Search NASA⌕ Search

SEARCH · Search NASA

Results for “Annulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Wall boundary layer development near the tip region of an IGV of an axial flow compressor

The annulus wall boundary layer inside the blade passage of the inlet guide vane (IGV) passage of a low-speed axial compressor stage was measured with a miniature five-hole probe. The three-dimensional velocity and pressure fields were measured at various axial and tangential locations. Limiting streamline angles and static pressures were also measured on the casing of the IGV passage. Strong secondary vorticity was developed. The data were analyzed and correlated with the existing velocity profile correlations. The end wall losses were also derived from these data.

Lakshminarayana, B.↗
NASA NTRS1984

An experimental study of the compressor rotor blade boundary layer

The three-dimensional turbulent boundary layer developing on a rotor blade of an axial flow compressor was measured using a miniature 'x' configuration hot-wire probe. The measurements were carried out at nine radial locations on both surfaces of the blade at various chordwise locations. The data derived includes streamwise and radial mean velocities and turbulence intensities. The validity of conventional velocity profiles such as the 'power law profile' for the streamwise profile, and Mager and Eichelbrenner's for the radial profile, is examined. A modification to Mager's crossflow profile is proposed. Away from the blade tip, the streamwise component of the blade boundary layer seems to be mainly influenced by the streamwise pressure gradient. Near the tip of the blade, the behavior of the blade boundary layer is affected by the tip leakage flow and the annulus wall boundary layer. The 'tangential blockage' due to the blade boundary layer is derived from the data. The profile losses are found to be less than that of an equivalent cascade, except in the tip region of the blade.

Pouagare, M.↗
NASA NTRS1984

Fitts' Law? a Test of the Relationship Between Information Load and Movement Precision

The independence of information load (Hick's Law) and movement precision (Fitts' Law) was tested using additive factors methodology. Subjects were required to classify stimuli according to a decision rule with a variable entropy. The stimuli were presented in the center of the CRT screen. In response, subjects had to move a cursor from a starting point near the stimulus to the appropriate target. The precision of the response movement was varied by manipulating the ratio of the radius of the annulus to the width of the target area. The dependent measure was elapsed time between onset of the stimulus and completion of the response movement. Independence of the Hick's Law and Fitts' Law components of the reaction time was tested with an analysis of variance. Presence of an interaction would suggest that a decision stage and a response stage are dependent, and cannot be considered discrete steps in a serial process.

Zalaski, M.↗
NASA NTRS1985

Computer studies of baroclinic flow

Programs necessary for computing the transition curve on the regime diagram for the atmospheric general circulation experiment (AGOE) were completed and used to determine the regime diagram for the rotating annulus and some axisymmetric flows for one possible AGOE configuration. The effect of geometrical constraints on the size of eddies developing from a basic state is being examined. In AGOE, the geometric constraint should be the width of the shear zone or the baroclinic zone. Linear and nonlinear models are to be used to examine both barotropic and baroclinic flows. The results should help explain the scale selection mechanism of baroclinic eddies in the atmosphere experimental models such as AGOE, and the multiple vortex phenomenon in tornadoes.

Gall, R.↗
NASA NTRS1985

Dark Halo Craters and the Thickness of Grooved Terrain on Ganymede

Dark halo craters on grooved terrain on Ganymede represent potential probes of the subsurface geology. These craters are surrounded by a broad, diffuse low albedo annulus, or halo and have apparently lost the bright rim and ray deposits associated with very young craters. The recognition of dark halo craters, almost all greater than 12 km in diameter, indicates that material darker and redder than grooved terrain material forms a stratigraphy horizon at about 1 km depth the present surface of grooved terrain in Uruk Sulcus. This material is most likely downdropped cratered terrain material, which only larger craters have excavated into. This is most consistent with extensional tectonic models for grooved terrain formation whereby the lithosphere is stretched and blocks of ancient cratered terrain are downdropped along bounding faults, and subsequently resurfaced by a shallow layer of relatively clean icy material. Evidence for the preservation of cratered terrain material at shallow depth beneath grooved terrain material poses great difficulties for alternative grooved and smoothed terrain formation mechanisms.

Schenk, P. M.↗
NASA NTRS1984

Deep Water Formation

Some simple arguments on plumes of dense water and filling boxes were given. What determines the time for a large-scale environment to be modified by the injection of dense water at its edge is the mass flux, not the buoyancy flux. However, it is the denser buoyancy flux, when there are several competing plumes (e.g., the Mediterranean outflow versus the Denmark Strait outflow) that determines which plume will provide the bottom water for that ocean basin. It was noted that the obvious laboratory experiment (rotate a pie-shaped annulus, and heat/cool it on the surface) had never been performed. Thus, to some extent our belief that deep convection is somehow automatic at high latitudes to close off some ill-defined meridional circulation has never been tested. A summary of deep convection was given. The two fundamental formation mechanisms were shown. Of the two, it is open-ocean convection which forms the water which supplies the Denmark Strait overflow -- in all likelihood, as formation in the Greenland Sea remains stubbornly unobserved. But it is the slope convection which finally creates North Atlantic deep water, following the Denmark Strait overspill.

Killworth, P. D.↗
NASA NTRS1984

Development of a rotor wake-vortex model, volume 1

Certain empirical rotor wake and turbulence relationships were developed using existing low speed rotor wave data. A tip vortex model was developed by replacing the annulus wall with a row of image vortices. An axisymmetric turbulence spectrum model, developed in the context of rotor inflow turbulence, was adapted to predicting the turbulence spectrum of the stator gust upwash.

Majjigi, R. K.↗
NASA NTRS1984

Magnetic field models

Magnetic field models for Saturn based on data obtained by the Pioneer 11, Voyager 1, and Voyager 2 spacecraft are discussed. Saturn is distinguished form earth and Jupiter by the symmetry of its internal field about its axis of rotation; however, the strong periodic modulation of Saturn's radio emission is strong evidence of some departure from axial symmetry. Analysis of energetic charged particle absorption signatures observed by Pioneer and Voyager spacecraft are consistent with axisymmetric models of Saturn's magnetic field and demonstrate that any equatorial displacement of the dipole is limited to less than 0.01 R(S). Saturn's magnetosphere appears to be intermediate in configuration to those of earth and Jupiter. An equatorial ring current of about 10 million A, confined to a 5 R(S) thick annulus with inner and outer radii of 8 and 16 R(S), has a major effect on the geometry of the outer magnetosphere. Field lines are moderately but measurably stretched out in the equatorial plane.

Connerney, J. E. P.↗
NASA NTRS1985

The Influence of Low Frequency Mechanical Vibrations on the Growth of Single Crystals

The optimum conditions for crystal growth are usually achieved either by suppressing convective fluid flows (e.g., by the use of a low-gravity environment) or by over-riding thermal and solutal convection by the use of a strong stirring action. A novel stirring technique has been developed which involves subjecting a vertical crucible to a circle in a horizontal plane (without rotation). Use of an amplitude of 3 mm at a frequency of approx 6 Hz produced complete mixing of a non-uniform aqueous liquid in a few seconds. The mixing action involved the downward flow of liquid in the outer annulus of the liquid, driven by surface waves. When the downward flowing liquid reaches the bottom of the crucible, it is reflected in a central, upward flowing spiral. This flow pattern should be beneficial for crystal growth by the Bridgman method since it will sweep impurities away from the walls and produce a more convex solid-liquid interface. Initial attempts to apply the new stirring technique to CdTe crystal growth did not show significant improvement in the number of crystals nucleated, but the interface shape appeared to be close to that predicted.

Feigelson, R. S.↗
NASA NTRS1985

A root-mean-square pressure fluctuations model for internal flow applications

A transport equation for the root-mean-square pressure fluctuations of turbulent flow is derived from the time-dependent momentum equation for incompressible flow. Approximate modeling of this transport equation is included to relate terms with higher order correlations to the mean quantities of turbulent flow. Three empirical constants are introduced in the model. Two of the empirical constants are estimated from homogeneous turbulence data and wall pressure fluctuations measurements. The third constant is determined by comparing the results of large eddy simulations for a plane channel flow and an annulus flow.

Chen, Y. S.↗
NASA NTRS1985

On the nonlinear characteristics of the axisymmetric flow regime: Cylindrical and spherical systems

The physical relationship between steady axisymmetric flows that might be observed in the atmosphere and in laboratory vessels is investigated theoretically. This is accomplished by comparing both the nonlinear structure and the thermal forcing mechanisms in two truncated spectral models of flow in the atmosphere and the rotating laboratory cylinder, respectively. Under statically stable conditions, the response of the internally forced spherical model (which is developed here from a set of new orthonormal basis functions) exhibits steady behavior different from that in the externally forced cylindrical model. Two regions of multiple steady solutions occur in the cylindrical model, under stable conditions, that are not found in the spherical one. The possible physical relevance of these multiple solutions is investigated by determining their location in parameter space with respect to the classical Hadley-Rossby transition curve. The results suggest that the wave flow regime, in an annulus, might develop catastrophically when an upper symmetric flow ceases to exist.

Higgins, R. W.↗
NASA NTRS1985

Effects of velocity profile and inclination on dual-jet-induced pressures on a flat plate in a crosswind

An experimental study was conducted to determine surface pressure distributions on a flat plate with dual subsonic, circular jets exhausting from the surface into a crossflow. The jets were arranged in both side-by-side and tandem configurations and were injected at 90 deg and 60 deg angles to the plate, with jet-to-crossflow velocity ratio of 2.2 and 4. The major objective of the study was to determine the effect of a nonuniform (vs uniform) jet velocity profile, simulating the exhaust of a turbo-fan engine. Nonuniform jets with a high-velocity outer annulus and a low-velocity core induced stronger negative pressure fields than uniform jets with the same mass flow rate. However, nondimensional lift losses (lift loss/jet thrust lift) due to such nonuniform jets were lower than lift losses due to uniform jets. Changing the injection angle from 90 deg to 60 deg resulted in moderate (for tandem jets) to significant (for side-by-side jets) increases in the induced negative pressures, even though the surface area influenced by the jets tended to reduce as the angle decreased. Jets arranged in the side-by-side configuration led to significant jet-induced lift losses exceeding, in some cases, lift losses reported for single jets.

Jakubowski, A. L.↗
NASA NTRS1985

Forced response analysis of an aerodynamically detuned supersonic turbomachine rotor

The effect of aerodynamic detuning on the supersonic flow induced forced response behavior of a turbomachine blade row is analyzed using an aeroelastic model. The rotor is modeled as a flat plate airfoil cascade representing an unwrapped rotor annulus; the aerodynamic detuning is achieved by alternating the circumferential spacing of adjacent rotor blades. The total unsteady aerodynamic loading on the blading, due to the convection of the transverse gust past the airfoil cascade as well as that resulting from the motion of the cascade, is developed in terms of influence coefficients. The model developed here is then used to analyze the effect of aerodynamic detuning on the flow induced forced response behavior of a twelve-bladed rotor with Verdon's Cascade B flow geometry.

Hoyniak, D.↗
NASA NTRS1986

Upgrading telescopes by active pupil wavefront correction

Exit pupil correction of the Large Deployable Reflector's (a proposed IR to sub-mm space telescope) segmented primary can be done by reimaging it onto a like segmented surface at the exit pupil. This allows the primary to be more flexible, the adaptive element to be smaller, and the supporting structure to be cheaper than if all correction were performed at a stiffly supported primary. Piston, tilt, and decenter errors of an annulus of the primary and the equations for the required corrections are considered. To verify these, the perturbations with spline functions in the lens design program are simulated. Strehl ratios used to measure image quality show that a piston error of 1 mm is fully corrected over a 5 arcmin field for an f/10 system with a 0.7 n.a. primary at 30 micrometers. Limits of correction are also shown for tilt and decenter errors of segments. Tolerances are given for tilt and decenter errors of the remaining optics also.

Stacy, J. E.↗
NASA NTRS1986

Nonlinear rotordynamics analysis

Three analytic consequences of the nonlinear Jeffcott equations are examined. The primary application of these analyses is directed toward understanding the excessive vibrations recorded in the Liquid Oxygen (LOX) pump of the Space Shuttle Main Engine (SSME) during hot firing ground testing. The first task is to provide bounds on the coefficients of the equations which delimit the two cases of numerical solution as a circle or an annulus. The second task examines the mathematical generalization to multiple forcing functions, which includes the special problems of mass imbalance, side force, rubbing, and combination of these forces. Finally, stability and boundedness of the steady-state solutions is discussed and related to the corresponding linear problem.

Day, W. B.↗
NASA NTRS1985

Theoretical and experimental studies of baroclinic processes

An experimental study in a baroclinic annulus with heating and cooling on the upper and lower horizontal surfaces was completed. Four basic regimes of flow were observed: (1) axisymmetric flow, (2) cellular (deep) convection, (3) convective rolls (boundary layer), and (4) baroclinic instability. There was no symmetric (or nearly symmetric) baroclinic instability observed, although it was determined by numerical calculations that we transversed regions in parameter space where the symmetric instability was present. The non-symmetric baroclinic instability (Eady type) was observed instead. Although the vertical depth was rather small and hence viscous damping was strong, large-amplitude baroclinic waves were made possible by imposing a very weak static stability.

Miller, T.↗
NASA NTRS1985

Theoretical and experimental design studies for the Atmospheric General Circulation Experiment

The major criterion for the Atmospheric General Circulation Experiment (AGCE) design is that it be possible to realize strong baroclinic instability in the spherical configuration chosen. A configuration was selected in which a hemispherical shell of fluid is subjected to latitudinal temperature gradients on its spherical boundaries and the latitudinal boundaries are insulators. Work in the laboratory with a cylindrical version of this configuration revealed more instabilities than baroclinic instability. Since researchers fully expect these additional instabilities to appear in the spherical configuration also, they decided to continue the laboratory cylindrical annulus studies. Four flow regimes were identified: an axisymmetric Hadley circulation, boundary layer convection, baroclinic waves and deep thermal convection. Regime diagrams were prepared.

Fowlis, W. W.↗
NASA NTRS1987

Aeroacoustics of supersonic jet flows from contoured and solid/porous conical plug-nozzles

The results of an experimental study of the acoustic far-field, the shock associated noise, and the nature of the repetitive shock structure of supersonic jet flows issuing from plug-nozzles having externally-expanded plugs with pointed termination operated at a range of supercritical pressure ratios Xi approaching 2 to 4.5 are reported. The plug of one of these plug-nozzles was contoured. The other plug-nozzles had short conical plugs with either a solid surface or a combination of solid/porous surface of different porosities. The contoured and the uncontoured plug-nozzles had the same throat area and the same annulus-radius ratio K = R sub p/R sub N = 0.43. As the result of modifications of the shock structure, the acoustic performance of improperly expanded jet flows of an externally-expanded short uncontoured plug of an appropriate geometry with suitably perforated plug and a pointed termination, is shown to approach the acoustic performance of a shock-free supersonic jet issuing from an equivalent externally-expanded contoured plug-nozzle.

Dosanjh, Darshan S.↗