Search NASA⌕ Search

SEARCH · Search NASA

Results for “CALCINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

A dual chelating sol–gel synthesis of BaTiO{sub 3} nanoparticles with effective photocatalytic activity for removing humic acid from water

Graphical abstract: The cubic phase BaTiO{sub 3} nanoparticles can be obtained at 600 °C and changed into tetragonal phase at 900 °C by a dual chelating sol–gel method, and the photocatalytic activities of the photocatalysts calcined at different temperatures were investigated by the removal of humic acid (HA) from water under UV light irradiation. Highlights: ► The humic acid in water was firstly degradated by BaTiO{sub 3} photocatalyst. ► The cubic BaTiO{sub 3} was obtained and changed into tetragonal phase at lower temperature. ► The chelating agents had an important influence on the phase formation of BaTiO{sub 3}. ► The tetragonal phase BaTiO{sub 3} calcined at 900 °C exhibited higher photocatalytic activity under UV irradiation. -- Abstract: In this paper, a dual chelating sol–gel method was used to synthesize BaTiO{sub 3} nanoparticles by using acetylacetone and citric acid as chelating agents. The samples calcined at different temperatures were analyzed by thermogravimetric and differential thermal analysis (TG-DTA), X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), scanning electron microscope (SEM) and UV–vis diffuse reflectance spectra (UV–vis). The results indicated that cubic phase BaTiO{sub 3} nanoparticles about 19.6 nm can be obtained at 600 °C and changed into tetragonal phase at 900 °C about 97.1 nm. All the BaTiO{sub 3} nanoparticles showed effective photocatalytic activities on the removal of humic acid (HA) under UV light irradiation. A comparison of single (acetylacetone or citric acid) and dual chelating (acetylacetone and citric acid) synthetic processes was also studied and the results demonstrated that the dual chelating agents indeed reduced phase transformation temperature from cubic to tetragonal BaTiO{sub 3}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aluminium doped ceria–zirconia supported palladium-alumina catalyst with high oxygen storage capacity and CO oxidation activity

Graphical abstract: Ce{sub 0.5}Zr{sub 0.3}Al{sub 0.2}O{sub 1.9}/Pd/γ-Al{sub 2}O{sub 3} possessed high OSC and CO oxidation activity at low temperature. - Highlights: • A new OSC material of Ce{sub 0.5}Zr{sub 0.3}Al{sub 0.2}O{sub 1.9}/Pd/γ-Al{sub 2}O{sub 3} is prepared via a mechanochemical method. • Ce{sub 0.5}Zr{sub 0.3}Al{sub 0.2}O{sub 1.9}/Pd/γ-Al{sub 2}O{sub 3} showed high OSC even after calcination at 1000 °C for 20 h. • Ce{sub 0.5}Zr{sub 0.3}Al{sub 0.2}O{sub 1.9}/Pd/γ-Al{sub 2}O{sub 3} exhibited the highest CO oxidation activity at low temperature correlates with enhanced OSC. - Abstract: The Ce{sub 0.5}Zr{sub 0.3}Al{sub 0.2}O{sub 1.9}/Pd-γ-Al{sub 2}O{sub 3} catalyst prepared by a mechanochemical route and calcined at 1000 °C for 20 h in air atmosphere to evaluate the thermal stability. The prepared Ce{sub 0.5}Zr{sub 0.3}Al{sub 0.2}O{sub 1.9}/Pd-γ-Al{sub 2}O{sub 3} catalyst was characterized for the oxygen storage capacity (OSC) and CO oxidation activity in automotive catalysis. For the characterization, X-ray diffraction, transmission electron microscopy and the Brunauer–Emmet–Teller (BET) technique were employed. The OSC values of all samples were measured at 600 °C using thermogravimetric-differential thermal analysis. Ce{sub 0.5}Zr{sub 0.3}Al{sub 0.2}O{sub 1.9}/Pd-γ-Al{sub 2}O{sub 3} catalyst calcined at 1000 °C for 20 h with a BET surface area of 41 m{sup 2} g{sup −1} exhibited the considerably high OSC of 583 μmol-O g{sup −1} and good OSC performance stability. The same synthesis route was employed for the preparation of the CeO{sub 2}/Pd-γ-Al{sub 2}O{sub 3} and Ce{sub 0.5}Zr{sub 0.5}O{sub 2}/Pd-γ-Al{sub 2}O{sub 3} for comparison.

36 MATERIALS SCIENCE↗

Preparation, characterization and applications of novel carbon and nitrogen codoped TiO{sub 2} nanoparticles from annealing TiN under CO atmosphere

Graphical abstract: Carbon and nitrogen codoped TiO{sub 2} nanoparticles were firstly fabricated by calcining TiN powder under CO atmosphere at different temperatures between 400 and 600 °C, both the improved photocatalytic activity for degradation of methylene blue and enhanced photovoltaic performance for dye sensitized solar cells were demonstrated. - Highlights: • CN-codoped TiO{sub 2} nanoparticles were prepared by calcining TiN under CO atmosphere. • More visible light response was confirmed by UV–vis DRS and photocatalytic results. • Enhanced conversion efficiency was observed for the DSSCs from CN-TiO{sub 2} photoanode. • CN-codoping played an important role to improve the photocatalytic performance. - Abstract: Carbon and nitrogen codoped titania (CN-TiO{sub 2}) nanoparticles were fabricated by calcining titanium nitride (TiN) nanoparticles under carbon monoxide (CO) atmosphere at four different temperatures in a range of 400–600 °C. The as-prepared samples were characterized with X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM) and X-ray photoelectron spectroscopy (XPS). Enhanced light absorption in both the UV and visible light region was observed for the resulted CN-TiO{sub 2} nanoparticles in ultraviolet-visible diffuse reflectance spectroscopy (UV–vis DRS). Improved photocatalytic activity toward the degradation of methylene blue by the CN-TiO{sub 2} nanoparticles was demonstrated under UV and visible light, respectively. The highest degradation rate was achieved for CN-TiO{sub 2} nanoparticles (13%) compared to N-TiO{sub 2} (10%) and the commercial P25 (5%) under visible light illumination for 40 min. Furthermore, the improved photocatalytic activity of CN-TiO{sub 2} was also confirmed by the degradation of colorless resorcinol under UV–vis light irradiation. Dye-sensitized solar cells (DSSCs) were fabricated using P25, N-TiO{sub 2} and CN-TiO{sub 2} photoanodes, respectively. The highest conversion efficiency of 3.31% was achieved by the DSSCs based on the CN-TiO{sub 2} photoanodes in comparison with the commercial P25 (1.61%) and N-TiO{sub 2} (2.44%) photoanodes. This work demonstrates that thermal treatment of TiN nanoparticles under CO atmosphere has shown to be a rapid, direct and clean approach to synthesize photocatalysts with enhanced photocatalytic and photovoltaic performance.

36 MATERIALS SCIENCE↗

MgCoAl and NiCoAl LDHs synthesized by the hydrothermal urea hydrolysis method: Structural characterization and thermal decomposition

Highlights: • We synthesized MgCoAl and NiCoAl LDHs by the urea hydrolysis method. • Aluminum rich and crystalline materials have been formed. • The calcination of the LDHs generated mixed oxides with high surface areas. - Abstract: Layered double hydroxides (LDHs) with Mg/Co/Al and Ni/Co/Al were synthesized for the first time by the urea hydrolysis method. The experimental conditions promoted aluminum rich and crystalline materials. The formation of LDHs was investigated by powder X-ray diffraction (XRD), chemical analysis, solid state nuclear magnetic resonance with magic angle spinning ({sup 27}Al-MAS-NMR), simultaneous thermogravimetric/differential thermal analysis (TGA/DTA), FTIR spectroscopy, scanning electron microscopy (SEM), and N{sub 2} adsorption–desorption experiments. A single phase corresponding to LDH could be obtained in all the investigated compositions. Thermal calcination of these LDHs at 500 °C resulted in the formation of solid solutions in which Al{sup 3+} was dissolved. All the calcined materials have rock-salt like structures and high surface areas.

36 MATERIALS SCIENCE↗

Synthesis and characterization of novel Ce{sub 0.8}Sm{sub 0.2}Fe{sub 0.9}Ir{sub 0.03}Co{sub 0.07}O{sub 3−δ} perovskite material and possible application as a cathode for low–intermediate temperature SOFCs

Highlights: • Ce{sub 0.8}Sm{sub 0.2}Fe{sub 0.9}Ir{sub 0.03}Co{sub 0.07}O{sub 3−δ} was synthesized using sol–gel methods. • Material was thoroughly characterized using Raman, FTIR, XRD, HRTEM, SEM, and TGA. • Electrochemical performance showed the materials are a promising new cathode material for low temperature SOFC. - Abstract: A novel perovskite material, Ce{sub 0.8}Sm{sub 0.2}Fe{sub 0.9}Ir{sub 0.03}Co{sub 0.07}O{sub 3−δ} was synthesized using a sol–gel technique. The materials were calcined at temperatures of 800 °C, 900 °C, and 1000 °C and then characterized using X-ray diffraction, Raman and infrared spectroscopy, high resolution transmission electron microscopy and scanning electron microscopy (SEM). The particle sizes and crystallite sizes increased with increasing calcination temperature and formed perovskite type materials with some separate magnetite and iridium oxide. The powders were used to assemble button cells using samarium doped ceria as the electrolyte and NiO/SDC as the anode materials. The electrochemical properties were investigated using a Fiaxell open flanges test set-up and a Nuvant™ Powerstat-05 potentiostat/galvanostat. The Ce{sub 0.8}Sm{sub 0.2}Fe{sub 0.9}Ir{sub 0.03}Co{sub 0.07}O{sub 3−δ} cathode material calcined at 1000 °C exhibited the most promising performance, with a maximum power density of 0.400 W/cm{sup 2}, a current density of 0.8 A/cm{sup 2}, and a corresponding area specific resistance of 0.247 Ωcm{sup 2} at 500 °C. The button cells were reasonably stable over15 h.

36 MATERIALS SCIENCE↗

Facile room temperature CTAB-assisted synthesis of mesoporous nano-cobalt ferrites for enhanced magnetic behaviour

Highlights: • Synthesis of mesoporous nano-cobalt ferrites are carried out CTAB medium. • Crystalline cobalt ferrite phase was formed below CMC of CTAB. • Bilayer arrangement of CTA-OH-Fe-Co growing units leads to inter-particle pores. • Enhanced magnetic properties (M{sub s} and H{sub c}) were obtained in synthesized cobalt ferrites. - Abstract: We report a facile, room temperature synthesis of nanostructured mesoporous cobalt ferrites using the cationic surfactant, cetyltrimethylammonium bromide (CTAB). The synthesis was carried out at various concentrations of CTAB ranging from its pre- to post-micellar concentrations. The pristine and calcined samples exhibit pure cobalt ferrite phase which are confirmed by XRD studies. The morphology of all uncalcined samples was quasi-spherical as shown by TEM images. Nitrogen adsorption – desorption study on pristine samples indicates the presence of mesopores in them. The magnetic properties of the uncalcined and calcined samples were studied by vibrating sample magnetometry. Coercivity and saturation magnetization were found to vary with the concentration of the CTAB employed. Also, the pristine samples were soft magnets, whereas the calcined samples tended towards exhibiting hard magnetism. We have proposed a mechanism to explain the mesoporosity of nanostructured ferrite based the role of CTAB in the present synthetic method.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preparation and photocatalytic property of porous α-Fe2O3 nanoflowers

Highlights: • Porous α-Fe{sub 2}O{sub 3} nanoflowers were successfully prepared by calcining Fe{sub 3}S{sub 4} precursor. • The crystal structures, pore sizes and surface areas could be tuned through changing heat-treating temperatures. • The highest MO photocatalytic degradation efficiency could be up to more than 99% within 40 min. - Abstract: Porous α-Fe{sub 2}O{sub 3} nanoflowers were successfully prepared by calcining Fe{sub 3}S{sub 4} precursor. The crystal structures, pore sizes and surface areas of the samples could be tuned through changing heat-treating temperatures. The samples calcined at 600 °C exhibited the highest photocatalytic activity for the degradation of methyl orange (MO) under visible light irradiation, which showed a degradation efficiency of more than 99% within 40 min. The enhanced photocatalytic activity could be attributed to its porous hierarchical structure which could promote light absorption efficiency, largely decrease the distance of charge carriers moving to solution and enlarge its specific surface area. This simple and scalable strategy can also be extended to other porous metal oxide nanostructures for photocatalytic applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preparation of amorphous copper - chromium oxides catalysts for selective oxidation of cyclohexane

In this work, amorphous copper-chromium catalysts with different Cu/Cr molar ratios have been prepared by a sol-gel method and were used in the oxidation of cyclohexane to KA-oil. The catalysts have been characterized by a variety of analytical techniques including XRD, XPS, Raman, FT-IR, BET, TEM and SEM. XRD results confirmed that the formation of amorphous structure. Here, the XPS and Raman results indicated that most of Cu species existed in well-dispersed tetrahedral coordination before calcination. After calcination, the tetrahedrally coordinated Cu ions are transformed into octahedral coordination and the activity of catalyst is significantly reduced. The results show that the tetrahedrally coordinated Cu ions play the synergistic catalytic role with Cr ions. Interestingly, oxidation of cyclohexane is more inclined to produce cyclohexanol with uncalcined catalyst due to the presence of the tetrahedrally coordinated Cu ions; however, the appearance of surface lattice oxygen makes the reaction more conducive to cyclohexanone after calcination. After optimizing conditions, Cu-Cr oxide catalyst with the molar ratio 1:1 shows the highest activity, which obtains 62.2% yield and 92.4% selectivity for KA-oil using H 2 O 2 as oxygen source.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Composition and Structure of Mg/Al Oxides on Their Activity and Selectivity for the Condensation of Methyl Ketones

The results of chemical composition and pretreatment on Mg-Al hydrotalcites and alumina-supported MgO were evaluated for the gas-phase, self-condensation reaction of C 3 -C 5 biomass-derived methyl ketones. We demonstrate that the selectivity toward the acyclic dimer enone and the cyclic enone trimer can be tuned by controlling the temperature of hydrotalcite calcination. Methyl ketone cyclization is promoted by Lewis acidic sites present on the hydrotalcite catalysts. XRD and thermal decomposition analysis reveal that the formation of periclase MgO starts above 623 K accompanied by complete disappearance of the hydrotalcite structure and is accompanied by an increase in hydroxyl condensation as the formation of well-crystallized periclase. 27 Al MQMAS and 25 Mg MAS NMR show that at progressively higher temperatures, Al 3+ cations diffuses out of the octahedral brucite layers and incorporate into the tetrahedral and octahedral sites of the MgO matrix thereby creating defects to compensate the excess positive charge generated. The oxygen anions adjacent to the Mg 2+ /Al 3+ defects become coordinatively unsaturated, leading to the formation of new basic sites. A kinetic isotope effect, k H / k D = 0.96, is observed at 473 K for the reaction of (CH 3 ) 2 CO versus (CD 3 ) 2 CO, which suggests that carbon-carbon bond formation leading to the dimer aldol product is the rate-determining step in the condensation reaction of methyl ketones. Furthermore, we show that acid-base catalysts having similar reactivity and higher hydrothermal stability to that of calcined hydrotalcites can be achieved by creating defects in MgO crystallites supported alumina as a consequence of the diffusion of Al 3+ cations into MgO. The physical properties of these materials are shown to be very similar to those of hydrotalcite calcined at 823 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct spectroscopic evidence for isolated silanols in SiO x /Al 2 O 3 and their formation mechanism

Here, the preparation and unambiguous characterization of isolated Brønsted-acidic silanol species on silica–alumina catalysts presents a key challenge in the rational design of solid acid catalysts. In this report, atomic layer deposition (ALD) and liquid-phase preparation (chemical liquid deposition, CLD) are used to install the SiO x sites on Al 2 O 3 catalysts using the same Si source (tetraethylorthosilicate, TEOS). The ALD-derived and CLD-derived SiO x sites are probed with dynamic nuclear polarization (DNP)-enhanced 29 Si– 29 Si double-quantum/single-quantum (DQ/SQ) correlation NMR spectroscopy. The investigation reveals conclusively that the SiO x /Al 2 O 3 material prepared by ALD and CLD, followed by calcination under an O 2 stream, contains fully spatially isolated Si species, in contrast with those resulting from the calcination under static air, which is widely accepted as a postgrafting treatment for CLD. Insight into the formation mechanism of these sites is obtained via in situ monitoring of the TEOS + γ-Al 2 O 3 reaction in an environmental diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) cell. Upon calcination, the DRIFTS spectra of SiO x /Al 2 O 3 reveal a signature unambiguously assignable to isolated Brønsted-acidic silanol species. Surprisingly, the results of this study indicate that the method of preparing SiO x /Al 2 O 3 catalysts is less important to the final structure of the silanol sites than the post-treatment conditions. This finding should greatly simplify the methods for synthesizing site-isolated, Brønsted-acidic SiO x /Al 2 O 3 catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modification of Catalytic Properties of Hollandite Manganese Oxide by Ag Intercalation for Oxidative Acetalization of Ethanol to Diethoxyethane

The effect of addition of Ag to the catalytic properties of hollandite manganese oxide (HMO) was investigated for the oxidative acetalization of ethanol to diethoxyethane. Based on analysis with HRTEM, XRD, and EXAFS, Ag introduced onto HMO by deposition/precipitation was found to be present in different forms in the final catalyst depending on the calcination temperature. It could exist as nanoparticles on the outside surface of HMO nanorods for samples calcined at 60 °C, and as Ag atoms intercalated into the tunnels of the HMO structure for samples calcined at 500 °C. NH 3 desorption results showed that intercalation of Ag resulted in stronger Lewis acidic sites on HMO, which DFT computational results suggested to be due to Ag-induced electron redistribution in the HMO framework. Here, the intercalation of Ag atoms also made the HMO more easily reducible by lowering the H 2 reduction temperature from 500 to 200 °C. Consequently, the sample with intercalated Ag was more active for ethanol oxidation to acetaldehyde, achieving nearly 100% conversion of ethanol and acetaldehyde by 360 °C, and acetalization of acetaldehyde with ethanol to produce diethoxyethane selectively, resulting in 93.5% diethoxyethane yield, which was 10% higher than with samples containing Ag nanoparticles on HMO. This study demonstrated a little-studied phenomenon in which a metal alters the catalytic properties of an oxide electronically but not structurally and without direct participation in the reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic roles of Co0 and Co2+ during steam reforming of ethanol on Co/MgO catalysts

Abstract: The catalytic roles of Co0 and Co2+ during steam reforming of ethanol were investigated over Co/MgO catalysts. Catalysts with different Co0/(Co0+Co2+) fraction were prepared through calcination and/or reduction at different temperatures, and the Co0 fraction was quantified by TPR and in-situ XPS. High temperature calcination of Co/MgO allowed us to prepare catalysts with more non-reducible Co2+ incorporated in the MgO lattice, while lower calcination temperatures allowed for the preparation of catalysts with higher Co0/(Co0+Co2+) fractions. The catalytic tests on Co0, non-reducible Co2+, and reducible Co2+ indicated that Co0 is much more active than either reducible or non-reducible Co2+ for C-C cleavage and water gas shift reaction. In addition, catalysts with a higher Co0 surface fraction exhibited a lower selectivity to CH4.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Steam-Coal Gasification Using CaO and KOH for in Situ Carbon and Sulfur Capture

We present experimental results of coal gasification with and without the addition of calcium oxide and potassium hydroxide as dual-functioning catalyst-capture agents. Using two different coal types and temperatures between 700 and 900 °C, we studied the effect of these catalyst-capture agents on (1) the syngas composition, (2) CO 2 and H 2 S capture, and (3) the steam-coal gasification kinetic rate. The syngas composition from the gasifier was roughly 20% methane, 70% hydrogen, and 10% other species when a CaO/C molar ratio of 0.5 was added. We demonstrated significantly enhanced steam–coal gasification kinetic rates when adding small amounts of potassium hydroxide to coal when operating a CaO-CaCO 3 chemical looping gasification reactor. For example, the steam–coal gasification kinetic rate increased 250% when dry mixing calcium oxide at a Ca/C molar ratio of 0.5 with a sub-bituminous coal, and the kinetic rate increased 1000% when aqueously mixing calcium oxide at a Ca/C molar ratio of 0.5 along with potassium hydroxide at a K/C molar ratio of 0.06. In addition, we conducted multi-cycle studies in which CaCO 3 was calcined by heating to 900 °C to regenerate the CaO, which was then reused in repeated CaO-CaCO 3 cycles. The increased steam-coal gasification kinetics rates for both CaO and CaO + KOH persisted even when the material was reused in six cycles of gasification and calcination. The ability of CaO to capture carbon dioxide decreased roughly 2-4% per CaO-CaCO 3 cycle. We also discuss an important application of this combined gasifier-calciner to electricity generation and selling the purge stream as a precalcined feedstock to a cement kiln. In this scenario, the amount of purge stream required is fixed not by the degradation in the capture ability but rather by the requirements at the cement kiln on the amount of CaSO 4 and ash in the precalcined feedstock.

01 COAL, LIGNITE, AND PEAT↗

The sol–gel autocombustion as a route towards highly CO 2 -selective, active and long-term stable Cu/ZrO 2 methanol steam reforming catalysts

The adaption of the sol-gel autocombustion method to the Cu/ZrO 2 system opens new pathways for the specific optimisation of the activity, long-term stability and CO 2 selectivity of methanol steam reforming (MSR) catalysts. Calcination of the same post-combustion precursor at 400 °C, 600 °C or 800 °C allows accessing Cu/ZrO 2 interfaces of metallic Cu with either amorphous, tetragonal or monoclinic ZrO 2 , influencing the CO 2 selectivity and the MSR activity distinctly different. While the CO 2 selectivity is less affected, the impact of the post-combustion calcination temperature on the Cu and ZrO 2 catalyst morphology is more pronounced. A porous and largely amorphous ZrO 2 structure in the sample, characteristic for sol-gel autocombustion processes, is obtained at 400 °C. This directly translates into superior activity and long-term stability in MSR compared to Cu/tetragonal ZrO 2 and Cu/monoclinic ZrO 2 obtained by calcination at 600 °C and 800 °C. The morphology of the latter Cu/ZrO 2 catalysts consists of much larger, agglomerated and non-porous crystalline particles. Based on aberration-corrected electron microscopy, we attribute the beneficial catalytic properties of the Cu/amorphous ZrO 2 material partially to the enhanced sintering resistance of copper particles provided by the porous support morphology.

36 MATERIALS SCIENCE↗

Morphology-driven oxygen evolution performance of NiO x nanostructures and implications for hole transport in perovskite solar cells

Morphology-controlled nanostructures provide an effective strategy to modulate both oxygen evolution reaction (OER) activity and photovoltaic performance in perovskite solar cells (PSCs). However, achieving low OER overpotentials and high power conversion efficiency (PCE) simultaneously through morphology engineering remains challenging. In this work, nickel oxide (NiO x ) nanostructures with spindle-like (NiO x -NS) and plate-like (NiO x -NP) morphologies were synthesized and evaluated as bi-functional OER catalysts and hole transport layers (HTLs) in inverted PSCs. Structural and thermal analyses reveal that NiO x -NS crystallizes into a cubic phase at a lower temperature (300 °C), whereas NiO x -NP requires higher calcination temperatures, reflecting differences in precursor microstructure. Electrochemical measurements indicate that NiO x -NS calcined at 300 °C delivers the lowest OER overpotential (395 mV at 10 mA cm −2 ), outperforming NiO x -NP calcined at 400 °C (565 mV) and 500 °C (474 mV). This enhanced activity is ascribed to favorable surface strain, increased defect density, and advantageous facet exposure. When used as HTLs, NiO x -NS also delivers the highest PCE (13.25%) among all tested devices, exceeding those based on NiO x -NP and commercial NiO x , owing to improved hole extraction and interfacial contact. Overall, this study highlights the importance of morphology control and thermal processing in tailoring NiO x for multifunctional nanomaterials in electrocatalytic and photovoltaic applications.

36 MATERIALS SCIENCE↗

A co-precipitation preparation, crystal structure and photoluminescent properties of Er5%:Gd{sub 2}O{sub 3} nanorods

An inexpensive preparation method is being reported for obtaining erbium doped gadolinium oxide (Er5%:Gd{sub 2}O{sub 3}) nanoscale rods. The elongated nanoscale systems, as-formed through a co-precipitation process, are characterized by using X-ray powder diffraction (XRD) patterns, scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) mapping, Ultra Violet-visible (UV-vis.) absorption spectroscopy and photoluminescence (PL) spectroscopy. In addition, the Williamson–Hall (W–H) plot is also performed to distinguish the effect of crystalline size-induced broadening and strain-induced broadening at full-width at half-maximum (FWHM) of the XRD profile. The XRD patterns of as-formed and calcined products show that the phase confirmation. As revealed from the SEM micrographs, the morphology of the products show that the rod-like nanoparticles. The EDX micrographs show that the presence of elements in our samples. The band gap values in calcined samples are found to be in the range of 3.569 eV. Upon 230 nm excitation on calcined samples, three broad emission peaks are observed from PL studies. The possible mechanism for the formation of Er5%:Gd{sub 2}O{sub 3} nanorods is briefly discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cubic phase stability, optical and magnetic properties of Cu-stabilized zirconia nanocrystals

By means of experimental and ab initio investigations, in this article we report on the cubic phase stability of Cu doped zirconia (ZrO 2 ) at room temperature, and further characterize its structural, optical and magnetic properties. Various compositions of Zr 1– x Cu x O 2 (0.01 ≤ x ≤ 0.25) nanocrystallites of average size ~16 nm were synthesized using co-precipitation technique. Thermal analysis and kinetics of crystallization revealed that the cubic phase at ambient temperature can be stabilized by using a critical calcination temperature of 500 °C for 8 h in air and a critical composition of $x_c$ = 0.10 ± 0.05. For $x < x_c$, some undigested monoclinic phase of ZrO 2 exists together with the cubic structure. However, for $x > x_c$, the monoclinic CuO emerges as a secondary phase with shrinkage of unit-cell volume with increasing the Cu content. At x = 0.05 and 500 °C calcination temperature, we observe a high degree of cubic crystallinity which breaks down into monoclinic phase with increasing calcination temperature beyond 550 °C. Electron magnetic resonance studies provide evidence for the substitution of Cu 2+ ( 2 D 5/9 ,3d 9 ) ions at Zr 4+ sites with g ∥ = 2.250, g ⊥ = 2.018 and average g a = (g ∥ + 2g ⊥ )/3 ~ 2.1. The temperature dependence of magnetic susceptibility measurements from 2 K to 300 K exhibits Curie–Weiss behaviour whose analysis using g a = 2.1 and spin S = 1/2 yields x = 0.028 and x = 0.068 for the nominal x = 0.05 and x = 0.20 samples, respectively. This magnetic analysis confirms the findings from x-ray diffraction that only a part of Cu is successfully doped into cubic phase of Cu-doped ZrO 2 . The optical bandgap decreases with increasing x, which is due to the emergence of Cu-d states at Fermi-level near the valence bands, thus making Cu-doped zirconia a hole doped (p-type) semiconductor.

electron spin resonance↗

Diffuse Reflectance Spectroscopy and Principal Component Analysis to Retrospectively Determine Production History of Plutonium Dioxide

Diffuse reflectance spectroscopy measurements in the shortwave infrared (930–1600 nm) spectral region were acquired for Pu 2 (C 2 O 4 ) 3 •9H 2 O and its thermal decomposition product, PuO 2 . We analyzed a total of eight PuO 2 samples that were produced at different calcination temperatures (300, 350, 450, 525, 600, 675, 750, and 900 °C). Our goal was to identify spectroscopic fingerprints that could be used to gain retrospective information regarding the production parameters of these important nuclear compounds. The diffuse reflectance spectrum of Pu 2 (C 2 O 4 ) 3 •9H 2 O features several broad bands that currently preclude detailed analysis. However, all PuO 2 samples produced relatively sharp spectral features that got sharper and more intense for samples that were produced at higher calcination temperatures. The electronic band observed at 1433 nm in the diffuse reflectance spectra of PuO 2 was found to be a sensitive indicator of crystallinity; a result that is corroborated by ancillary Raman spectroscopy measurements. Principal component analysis of diffuse reflectance spectra was able to clearly rank and categorize PuO 2 samples based on the calcination temperature that was employed during their production. Thus, we show herein that important retrospective information pertaining to the process history of PuO 2 can be gained through the relatively simplistic combination of diffuse reflectance spectroscopy and principal component analysis. This discovery presents a new method for determining the provenance and process history of PuO 2 and should have an impact in the fields of nuclear forensics and nuclear nonproliferation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗