Search NASA⌕ Search

SEARCH · Search NASA

Results for “Carbon intensity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Analysis of Benefits Associated With Projects and Technologies Supported by the Clean Transportation Program: 2023 Executive Summary [Slides]

In 2007, California Assembly Bills (AB) 118 and 109 created the Clean Transportation Program (CTP), which authorized the California Energy Commission (CEC) to fund projects concerning alternative fuels and advanced transportation technologies to help attain the state's climate change policies. AB 109 also required CEC to prepare a report summarizing the benefits resulting from the program. Since then, CEC has collaborated with National Renewable Energy Laboratory to prepare and publish biannual reports summarizing CTP's benefits related to petroleum displacement, greenhouse gas (GHG) reductions, air pollution, and more. This report updates the input data, calculation methodologies, and resulting outputs from CEC's 2021 report.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS1975

Surface structure and electronic properties of materials

A surface potential model is developed to explain dopant effects on chemical vapor deposition. Auger analysis of the interaction between allotropic forms of carbon and silicon films has shown Si-C formation for all forms by glassy carbon. LEED intensity measurements have been used to determine the mean square displacement of surface atoms of silicon single crystals, and electron loss spectroscopy has shown the effect of structure and impurities on surface states located within the band gap. A thin film of Al has been used to enhance film crystallinity at low temperature.

Siekhaus, W. J.↗
NASA NTRS1976

Substorm generated fluxes of heavy ions at the geostationary orbit

Measurements of heavy energetic heavy ions present in the vicinity of the geostationary orbit of the ATS-6 satellite, taken with the aid of a solid-state detector telescope, are reported and analyzed. Data extracted from a single fairly isolated injection event (June 18, 1974) are examined: ions of Z not below 6 and energy above 4.0 MeV; energization of these heavy ions in the magnetosphere during substorm events; comparison of the heavy ion intensity and proton intensity; ratio of intensity of carbon ions and oxygen ions. The heavy ions are identified with oxygen for the most part. The heavy-ion spectrometer is described.

Fritz, T. A.↗
NASA NTRS1993

Neutral and ionized polycyclic aromatic hydrocarbons, diffuse interstellar bands and the ultraviolet extinction curve

Neutral naphthalene C10H8, phenanthrene C14H10 and pyrene C16H10 absorb strongly in the ultraviolet region and may contribute to the extinction curve. High abundances are required to produce detectable structures. The cations of these polycyclic aromatic hydrocarbons (PAHs) absorb in the visible C10H8(+) has 13 discrete absorption bands which fall between 6800 and 4500 A. The strongest band at 6741 A falls close to the weak 6742 A diffuse interstellar band (DIB). Five other weaker bands also match DIBs. The possibility that C10H8(+) is responsible for some of the DIBs can be tested by searching for new DIBs at 6520 and 6151 A, other strong naphthalene cation band positions. If C10H8(+) is indeed responsible for the 6742 A feature, it accounts for 0.3% of the cosmic carbon. The spectrum of C16H10(+) is dominated by a strong band at 4435 A in an Ar matrix and 4395 A in Ne, wavelengths which fall very close to the strongest DIB at 4430 A. If C16H10(+) or a closely related pyrene-like ion, is indeed responsible for the 4430 A feature, it accounts for 0.2% of the cosmic carbon. An intense, very broad UV-to-visible continuum is reported which is associated with both ions and could explain how PAHs convert interstellar UV and visible radiation into IR radiation.

Salama, Farid↗
DOE OSTI2022

Pathways to a Sustainable Aviation Ecosystem: Life Cycle Analysis with Blockchain Carbon Accounting

When linked with the National Renewable Energy Laboratory's (NREL's) rigorous life cycle assessment methodologies, blockchain technology can enable aviation stakeholders to quantify and transact on the impacts and benefits of sustainable aviation fuels and technologies. NREL can develop high-fidelity carbon modeling tools that enable apples-to-apples comparisons across technologies, fuels, companies, and jurisdictions.

aviation↗
NASA NTRS1978

The response of heat-shield materials to intense laser radiation

Experimental results for the response of ATJ graphite, Carbitex 100, and carbon phenolic to intense continuous-wave laser radiation are presented. Both penetration and mass-loss test techniques are used and compared. The results are also compared with a simple ablation theory applicable to laser irradiation. Reasons for the disparity between experiment and theory, and applicability of the results to other heating situations, such as planetary entry, are discussed.

Lundell, J. H.↗
DOE OSTI2021

Monte Carlo transport analysis to assess intensity dependent response of a carbon-doped GaN photoconductor

In this report evaluation of the photoresponse in wurtzite GaN photoconductive switches is presented based on kinetic Monte Carlo simulations. The focus is on electron transport physics and assessment of high frequency operation. The roles of GaN band structure, Pauli exclusion, and treatment of internal fields based on the fast multipole method are all comprehensively included. The implementation was validated through comparisons of velocity-field characteristics for GaN with computational results in the literature. Photocurrent widths of less than ~7 ps for the 1 μm device can be expected, which translates into a 100 GHz upper bound. Photocurrent pulse compression below the laser full width at half maxima at high applied fields are predicted based on the interplay of space-charge effects and the negative differential velocity characteristics of GaN.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Global Carbon Consumption Database for Wildland Fire

Fire significantly impacts both human-altered and wild landscapes on national and global scales. Though often devastating, wildland fires naturally reduce fuels, preventing larger wildfires. However, their smoke can harm human health locally and globally. To understand its impact on air quality and health, quantifying the emissions released into the atmosphere is crucial. To accurately model fire emissions, understanding fuel characteristics and burning conditions is crucial, as they vary with the fuelbed type and fire weather. For example, savanna fires have lower carbon loading and intensity but spread quickly, while boreal forest fires burn longer and release more carbon due to higher loading. Hotter, drier conditions increase fuel consumption and smoke plume height. Fire weather and available fuel are the key drivers of emissions.

Emily Gargulinski↗
NASA NTRS1987

Spectral reflectance of carbonate minerals in the visible and near infrared (0.35-2.55 microns) - Anhydrous carbonate minerals

Visible and near IR reflectance spectra for anhydrous carbonate minerals are presented, and the use of the spectra to determine the mineralogy and gaining information for the carbonate minerals is examined. Seven strong absorption bands at wavelengths greater than 1.6 microns are observed in all the spectra of anhydrous end-member carbonate minerals. The band position, intensity, and width for the carbonate bands are studied. The iron and maganese bands for the carbonate minerals are analyzed. The potential causes of spectral differences between carbonate minerals are investigated.

Gaffey, Susan J.↗
DOE OSTI2023

Improving Carbonate-Promoted C–H Carboxylation Using Mesoporous Carbon Supports

C–H carboxylation is an attractive way to utilize CO 2 for chemical production provided that it does not consume resource-intensive reagents. Alkali carbonates dispersed into the pores of mesoporous supports display strongly basic reactivity under CO 2 , allowing them to be used as base promoters for C–H carboxylation of (hetero)arenes in the absence of other reagents or catalysts. Mesoporous oxides are convenient support materials, but only a relatively small fraction of the dispersed carbonate (ca. 10-20%) is converted to carboxylate products when metal oxide supports are used. Here we compare mesoporous oxide and carbon supports and investigate the dependence of carbonate reactivity on pore structure. We show that using mesoporous carbons supports can increase the carbonate conversion by 2–4x when compared to oxide supports. This improved carbonate reactivity is maintained across a variety of mesoporous carbons with different pore structures (ordered vs. disordered) and pore diameters, indicating that the dispersed carbonate is intrinsically more reactive on the surface of a carbon material compared to an oxide surface. Reaction of the carboxylate products with dimethyl carbonate yields isolable methyl esters as the final product and regenerates the dispersed carbonate. We show that mesoporous carbon supports are robust to at least 5 cycles of successive C–H carboxylation and methylation with dimethyl carbonate. Furthermore, understanding how the support structure affects dispersed carbonate reactivity is valuable for advancing C–H carboxylation toward practical application and utilizing these materials in other CO 2 transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A combined biological and chemical flue gas utilization system towards carbon dioxide capture from coal-fired power plants (Final Report)

Photosynthetic algal cultivation has been intensively studied for CO 2 capture and utilization for several decades. The footprint for using algae to capture CO 2 emitted from carbon-intensive industrial processes (power plants, cement plants, and fermentation processes) is extremely large, which creates serious technical and economic hurdles that must be cleared if algal technologies are to be commercially implemented. Fortunately, algal biomass is rich in proteins, carbohydrates, and lipids, providing a good chemical source for organic absorbents and other value-added chemical feedstocks. In particular, amino acids from algal protein can be used to generate amino acid salt solutions that have been proven to be effective for capturing CO 2 . In order to take advantage of both algal cultivation and biomass utilization, the goal of the proposed project is to develop a combined biological and chemical system for coal-fired power plants for sequestering CO 2 in biological absorbents and generating value-added products. This approach significantly reduces the land and energy footprint of CO 2 capture, and minimizes capital and operational expenses. Three specific objectives are targeted: 1) optimizing the growth of the selected algal strain to maximize biomass accumulation from the coal-fired flue gas; 2) developing a cascade biomass utilization to produce amino acid absorbents, polyurethanes, biodiesel, and methane; and 3) conducting techno-economic analysis (TEA) and life cycle assessment (LCA) of the proposed process. Three key technical outcomes were achieved: (1) With the selected robust algal strain and unique photobioreactor design, long-term culture stability can be extended, and algal biomass productivity reached 0.5 g dry biomass/L/day year-round at a biomass concentration of 1.2 g/L in the pilot photobioreactor; (2) The biomass utilization process led to complete utilization of the algal biomass to produce amino acid salt absorbent, polyurethanes, and methane; and (3) The combined biological and chemical flue gas utilization process concluded a technically and economically feasible commercial-scale system that completely captures CO 2 in coal-fired flue gas with greatly reduced energy consumption.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Validation of the ERO2.0 code using W7-X and JET experiments and predictions for ITER operation

Abstract The paper provides an overview of recent modelling of global material erosion and deposition in the fusion devices Wendelstein 7-X (W7-X), JET and ITER using the Monte-Carlo code ERO2.0. For validating the modelling tool in a three-dimensional environment, W7-X simulations are performed to describe carbon erosion from the graphite test divertor units, which were equipped in operational phase OP 1.2 and analysed post-mortem. Synthetic spectroscopy of carbon line emission is compared with experimental results from the divertor spectrometer measurement system, showing a good agreement in the e-folding lengths in the radial intensity profiles of carbon. In the case of metallic wall materials, earlier modelling of the Be/W environment in JET and ITER is revisited and extended with an updated set of sputtering and reflection data, as well as including the mixing model for describing the Be/W dynamics in the divertor. Motivated by recent H/D/T isotope experiments in JET, limited and diverted configuration pulses are modelled, showing the expected trend of both Be and W erosion increasing with isotope mass. For the JET diverted configuration pulses, it is shown that Be migrates predominantly to the upper part of the inner divertor where it initially leads to strong W erosion. With longer exposure time, the growth of a Be deposited layer leads to a reduction of W erosion in that region. A similar trend is observed in simulations of the ITER baseline Q = 10 scenario, however with a more symmetric Be migration pattern leading to deposition also on the outer divertor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Carbon flow through energycane agroecosystems established post-intensive agriculture

As part of an integrated energy and climate system, biomass production for bioenergy based on the tropical perennial C4 grass energycane can both offset fossil fuels and store soil carbon (C). We measured energycane yields, root biomass, soil C pools, and soil C stocks in a 4 year field trial and modeled C flow from plants to soils in the surface layer of no-till energycane planted after more than a century of intensive sugarcane agriculture. Aboveground yields ranged from 16.7 to 19.0 Mg C/ha over the 4 year trial. Although total C stocks did not significantly differ in the surface layer (approx. 0–20 cm) during the study, C in free and occluded light fractions decreased, whereas C in the mineral-rich dense fraction increased over 4 years. Belowground system inputs, estimated from measurements and informed by convergence in the final soil fraction model, were set to 2.5 Mg C ha -1 year -1 . With this input value, we estimated that surface soils retained photosynthetically fixed C predominantly within the mineral-associated organic matter pool for a mean and median transit time of 177 and 110 years, respectively. Although we did not model C flow to deep soil layers (approx. 0–100 cm), observed C accumulation (11.4 Mg C ha -1 year -1 ) and root growth down to 120 cm suggest that soil processes and resulting C sequestration at the surface are likely to persist deeper into the soil profile. Energycane, as a strong candidate for climate change mitigation and land degradation remediation, showed high biomass yields and allocation of resources to roots, with sequestered soil C expected to persist for over a century.

09 BIOMASS FUELS↗
NASA NTRS1982

XPS, AES and friction studies of single-crystal silicon carbide

The surface chemistry and friction behavior of a single crystal silicon carbide surface parallel to the 0001 plane in sliding contact with iron at various temperatures to 1500 C in a vacuum of 3 x 10 nPa are investigated using X-ray photoelectron and Auger electron spectroscopy. Results show that graphite and carbide-type carbon are seen primarily on the silicon carbide surface in addition to silicon at temperatures to 800 C by both types of spectroscopy. The coefficients of friction for iron sliding against a silicon carbide surface parallel to the 0001 plane surface are found to be high at temperatures up to 800 C, with the silicon and carbide-type carbon at maximum intensity in the X-ray photoelectron spectroscopy at 800 C. The concentration of the graphite increases rapidly on the surface as the temperature is increased above 800 C, while the concentrations of the carbide-type carbon and silicon decrease rapidly and this presence of graphite is accompanied by a significant decrease in friction. Preheating the surfaces to 1500 C also gives dramatically lower coefficients of friction when reheating in the sliding temperature range of from room temperature to 1200 C, with this reduction in friction due to the graphite layer on the silicon carbide surface.

Miyoshi, K.↗
NASA NTRS2021

Experiment for Cryogenic Large-Aperture Intensity Mapping: Instrument Design

The EXperiment for Cryogenic Large-Aperture Intensity Mapping (EXCLAIM) is a balloon-borne tele-33scope designed to survey star formation in windows from the present to z=3.5. During this time, the rate of star34formation dropped dramatically, while dark matter continued to cluster. EXCLAIM maps the redshifted emission35of singly-ionized carbon lines and carbon monoxide using intensity mapping, which permits a blind and complete36survey of emitting gas through statistics of cumulative brightness fluctuations. EXCLAIM achieves high sensitivity37using a cryogenic telescope coupled to six integrated spectrometers employing kinetic inductance detectors covering38420540GHz with spectral resolving power R=512and angular resolution⇡40. The spectral resolving power and39cryogenic telescope allow the survey to access dark windows in the spectrum of emission from the upper atmosphere.40EXCLAIM will survey305 deg2in the Sloan Digital Sky Survey Stripe 82 field from a conventional balloon flight41in 2023. EXCLAIM will also map several galactic fields to study carbon monoxide and neutral carbon emission as42tracers of molecular gas. Here, we summarize the design phase of the mission.

Eric R Switzer↗
NASA NTRS2000

Abrupt Changes at the Permian/Triassic Boundary: Tempo of Events from High-Resolution Cyclostratigraphy

The Permian/Triassic (P/Tr) boundary (251.4 +/- 3 Myr) is marked by the most severe mass extinction in the geologic record. Recently, precise absolute dating has bracketed the marine extinctions and associated carbon-isotope anomaly within less than 1 Myr. We improve this resolution through high-resolution stratigraphy across the P/Tr boundary in the 331-m Gartnerkofel-1 core and nearby Reppwand outcrop section (Carnic Alps, Austria) utilizing FFT and wavelet timeseries analyses of cyclic components in down-hole core logs of density and natural gamma-ray intensity, and carbon-isotopic ratios of bulk samples. The wavelet analysis indicates continuity of deposition across the P/Tr boundary interval, and the timeseries analyses show evidence for persistent cycles in the ratio of approximately 40: 10: 4.7: 2.3 meters, correlated with Milankovitch-band orbital cycles of approximately 412: 100: 40: 20 kyr (eccentricity 1 and 2, obliquity, and precession), and giving a consistent average sedimentation rate of approximately 10 cm/1,000 yr. Milankovitch periods in delta C-13 and density in these shallow-water carbonates were most likely the result of climatically induced oscillations of sea level and climate, coupled with changes in ocean circulation and productivity, that affected sedimentation. Fluctuations in gamma radiation reflect varying input of clay minerals and the presence of shaly interbeds. Throughout the P/Tr boundary interval in the core, the 100,000-year eccentricity cycle seems to be dominant. Weaker obliquity and precession cycles are in line with the location of the Austrian section in the latest Permian, close to the Equator in the western bight of the Tethys, where obliquity and precessional effects on seasonal contrast might be subdued. Using the improved resolution provided by cycle analysis in the GK-1 core, we find that the dramatic change in the faunal record that marks the P/Tr boundary takes place over less than 6m, or less than 60,000 years. In the nearby Reppwand outcrop section, the same faunal changes occurs over only 0.8 m or about 8,000 years, close to the limit of time-resolution induced by bioturbation and reworking in these sediments. The sharp negative global carbon-isotope shift took place within less than or equal to 40,000 yr, and the isotope excursions persisted for approximately 480,000 yr into the Early Triassic. The results indicate that the severe marine faunal event that marks the P/Tr boundary was very sudden, perhaps less than the resolution window in the GK-1 core, and suggest a catastrophic cause. The wavelet-analysis approach to high-resolution cyclostratigraphy can be applied to other P/Tr boundary sections, and when combined with precise absolute dating and magnetostratigraphic methods promises a significant increase in resolution in determining the correlation and tempo of the end-Permian extinctions and related events worldwide.

Rampino, M. R.↗