Search NASA⌕ Search

SEARCH · Search NASA

Results for “Arsenic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

302 records · Page 17

Rapid photooxidation and removal of As(III) from drinking water using Fe-Mn composite oxide

Fe-Mn composite oxide (FMO) is widely applied to the oxidation and removal of As(III) from water. However, As(III) can directly reduce manganese oxides, decreasing the oxidation capacity or reusability and thereby greatly limiting the applicability of FMO. Here, the oxidation capacity and reusability of FMO for As(III) were efficiently improved by light radiation, and the effect of typical coexisting ions (SO 4 2– and Ca 2+ ) on the removal of As(III) was also studied. O 2 •– produced from excited manganese oxide and ligand-to-metal charge transfer in iron oxide-As(III) complex enhanced As(III) oxidation and removal under light radiation. At an initial As(III) concentration of 1000 μg L –1 , the total As concentration was respectively decreased to 11.5, 1.5 and 4.4 μg L –1 under darkness, UV light and sunlight at 180 min, and could be reduced to below the guideline limitation of drinking water (10 μg L –1 ) within 40 and 60 min under UV light and sunlight, respectively. SO 4 2– exhibited negligible effect on As removal efficiency because FMO had obviously lower adsorption capacity and selectivity for SO 4 2– than for As(V). The adsorption of coexisting Ca 2+ on manganese oxide decreased the negative charge on the FMO surface, thereby improving As(III) adsorption and oxidation. FMO exhibited excellent reusability, and a total As removal efficiency of 99.1% was still maintained after five cycles of an adsorption-desorption process under UV light. Finally, this work elucidates the photochemical oxidation and removal mechanism of FMO for As(III), and proposes a low-cost and efficient method for the detoxification of As(III)-contaminated drinking water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Contesting with the Ganges Water Machine in South Asia: Theory versus Reality

Recently, there has been much interest in how to manage the water resources of the Ganges River Basin (GRB), the cradle of Asian civilization, currently supporting >500 million people. This also includes cleaning up the Ganges river, regarded as one of the most polluted mega-rivers of the world. Historically, the transboundary Ganges river and its tributaries, flowing through India, Nepal, and Bangladesh, have become extensively polluted and disrupted, mostly because of river engineering and increased discharge of industrial and urban waste. Compounding the problem, in the past few decades, intense groundwater abstraction from the GRB aquifers has led to unprecedented groundwater level depletion in some locations. At present, the GRB groundwater levels are strongly influenced by depth-dependent abstraction, which is predicted to intensify in the future, given the increasing water demand. Therefore, with impending climate change, designing the coupled river water–groundwater management necessary to meet the goal for sustainable access to clean water for a huge population, has become an arduous challenge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Trace Key Mechanistic Features of the Arsenite Sequestration Reaction with Nanoscale Zerovalent Iron

Nanoscale zerovalent iron (nZVI) is considered as a highly efficient material for sequestrating arsenite, but the origin of its high efficacy as well as the chemical transformations of arsenite during reaction is not well understood. Here, in this study, we report an in situ X-ray absorption spectroscopy (XAS) study to investigate the complex mechanism of nZVI reaction with arsenite under anaerobic conditions at the time scale from seconds to days. The time-resolved XAS analysis revealed a gradual oxidation of As III to As V in the course of minutes to hours in both the solid and liquid phase for the high (above 0.5 g/L) nZVI dose system. When the reaction time increased up to 60 days, As V became the dominant species. The quick-scanning extended X-ray absorption fine structure (QEAXFS) was introduced to discover the transient intermediate at the highly reactive stage, and a small red-shift in As K-edge absorption edge was observed. The QEAXFS combined with density functional theory (DFT) calculation suggested that the red-shift is likely due to the electron donation in a Fe-O-As complex and possible active sites of As sequestrations include Fe(OH) 4 and 4-Fe cluster. This is the first time that the transient reaction intermediate was identified in the As-nZVI sequestration system at the fast-reacting early stage. This study also demonstrated usefulness of in situ monitoring techniques in environmental water research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Node Distortions as a Means of Defect Engineering in Zr-Based MOFs

Defect engineering in Zr-based metal–organic frameworks (Zr-MOFs) has focused primarily on missing-linker defects. However, recent studies suggest that node dehydroxylation–which creates distortions and coordinatively unsaturated Zr sites (Zr cus )–may have a more significant impact on properties. The present work uses pair distribution function (PDF) and thermogravimetric analysis coupled with systematic defect manipulation to study the effect of node dehydroxylation and missing-linker defects in UiO-66. By employing rapid heat treatment (RHT) under humid flow, we tracked the transition from high-symmetry [Zr 6 O 4 (OH) 4 ] 12+ to distorted [Zr 6 O 6 ] 12+ nodes. This structural evolution significantly improves As(V) uptake, whereas increasing the number of missing linkers–via chemical treatment or RHT of mixed-ligand frameworks–fails to enhance performance. Crucially, our detection of distorted nodes in as-synthesized UiO-66 also raises the possibility that these defects were silently present in many earlier studies that span various applications, where their role in governing performance may have been inadvertently overlooked. The present study challenges the prevailing “missing-linker” paradigm and establishes cluster dehydroxylation as a defect-engineering strategy to enhance Lewis-acidic performance in Zr-MOFs.

Adsorption↗

Controlling $T_c$ through Band Structure and Correlation Engineering in Collapsed and Uncollapsed Phases of Iron Arsenides

Recent observations of selective emergence (suppression) of superconductivity in the uncollapsed (collapsed) tetragonal phase of LaFe 2 As 2 has rekindled interest in understanding what features of the band structure control the superconducting $T_c$. In this work, we show that the proximity of the narrow Fe-$d_{xy}$ state to the Fermi energy emerges as the primary factor. In the uncollapsed phase this state is at the Fermi energy, and is most strongly correlated and a source of enhanced scattering in both single and two particle channels. The resulting intense and broad low energy spin fluctuations suppress magnetic ordering and simultaneously provide glue for Cooper pair formation. In the collapsed tetragonal phase, the $d_{xy}$ state is driven far below the Fermi energy, which suppresses the low-energy scattering and blocks superconductivity. A similar source of broad spin excitation appears in uncollapsed and collapsed phases of CaFe 2 As 2 . This suggests controlling coherence provides a way to engineer $T_c$ in unconventional superconductors primarily mediated through spin fluctuations.

36 MATERIALS SCIENCE↗

Improved precision in As speciation analysis with HERFD-XANES at the As K -edge: the case of As speciation in mine waste

High-energy-resolution fluorescence-detected (HERFD) X-ray absorption near-edge spectroscopy (XANES) is a spectroscopic method that allows for increased spectral feature resolution, and greater selectivity to decrease complex matrix effects compared with conventional XANES. XANES is an ideal tool for speciation of elements in solid-phase environmental samples. Accurate speciation of As in mine waste materials is important for understanding the mobility and toxicity of As in near-surface environments. In this study, linear combination fitting (LCF) was performed on synthetic spectra generated from mixtures of eight measured reference compounds for both HERFD-XANES and transmission-detected XANES to evaluate the improvement in quantitative speciation with HERFD-XANES spectra. The reference compounds arsenolite (As 2 O 3 ), orpiment (As 2 S 3 ), getchellite (AsSbS 3 ), arsenopyrite (FeAsS), kaňkite (FeAsO 4 ·3.5H 2 O), scorodite (FeAsO 4 ·2H 2 O), sodium arsenate (Na 3 AsO 4 ), and realgar (As 4 S 4 ) were selected for their importance in mine waste systems. Statistical methods of principal component analysis and target transformation were employed to determine whether HERFD improves identification of the components in a dataset of mixtures of reference compounds. LCF was performed on HERFD- and total fluorescence yield (TFY)-XANES spectra collected from mine waste samples. Arsenopyrite, arsenolite, orpiment, and sodium arsenate were more accurately identified in the synthetic HERFD-XANES spectra compared with the transmission-XANES spectra. In mine waste samples containing arsenopyrite and either scorodite or kaňkite, LCF with HERFD-XANES measurements resulted in fits with smaller R -factors than concurrently collected TFY measurements. The improved accuracy of HERFD-XANES analysis may provide enhanced delineation of As phases controlling biogeochemical reactions in mine wastes, contaminated soils, and remediation systems.

58 GEOSCIENCES↗

Ground-State In-Plane Light-Holes in GaAs/AlGaAs Structures [Book Chapter]

We have performed low-temperature magnetoluminescence, far-infrared cyclotron resonance, and magneto-transport measurements on narrow (4.5 nm) GaAs/Al 0.25 Ga 0.75 As single quantum-wells. The ground state in-plane valence band was found to be light and very nonparabolic, i.e., at zone center, the valence band mass is m v ≈ 0. 1 and for E f ≈ 10 meV, m v ≈ 0.25.

36 MATERIALS SCIENCE↗

Geochemistry, RNA radiocarbon signature, and metatranscriptome data from Rifle, Colorado groundwater well

Understanding the different sources of carbon subsurface microbes use is highly informative yet remains challenging. The goal of this work was to develop and test a cultivation-independent method that analyzes both the radiocarbon and ribosomal RNA (rRNA) signature of unamplified RNA from the same environmental sample, and that collectively characterizes community carbon utilization under in situ conditions. The method was applied to a filtered groundwater sample from a geochemically reduced zone of a shallow alluvial aquifer near Rife, Colorado (CO), where multiple potential carbon sources co-occur. The radiocarbon and RNA-Seq results, while addressing diverse sample properties, indicated a strikingly similar conclusion about the quantitative role of autotrophy in the subsurface microbial community.This data package provides (1) ribosomal RNA (rRNA) sequences for groundwater microbial populations, (2) the taxonomic identity and relative abundance of groundwater microbial populations based on these rRNA sequences, (3) radiocarbon signatures of the rRNA indicating the source of carbon used by the groundwater microbial populations (provided in both Word docx file and pdf file), (4) geochemical measurements for the monitoring well corresponding to these measurements.

54 ENVIRONMENTAL SCIENCES↗

Gas-mediated trace element incorporation into rhyolite-hosted topaz: A synchrotron microbeam XAS study

Magmatic gas exsolving during late-stage cooling of shallow magmas has been considered an important facilitator of low-pressure alteration and metal transport. However, the chemical properties of such gas, particularly its metal transport mechanisms and capacity, remain elusive. Trace elements in minerals produced by gas-mediated surface reaction or precipitation from gas capture details of gas composition and reaction pathways. However, interpretation of mineral trace element contents is dependent on understanding crystallographic controls on gas/mineral partitioning. Here, this work investigates the structural accommodation of As, Mn, Ga, Ge, Fe, and Ti in vapor-deposited topaz of vesicular topaz rhyolite from the Thomas Range, Utah, through single-crystal synchrotron microbeam X-ray techniques on picogram quantities of those trace elements. X-ray absorption near edge structure (XANES) data indicates that these elements are incorporated into topaz as As 5+ , Fe 3+ , Mn 3+ , Ti 4+ , Ga 3+ , and Ge 4+ . Extended X-ray absorption fine structure (EXAFS) analysis for these trace elements, compared to EXAFS of structural Al and Si, reveals that As 5+ and Ge 4+ are incorporated directly into the tetrahedral site of the topaz structure, with the octahedral site accommodating Mn 3+ , Fe 3+ , Ga 3+ , and Ti 4+ . For As 5+ and Fe 3+ , the structural impact of substitution extends to at least second neighbors (other elements were only resolvable to first neighbors). Further interpretation of the EXAFS results suggests that the substitution of Ti 4+ results in increased distortion of the octahedral site, while the other trace elements induce more uniform expansion correlating in magnitude to their ionic radius. Comparison of quantified X-ray fluorescence (XRF) data for two topaz crystals from this rhyolite reveals variable trace element concentrations for As 5+ , Fe 3+ , Ga 3+ , and Ti 4+ , reflective of a source gas undersaturated in these trace elements changing in concentration over the period of topaz deposition. The identical Ge 4+ content of the two topaz crystals suggests that Ge 4+ in the gas was buffered by the growth of another Ge 4+ -bearing phase, such as quartz. The very low Mn 3+ content in the topaz crystals does not reflect the abundance of Mn 3+ in the gas (saturation of Mn is evidenced by coexisting bixbyite). Instead, it suggests a strong Jahn-Teller inhibitory effect to the substitution of Mn 3+ for Al 3+ in the distorted octahedral site of topaz. It is proposed that exsolution of an HF-enriched gas from cooling rhyolitic magma led to local scouring of Al, Si, and trace metals from the magma. Once topaz crystals nucleated, self-catalyzed reactions that recycle HF led to continued growth of topaz.

36 MATERIALS SCIENCE↗

Doping CdTe and CdSeTe for higher efficiency

Thin film cadmium telluride is one of the most successful photovoltaic technologies on the market today. Second only to silicon in yearly output and accounting for 40% of U.S. utility-scale photovoltaic installation, CdTe is known for its ease of manufacture, ideal bandgap, and low levelized cost of energy. Despite its commercial success, CdTe underperforms compared to its theoretical potential. The current world record CdTe device is only 21.0% compared to a theoretical maximum of 33.1%. This significant discrepancy in efficiencies can mostly be attributed to the poor open-circuit voltage of CdTe devices. Compared to silicon technologies, CdTe has a large voltage deficiency, exceeding 250 mV.

14 SOLAR ENERGY↗

On the New Oxyarsenides Eu 5 Zn 2 As 5 O and Eu 5 Cd 2 As 5 O

The new quaternary phases Eu5Zn2As5O and Eu5Cd2As5O have been synthesized by metal flux reactions and their structures have been established through single-crystal X-ray diffraction. Both compounds crystallize in the centrosymmetric space group Cmcm (No. 63, Z = 4; Pearson symbol oC52), with unit cell parameters a = 4.3457(11) Å, b = 20.897(5) Å, c = 13.571(3) Å; and a = 4.4597(9) Å, b = 21.112(4) Å, c = 13.848(3) Å, for Eu5Zn2As5O and Eu5Cd2As5O, respectively. The crystal structures include one-dimensional double-strands of corner-shared MAs4 tetrahedra (M = Zn, Cd) and As–As bonds that connect the tetrahedra to form pentagonal channels. Four of the five Eu atoms fill the space between the pentagonal channels and one Eu atom is contained within the channels. An isolated oxide anion O2– is located in a tetrahedral hole formed by four Eu cations. Applying the valence rules and the Zintl concept to rationalize the chemical bonding in Eu5M2As5O (M = Zn, Cd) reveals that the valence electrons can be counted as follows: 5 × [Eu2+] + 2 × [M2+] + 3 × [As3–] + 2 × [As2–] + O2–, which suggests an electron-deficient configuration. The presumed h+ hole is confirmed by electronic band structure calculations, where a fully optimized bonding will be attained if an additional valence electron is added to move the Fermi level up to a narrow band gap (Eu5Zn2As5O) or pseudo-gap (Eu5Cd2As5O). In order to achieve such a formal charge balance, and hence, narrow-gap semiconducting behavior in Eu5M2As5O (M = Zn, Cd), europium is theorized to be in a mixed-valent Eu2+/ Eu3+ state.

36 MATERIALS SCIENCE↗