Search NASA⌕ Search

SEARCH · Search NASA

Results for “CONTAMINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

XPS analysis of molecular contamination and sp 2 amorphous carbon on oxidized (100) diamond

The efficacy of oxygen (O) surface terminations on diamond is an important factor for the performance and stability for diamond-based quantum sensors and electronics. Given the wide breadth of O-termination techniques, it can be difficult to discern which method would yield the highest and most consistent O coverage. Furthermore, the interpretation of surface characterization techniques is complicated by surface morphology and purity, which if not accounted for will yield inconsistent determination of the oxygen coverage. We present a comprehensive approach to consistently prepare and analyze oxygen termination of surfaces on (100) single-crystalline diamond. We report on x-ray photoelectron spectroscopy (XPS) characterization of diamond surfaces treated with six oxidation methods that include various wet chemical oxidation techniques, photochemical oxidation with UV illumination, and steam oxidation using atomic layer deposition (ALD). Our analysis entails a rigorous XPS peak-fitting procedure for measuring the functionalization of O-terminated diamond. The findings herein have provided molecular-level insights on oxidized surfaces in (100) diamond, including the demonstration of clear correlation between the measured oxygen atomic percentage and the presence of molecular contaminants containing nitrogen, silicon, and sulfur. We also provide a comparison of the sp 2 carbon content with the O1s atomic percentage and discern a correlation with the diamond samples treated with dry oxidation which eventually tapers off at a max O1s atomic percentage value of 7.09 ± 0.40%. Given these results, we conclude that the dry oxidation methods yield some of the highest oxygen amounts, with the ALD water vapor technique proving to be the cleanest technique out of all the oxidation methods explored in this work.

XPS↗
DOE OSTI2025

The overlooked interaction of emerging contaminants and microbial communities: a threat to ecosystems and public health

Abstract Context and aims Emerging contaminants (ECs) and microbial communities should not be viewed in isolation, but through the One Health perspective. Both ECs and microorganisms lie at the core of this interconnected framework, as they directly influence the health of humans, animals, and the environment. The interactions between ECs and microbial communities can have profound implications for public health, affecting all three domains. However, these ECs-microorganism interactions remain underexplored, potentially leaving significant public health and ecological risks unrecognized. Therefore, this article seeks to alert the scientific community to the overlooked interactions between ECs and microbial communities, emphasizing the pivotal role these interactions may play in the management of ‘One Health.’ Results The most extensively studied interaction between ECs and microbial communities is biodegradation. However, other more complex and concerning interactions demand attention, such as the impact of ECs on microbial ecology (disruptions in ecosystem balance affecting nutrient and energy cycles) and the rise and spread of antimicrobial resistance (a growing global health crisis). Although these ECs-microbial interactions had not been extensively studied, there are scientific evidence that ECs impact on microbial communities may be concerning for public health and ecosystem balance. Conclusions So, this perspective summarizes the impact of ECs through a One Health lens and underscores the urgent need to understand their influence on microbial communities, while highlighting the key challenges researchers must overcome. Tackling these challenges is vital to mitigate potential long-term consequences for both ecosystems and public health.

Gomes, Inês B. (ORCID:0000000207313662)↗
DOE OSTI2020

Validation of selection function, sample contamination and mass calibration in galaxy cluster samples

ABSTRACT We construct and validate the selection function of the MARD-Y3 galaxy cluster sample. This sample was selected through optical follow-up of the 2nd ROSAT faint source catalogue with Dark Energy Survey year 3 data. The selection function is modelled by combining an empirically constructed X-ray selection function with an incompleteness model for the optical follow-up. We validate the joint selection function by testing the consistency of the constraints on the X-ray flux–mass and richness–mass scaling relation parameters derived from different sources of mass information: (1) cross-calibration using South Pole Telescope Sunyaev-Zel'dovich (SPT-SZ) clusters, (2) calibration using number counts in X-ray, in optical and in both X-ray and optical while marginalizing over cosmological parameters, and (3) other published analyses. We find that the constraints on the scaling relation from the number counts and SPT-SZ cross-calibration agree, indicating that our modelling of the selection function is adequate. Furthermore, we apply a largely cosmology independent method to validate selection functions via the computation of the probability of finding each cluster in the SPT-SZ sample in the MARD-Y3 sample and vice versa. This test reveals no clear evidence for MARD-Y3 contamination, SPT-SZ incompleteness or outlier fraction. Finally, we discuss the prospects of the techniques presented here to limit systematic selection effects in future cluster cosmological studies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

New physics contamination to precision luminosity measurements at future 𝑒 +⁢ 𝑒 − colliders

Several key observables of the high-precision physics program at future lepton colliders will critically depend on the knowledge of the absolute machine luminosity. The determination of the luminosity relies on the precise knowledge of some reference process, which is, in principle, not affected by unknown physics, so that its cross section can be computed within a well-established theory, like the Standard Model. Quantifying the uncertainties induced by possible new physics effects on such processes is, therefore, crucial. We present an investigation of light and heavy new physics contributions to the small-angle Bhabha process at future 𝑒 + ⁢𝑒 − colliders, and we discuss possible strategies to remove the contamination due to heavy degrees of freedom by relying on observables that are independent of the absolute luminosity.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

GaAs Solar Cells Grown on Intentionally-Contaminated GaAs Substrates

III-V solar cells have the best performance of any semiconductor materials, but deposition of these materials relies on high-quality single crystal GaAs wafers for their superior performance. Unfortunately, the cost of these wafers makes these high-efficiency devices only accessible in high-value or niche markets. Here, we explored the effect of growing bulk GaAs crystals with lower purity input materials in order to reduce their cost. We observe that intentional impurities added to the melt before the crystal growth occurs segregate to the top of the boule. Single junction GaAs solar cells grown on wafers made from contaminated boules showed no performance degradation compared to a high-purity control wafer. These results suggest that lower purity Ga and As source materials can be used during crystal growth to reduce the cost of wafers.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2021

Measured influence of overhead HVAC on exposure to airborne contaminants from simulated speaking in a meeting and a classroom

Tracer gas experiments were conducted in a 158 m 3 room with overhead supply diffusers to study dispersion of contaminants from simulated speaking in physically distanced meeting and classroom configurations. The room was contained within a 237 m 3 cell with open plenum return to the HVAC system. Heated manikins at desks and a researcher operating the tracer release apparatus presented 8-9 thermal plumes. Experiments were conducted under conditions of no forced air and neutral, cooled, or heated air supplied at 980-1100 cmh, and with/out 20% outdoor air. CO 2 was released at the head of one manikin in each experiment to simulate small (< 5 µm diameter) respiratory aerosols. The metric of exposure relative to perfectly mixed (ERM) is introduced to quantify impacts, based on measurements at manikin heads and at three heights in the center and corners of the room. Chilled or neutral supply air provided good mixing with ERMs close to one. Thermal stratification during heating produced higher ERMs at most manikins: 25% were ≥ 2.5 and the highest were > 5× perfectly mixed conditions. Operation of two within-zone air cleaners together moving ≥400 cmh vertically in the room provided enough mixing to mitigate elevated exposure variations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Effects of Water Contamination on Micropitting and Rolling Contact Fatigue of Bearing Steels

Abstract In this research, the effects of water contamination in oil were investigated on two kinds of failures that occur in bearing steel: micropitting and rolling contact fatigue. Whereas the presence of water in the oil had little effect on the generation of surface wear in these experiments, increases in the occurrences of micropitting and rolling contact fatigue were observed due to the presence of either dissolved or free water in lubricants. Additionally, the presence of white etching matter at crack interfaces was observed and evaluated. The experimental results showed that water content can be considered as a significant factor that accelerates the formation of micropitting and fatigue cracks in rolling bearings.

Engineering↗
DOE OSTI2026

Comparative physiological and genomic characterization of a novel Nitrobacter vulgaris strain from a nitrate-contaminated subsurface

Nitrite-oxidizing bacteria (NOB) represent a crucial node in the global nitrogen cycle. By catalyzing the second step of nitrification—the oxidation of nitrite to nitrate to generate energy for growth—NOB activity controls the fate of nitrite (NO 2 - ) in aerobic environments. Despite thriving in diverse environments, including soils, freshwater, marine ecosystems, subsurface habitats, and water treatment systems, organisms capable of nitrite oxidation are confined to Nitrobacter, Nitrospira, Nitrospina, Nitrotoga, and a few other specific lineages. The genus Nitrobacter, recognized for its facultative heterotrophic metabolism, is often associated with high-nitrogen environments. Here, we report the physiological characterization of a novel strain, Nitrobacter vulgaris strain MLSD-S22, isolated from a nitrate- and heavy-metal-contaminated subsurface. Growth inhibition experiments revealed that strain MLSD-S22 and the N. vulgaris type strain Z exhibited similar sensitivities to nitrite and nitrate, with nitrite being the most inhibitory. Microrespirometry demonstrated that the two N. vulgaris strains and Nitrobacter winogradskyi Nb-255 possessed higher affinities for nitrite and oxygen than previously reported for Nitrobacter, suggesting potential to compete in low-substrate environments. Long-read DNA sequencing provided a complete genome for strain MLSD-S22, revealing two plasmids and an intact nitrous oxide (N 2 O) reduction operon—an unexpected feature for Nitrobacter. While N 2 O reduction activity was not observed under the tested conditions, this discovery raises questions about the contribution of Nitrobacter NOB to the N 2 O sink. These findings broaden the physiological and genomic diversity of Nitrobacter, offering new insights into their adaptation strategies and providing a framework for future evaluation of their potential roles in nitrogen loss.

Nitrobacter↗
DOE OSTI2024

Shotgun metagenomics analysis indicates Bradyrhizobium spp. as the predominant genera for heavy metal resistance and bioremediation in a long-term heavy metal-contaminated ecosystem

ABSTRACT Ten soil cores were collected from the long-term heavy metal-contaminated Savannah River Site (SRS) and studied using shotgun metagenomics. In-line with our previous reports, Bradyrhizobium spp. dominated the SRS soils, and thus we recommend that SRS bioremediation studies target the Bradyrhizobium genus.

Agashe, Rohan↗
DOE OSTI2023

Complete genome sequence of Cellulomonas sp., strain ES6, a chromate-reducing bacterium isolated from chromium-contaminated subsurface sediment

ABSTRACT Cellulomonas sp. strain ES6 is a chromate-reducing bacterium isolated from chromium contaminated subsurface sediment. Illumina MiSeq and Oxford Nanopore sequencing were used to assemble the genome sequence which consisted of a single circular chromosome of 4.13 Mb, contained 3,960 protein encoding genes and with an overall G + C content 75.38%.

Perea, Katheryn R.↗
DOE OSTI2022

Genomic Features and Pervasive Negative Selection in Rhodanobacter Strains Isolated from Nitrate and Heavy Metal Contaminated Aquifer

Despite the dominance of Rhodanobacter species in the subsurface of the contaminated Oak Ridge Reservation (ORR) site, very little is known about the mechanisms underlying their adaptions to the various stressors present at ORR. Recently, multiple Rhodanobacter strains have been isolated from the ORR groundwater samples from several wells with varying geochemical properties.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Implementation of stacked ensemble machine learning for the detection of surrogate plutonium contamination in soil via LIBS

Supervised machine learning methods have demonstrated increased utility for the quantification of lanthanide and actinide elements in atomic spectroscopy applications. This study implements laser-induced breakdown spectroscopy (LIBS) for the identification of plutonium surrogate material (CeO 2 ) in soil matrices by training supervised machine learning methods on the recorded spectral data. A bagged ensemble using Random Forest yields the highest sensitivity predictions with a detection limit of 0.015 wt.% CeO 2 . However, high precision in Ce content prediction required the use of a stacked ensemble regression, which provided the superlative Ce quantification model with an error of 0.107% and a detection limit of 0.022 wt.%. Furthermore, the high performance of the stacked ensemble demonstrates its potential to enhance the accuracy and sensitivity of nuclear contaminant detection using field-deployable spectroscopic analyzers in real-world scenarios.

47 OTHER INSTRUMENTATION↗