Search NASA⌕ Search

SEARCH · Search NASA

Results for “CORROSION RESISTANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Atomic-Scale Insights into Carbon Dissolution in α-, γ-, and θ-Al 2 O 3 : Phase-dependent Transport Dynamics from First-Principles Calculations

α-Al 2 O 3 exhibits superior carburizing corrosion resistance compared to metastable γ-Al 2 O 3 and θ-Al 2 O 3 phases in high-temperature CO 2 environments, yet its atomic-scale origins remain unclear. Using first-principles density functional theory, we systematically investigate carbon dissolution and diffusion in α-Al 2 O 3 , γ-Al 2 O 3 , and θ-Al 2 O 3 , including the effects of oxygen (O) and aluminum (Al) vacancies. Our results show that α-Al 2 O 3 consistently exhibits higher carbon solution enthalpies than γ-Al 2 O 3 and θ-Al 2 O 3 in both pristine and defective structures, indicating lower intrinsic carbon solubility in α-Al 2 O 3 . Vacancies significantly enhance carbon incorporation: O vacancies reduce solution enthalpy, while Al vacancies further amplify this effect, with a strong preference for carbon at Al vacancy sites. Carbon diffusion barriers are also highest in α-Al 2 O 3 , reflecting slower carbon mobility. Al vacancies increase diffusion barriers across all phases, while O vacancies raise barriers in α- and γ-Al 2 O 3 but slightly lower them in θ-Al 2 O 3 . These results reveal a dual mechanism behind the carburizing resistance of α-Al 2 O 3 : reduced carbon solubility and elevated diffusion barriers. Furthermore, this work provides atomic-scale insights to guide the design of alumina-based materials with improved carburizing resistance through phase selection and defect engineering.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Amine Structure Governs Corrosion Rates of Copper Catalysts in Electrochemical Reactive Capture of CO 2

Reactive capture of CO 2 (RCC) offers an integrated approach that combines CO 2 capture with its direct electrochemical conversion, eliminating the need for CO 2 release from the capture agent. By avoiding the pH, pressure, and temperature swings required for the release step, RCC has the potential to reduce both energy consumption and capital costs compared to the conventional sequential process of CO 2 capture, release, concentration, and conversion. Amines, widely used in industrial CO 2 capture, face challenges in RCC systems due to their incompatibility with transition metal catalysts as well as their tendency to promote electrode corrosion and parasitic hydrogen evolution. Identifying suitable combinations of amines and catalysts is therefore critical to enabling integrated CO 2 capture and conversion. Here, this work systematically investigates the performance of four primary and four secondary amines for RCC on polycrystalline Cu catalysts. Among the eight tested amines, only dimethylamine showed no measurable Cu corrosion near the open circuit potential. In contrast, ammonia, methylamine, ethylamine, monoethanolamine, diethylamine, diethanolamine, and piperazine all induced Cu corrosion. Corrosion rates correlate with the pK a and steric hindrance of the amines, highlighting key parameters for catalyst–amine codesign. Grand canonical DFT calculations indicate a correlation between the adsorption strength of protonated amines, their pK a , and the extent of Cu corrosion, suggesting that both the surface binding of protonated amines and the lability of their protons play critical roles in corrosion acceleration near open circuit potentials. These finding suggest that amines with high pK a values and weak binding of their protonated forms to Cu surfaces are preferred, as they offer better corrosion resistance.

Choi, Jounghwan [Univ. of California, Los Angeles,↗
DOE OSTI2025

Dynamic Surface Restructuring in Cu(Au) Alloys Driven by Oxygen-Mediated Au Mobility

Alloying plays a crucial role in tuning the surface properties of metals, but the atomic-level mechanisms by which alloying elements influence surface structure dynamics under reactive conditions remain elusive. Using Cu(Au) in oxidizing environments as a model system, we reveal a dynamic oxygen-induced transformation of the topmost atomic layer into a periodically hill-and-valley morphology with reversible switching between undulated and flattened surface states. These interconversions are driven by the retreat of surface Au to the subsurface during oxygen adsorption and its resegregation to the surface upon oxygen desorption. This cyclical mobility establishes a feedback loop, allowing the surface to dynamically reconfigure in response to changes in the oxygen pressure. The results offer a broadly applicable framework for understanding atomic-scale surface restructuring in alloy systems, where differences in the chemical reactivity of alloying elements drive dynamic redistribution between surface and subsurface regions. As a result, this dynamic coupling has practical implications for designing corrosion-resistant coatings and metastable nanostructures with tunable catalytic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Surface Phase Stability of Fe 2 O 3 (001) in Hydrogen Reducing Environments: A DFT and XPS Analysis

Here, this study combines density functional theory (DFT) and ab initio thermodynamics calculations with X-ray photoelectron spectroscopy (XPS) investigations to identify the reduction properties of the Fe 2 O 3 (001) surface with implications for corrosion resistance, hydrogen transport, and energy safety. Ab initio thermodynamics modeling predicts fully hydroxylated surface stability across a broad range of pressures (1 × 10 –23 to 1 × 10 5 mbar) and temperatures below 700 K, consistent with previous experimental studies. Above 800 K, exposures to 1 × 10 –4 mbar H 2 , 1 × 10 –4 mbar O 2 , or 1 × 10 –4 mbar H 2 + 1 × 10 –4 mbar O 2 each yield unique XPS signals indicating a loss of −OH coverage, aligning with DFT predictions. Insight into the mechanism of reduction as a function of H 2 exposure is provided, as well as conditions that promote further reduction toward Fe 3 O 4 . Theoretical and experimental investigations indicate the ability to maintain the Fe 2 O 3 protective layer of iron oxides that have been exposed to H 2 environments by including trace amounts of aqueous O2.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Facile One-Pot Block Copolymer-Mediated Solvothermal Approach for Synthesis of High-Entropy Alloy with Enhanced OER Activity

Herein, we introduce a straightforward synthesis approach for highly active dendritic multimetallic high-entropy alloy (DMHEA@PtIrPdAgRu) nanoparticles with sufficient entropic mixing, featuring uniform distribution of five noble group metals (Pt, Ir, Pd, Ag, and Ru) via a block copolymer-mediated one-pot solvothermal reduction method for oxygen evolution reaction (OER). In this synthesis, N,N -dimethylformamide (DMF) is used as a reductant as well as solvent and core–shell-corona-type (poly(styrene)- block -poly(vinylpyridine)- block -poly(ethylene oxide)) (PS-PVP-PEO) block copolymer as a structure directing agent. The cooperative effect between the copolymer architecture and the reducing environment of DMF promoted a confined nucleation mechanism for forming a single-phase dendritic structure HEA with high compositional uniformity, thereby mitigating phase segregation, a common challenge in the synthesis of multimetallic nanoparticles. This prepared DMHEA@PtIrPdAgRu catalyst exhibits a low overpotential of 490 mV to attain a high current density of 100 mA cm –2 with a Tafel slope of 442 mV dec –1 for oxygen evolution. The superior OER performance is attributed to the synergistic cooperation among its active and coordinated metal centers as well as the incorporation of corrosion-resistant metal like platinum.

block copolymer↗
DOE OSTI2024

Unsupervised learning-enabled pulsed infrared thermographic microscopy of subsurface defects in stainless steel

Metallic structures produced with laser powder bed fusion (LPBF) additive manufacturing method (AM) frequently contain microscopic porosity defects, with typical approximate size distribution from one to 100 microns. Presence of such defects could lead to premature failure of the structure. In principle, structural integrity assessment of LPBF metals can be accomplished with nondestructive evaluation (NDE). Pulsed infrared thermography (PIT) is a non-contact, one-sided NDE method that allows for imaging of internal defects in arbitrary size and shape metallic structures using heat transfer. PIT imaging is performed using compact instrumentation consisting of a flash lamp for deposition of a heat pulse, and a fast frame infrared (IR) camera for measuring surface temperature transients. However, limitations of imaging resolution with PIT include blurring due to heat diffusion, sensitivity limit of the IR camera. We demonstrate enhancement of PIT imaging capability with unsupervised learning (UL), which enables PIT microscopy of subsurface defects in high strength corrosion resistant stainless steel 316 alloy. PIT images were processed with UL spatial–temporal separation-based clustering segmentation (STSCS) algorithm, refined by morphology image processing methods to enhance visibility of defects. The STSCS algorithm starts with wavelet decomposition to spatially de-noise thermograms, followed by UL principal component analysis (PCA), fine-tuning optimization, and neural learning-based independent component analysis (ICA) algorithms to temporally compress de-noised thermograms. The compressed thermograms were further processed with UL-based graph thresholding K-means clustering algorithm for defects segmentation. The STSCS algorithm also includes online learning feature for efficient re-training of the model with new data. For this study, metallic specimens with calibrated microscopic flat bottom hole defects, with diameters in the range from 203 to 76 µm, were produced using electro discharge machining (EDM) drilling. While the raw thermograms do not show any material defects, using STSCS algorithm to process PIT images reveals defects as small as 101 µm in diameter. To the best of our knowledge, this is the smallest reported size of a sub-surface defect in a metal imaged with PIT, which demonstrates the PIT capability of detecting defects in the size range relevant to quality control requirements of LPBF-printed high-strength metals.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Correlating surface adsorbate configuration and electrochemical performance of IrO 2 during seawater-relevant electrolysis

Seawater electrolysis alleviates freshwater demand to produce clean hydrogen while eliminating the need for water purification steps. The anodic process, seawater oxidation, typically requires high overpotentials and yields low selectivity to oxygen via the oxygen evolution reaction (OER), primarily due to the competing chlorine evolution reaction (CER) and hypochlorite evolution reaction (HCER) in pH-neutral conditions. Here, combining in situ surface-enhanced Raman characterization, grand canonical density functional theory-based calculations, and kinetic Monte Carlo simulations, we report the evolution of surface adsorbate configurations driven by applied potential and pH during seawater-relevant OER over IrO 2 , a highly OER-active and chloride-corrosion-resistant catalyst. As a result, the chemical properties of active sites, and thereby the kinetics of OER and CER/HCER, are effectively tuned. However, it is revealed that there is no optimal combination of potential and pH to achieve both high activity and high selectivity for seawater-relevant OER. To address this limitation, we establish a correlation between activity/selectivity and surface adsorbate configurations, enabling the optimization of highly active and OER-selective IrO 2 -based catalysts in seawater-relevant oxidation by modulating the local adsorbate environment of active sites.

08 HYDROGEN↗
DOE OSTI2026

Mechanistic Investigation of Co(II) Extraction by TODGA to Aid Nuclear Forensic Separations

Nuclear forensic (NF) analysis supports law enforcement inquiries by analyzing evidence tainted with radioactive substances. Separation techniques can be used to identify and quantify actinides and fission 15 products in post-detonation (PD) debris. Environmental transition metals, also present in PD residues, have been observed to impact critical isotope extractions. For example, radio stable cobalt (Co), ubiquitous in urban environments, particularly in corrosion-resistant alloys, paint-drying agents, dyes, and pigments, can impact the separation of important actinides and fission products. The presented work aims to elucidate the chemistry Q2 governing Co extraction in samples pertinent to PDNF. Chemistry between Co and N,N,N,‘N’-tetraoctyl diglyco- 20 lamide (TODGA), the ligand present in the commercial chromatographic resin diglycolamide (DGA), were studied via solvent and chromatographic extraction and spectroscopic analyses. These results indicate that a tetrahedral Co(II) species is extracted by TODGA from highly acidic (>5M HCl) solutions via a spontaneous entropy-driven reaction. Furthermore, extraction trends in varied acid concentrations are consistent between solvent extraction and chromatographic extraction methods.

activation product↗
DOE OSTI2024

Flow and Heat Transfer Experimental Study for 3D-Printed Solar Receiving Tubes With Helical Fins at Internal Surface

3D-printing technology was applied to fabricate novel solar thermal collection tubes that have internal heat transfer enhancement fins and external surfaces with high solar absorptivity and low emissivity due to the ability to use different materials in one tube. Helical fins were selected to introduce circumferential flow and thus minimize the circumferential temperature difference of the tube that receives sunlight on one side. The structures of the helical fins were previously optimized from computational fluid dynamics (CFD) analysis with the objective of low entropy production rate by looking for high heat transfer coefficient and relatively lower pressure loss. High-temperature alloy, Inconel-718, was used to 3D print the tubes, which can resist corrosion for the potential application of molten chloride salts as heat transfer fluid. Experimental tests were carried out using water as the heat transfer fluid with the high heat flux provided by a tubular furnace heater. The tested Reynolds number ranges from 3.9 × 10 3 to 6.1 × 10 4 . Heat transfer coefficients of up to 2.8 times that of the smooth tube could be obtained with the expense of increased pressure loss compared to that of the smooth tube. The total system entropy generation can be significantly reduced due to the benefit of heat transfer enhancement that is greater than the expenses of the increased pressure loss. The experimental results of the 3D-printed heat transfer tubes confirmed the CFD-based results of fin optimization. Furthermore, the novel heat transfer tube is recommended for application in concentrating solar power systems.

14 SOLAR ENERGY↗
DOE OSTI2025

Highly textured metal anodes for stable aqueous batteries: Fabrication and characterization

We report a purely mechanical “cold-compression flow” method for fabricating Zn, Sn, and In substrates with tunable crystallographic textures. Using textured Zn as a model system, we investigate Zn electrocrystallization and demonstrate correlated growth of crystalline films with correlation lengths from tens to hundreds of micrometers. At 5 milliamperes per square centimeter (mA/cm 2 ), capacities between 20 and 82 milliampere hours per square centimeter (mA·hour/cm 2 ) are achieved depending on substrate texture level. At higher currents (40 mA/cm 2 ), capacities reach up to 604 mA·hour/cm 2 . Rotating disk electrode studies show that dominantly (002) textured Zn substrates exhibit enhanced corrosion resistance and reduced interphase passivation. We introduce an effective Damköhler number (Da*) to concisely describe morphological evolution during electrocrystallization across substrates with different textures. High-texture (002) Zn substrates substantially enhance performance in high-capacity (~20 mA·hour/cm 2 ) symmetric Zn||Zn cells and full cells (Zn||δ-MnO 2 and Zn||I 2 ), enabling fast-charging and prolonged energy storage in coin and pouch rechargeable Zn battery formats.

Science & Technology - Other Topics↗
DOE OSTI2024

Machine learning assisted prediction of tungsten heavy alloy plasma facing component performance for fusion energy applications

Tungsten and tungsten heavy alloys (WHAs), known for their remarkably high hardness, durability, and corrosion resistance, play a critical role in the thriving development of nuclear fusion reactors in recent years. However, the exploration in tungsten alloys for the nuclear-related applications has been limited by the difficulty of manufacturing and the complexity of experiments to reproduce the environment of nuclear reaction. Therefore, this project aims to utilize nanoscale simulation methods such as density functional theory (DFT) and molecular dynamics (MD) with the help of machine learning techniques to not only understand the mechanisms of tungsten alloys but also allow us to computationally predict their mechanical behaviors under extreme environments. One critical problem of the application of WHAs in nuclear reactors is the surface melting. In the current design of the SPARC reactor, the WHA, W97Ni2.1Fe0.9 or W97NiFe, is chosen to be the first wall components to confine the plasma where the particles are fiercely moving and colliding into each other to create nuclear fusion reaction. This process will generate extremely high heat flux onto these WHA tiles, leaving high surface temperature that could possibly melt the surface of the WHA tiles, As illustrated in Fig. 1(a). a laser experiment previously done illustrates that a rough surface damage would be made after the surface melting where the matrix area mainly composed of nickel and iron as shown in Fig. 1(b), will first melt and then leave vacancies between these tungsten grains. Unfortunately, these kinds of roughness on the first-wall components could be deadly to the plasma inside a Tokmak reactor because the heat that is supposed to dissipate at a designed ratio through the tiles may in turn be excessively absorbed and accumulated on any uneven area of the surface, which will eventually make the whole nuclear reaction fail. In this project, we will introduce a machine learning potential, Allegro, based on DFT calculation and then build a MD model for W-Ni-Fe alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Corrosion Testing of Bubbler Materials for LAW Vitrification (Rev. 0)

This work involved crucible-scale corrosion tests using coupons of selected materials in the baseline glass formulations for the seven LAW Sub-Envelopes. The tests were performed with Inconel 690 and MA 758; per the Test Plan, selected tests were also performed with a proprietary high temperature alloy supplied by SRTC. Coupons of these materials were tested for their corrosion resistance to LAW baseline glasses in two test series: the first series was with a baseline glass only, the second series was with a baseline glass and an added salt layer.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Additively Manufactured Molten Salt to Supercritical Carbon Dioxide Heat Exchanger

Design, fabrication, and experimental characterization of the performance of a molten salt (MS)-to-supercritical carbon dioxide (sCO 2 ) heat exchanger (HE) for concentrating solar power (CSP) applications using laser powder bed fusion (LPBF) additive manufacturing (AM) of nickel-based superalloys is presented in this report. The hypothesis is that such additively manufactured HEs will result in a monolithic, compact, low-pressure drop HE that is durable under cyclic operation at high temperature and high pressure in a corrosive salt environment. Two nickel-based superalloys were considered in the project- Haynes 230 (H230) and Haynes 282 (H282). Process windows for LPBF AM were established to provide dense low porosity parts for both alloys. Creep tests results on heat treated AM H230 and H282 samples showed that the AM fabricated specimens were as robust as the wrought specimens and showed no deficit in creep strength at high temperatures. Haynes 282 was down selected for the HE fabrication based on better dimensional tolerance, better corrosion resistance to chloride salt, and higher creep strength.

14 SOLAR ENERGY↗
DOE OSTI2024

Screening aqueous organic redox couples for spontaneous hydrogen generation on catalysts

Two low-cost redox couples with near neutral or alkaline pH - 7,8-dihydroxyphenazine-2-sulfonic acid (DHPS) and chrome chelated ethylenediaminetetraacetic acid (Cr-EDTA) with ammonia – are identified to generate hydrogen evolution spontaneously on Pt/C catalysts. Cr-EDTA redox couple has two times higher hydrogen evolution rate than that of DHPS, and the charged Cr-EDTA molecules are fully utilized to generate hydrogen gas, while ~ 50% of DHPS molecules are utilized to produce hydrogen spontaneously on Pt/C catalysts. The Cr-EDTA electrolyte enables cost reduction by allowing cheap raw material of Cr and corrosion resistant alloy instead of costly superalloy for catalytic reactor systems. Furthermore, the Cr-EDTA with ammonia as a negolyte for flow batteries was validated to suppress hydrogen evolution side reaction, reach 99% of coulombic efficiency in flow cell operation paired with Fe(CN)6 redox couple near neutral pH.

08 HYDROGEN↗
DOE OSTI2024

Transfer Tube Material Properties Obtained from Test Data

A series of tension and compression tests were performed on typical transfer tubes made of 304L corrosion-resistant steel. The results were compiled and converted to true stress and true plastic strain for comparison to numerical models. The parameters of a Johnson-Cook constitutive model and fracture criterion were calibrated to mimic the test data. Comparisons were made between the converted data and the empirical formulas in the Johnson-Cook model. Simulations were performed to evaluate the implementation of the formula in finite element analysis, and the parameters were adjusted to improve the correlation.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Development of Multimaterial Graded Structure from Superalloys to Refractory Alloys

This research focused on developing hybrid microstructures for extreme environments where zone-specific performance is essential. Traditional structural applications rely on single alloy compositions, often requiring compromises in cost, corrosion resistance, or high-temperature stability, while dissimilar welding leads to abrupt material transitions and potential mechanical weaknesses. By employing a combinatorial approach, this study enabled a gradual transition of chemistries across components, allowing site-specific tailoring of microstructures. Leveraging additive manufacturing’s flexibility, this concept facilitated multi-material alloying and optimized fabrication strategies, unlocking new capabilities in high-performance applications while reducing manufacturing costs.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2025

Manufacturing of Al-Ce/Metal-Matrix-Composites (MMC) for Harsh Environments

An integrated modeling/simulation and experimental approach will be used to design and synthesize Al-Ce/MMC for use in key technologies where improved energy efficiency and performance is harsh environments is required. Modeling and simulation work including thermodynamic modeling, DFT calculations, and continuum modeling of casting processes and mechanical behavior, will be combined with lab-scale synthesis to identify potential matrix and reinforcing phase compositions for large-scale synthesis. The experimental synthesis work will rely on lab-scale casting and gas atomization to identify the optimal matrix compositions for pilot/commercial-scale synthesis is Al-Ce/MMC. Selected Al-Ce/MMC will be synthesized by commercial scale melt processing, powder metallurgy and thermomechanical processing. The corrosion resistance, mechanical properties as a function of temperature, and thermal conductivity of the composites will be characterized to validate target properties are met or exceeded. This work will focus on two selected applications; however, the design framework will have broad applicability for composites for numerous harsh service condition applications. We will have synthesized Al-Ce/MMC that exhibit better performance in harsh environments than currently used materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Development of Multimaterial Graded Structure from Superalloys to Refractory Alloys

This research focused on developing hybrid microstructures for extreme environments where zone-specific performance is essential. Traditional structural applications rely on single alloy compositions, often requiring compromises in cost, corrosion resistance, or high-temperature stability, while dissimilar welding leads to abrupt material transitions and potential mechanical weaknesses. By employing a combinatorial approach, this study enabled a gradual transition of chemistries across components, allowing site-specific tailoring of microstructures. Leveraging additive manufacturing’s flexibility, this concept facilitated multi-material alloying and optimized fabrication strategies, unlocking new capabilities in high-performance applications while reducing manufacturing costs.

36 MATERIALS SCIENCE↗