectors to form an aggregate aero-propulsive model. The final identified model exhibited good predictive capability when compared to validation data acquired separately from the data used to develop the model. The required test time using these new techniques was reduced by at least a factor of five compared to previous static wind tunnel testing for the LA-8 aircraft, while providing more informative data, greater parameterization flexibility, and high-quality models.

system identification↗
NASA NTRS2023

Advances in Aero-Propulsive Modeling for Fixed-Wing and eVTOL Aircraft Using Experimental Data

Small unmanned aircraft and electric vertical takeoff and landing (eVTOL) aircraft have recently emerged as vehicles able to perform new missions and stimulate future air transportation methods. This dissertation presents several system identification research advancements for these modern aircraft configurations enabling accurate mathematical model development for flight dynamics simulations based on wind-tunnel and flight-test data. The first part of the dissertation focuses on advances in flight-test system identification methods using small, fixed-wing, remotely-piloted, electric, propeller-driven aircraft. A generalized approach for flight dynamics model development for small fixed-wing aircraft from flight data is described and is followed by presentation of novel flight-test system identification applications, including: aero-propulsive model development for propeller aircraft and nonlinear dynamic model identification without mass properties. The second part of the dissertation builds on established fixed-wing and rotary-wing aircraft system identification methods to develop modeling strategies for transitioning, distributed propulsion, eVTOL aircraft. Novel wind-tunnel experiment designs and aero-propulsive modeling approaches are developed using a subscale, tandem tilt-wing, eVTOL aircraft, leveraging design of experiments and response surface methodology techniques. Additionally, a method applying orthogonal phase-optimized multisine input excitations to aircraft control effectors in wind-tunnel testing is developed to improve test efficiency and identified model utility. Finally, the culmination of this dissertation is synthesis of the techniques described throughout the document to form a flight-test system identification approach for eVTOL aircraft that is demonstrated using a high-fidelity flight dynamics simulation. The research findings highlighted throughout the dissertation constitute substantial progress in efficient empirical aircraft modeling strategies that are applicable to many current and future aeronautical vehicles enabling accurate flight simulation development, which can subsequently be used to foster advancement in many other pertinent technology areas.

system identification↗
NASA NTRSDate not supplied

Comparison of Two Community Noise Models Applied to a NASA Urban Air Mobility Concept Vehicle

Predictions of community noise exposure from a NASA urban air mobility (UAM) concept vehicle have been conducted for representative operations using the FAA Aviation Environmental Design Tool (AEDT) in order to demonstrate modeling tool interoperability and assess applicability, capabilities and limitations of integrated noise modeling tools. To both quantify limitations and highlight other capabilities, a comparative analysis is performed using a time-domain simulation method, in particular, using the Volpe Advanced Acoustic Model (AAM). Using the same source noise model, the 3D directivity of a UAM concept vehicle is predicted in terms of aeroacoustic pressure time histories at a sphere of observer positions near the vehicle. In addition to distilling those data to a set of noise-power-distance data for input to AEDT, the data are processed preserving spectral directivity, into one-third and one-twelfth octave bands for input to AAM. Results from AEDT and AAM modeling are provided for a variety of metrics to demonstrate the effect that source noise directivity and propagation modeling fidelity have on predicted results at receptors over a study area.

urban air mobility↗
NASA NTRSDate not supplied

Comparison of Two Community Noise Models Applied to a NASA Urban Air Mobility Concept Vehicle

Predictions of community noise exposure from a NASA urban air mobility (UAM) concept vehicle have been conducted for representative operations using the FAA Aviation Environmental Design Tool (AEDT) in order to demonstrate modeling tool interoperability and assess applicability, capabilities and limitations of integrated noise modeling tools. To both quantify limitations and highlight other capabilities, a comparative analysis is performed using a time-domain simulation method, in particular, using the Volpe Advanced Acoustic Model (AAM). Using the same source noise model, the 3D directivity of a UAM concept vehicle is predicted in terms of aeroacoustic pressure time histories at a sphere of observer positions near the vehicle. In addition to distilling those data to a set of noise-power-distance data for input to AEDT, the data are processed preserving spectral directivity, into one-third and one-twelfth octave bands for input to AAM. Results from AEDT and AAM modeling are provided for a variety of metrics to demonstrate the effect that source noise directivity and propagation modeling fidelity have on predicted results at receptors over a study area.

urban air mobility↗
NASA NTRSDate not supplied

Data & Reasoning Fabric Minimum Viable Product

A Data & Reasoning Fabric (DRF) is envisioned to enable the full potential of air mobility by providing all data and reasoning where they are needed. The DRF provides a marketplace based on an open foundational ecosystem of data and reasoning exchange between the many systems that must seamlessly interplay to manage the complex and dense airspace operations required to achieve advanced air mobility goals. The DRF marketplace is decentralized and will not be owned by any single party. To deliver reference designs and development environments that catalyze broad private and public sector buy-in and self-sustaining development of DRF and associated standards, DRF activities will collaboratively test these technologies, open standards and architectures, and an integrated framework with end-users.

DRF↗
NASA NTRSDate not supplied

Lidar and UAS Measurements of Winds for the NASA Advanced Air Mobility Mission

The envisioned future of Advanced Air Mobility involves low-altitude operation of a new class of air vehicles. The low altitudes of the flight paths would have these vehicles spending most of their operation in conditions where unpredictable wind and turbulence effects may occur. Wind measurements will hence be critical to ensure safe and efficient operations for AAM. Such wind measurement could be used as a monitoring system for warning of hazardous wind events, as data input to forecasting models, or as a research tool to understand wind effects in complex environments. To meet this need NASA is evaluating wind sensing technologies with a capability to probe the atmospheric boundary layer. Doppler lidar is a leading candidate ground-based sensor, as shown by the decades-long history of being an effective tool for many wind studies. However, there is a need to re-assess the Doppler wind lidars for the AAM application which involves evaluating wind effects as vehicles operate in and out of vertiports, notably regarding spatial resolution. Meeting the needs for spatial resolution may involve the use of dual-Doppler techniques, rather than just single Doppler lidar. The study was furthermore motivated by looking toward the future of AAM, in which the air vehicles involved can also provide wind measurements. Airborne wind measurements, obtained directly from vehicle-mounted anemometers or indirectly from vehicle navigation data, offer a means to compare remotely sensed wind lidar with in-situ measurements. The following sections report on results of wind measurements obtained using lidar and the small uninhabited aircraft systems (sUAS’s) operating in the same volume of air.

Adam Medina↗
NASA NTRSDate not supplied

AAM Ecosystem Aircraft Working Group: Human Factors

NASA’s Urban Air Mobility (UAM) Sub-Project is engaged in research to support the introduction of air taxis into the National Airspace System. An important aspect of system development is to consider the human factors aspects of aircraft design. This presentation gives a background on human factors and suggests some important human factors issues for UAM and Advanced Air Mobility.

aeronautics↗
NASA NTRSDate not supplied

Multi-Vehicle (m:N) Operations in the NAS - NASA's Research Plans

The Advanced Air Mobility movement is occurring across the world with goals of enabling, affordable, efficient, accessible, and safe air transportation at a much larger scale than today’s operations, largely enabled by electrification and automation. Transformative and disruptive innovations are emerging that will support an ecosystem designed to transport goods and people to locations not traditionally served by air transportation. To realize the full vision of AAM, technology will be needed to allow a few operators to operate many vehicles (m:N). The benefits of m:N operations are described, along with the current state-of-the-art, barriers, need, and NASA’s plans to address some of the barriers, including a Multi-Vehicle (m:N) Working Group with goals of producing a community-developed operational approval roadmap for various domains.

multi-vehicle↗
NASA NTRSDate not supplied

Evaluation of Novel eVTOL Aircraft Automation Concepts

As new electric propulsion technologies have matured, many new electric propulsion Vertical Takeoff and Landing (eVTOL) aircraft concepts have been proposed. These new aircraft concepts enable the creation of new aviation markets including Urban Air Mobility (UAM) but also pose new challenges in safety assurance. One early challenge is the evaluation of the diverse aircraft configurations and accompanying advanced control systems and automation designed to aid controllability. This paper describes a research activity to propose candidate means of evaluation for the aircraft concepts and automation in the context of UAM operations. The research activity proposes the adaptation of an evaluation design standard used by the military for advanced rotorcraft along with proposed descriptions and definitions to support evaluation of diverse automated concepts in the civilian eVTOL community.

AAM↗