Search NASA⌕ Search

SEARCH · Search NASA

Results for “Beam polarization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Sky-wave backscatter - A means for observing our environment at great distances.

During the last five years, much progress has been made in the understanding of sky-wave backscatter. An explanation of the various interacting phenomena is presented, as is a review of the current state of knowledge reflecting recent advances in observational methods and analytic techniques. New narrow-beam antennas, coupled with signal modulations that permit fine resolution in time delay, are beginning to yield information concerning the character of the scatterers, which now can be separately discerned. These narrow beams also permit study of polarization fading from small regions, and this shows promise as a means for learning the distant sea state. Doppler shifts of a fraction of a hertz on signals of tens of megahertz are separable, permitting isolation of sea returns from ground returns by virtue of the Doppler effect resulting from sea-wave speed; this also suggests a potential sea-monitoring principle. Despite these advances, there is little practical application of sky-wave backscatter as a means of environmental monitoring. This lack is attributed to the large remaining gaps in our understanding of the echoes and our inability to interpret the forms of data that can be acquired with equipment of reasonable cost.

Croft, T. A.↗

Orbit-spectrum sharing between the fixed-satellite and broadcasting-satellite services at 12 GHz

This paper identifies and evaluates strategies for sharing the geostationary orbit in the band 11.7 to 12.2 GHz between domestic systems in the fixed-satellite and broadcasting-satellite services. The effectiveness of two distinct types of sharing strategies, referred to as spectrum division and orbit division, is determined for various deployments of selected baseline systems representing the two services and for various combinations of sharing tactics such as frequency interleaving, crossed-polarization operation, and crossed-beam operation. Effectiveness is measured by the 'utilization factor', defined as the number of channels provided by the baseline systems when using an assigned share of the orbit-spectrum resource, relative to what they could provide if given the entire resource. Computer simulation is used to verify the intra- and interservice interference compatibility of the assumed deployments. It is concluded that total utilization factors close to 100 percent can be achieved with both spectrum-division and properly-chosen orbit-division strategies.

Reinhart, E. E.↗

Fast polarization changes in mm microwave emission of weak multistructured solar bursts

Circular polarization of weak multistructured solar bursts was measured at mm microwaves with unprecedented sensitivity (0.03 sfu rms) and high time resolution (1ms). It was shown that sudden changes occur in the degree of polarization with time scales of 0.04 to 0.3 s. In most cases the degree of polarization attained maximum values before the maximum flux in both mm microwaves and hard X-rays with time scales of 0.04 to 1.0 s. The timing accuracy in determining the degree of polarization was 40 ms. Physical phenomena are discussed invoking one or a combination of various possible causes for the observed effects. The bursts at mm microwaves were weak compared to the contribution of the preexisting active regions, and therefore the changes in magnetoionic propagation conditions for emerging radiation plays an important role in the observed effects. Composite effects due to more than one polarizing mechanism or more than one polarized spots within the antenna beam are discussed.

Kaufmann, P.↗

Broadcasting satellites at 12 GHz for Region 2: Technical characteristics

Technical parameters such as satellite antenna characteristics, Earth station requirements, bandwidths, channelization, and allowable carrier-to-interference ratios are discussed. An overview of the downlink plan is given, including a histogram of the transmitter power requirements. The plan includes satellite orbit positions, spacecraft transmitted powers, antennas beam sizes, channel assignments, and polarizations.

Miller, E. F.↗

Technical characteristics of the broadcasting satellite plan at 12 GHz for the Western Hemisphere

Technical parameters such as satellite antenna characteristics, earth station requirements, bandwidths, channelization, and allowable carrier-to-interference ratios are discussed. An overview of the downlink plan is given, including a histogram of the transmitter power requirements. The plan includes satellite orbit positions, spacecraft transmitted powers, antennas beam sizes, channel assignments, and polarizations.

Miller, E. F.↗

Omni-directional L-band antenna for mobile communications

The principle and design of an L-band omni-directional mobile communication antenna are discussed. The antenna is a circular wave guide aperture with hybrid circuits attached to higher order mode excitation. It produces polarized and symmetric two split beams in elevation. The circular waveguide is fed by eight probes with a 90 degree phase shift between their inputs. Radiation pattern characteristics are controlled by adjusting the aperture diameter and mode excitation. This antenna satisfies gain requirements as well as withstanding the harsh environment.

Kim, C. S.↗

Influence of a finite scattering volume on the determination of electron-impact coherence parameters

Superelastic electron scattering from laser-excited Ba-138 ...6s6p (1)P is investigated both theoretically and experimentally. The theoretical framework is developed and incorporated into a model of a realistic scattering geometry of finite spatial extent. Model calculations predict that the dependence of the superelastic scattering intensity on the linear polarization direction of the laser beam can be severely distorted due to the existence of a finite scattering volume. Measurements obtained confirm the presence of this distortion and are well described by the model calculations. Conclusions are drawn concerning the influence of this effect on the extraction of electron-impact coherence parameters.

Zetner, P. W.↗

Analysis of a generalized dual reflector antenna system using physical optics

Reflector antennas are widely used in communication satellite systems because they provide high gain at low cost. Offset-fed single paraboloids and dual reflector offset Cassegrain and Gregorian antennas with multiple focal region feeds provide a simple, blockage-free means of forming multiple, shaped, and isolated beams with low sidelobes. Such antennas are applicable to communications satellite frequency reuse systems and earth stations requiring access to several satellites. While the single offset paraboloid has been the most extensively used configuration for the satellite multiple-beam antenna, the trend toward large apertures requiring minimum scanned beam degradation over the field of view 18 degrees for full earth coverage from geostationary orbit may lead to impractically long focal length and large feed arrays. Dual reflector antennas offer packaging advantages and more degrees of design freedom to improve beam scanning and cross-polarization properties. The Cassegrain and Gregorian antennas are the most commonly used dual reflector antennas. A computer program for calculating the secondary pattern and directivity of a generalized dual reflector antenna system was developed and implemented at LeRC. The theoretical foundation for this program is based on the use of physical optics methodology for describing the induced currents on the sub-reflector and main reflector. The resulting induced currents on the main reflector are integrated to obtain the antenna far-zone electric fields. The computer program is verified with other physical optics programs and with measured antenna patterns. The comparison shows good agreement in far-field sidelobe reproduction and directivity.

Acosta, Roberto J.↗

Aberrations of a horizontal-vertical depolarizer

Ray-trace equations for uniaxial birefringent materials are used here to derive third-order estimates for aberrations that are produced in imaging through uniaxial plates and horizontal-vertical (HV) depolarizers. An HV depolarizer is a spatial pseudodepolarizer; it converts a uniform input polarization state into a continuum of spatially varying polarization states in an output beam. An HV depolarizer consists of two birefringent wedges whose crystal axes are crossed at 90 deg. The interface between the wedges is included, which leads to a spatially varying retardance that provides the spatial pseudodepolarization. In HV depolarizers, spherical aberration, astigmatism, and image doubling are the principal aberrations for on-axis objects. Only spherical aberration occurs in isotropic plates, while the presence of birefringent wedges introduces astigmatism and image doubling. It is shown that image separation is proportional to the magnitude of the retardance variation.

Mcclain, Stephen C.↗

Interference effects on Space Station Freedom and space shuttle orbiter Ku-band downlinks

The space shuttle orbiter (SSO) and Ku-band single access return (KSAR) link and the Space Station Freedom (SSF) KSAR link via the tracking and data relay satellite system (TDRSS) use the same carrier frequency. The interference between spacecraft is minimized by opposite antenna polarizations and by TDRSS antenna beam pointing, but if the SSF and SSO are in close proximity, it is expected that mutual interference will be significant. Recently, Tsang and Su (1988, 1989) simulated the mutual interference effects, using a practical nonlinear bandlimited channel. The purpose of this paper is to demonstrate that a simplified (i.e., linear band-limited channel) analytical approach will yield adequate accuracy for the expected range of operating conditions. Relative degradation in bit energy-to-thermal noise power spectral density ratio to achieve a 10 exp -5 coded bit-error-probability is determined to be 4 dB for the Ku-band SSO-to-TDRS I-channel return link with a 4.5 dB effective signal-to-interference total power ratio (S/I) when the Ku-band SSF-to-TDRS return link interferes, whereas Su's simulation yields approximately 5 dB degradation. For the Ku-band SSF-to-TDRS return link, both analysis and simulation results yield a relative signal degradation of 0.4 dB at the effective S/I = 21.6 dB. In conclusion, interference on the Ku-band SSO-to-TDRS I-channel return link is significant, but on the Ku-band SSF-to-TDRS return link it is negligible.

Kwon, Hyuck M.↗

Optimization of microscopic and macroscopic second order optical nonlinearities

Nonlinear optical materials (NLO) can be used to extend the useful frequency range of lasers. Frequency generation is important for laser-based remote sensing and optical data storage. Another NLO effect, the electro-optic effect, can be used to modulate the amplitude, phase, or polarization state of an optical beam. Applications of this effect in telecommunications and in integrated optics include the impression of information on an optical carrier signal or routing of optical signals between fiber optic channels. In order to utilize these effects most effectively, it is necessary to synthesize materials which respond to applied fields very efficiently. In this talk, it will be shown how the development of a fundamental understanding of the science of nonlinear optics can lead to a rational approach to organic molecules and materials with optimized properties. In some cases, figures of merit for newly developed materials are more than an order of magnitude higher than those of currently employed materials. Some of these materials are being examined for phased-array radar and other electro-optic switching applications.

Marder, Seth R.↗

An Inflatable L-Band Microstrip SAR Array

Inflatable structures have been identified as one of the enabling technologies to achieve low mass, high packaging efficiency, and reliable deployment for future NASA spaceborne synthetic aperture radar (SAR) array antennas. A current L-band SAR antenna development, with aperture size of 10 m x 3 m, is required to have the capabilities of dual-linear polarization, 80-MHz bandwidth, electronic beam scanning, and less than 100 kg of mass. An inflatable concept, which employs the inflatable tubular frame structure to support a multilayer, thin membrane, microstrip array radiating aperture, has been identified. It uses a "roll-up" concept, for deploying the thin membranes to form a planar array aperture. To demonstrate this concept, two contracts were independently given to ILC Dover, Inc. and L'Garde Corp. for each to construct a 1/3 size (3.3 m x 1.0 m) functional model with an inflatable structure at L-band frequency. JPL provided both contractors with the antenna RF design and the etched thin membranes. The ILC Dover model has been delivered to JPL and gone through a series of deployment and RF tests. This is believed to be the first inflatable array antenna ever developed. This paper presents the mechanical and electrical constructions of this inflatable array and its test results.

Huang, J.↗

Thermal Stir Welding Development at Marshall Space Flight Center

Solid state welding processes have become the focus of welding process development at NASA's Marshall Space Flight Center. Unlike fusion weld processes such as tungsten inert gas (TIG), variable polarity plasma arc (VPPA), electron beam (EB), etc., solid state welding processes do not melt the material during welding. The resultant microstructure can be characterized as a dynamically recrystallized morphology much different than the casted, dentritic structure typical of fusion weld processes. The primary benefits of solid state processes over fusion weld processes include superior mechanic properties and the elimination of thermal distortion and residual stresses. These solid state processes attributes have profoundly influenced the direction of advanced welding research and development within the NASA agency. Thermal Stir Welding (TSW) is a new solid state welding process being developed at the Marshall Space Flight Center. Unlike friction stir welding, the heating, stirring and forging elements of the weld process can be decoupled for independent control. An induction coil induces energy into a workpiece to attain a desired plastic temperature. An independently controlled stir rod, captured within non-rotating containment plates, then stirs the plasticized material followed by forging plates/rollers that work the stirred weld joint. The independent control (decoupling) of heating, stirring and forging allows, theoretically, for the precision control of microstructure morphology. The TSW process is being used to evaluate the solid state joining of Haynes 230 for ARES J-2X applications. It is also being developed for 500-in (12.5 mm) thick commercially pure grade 2 titanium for navy applications. Other interests include Inconel 718 and stainless steel. This presentation will provide metallurgical and mechanical property data for these high melting temperature alloys.

Ding, Robert J.↗

On Applications of Disruption Tolerant Networking to Optical Networking in Space

The integration of optical communication links into space networks via Disruption Tolerant Networking (DTN) is a largely unexplored area of research. Building on successful foundational work accomplished at JPL, we discuss a multi-hop multi-path network featuring optical links. The experimental test bed is constructed at the NASA Glenn Research Center featuring multiple Ethernet-to-fiber converters coupled with free space optical (FSO) communication channels. The test bed architecture models communication paths from deployed Mars assets to the deep space network (DSN) and finally to the mission operations center (MOC). Reliable versus unreliable communication methods are investigated and discussed; including reliable transport protocols, custody transfer, and fragmentation. Potential commercial applications may include an optical communications infrastructure deployment to support developing nations and remote areas, which are unburdened with supporting an existing heritage means of telecommunications. Narrow laser beam widths and control of polarization states offer inherent physical layer security benefits with optical communications over RF solutions. This paper explores whether or not DTN is appropriate for space-based optical networks, optimal payload sizes, reliability, and a discussion on security.

Hylton, Alan Guy↗

Advanced Antenna Design for NASA's EcoSAR Instrument

Advanced antenna arrays were designed for NASA's EcoSAR airborne radar instrument. EcoSAR is a beamforming synthetic aperture radar instrument designed to make polarimetric and "single pass" interferometric measurements of Earth surface parameters. EcoSAR's operational requirements of a 435MHz center frequency with up to 200MHz bandwidth, dual polarization, high cross-polarization isolation (> 30 dB), +/- 45deg beam scan range and antenna form-factor constraints imposed stringent requirements on the antenna design. The EcoSAR project successfully developed, characterized, and tested two array antennas in an anechoic chamber. EcoSAR's first airborne campaign conducted in the spring of 2014 generated rich data sets of scientific and engineering value, demonstrating the successful operation of the antennas.

phased array↗

Dealing with Beam Structure in PIXIE

Measuring the B-mode polarization of the CMB radiation requires a detailed understanding of the projection of the detector onto the sky. We show how the combination of scan strategy and processing generates a cylindrical beam for the spectrum measurement. Both the instrumental design and the scan strategy reduce the cross coupling between the temperature variations and the B-modes. As with other polarization measurements some post processing may be required to eliminate residual errors.

Fixsen, D. J.↗

Remote sensing of plasma injection and acceleration phenomena

Dynamics Explorer-1 High Altitude Plasma Instrument data have been used to investigate the injection of magnetosheath plasma into the polar cusp, the injection of auroral ion beams into the magnetosphere, and the acceleration of electrons transverse to the magnetic field direction, and the results are discussed. In the case of polar cusp plasmas, it is found that injection occurs at the high-latitude magnetopause, at geocentric distances near eight earth radii. In the case of auroral ion beams it is determined that ion bands are not produced by equatorial injection from the plasma sheet, but by the upward acceleration of ions from auroral acceleration regions. Finally, conical electron distributions are found to be consistent with transverse acceleration at altitudes of a thousand or more km, within or below the magnetic-field-aligned potential drops of the auroral acceleration regions.

Burch, J. L.↗

Trajectories of high energy electrons in a plasma focus

Measurements are made of high-energy electron trajectories in a plasma focus as functions of position, time, energy, and angle of emission. The spatial resolution of the X-ray emission shows that low-energy X-rays are emitted from the anode surface. It is also suggested that the highest energy X-rays originate from a small region on the axis. The so-called shadow technique shows that the electron beam is perpendicular to the anode surface. Polar diagrams of medium and high-energy X-rays agree with the bremsstrahlung emission from a relativistic electron beam, the current of which is several 100 A.

Harries, W. L.↗