Search NASA⌕ Search

SEARCH · Search NASA

Results for “CUTTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Hybrid manufactured dynamometer for cutting force measurement

This paper describes a two-step (additive + subtractive) hybrid manufacturing approach for a laser powder bed fusion 316L stainless steel constrained-motion cutting force dynamometer (PBF CMD). The purpose of the research is to produce a near-net shape metallic dynamometer via additive manufacturing (AM) with post-processing by machining and wire-EDM to achieve the desired surface finish and performance. A cutting force comparison is presented with a commercially-available dynamometer.

36 MATERIALS SCIENCE↗

Gene expression analysis of precision-cut human liver slices indicates stable expression of ADME-Tox related genes

In the process of drug development it is of high importance to test the safety of new drugs with predictive value for human toxicity. A promising approach of toxicity testing is based on shifts in gene expression profiling of the liver. Toxicity screening based on animal liver cells cannot be directly extrapolated to humans due to species differences. The aim of this study was to evaluate precision-cut human liver slices as in vitro method for the prediction of human specific toxicity by toxicogenomics. The liver slices contain all cell types of the liver in their natural architecture. This is important since drug-induced toxicity often is a multi-cellular process. Previously we showed that toxicogenomic analysis of rat liver slices is highly predictive for rat in vivo toxicity. In this study we investigated the levels of gene expression during incubation up to 24 h with Affymetrix microarray technology. The analysis was focused on a broad spectrum of genes related to stress and toxicity, and on genes encoding for phase-I, -II and -III metabolizing enzymes and transporters. Observed changes in gene expression were associated with cytoskeleton remodeling, extracellular matrix and cell adhesion, but for the ADME-Tox related genes only minor changes were observed. PCA analysis showed that changes in gene expression were not associated with age, sex or source of the human livers. Slices treated with acetaminophen showed patterns of gene expression related to its toxicity. These results indicate that precision-cut human liver slices are relatively stable during 24 h of incubation and represent a valuable model for human in vitro hepatotoxicity testing despite the human inter-individual variability.

60 APPLIED LIFE SCIENCES↗

Precision-cut liver slices as a model for the early onset of liver fibrosis to test antifibrotic drugs

Induction of fibrosis during prolonged culture of precision-cut liver slices (PCLS) was reported. In this study, the use of rat PCLS was investigated to further characterize the mechanism of early onset of fibrosis in this model and the effects of antifibrotic compounds. Rat PCLS were incubated for 48 h, viability was assessed by ATP and gene expression of PDGF-B and TGF-β1 and the fibrosis markers Hsp47, αSma and Pcol1A1 and collagen1 protein expressions were determined. The effects of the antifibrotic drugs imatinib, sorafenib and sunitinib, PDGF-pathway inhibitors, and perindopril, valproic acid, rosmarinic acid, tetrandrine and pirfenidone, TGFβ-pathway inhibitors, were determined. After 48 h of incubation, viability of the PCLS was maintained and gene expression of PDGF-B was increased while TGF-β1 was not changed. Hsp47, αSma and Pcol1A1 gene expressions were significantly elevated in PCLS after 48 h, which was further increased by PDGF-BB and TGF-β1. The increased gene expression of fibrosis markers was inhibited by all three PDGF-inhibitors, while TGFβ-inhibitors showed marginal effects. The protein expression of collagen 1 was inhibited by imatinib, perindopril, tetrandrine and pirfenidone. In conclusion, the increased gene expression of PDGF-B and the down-regulation of fibrosis markers by PDGF-pathway inhibitors, together with the absence of elevated TGF-β1 gene expression and the limited effect of the TGFβ-pathway inhibitors, indicated the predominance of the PDGF pathway in the early onset of fibrosis in PCLS. PCLS appear a useful model for research of the early onset of fibrosis and for testing of antifibrotic drugs acting on the PDGF pathway. - Highlights: • During culture, fibrosis markers increased in precision-cut liver slices (PCLS). • Gene expression of PDGF-β was increased, while TGFβ was not changed in rat PCLS. • PDGF-pathway inhibitors down-regulated this increase of fibrosis markers. • TGFβ-pathway inhibitors had only minor effects on fibrosis markers. • Rat PCLS can be used to study the early onset of fibrosis.

60 APPLIED LIFE SCIENCES↗

Applicability of rat precision-cut lung slices in evaluating nanomaterial cytotoxicity, apoptosis, oxidative stress, and inflammation

The applicability of rat precision-cut lung slices (PCLuS) in detecting nanomaterial (NM) toxicity to the respiratory tract was investigated evaluating sixteen OECD reference NMs (TiO{sub 2}, ZnO, CeO{sub 2}, SiO{sub 2}, Ag, multi-walled carbon nanotubes (MWCNTs)). Upon 24-hour test substance exposure, the PCLuS system was able to detect early events of NM toxicity: total protein, reduction in mitochondrial activity, caspase-3/-7 activation, glutathione depletion/increase, cytokine induction, and histopathological evaluation. Ion shedding NMS (ZnO and Ag) induced severe tissue destruction detected by the loss of total protein. Two anatase TiO{sub 2} NMs, CeO{sub 2} NMs, and two MWCNT caused significant (determined by trend analysis) cytotoxicity in the WST-1 assay. At non-cytotoxic concentrations, different TiO{sub 2} NMs and one MWCNT increased GSH levels, presumably a defense response to reactive oxygen species, and these substances further induced a variety of cytokines. One of the SiO{sub 2} NMs increased caspase-3/-7 activities at non-cytotoxic levels, and one rutile TiO{sub 2} only induced cytokines. Investigating these effects is, however, not sufficient to predict apical effects found in vivo. Reproducibility of test substance measurements was not fully satisfactory, especially in the GSH and cytokine assays. Effects were frequently observed in negative controls pointing to tissue slice vulnerability even though prepared and handled with utmost care. Comparisons of the effects observed in the PCLuS to in vivo effects reveal some concordances for the metal oxide NMs, but less so for the MWCNT. The highest effective dosages, however, exceeded those reported for rat short-term inhalation studies. To become applicable for NM testing, the PCLuS system requires test protocol optimization. - Highlights: • 16 OECD reference nanomaterials were tested in rat precision-cut lung slices. • Nanomaterial cytotoxicity, apoptose, oxidative stress, and inflammation were detected. • Investigating these early effects is not sufficient to predict in vivo outcome. • Reproducibility was not fully satisfactory in the glutathione and cytokine assays. • Further work is required to adjust effective dosages in vitro to in vivo doses.

60 APPLIED LIFE SCIENCES↗

Microstructures of ZnO films deposited on (0001) and r-cut α-Al2O3 using metal organic chemical vapor deposition

Zinc oxide films were deposited on (0001) and r-cut α-Al2O3 under identical conditions using metal organic chemical vapor deposition. Microstructures of the ZnO films were studied in detail using conventional and high-resolution transmission electron microscopy (HRTEM), electron diffraction, and HRTEM image simulations. The films deposited on these two substrates show distinctive structural differences. The film grown on r-cut α-Al2O3 shows a high quality single crystal with an orientation relationship of α-Al2O3[-101-1]//ZnO[0001] and α-Al2O3(10-1-2)//ZnO(2-1-10). The interface between the film and the substrate was abrupt and decorated with high density of misfit dislocations. Film grown on α-Al2O3 (0001) shows several orientation domains. Typically, one domain correspond to the classic growth model such that α-Al2O3 (0001)//ZnO(0001) and α-Al2O3 [11-20]//ZnO[10-10]. Another domain corresponds to the growth mode such that α-Al2O3 [11-20]//ZnO[10-10] but the (0001) plane of ZnO is tilted relative to the (0001) plane of α-Al2O3 such that ZnO(0001) is almost parallel to the α-Al2O3 (-1104) plane. This orientation reduces the extent of lattice mismatch as compared with the classic growth mode. The interface between ZnO and α-Al2O3 is abrupt and possesses periodic dislocations.

36 MATERIALS SCIENCE↗

Cut site preference allows influenza A virus PA-X to discriminate between host and viral mRNAs

Many viruses block host gene expression to take over the infected cell. This process, termed host shutoff, is thought to promote viral replication by preventing antiviral responses and redirecting cellular resources to viral processes. Several viruses from divergent families accomplish host shutoff through RNA degradation by endoribonucleases. However, viruses also need to ensure expression of their own genes. The influenza A virus endoribonuclease PA-X solves this problem by sparing viral mRNAs and some host RNAs necessary for viral replication. Here, to understand how PA-X distinguishes between RNAs, we characterized PA-X cut sites transcriptome-wide using 5' rapid amplification of complementary DNA ends coupled to high-throughput sequencing. This analysis, along with RNA structure predictions and validation experiments using reporters, shows that PA-Xs from multiple influenza strains preferentially cleave RNAs at GCUG tetramers in hairpin loops. Importantly, GCUG tetramers are enriched in the human but not the influenza transcriptome. Moreover, optimal PA-X cut sites inserted in the influenza A virus genome are quickly selected against during viral replication in cells. This finding suggests that PA-X evolved these cleavage characteristics to preferentially target host over viral mRNAs in a manner reminiscent of cellular self versus non-self discrimination.

59 BASIC BIOLOGICAL SCIENCES↗

On the physical origin of the nozzle characteristic and its connection with the double-arcing phenomenon in a cutting torch

The nozzle current-voltage characteristic for a cutting arc is presented in this work. The measurements are reported using a high energy density cutting arc torch with a nozzle bore radius of 0.5 mm. The arc current was fixed at 30 A while the plenum pressure and the oxygen gas mass flow rate were varied in the range of 0.55-0.65 MPa and 0.32-0.54 g s{sup -1}, respectively. The results show a very low electron density and the lack of electron attachment at the plasma boundary layer. No ion saturation current was found. For the smallest mass flow rate value gas breakdown was found for a biasing nozzle potential close to that of the cathode, but no evidence of such breakdown was found for the larger mass flow rate values. Using an expression for the ion speed at the entry of the collisional sheath formed between the nonequilibrium plasma and the negatively biased nozzle wall together with a generalized Saha equation coupled to the ion branch of the characteristic, the radial profile of the electron temperature, the spatial distribution of the plasma density at the plasma boundary, and the sheath thickness were obtained. In particular, the obtained thickness value at the breakdown condition was in good agreement with that obtained from the oxygen Paschen's curve. An electron temperature of about 4700-5700 K and a corresponding plasma density of the order of 10{sup 19}-10{sup 20} m{sup -3} were found close to the nozzle wall. A physical interpretation on the origin of the double-arcing phenomenon is presented, that explains why the double-arcing (that it is established when the sheath breaks down) appears at low values of the gas mass flow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Asymmetrically cut crystal pair as x-ray magnifier for imaging at high intensity laser facilities

The potential of an x-ray magnifier prepared from a pair of asymmetrically cut crystals is studied to explore high energy x-ray imaging capabilities at high intensity laser facilities. OMEGA-EP and NIF when irradiating mid and high Z targets can be a source of high-energy x-rays whose production mechanisms and use as backlighters are a subject of active research. This paper studies the properties and potential of existing asymmetric cut crystal pairs from the National Institute of Standards and Technology (NIST) built in a new enclosure for imaging x-ray sources. The technique of the x-ray magnifier has been described previously. This new approach is aimed to find a design that could be used at laser facilities by magnifying the x-ray source into a screen far away from the target chamber center, with fixed magnification defined by the crystals' lattice spacing and the asymmetry angles. The magnified image is monochromatic and the imaging wavelength is set by crystal asymmetry and incidence angles. First laboratory results are presented and discussed.

36 MATERIALS SCIENCE↗

Measurement of electron density with the phase-resolved cut-off probe method

The phase resolved cut-off probe method, a precise measurement method for the electron density, was recently proposed [J. H. Kwon et al., Appl. Phys. Lett. 96, 081502 (2010)]. This paper presents the measurements of electron density using the method under various experimental conditions (different pressures, powers, chamber volumes, and discharge sources). The result shows that the method is not only in good agreement with the previous method using wave transmittance under various experimental conditions but it is also able to find the cut-off point clearly even under difficult conditions such as high pressure ({approx} 1 Torr), high discharge power, and small plasma volume. The details of the experimental setup, the operating mechanism of the probe method, and the data processing procedure (algorithm) are also addressed. Furthermore, the reliability of the measurement method is investigated by using an electromagnetic field simulation with cold plasma model (CST-Drude model, Computer Simulation Technology).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shear avalanches in metallic glasses under nanoindentation: Deformation units and rate dependent strain burst cut-off

Indented metallic glasses at the nanoscale deform via strain bursts. Conventional continuum descriptions are not appropriate for such highly stochastic, intermittent deformations. In this study, after a statistical analysis of strain bursts in five metallic glasses, the dependence of the cut-off of the strain burst size on deformation units and loading rate is established. For soft metallic glasses with smaller deformation units, cut-off of the strain burst size truncates the scale-free behavior at larger strain burst sizes. For hard metallic glasses, scale-free behavior occurs in a wide range of strain burst sizes.

36 MATERIALS SCIENCE↗

On the Alfvén wave cut-off in partly ionized collisional plasmas

The cut-off of the Alfvén wave, caused by plasma collisions with neutrals in multi-component partially ionized plasmas, is discussed. Full multi-component theory is used, and similarities and differences regarding the classic magnetohydrodynamic theory are presented. It is shown that the cut-off in partially ionized plasma, in principle, may remain the same as predicted in classic magnetohydrodynamic works, although multi-component theory also yields some essential differences. Due to electric field, the ion motion is intrinsically two-dimensional and this results in additional forced oscillations of neutrals. One new small parameter, containing the ion inertial length, appears in the multi-component theory. This new small parameter is missing in the magnetohydrodynamic description, and it turns out that for some parameters it may be greater than the ions-to-neutrals density ratio which is the only small parameter in the magnetohydrodynamic description. Due to this the Alfvén wave behavior can become much different as compared to classic magnetohydrodynamic results. It is shown also that in plasmas with unmagnetized ions, Alfvén waves cannot be excited. This by all means applies to the solar photosphere where the ion collision frequency may be far above the ion gyro-frequency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical investigation of the double-arcing phenomenon in a cutting arc torch

A numerical investigation of the double-arcing phenomenon in a cutting arc torch is reported. The dynamics of the double-arcing were simulated by using a two-dimensional model of the gas breakdown development in the space-charge layer contiguous to the nozzle of a cutting arc torch operated with oxygen. The kinetic scheme includes ionization of heavy particles by electron impact, electron attachment, electron detachment, electron–ion recombination, and ion–ion recombination. Complementary measurements during double-arcing phenomena were also conducted. A marked rise of the nozzle voltage was found. The numerical results showed that the dynamics of a cathode spot at the exit of the nozzle inner surface play a key role in the raising of the nozzle voltage, which in turn allows more electrons to return to the wall at the nozzle inlet. The return flow of electrons thus closes the current loop of the double-arcing. The increase in the (floating) nozzle voltage is due to the fact that the increased electron emission at the spot is mainly compensated by the displacement current (the ions do not play a relevant role due to its low-mobility) until that the stationary state is achieved and the electron return flow fully-compensates the electron emission at the spot. A fairly good agreement was found between the model and the experiment for a spot emission current growth rate of the order of 7 × 10{sup 4} A/s.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Near-infrared quantum-cutting luminescence and energy transfer properties of Ca{sub 3}(PO{sub 4}){sub 2}:Tm{sup 3+},Ce{sup 3+} phosphors

The phosphors Ca{sub 3}(PO{sub 4}){sub 2}:Tm{sup 3+} by co-doping Ce{sup 3+} have been synthesized by conventional high-temperature solid-state reaction method. Their spectroscopic properties in the UV-VIS-NIR range have been investigated. The first 5d crystal field level location and stokes shift have been determined from the UV excitation and emission spectra of Ca{sub 3}(PO{sub 4}){sub 2}:Ce{sup 3+}. The three-photon NIR quantum-cutting luminescence of Tm{sup 3+} assigned to the electronic transitions of {sup 1}G{sub 4}→{sup 3}H{sub 4}, {sup 3}H{sub 4}→{sup 3}F{sub 4} and {sup 3}F{sub 4}→{sup 3}H{sub 6} is observed, whether in Ca{sub 3}(PO{sub 4}){sub 2}:Tm{sup 3+} or Ca{sub 3}(PO{sub 4}){sub 2}:Tm{sup 3+},Ce{sup 3+}. The energy transfer from Ce{sup 3+} to Tm{sup 3+} takes place with energy-transfer efficiency up to 34.5% for the Ca{sub 3}(PO{sub 4}){sub 2}:Tm{sup 3+},Ce{sup 3+}. A cross relaxation scheme using the 5d states of Ce{sup 3+} and f-f transition of Tm{sup 3+} is proposed. The mechanism is revealed from energy level and decay measurements. The results show that the broadband absorption of Ce{sup 3+} sensitizer not only extends the spectrum conversion in UV region but also greatly enhances the photoluminescence intensities of the three-photon quantum cutting luminescence of Tm{sup 3+} doped Ca{sub 3}(PO{sub 4}){sub 2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design of weak link channel-cut crystals for fast QEXAFS monochromators

A weak link channel-cut crystal, optimized for dedicated Quick EXAFS monochromators and measurements, was designed using finite element analysis. This channel-cut crystal offers precise detuning capabilities to enable suppression of higher harmonics in the virtually monochromatic beam. It was optimized to keep the detuning stable, withstanding the mechanical load, which occurs during oscillations with up to 50 Hz. First tests at DELTA (Dortmund, Germany), proved the design.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Diode-pumped two-frequency lasers based on c-cut vanadate crystals

The luminescent and lasing properties of the neo-dymium ion at the {sup 4}F{sub 3/2}-{sup 4}I{sub 11/2} transition in c-cut vanadate crystals (Nd:YVO{sub 4}, Nd:GdVO{sub 4}, and Nd:Gd{sub 1-x}Y{sub x}VO{sub 4}) are studied. Tuning of the laser radiation wavelength ({Delta}{lambda} = 5.4 nm) is demonstrated. Two-frequency laser schemes with the use of a Lyot filter, a Fabry-Perot etalon, and a Brewster prism as spectral selection elements are proposed and experimentally realised. Stable two-frequency lasing of a laser based on the c-cut Nd:GdVO{sub 4} crystal was obtained in the cw, Q-switched (nanosecond pulses), and active acousto-optic mode-locked (picosecond pulses) regimes. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

EVIDENCE FOR INTERNAL TETHER-CUTTING IN A FLARE/CORONAL MASS EJECTION OBSERVED BY MESSENGER, RHESSI, AND STEREO

The relationship between eruptive flares and coronal mass ejections (CMEs) is a topic of ongoing debate, especially regarding the possibility of a common initiation mechanism. We studied the kinematic and hydrodynamic properties of a well-observed event that occurred on 2007 December 31 using data from MESSENGER, RHESSI, and STEREO in order to gain new physical insight into the evolution of the flare and CME. The initiation mechanism was determined by comparing observations to the internal tether-cutting, breakout, and ideal magnetohydrodynamic (MHD) models. Evidence of pre-eruption reconnection immediately eliminated the ideal MHD model. The timing and location of the soft and hard X-ray sources led to the conclusion that the event was initiated by the internal tether-cutting mechanism. In addition, a thermal source was observed to move in a downward direction during the impulsive phase of the event, followed by upward motion during the decay phase, providing evidence for X- to Y-type magnetic reconnection.

79 ASTRONOMY AND ASTROPHYSICS↗

Surface ionization waves propagating over non-planar substrates: wavy surfaces, cut-pores and droplets

Atmospheric pressure plasmas intersecting with dielectric surfaces will often transition into surface ionization waves (SIWs). Several applications of these discharges are purposely configured to be SIWs. During propagation of an SIW over a dielectric surface, the plasma charges the surface while responding to changes in geometrical and electrical material properties. This is particularly important for non-planar surfaces where polarization of the dielectric results in local electric field enhancement. In this paper, we discuss results from computational investigations of negative and positive SIWs propagating over nonplanar dielectrics in three configurations—wavy surfaces, cuts through porous materials and water droplets on flat surfaces. Here we found that negative SIWs are particularly sensitive to the electric field enhancement that occurs at the crests of non-planar surfaces. The local increase in ionization rates by the electric field enhancement can result in the SIW detaching from the surface, which produces non-uniform plasma exposure of the surface. Positive SIWs tend to adhere to the surface to a greater degree. These trends indicate that treatment of pathogen containing droplets on surfaces may be best performed by positive SIWs. The same principles apply to the surfaces cut through pores. Buried pores with small openings to the SIW may be filled by plasma by either flow of plasma into the pore (large opening) or initiated by photoionization (small opening), depending on the size of the opening compared to the Debye length.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Inclusive gluon production in the dipole approach: Abramovskii-Gribov-Kancheli (AGK) cutting rules

We consider single gluon production in the dipole model and reproduce the result of Kovchegov and Tuchin for the adjoint (gluonic) dipole structure of the inclusive cross section. We show the validity of the adjoint dipole structure to any order of evolution by deriving and solving the nonlinear evolution for the nondiagonal cross section of a dipole scattering off the target. The form of the solution to this equation restores the dipole interpretation for nondiagonal cross sections that appear in gluon production. Using this formalism, we analyze the single inclusive production cross section in terms of the contributions of different multiplicities, and we derive the Abramovskii-Gribov-Kancheli (AGK) cutting rules for two-Pomeron exchange. The cutting rules, which were found in this formalism, fully reproduce the original AGK rules for the total cross section. However, for the case of gluon production, the AGK rules are violated already for one-gluon emission from the vertex.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗