Search NASA⌕ Search

SEARCH · Search NASA

Results for “BALLISTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Selected solar electric propulsion and ballistic missions studies

Selected missions using solar electric propulsion and conventional propulsion systems were studied. The accomplishment of the tasks required extensive modification of the trajectory optimization computer program HILTOP. In addition to adding new program features, HILTOP was completely restructured to reduce execution time. The specific mission studies reported on are the direct and Venus swingby missions to the comet Encke and solar electric propulsion missions to Encke and to a distance of 0.25 AU from the sun.

Mann, F. I.↗
NASA NTRS1973

Linear filtering of ballistic-entry-probe data for atmospheric reconstruction.

A Kalman-Schmidt filter is used to estimate atmospheric and trajectory parameters for entry into the Venusian atmosphere. A significantly improved version of the Landing Trajectory Reconstruction (LTR) computer program, used to obtain the estimates is described. Major improvements involve precision and linearity control of numerical differencing, corrected perturbation modeling, and incorporation of a refractivity model. Important results show that gyroscopic data are not usable with LTR, that atmospheric properties are generally well estimated for altitudes less than 100 km, and that the two LTR modes of operation are complementary in performance.

Sabin, M. L.↗
NASA NTRS1974

Laser-scanning techniques for rapid ballistics identification

Two different laser-scanning methods may be utilized. In each case scanned cylindrical bullet surface is displayed ""unwrapped'' on oscilloscope screen. Bullets are compared by photographing each display and superimposing negatives of two images. With some modifications bullets can be scanned and compared by superimposing images on screen of dual-beam oscilloscope.

Woodburgy, R. C.↗
NASA NTRS1974

A study of the effects of solid phase reactions on the thermal degradation and ballistic properties of solid propellants

The thermal stability of perchlorate composite propellants was studied at 135 and 170 C. The experimental efforts were concentrated on determining the importance of heterogeneous oxidizer-fuel reactions in the thermal degradation process. The experimental approach used to elucidate the mechanisms by which the oxidizer fuel composites thermally degrade was divided into two parts: (1) keeping the fuel constant and varying the nature of the oxidizers, and (2) holding the oxidizer constant and varying the fuel components. The fuel component primarily utilized in the first phase was polyethylene. Oxidizers included KClO4, KClO3, NH4ClO4 and NH4ClO4 doped with materials such as chlorate, phosphate and arsenate. In the second phase the oxidizer used was primarily NH4ClO4 while the fuels included saturated and unsaturated polybutadiene prepolymers and a series of bonding agents. Techniques employed in the current study include thermogravimetric measurements, differential thermal analysis, infrared, mass spectrometry, electron microscopy, and appropriate wet chemical analysis.

Schmidt, W. G.↗
NASA NTRS1974

Ballistic mode Mercury orbiter mission opportunity handbook extension

Interplanetary trajectory characteristics are presented, for Venus swingbys to Mercury, where multiple revolutions about the Sun are permitted. Additional consideration is given to the use of multiple Venus swingbys and/or to midcourse, near perilhelion, propulsive maneuvers to improve the performance of the mission as measured in terms of payload in Mercury orbit. Missions in 1980, 1983, 1985 and 1988 were analyzed with navigation results also developed. An exploratory investigation established the availability of low energy mission opportunities in 1991, 1994, 1996 and 1999.

Hollenbeck, G. R.↗
NASA NTRS1974

Nonlinear parameter identification: Ballistic range experience applicable to flight testing

The parameter identification scheme being used is a differential correction least squares procedure (Gauss-Newton method). The position, orientation, and derivatives of these quantities with respect to the parameters of interest (i.e., sensitivity coefficients) are determined by digital integration of the equations of motion and the parametric differential equations. The application of this technique to three vastly different sets of data is used to illustrate the versatility of the method and to indicate some of the problems that still remain.

Chapman, G.↗
NASA NTRS1974

Study of ballistic mode comet Encke mission opportunities

An analysis was conducted of the space mission to intercept the comet Encke. The two basic types of flight geometry considered for the mission are described. The primary interactions between time-of-flight and performance characteristics are displayed. The representative spacecraft characteristics for the Titan 3/Centaur launch vehicle are tabulated. The navigation analyses for the two missions are developed to show: (1) assessment of the navigation feasibility of the missions, (2) determination of the total velocity budget for the trim maneuvers, and (3) evaluation of dispersions at comet encounter.

Hollenbeck, G. R.↗
NASA NTRS1975

Imaging on ballistic missions to comet Encke

Imaging for navigation and science has been studied for a 1980 Encke flyby at 0.4 to 0.8 AU from the sun with spinning and three-axis spacecraft. Trajectory errors, maneuvers, encounter geometry, imaging performance, and data transmission were considered. Onboard comet sightings are needed for navigation. Recommended for a three-axis spacecraft are two vidicon cameras and a nucleus sensor for closed-loop pointing control. The cameras are essentially the Mariner 9 and Mariner 10 instruments; the nucleus sensor is an updated version of a sensor flown on Mariners 6 and 7. For a spinning spacecraft, a framing camera using a charge-coupled device and a spin-scan photometer are proposed. The framing camera would be a new design; it would not be despun, but the spin axis should point along the comet-centered velocity vector. The photometer is essentially that flown on Pioneer 10 and 11.-

Jaffe, L. D.↗
NASA NTRS1975

Requirements and Capabilities for Planetary Missions: Mariner Encke Ballistic Flyby 1980

This mission will provide a broad-based fast reconnaissance of comet Encke, building a data base for subsequent more detailed comet investigations, including rendezvous. After a 3 month flight, the spacecraft will encounter the comet at a nominal range of about 500 km. Flyby velocity will be 7 to 28 km/sec depending on choice of arrival data (0 to 35 days before Encke perihelion) and launch vehicle. The spacecraft will be similar to the MVM 73 spacecraft, with scan platform and 117 kbps encounter data rate, and designed to survive the thermal environment of 0.34 to 0.8 AU.

Ball, G. G.↗
NASA NTRS1976

Ballistic Signature Identification System Study

The first phase of a research project directed toward development of a high speed automatic process to be used to match gun barrel signatures imparted to fired bullets was documented. An optical projection technique has been devised to produce and photograph a planar image of the entire signature, and the phototransparency produced is subjected to analysis using digital Fourier transform techniques. The success of this approach appears to be limited primarily by the accuracy of the photographic step since no significant processing limitations have been encountered.

Source record↗
NASA NTRS1976

Ballistic trajectories for Mercury Orbiter missions using optimal Venus flybys, a systematic search

The considered approach, which has been previously studied by Hollenbeck et al. (1973) makes use of a Venus gravity assist. The search for ideal trajectories for Mercury Orbiter missions involves a determination of trajectories with the lowest possible Mercury approach speed. Ideal Venus-to-Mercury transfers and opportunities are discussed. The second part of the reported investigation is concerned with the determination of suitable trajectories for the trip from earth to Venus. On the basis of the obtained data it appears that the best ten trajectories can deliver spacecraft from a low of 720 kg to a high of 1230 kg to orbits with 500 km periapse and 24 hr periods. The corresponding flight times are 790 days and 1243 days.

Bender, D. F.↗
NASA NTRS1978

Precise terrestrial time: A means for improved ballistic missile guidance analysis

An approach developed to improve the ground instrumentation time tagging accuracy and adapted to support the Minuteman ICBM program is desired. The Timing Insertion Unit (TIU) technique produces a telemetry data time tagging resolution of one tenth of a microsecond, with a relative intersite accuracy after corrections and velocity data (range, azimuth, elevation and range rate) also used in missile guidance system analysis can be correlated to within ten microseconds of the telemetry guidance data. This requires precise timing synchronization between the metric and telemetry instrumentation sites. The timing synchronization can be achieved by using the radar automatic phasing system time correlation methods. Other time correlation techniques such as Television (TV) Line-10 and the Geostationary Operational Environmental Satellites (GEOS) terrestial timing receivers are also considered.

Ehrsam, E. E.↗
NASA NTRS1980

Heatshield material selection for advanced ballistic reentry vehicles

The Performance of staple rayon fiber and AVTEX continuous rayon fiber was evaluated as precursor materials for heatshields. The materials studied were referenced to the IRC FM5055A heatshield materials flown during the past decade. Three different arc jet facilities were used to simulate portions of the reentry environment. The IRC FM5055A and the AVTEX FM5055G, both continuous rayon fiber woven materials having the phenolic impregnant filled with carbon particles were compared. The AVTEX continuous fiber, unfilled material FM5822A was also examined to a limited extent. Test results show that the AVTEX FM5055G material provided a close substitute for the IRC FM5055A material both in terms of thermal protection and roll torque performance.

Legendre, P. J.↗
NASA NTRS1984

Ballistic comet exploration mission options

Trajectory options and mission opportunities of cometary rendezvous missions begining in 1990 are explored. The study is constrained to the capabilities of the Mariner Mark II multi-mission spacecraft, Shuttle launch and Centaur G-prime boost. The mission would be targeted at collecting an atomized sample, near the comet perihelion, and returning the sample for analysis. Mission trajectories, launch dates, payload masses and flight durations are provided for 13 comets. All missions would take from 4-8 yr and deliver a 600-2000 kg payload. A survey of mission opportunities involving Jupiter gravity assists is also presented.

Yen, C.-W. L.↗
NASA NTRS1986

Ballistic Mercury orbiter mission via Venus and Mercury gravity assists

It is shown that it is possible to deliver a payload of 600 to 2000 kg to a 300-km circular orbit at Mercury using presently available NASA Space Transportation Systems and a single-stage bipropellant chemical rocket. This superior payload performance is attained by swingbys of Venus, plus (more importantly), the use of the reverse Delta-V/EGA process. In contrast to the Delta-V/EGA process (used to boost the launch energy by returning to earth for a gravity assist), the reverse Delta-V/EGA process reduces the Mercury approach energy each time a spacecraft makes a near-resonant return to Mercury for a gravity assist and reduces the orbit-capture Delta-V requirement. The mission sequences for such high-performance missions are described, and example mission opportunities for the years 1990 to 2010 are presented.

Yen, C.-W. L.↗