Search NASA⌕ Search

SEARCH · Search NASA

Results for “Composite media”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Modeling the Impact of Grain Size on Corrosion Behavior of Ni-Based Alloys in Molten Chloride Salt via Cellular Automata

Molten chloride salts hold significant promise as both thermal transfer and storage media for next-generation concentrated solar power (CSP) systems. However, molten chlorides pose a considerable corrosion risk to structural materials, particularly Ni-based alloys. One approach to enhancing corrosion resistance is through the optimization of grain structure; however, it remains uncertain whether increasing or decreasing grain size enhances corrosion resistance. A cellular automata (CA) program was developed to evaluate the interplay between grain size and corrosion in Ni-based alloy. Our CA program tracks alloy composition, surface roughness, and thickness loss via a graphical user interface, displaying corrosion and diffusion status, and multiple user input cards for tuning the simulation. CA simulations of Inconel 625 indicate enhanced corrosion resistance with increased grain size, with passivating oxides offering limited protection. Additionally, the temporal evolution of alloy surface roughness demonstrates notable fluctuations, with abrupt increases attributed to corrosion along vertical grain boundaries and sudden decreases to grain detachment from the protective film.

Materials Science↗
DOE OSTI2020

Nanocasting SiO 2 into metal–organic frameworks imparts dual protection to high-loading Fe single-atom electrocatalysts

Single-atom catalysts (SACs) have sparked broad interest recently while the low metal loading poses a big challenge for further applications. Herein, a dual protection strategy has been developed to give high-content SACs by nanocasting SiO 2 into porphyrinic metal–organic frameworks (MOFs). The pyrolysis of SiO 2 @MOF composite affords singleatom Fe implanted N-doped porous carbon (FeSA–N–C) with high Fe loading (3.46 wt%). The spatial isolation of Fe atoms centered in porphyrin linkers of MOF sets the first protective barrier to inhibit the Fe agglomeration during pyrolysis. The SiO 2 in MOF provides additional protection by creating thermally stable FeN4/SiO 2 interfaces. Thanks to the high-density FeSA sites, FeSA–N–C demonstrates excellent oxygen reduction performance in both alkaline and acidic medias. Meanwhile, FeSA–N–C also exhibits encouraging performance in proton exchange membrane fuel cell, demonstrating great potential for practical application. More far-reaching, this work grants a general synthetic methodology toward high-content SACs (such as FeSA, CoSA, NiSA). https://doi.org/10.1038/s41467-020-16715-6 OPEN 1

36 MATERIALS SCIENCE↗
DOE OSTI2020

Paraburkholderia solitsugae sp. nov. and Paraburkholderia elongata sp. nov., phenolic acid-degrading bacteria isolated from forest soil and emended description of Paraburkholderia madseniana

Two bacterial strains, 1N T and 5N T , were isolated from hemlock forest soil using a soluble organic matter enrichment. Cells of 1N T (0.65×1.85 µm) and 5N T (0.6×1.85 µm) are Gram-stain-negative, aerobic, motile, non-sporulating and exist as single rods, diplobacilli or in chains of varying length. During growth in dilute media (≤0.1× tryptic soy broth; TSB), cells are primarily motile with flagella. At higher concentrations (≥0.3× TSB), cells of both strains increasingly form non-motile chains, and cells of 5N T elongate (0.57×~7 µm) and form especially long filaments. Optimum growth of 1N T and 5N T occurred at 25–30 °C, pH 6.5–7.0 and <0.5% salinity. Results of comparative chemotaxonomic, genomic and phylogenetic analyses revealed that 1N T and 5N T were distinct from one another and their closest related type strains: Paraburkholderia madseniana RP11 T , Paraburkholderia aspalathi LMG 27731 T and Paraburkholderia caffeinilytica CF1 T . The genomes of 1N T and 5N T had an average nucleotide identity (91.6 and 91.3%) and in silico DNA–DNA hybridization values (45.8%±2.6 and 45.5%±2.5) and differed in functional gene content from their closest related type strains. The composition of fatty acids and patterns of substrate use, including the catabolism of phenolic acids, also differentiated strains 1N T and 5N T from each other and their closest relatives. The only ubiquinone present in strains 1N T and 5N T was Q-8. The major cellular fatty acids were C 16 : 0 , 3OH-C 16 : 0 , C 17 : 0 cyclo, C 19 : 0 cyclo ω8 c and summed features 2 (3OH-C 14 : 0 / C 16 : 1 iso I), 3 (C 16 : 1 ω6 c /ω7 c ) and 8 (C 18 : 1 ω7 c /ω6 c ). A third bacterium, strain RL16-012-BIC-B, was isolated from soil associated with shallow roots and was determined to be a strain of P. madseniana (ANI, 98.8%; 16S rRNA gene similarity, 100%). Characterizations of strain RL16-012-BIC-B (DSM 110723=LMG 31706) led to proposed emendments to the species description of P. madseniana . Our polyphasic approach demonstrated that strains 1N T and 5N T represent novel species from the genus Paraburkholderia for which the names Paraburkholderia solitsugae sp. nov. (type strain 1N T =DSM 110721 T =LMG 31704 T ) and Paraburkholderia elongata sp. nov. (type strain 5N T =DSM 110722 T =LMG 31705 T ) are proposed.

Microbiology↗
DOE OSTI2022

Oxygen Evolution Reaction in Alkaline Environment: Material Challenges and Solutions

Abstract The oxygen evolution reaction (OER) generally exists in electrochemistry‐enabled applications that are coupled with cathodic reactions like hydrogen evolution, carbon dioxide reduction, ammonia synthesis, and electrocatalytic hydrogenation. The OER heavily impacts the overall energy efficiency of these devices because the sluggish OER kinetics result in a huge overpotential, thus, a large amount of efficient catalysts are needed. The benchmark iridium and ruthenium (Ir/Ru)‐based materials (mostly used in acid media) are, however, significantly limited by their scarcity. Non‐precious metal‐based catalysts (NPMCs) have emerged as the most promising alternatives; however, they tend to degrade quickly under the harsh operating conditions of typical OER devices. Another challenge is the unsatisfying performance of OER catalysts when integrated in real‐world devices. Herein, the OER active sites for three mainstream types of NPMCs including non‐precious transition metal oxides/(oxy)hydroxides, metal‐free carbon materials, and hybrid non‐precious metal and carbon composites are reviewed. In addition, possible degradation mechanisms for active sites and mitigation strategies are discussed in detail. This review also provides insights into the gaps between R&D of NPMCs for the OER and their applications in practical devices.

Xie, Xiaohong↗
DOE OSTI2023

pH dependence of brown-carbon optical properties in cloud water

Abstract. Light-absorbing organic species present in aerosols, collectively called brown carbon (BrC), have important but highly uncertain effects on climate. Clouds likely represent a significant medium for secondary BrC production and for bleaching reactions, though the relative importance of the formation and loss processes in clouds is unknown at present. The acidity (or pH) of atmospheric particles and clouds affects the optical properties of BrC and bleaching rates. Given the wide variability of pH in the atmosphere (pH in particles and clouds ranges from −1 to 8), the optical properties of BrC and its bleaching behavior are expected to vary significantly, and the link between pH and BrC is yet another uncertainty in attempts to constrain its climate forcing effects. In this work, we characterize the pH dependence of BrC optical properties – including light absorption at 365 nm (Abs365), the mass absorption coefficient (MAC365), and the absorption Ångström exponent (AAE) – in bulk cloud water sampled from the summit of Whiteface Mountain, NY. In all samples (n=17), Abs365 and MAC365 increased linearly with increasing pH, highlighting the importance of reporting pH in studies of BrC in aqueous media. There was strong variability in the sensitivity of Abs365 to pH, with normalized slopes that ranged from 5.1 % to 17.2 % per pH unit. The normalized slope decreased strongly with increasing cloud water [K+], suggesting that the non-biomass-burning BrC has optical properties that are more sensitive to pH than BrC associated with biomass burning. AAE also showed a distinct pH dependence as it was relatively flat between pH 1.5–5 and then decreased significantly above pH 5. The cloud water composition was used to inform thermodynamic predictions of aerosol pH upwind and/or downwind of Whiteface Mountain and the subsequent changes in BrC optical properties. Overall, these results show that, in addition to secondary BrC production, photobleaching, and the altitudinal distribution, the climate forcing of BrC is quite strongly affected by its pH-dependent absorption.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Stability and Activity of Cobalt Antimonate for Oxygen Reduction in Strong Acid

Guided by computational Pourbaix screening and high-throughput experiments aimed at the development of precious-metal-free fuel cells, we investigate rutile CoSb 2 O 6 as an electrocatalyst for oxygen reduction in 1 M sulfuric acid. Following 4 h of catalyst conditioning at 0.7 V vs RHE, operation at this potential for 20 h yielded an average current density of –0.17 mA cm –2 with corrosion at a rate of 0.04 nm hour –1 that is stoichiometric with catalyst composition. Surface Pourbaix analysis of the (111) surface identified partial H coverage under operating conditions. The Sb active site has an HO* binding free energy of 0.49 eV, which is near the peak of the kinetic 4e – ORR volcano for transition-metal oxides in acidic conditions. Furthermore, the experimental demonstration of operational stability and computational identification of a reaction pathway with favorable energetics place rutile CoSb 2 O 6 among the most promising precious-metal-free electrocatalysts for oxygen reduction in acidic media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Fungal elemental profiling unleashed through rapid laser-induced breakdown spectroscopy (LIBS)

ABSTRACT Elemental profiling of fungal species as a phenotyping tool is an understudied topic and is typically performed to examine plant tissue or non-biological materials. Traditional analytical techniques such as inductively coupled plasma–optical emission spectroscopy (ICP-OES) and inductively coupled plasma–mass spectrometry (ICP-MS) have been used to identify elemental profiles of fungi; however, these techniques can be cumbersome due to the difficulty of preparing samples. Additionally, the instruments used for these techniques can be expensive to procure and operate. Laser-induced breakdown spectroscopy (LIBS) is an alternative elemental analytical technique—one that is sensitive across the periodic table, easy to use on various sample types, and is cost-effective in both procurement and operation. LIBS has not been used on axenic filamentous fungal isolates grown in substrate media. In this work, as a proof of concept, we used LIBS on two genetically distinct fungal species grown on a nutrient-rich and nutrient-poor substrate media to determine whether robust elemental profiles can be detected and whether differences between the fungal isolates can be identified. Our results demonstrate a distinct correlation between fungal species and their elemental profile, regardless of the substrate media, as the same strains shared a similar uptake of carbon, zinc, phosphorus, manganese, and magnesium, which could play a vital role in their survival and propagation. Independently, each fungal species exhibited a unique elemental profile. This work demonstrates a unique and valuable approach to rapidly phenotype fungi through optical spectroscopy, and this approach can be critical in understanding these fungi's behavior and interactions with the environment. IMPORTANCE Historically, ionomics, the elemental profiling of an organism or materials, has been used to understand the elemental composition in waste materials to identify and recycle heavy metals or rare earth elements, identify the soil composition in space exploration on the moon or Mars, or understand human disorders or disease. To our knowledge, ionomic profiling of microbes, particularly fungi, has not been investigated to answer applied and fundamental biological questions. The reason is that current ionomic analytical techniques can be laborious in sample preparation, fail to measure all potential elements accurately, are cost-prohibitive, or provide inconsistent results across replications. In our previous efforts, we explored whether laser-induced breakdown spectroscopy (LIBS) could be used in determining the elemental profiles of poplar tissue, which was successful. In this proof-of-concept endeavor, we undertook a transdisciplinary effort between applied and fundamental mycology and elemental analytical techniques to address the biological question of how LIBS can used for fungi grown axenically in a nutrient-rich and nutrient-poor environment.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2003

NASA's Earth Observatory and Visible Earth: Imagery and Science on the Internet

The purpose of NASA s Earth Observatory and Visible Earth Web sites is to provide freely-accessible locations on the Internet where the public can obtain new satellite imagery (at resolutions up to a given sensor's maximum) and scientific information about our home planet. Climatic and environmental change are the sites main foci. As such, they both contain ample data visualizations and time-series animations that demonstrate geophysical parameters of particular scientific interest, with emphasis on how and why they vary over time. An Image Composite Editor (ICE) tool will be added to the Earth Observatory in October 2002 that will allow visitors to conduct basic analyses of available image data. For example, users may produce scatter plots to correlate images; or they may probe images to find the precise unit values per pixel of a given data product; or they may build their own true-color and false-color images using multi- spectral data. In particular, the sites are designed to be useful to the science community, public media, educators, and students.

King, Michael D.↗
DOE OSTI2025

Unsteady- and Steady-State Relative Permeability Study with X-ray and Acoustic Monitoring for CO 2 Storage in Deep Saline Aquifers

In this study, we link the multiphase flow measurements with controls of sedimentary structures (e.g., heterogeneity and anisotropy) on relative permeability to variations in ultrasonic velocities for two deep saline aquifer formations (Entrada and Bluff Sandstones) in the San Juan Basin of the Southwestern USA. The rock specimens were extracted from outcrop sites near Durango, CO, USA. They have distinct differences in grain size, cementation composition, and individual chemical amounts, despite both formations being eolian sandstones. We performed a series of unsteady- and steady-state CO 2 -brine relative permeability experiments under capillary-controlled displacement rates. Unsteady-state experiments were conducted at 71 °C and 9.65 MPa; steady-state experiments were conducted at 85 °C and 22.8 MPa and 89 °C and 24.1 MPa for the Bluff and Entrada Sandstones, respectively. During the unsteady experiments, X-ray computed tomography was used to visualize multiphase flow in porous media and quantify saturations during brine drainage under various flow rates. Scan images and saturation profiles indicate that the CO 2 distribution in the pore volume was strongly impacted by the presence of high-angle cross-laminations, heterogeneous rock structure, and direction of bedding orientation. Those factors contribute to dramatic and quick initial breakthroughs and affect the overall saturation dynamics. Steady-state relative permeability tests were conducted at net flow rates of 1 mL/min for both brine drainage and imbibition. During the experimental steps, the CO 2 fractional flow was increased and decreased for both drainage and imbibition scenarios to mimic the front when CO 2 contacts brine and behind the front when brine enters space previously occupied by CO 2 . It was found that compressional velocity decreased, while shear waves slightly increased as brine saturation decreased. The hysteresis effects for the relative permeability and acoustic velocities were distinct. Furthermore, the CO 2 /brine front stability is quantified by applying a mobility ratio approach to spot saturations at which the boundary line between fluids becomes uneven. The results presented in this work can potentially boost the quality and precision of forecasts for the CO 2 storage projects in which the vertical and horizontal core-scale heterogeneity and anisotropy impact the plume migration within host reservoirs.

carbon dioxide (CO2)↗
DOE OSTI2026

Reactive CO 2 capture via controlled amine speciation in non-aqueous electrolytes

Current efforts to integrate CO 2 capture and electrochemical conversion (reactive capture) are often performed under aqueous conditions, resulting in undesired hydrogen evolution and reliance on precious metal catalysts and pure CO 2 streams. Here, in this study, we explore reactive capture in aprotic media. By shifting the amine–CO 2 adduct speciation to carbamic acid (instead of carbamate) in dimethyl sulfoxide, we increased CO 2 uptake threefold compared with an aqueous medium, suppressing hydrogen evolution and supporting a 78% Faradaic efficiency towards CO over an earth-abundant zinc catalyst. Under simulated high-oxygen-content flue gas (17% CO 2 , 17% O 2 , 66% N 2 ), we also obtained up to 43% CO Faradaic efficiency over multiple capture–conversion cycles. Our findings showcase the confluence of reactant speciation, electrolyte composition and electrocatalyst design in enabling selective and active electrochemical transformations.

Gomes, Reginaldo J. [Univ. of Chicago, IL (United ↗
NASA NTRS1997

Biodiversity within hot spring microbial mat communities: molecular monitoring of enrichment cultures

We have begun to examine the basis for incongruence between hot spring microbial mat populations detected by cultivation or by 16S rRNA methods. We used denaturing gradient gel electrophoresis (DGGE) to monitor enrichments and isolates plated therefrom. At near extincting inoculum dilutions we observed Chloroflexus-like and cyanobacterial populations whose 16S rRNA sequences have been detected in the 'New Pit' Spring Chloroflexus mat and the Octopus Spring cyanobacterial mat. Cyanobacterial populations enriched from 44 to 54 degrees C and 56 to 63 degrees C samples at near habitat temperatures were similar to those previously detected in mat samples of comparable temperatures. However, a lower temperature enrichment from the higher temperature sample selected for the populations found in the lower temperature sample. Three Thermus populations detected by both DGGE and isolation exemplify even more how enrichment may bias our view of community structure. The most abundant population was adapted to the habitat temperature (50 degrees C), while populations adapted to 65 degrees C and 70 degrees C were 10(2)- and 10(4)-fold less abundant, respectively. However, enrichment at 70 degrees C favored the least abundant strain. Inoculum dilution and incubation at the habitat temperature favored the more numerically relevant populations. We enriched many other aerobic chemoorganotrophic populations at various inoculum dilutions and substrate concentrations, most of whose 16S rRNA sequences have not been detected in mats. A common feature of numerically relevant cyanobacterial, Chloroflexus-like and aerobic chemorganotrophic populations, is that they grow poorly and resist cultivation on solidified medium, suggesting plating bias, and that the medium composition and incubation conditions may not reflect the natural microenvironments these populations inhabit.

Non-NASA Center↗
DOE OSTI2022

Improvement of Oxygen Reduction Performance in Alkaline Media by Tuning Phase Structure of Pd–Bi Nanocatalysts

Tuning the crystal phase of bimetallic nanocrystals offers an alternative avenue to improving their electrocatalytic performance. Herein, we present a facile and one-pot synthesis approach that is used to enhance the catalytic activity and stability toward oxygen reduction reaction (ORR) in alkaline media via control of the crystal structure of Pd-Bi nanocrystals. By merely altering the types of Pd precursors under the same conditions, the monoclinic structured Pd 5 Bi 2 and conventional face-centered cubic (fcc) structured Pd 3 Bi nanocrystals with comparable size and morphology can be precisely synthesized, respectively. Interestingly, the carbon-supported monoclinic Pd 5 Bi 2 nanocrystals exhibit superior ORR activity in alkaline media, delivering a mass activity (MA) as high as 2.05 A/mg Pd . After 10,000 cycles of ORR durability test, the monoclinic structured Pd 5 Bi 2 /C nanocatalysts still remain a MA of 1.52 A/mg Pd , which is 3.6 times, 16.9 times, and 21.7 times as high as those of the fcc Pd 3 Bi/C counterpart, commercial Pd/C, and Pt/C electrocatalysts, respectively. Moreover, structural characterizations of the monoclinic Pd 5 Bi 2 /C nanocrystals after the durability test demonstrate the excellent retention of the original size, morphology, composition, and crystal phase, greatly alleviating the leaching of the Bi component. Overall, this work provides new insight for the synthesis of multimetallic catalysts with a metastable phase and demonstrates phase-dependent catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Manipulation of amorphous precursors to enhance zeolite nucleation

Crystallization in media comprised of amorphous precursors is becoming a more common phenomenon for numerous synthetic, biological, and natural materials that grow by a combination of classical and nonclassical pathways. Amorphous phases can exhibit a wide range of physicochemical properties that may evolve during the course of nucleation and crystal growth. This creates challenges for establishing causal relationships between amorphous precursor properties and their effect(s) on the selection of mechanistic pathways of crystallization and ultimately the properties of the crystalline product. In this study, we examine ways to manipulate the composition and colloidal stability of amorphous (alumino)silicate precursors that are prevalent in nanoporous zeolite syntheses. Changes in the amorphous precursor properties are evaluated on the basis of their ability to enhance rates of crystal formation. Here, we use fumed silica as the primary silicon source and examine the effects of infusing the source or growth medium with additional alkali metal, which serves as an inorganic structure-directing agent to facilitate the formation of porous crystal structures. We also assess the impact of adding a polymer additive, which reduces the colloidal stability of precursors, wherein we posit that the confined pockets of solution within the interstitial spaces of the precursor aggregates play an important role in regulating the rate of zeolite crystallization. Three commercially relevant zeolites (mordenite, SSZ-13, and ZSM-5) were selected for this study based on their diverse frameworks and methods of preparation. Here our findings reveal that alkali infusion significantly reduces the crystallization times for mordenite and SSZ-13, but has little impact on ZSM-5 synthesis. Conversely, we find that polymer addition markedly enhanced the rates of crystallization among all three zeolites, suggesting that this method may be a general approach to reduce zeolite synthesis times. Given the relatively high costs associated with commercial zeolite production, identifying new methods to improve the efficiency of hydrothermal syntheses can have significant practical implications beyond the fundamental benefits of developing new routes to tailor nonclassical crystallization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

High-Temperature Reference Electrode for Chloride Salts

The unique properties of molten salts enable their use in a wide range of applications, including metal electrodeposition, electrorefining, and as electrolytes in high-temperature batteries. Moreover, molten salts will be used as a coolant in molten salt reactors and as working media in pyrorocessing for nuclear energy applications. As a result, predicting the behavior and properties of the elements involved in the technological processes that employ molten salts is important. The activity of chloride ions in chloride molten salts has a large influence on the behavior of the salts in these applications and one of the key components in measuring the chloride activity is a stable reference electrode. This project aims to develop a reliable and convenient method for measuring chloride ion activity over a wide range of temperatures and salt compositions in chloride salt mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Coupling of high-resolution mass spectrometer and photosynthesis system for comprehensive leaf volatile metabolite profiling

Background Leaf-level biogenic volatile organic compounds (BVOCs) emissions represent a major source of organic gases in the atmosphere, influencing both climate and air quality. These emissions are strongly driven by environmental perturbations, which affect individual plant- to ecosystem-level processes. Uncovering all the BVOCs and understanding how their emissions respond to altered environmental conditions provide critical insights into vegetation-driven changes in atmospheric chemistry. We developed a tandem instrumentation setup that integrates a proton transfer reaction time-of-flight mass spectrometer (PTR-ToF-MS) with parts-per-trillion detection limits and a photosynthetic infrared gas exchange system for the untargeted survey of all the BVOCs. This novel system enables simultaneous, real-time monitoring of BVOC emissions and photosynthetic parameters at the leaf level, offering new opportunities to disentangle the physiological and environmental drivers of VOC release. Furthermore, we established the VOC Analysis and Processing Optimization Resource (VAPOR), an open-access software tool designed for rapid data post-processing and the analysis of the variability of hundreds of BVOCs. We assessed the performance of the tandem system under varying background conditions, using standard gas mixtures and a range of environmental factors. Results Blank emissions were substantially lower for major BVOCs (e.g., isoprene) compared to those observed in plant emissions. Despite this, the observation of background-level VOCs highlights the importance of routinely acquiring and accounting for blank measurements in analyses using the coupled instrumentation. Introduction of known VOC concentrations to the system demonstrated a linear response across different compounds with varying molecular compositions, indicating minimal gas loss regardless of chemical moieties within the coupled instrumentation. We applied the optimized system to investigate the physiological mechanisms driving BVOC emissions across different genotypes of poplar and pennycress. The high mass resolution capabilities of the PTR-ToF-MS, coupled with comprehensive VAPOR-driven data analysis, enabled the identification of several important BVOCs, including methanol and methanethiol; these BVOCs displayed substantial variation across pennycress genotypes and showed concentrations ~ 100–350% higher than the blank. Moreover, isoprene emissions varied significantly among poplar genotypes grown in different potting media. Conclusions Tandem instrumentation offers a powerful tool for profiling volatile molecular markers and elucidating their genetic and environmental underpinnings. This approach enhances our ability to predict BVOC emissions in response to genotype by environmental interactions and contributes to a deeper understanding of vegetation responses to environmental changes.

Biogenic volatile organic compounds↗
DOE OSTI2020

Performance Evaluation of AG-1 FC HEPA Filters and Medium in Nuclear Complex Facilities - 20434

High Efficiency Particulate Air (HEPA) filters are credited as the final barrier against the release of radioactive aerosol contamination in nearly every operating U. S. Department of Energy (DOE) and National Nuclear Security Agency (NNSA) nuclear facility. The Institute for Clean Energy Technology (ICET) at Mississippi State University maintains a research program that studies various aspects of these components of containment systems and seeks to answer key questions from across the industry. This programmatic overview will include results from recent and ongoing studies, including a study on filter design and performance envelope, degradation due to aging or fatigue, fire event impact on HEPA filters, and accelerated aging of medium and component parts. ICET has completed a study helping to define the threshold for combined elevated temperature and relative humidity resistance of separator style and separator-less style HEPA filters that are used in DOE complexes. The study provides experimental data that considers elevated temperature, elevated relative humidity (RH), and target differential pressure (dP) in an attempt to gain a better understanding or more comprehensive insight into the operating envelope of different configurations of ASME (American Society for Mechanical Engineers) AG-1 Section FC filters. Test variables including air temperature ranges of 48.88 deg. C, 54.44 deg. C, or 60 deg. C (120, 130, or 140 deg. F); air RH ranges including 60-70%, 80%, or 90+% with initial filter dP of either 497.68 Pa, 746.52 Pa, or 995.36 Pa (2 inches water column (in. w. c.), 3 in. w. c., or 4 in. w. c.) included for full bracketing of each set of conditions. A study examining the effects of aging and fatigue on nuclear grade HEPA filters and medium elucidates the physical properties of media along with testing of new and aged ASME AG-1 HEPA filters. In addition to performing autopsies of the tested, aged filters to help better understand the service life of their performance, newly designed accelerated aging chambers allow new medium to undergo accelerated aging and exposure treatments. Evaluation of degradation in physical properties and functionality requires a high population of aged filters of different ages, designs, manufacturers, and operational histories. The limited availability of this population and the impropriety of looking solely at formulations and components from past years requires experimental design that will provide foresight into future filter performance. This undertaking therefore involves not only properties analysis of aged medium from different operational histories, ages, designs, and manufacturers, but also prescience in analytical goals via accelerated aging studies of newly manufactured media. A more complete understanding of the mechanisms of degradation from past formulations as well as current and future formulations is possible. Accelerated Aging of newly manufactured media utilizes exposure treatments based on the Arrhenius equation to artificially age medium and therefore glimpse into the future. Evaluation of current media properties This testing allows for the comparison of performance and durability of new filters under upset or design basis conditions with aged filters that were in service under ambient conditions and other aged filters retained in storage. Susceptibility of HEPA filters to the effects of combustion byproducts, heat, and water is also being studied in an attempt to gain understanding on the prevention of filter failures during fire events in nuclear facilities. ICET seeks to determine the effect of filter performance due to smoke loading using characterized smoke from variable fuel compositions, geometries, and loads; the smoke capacity of various filters with different burning conditions, heat release rates and transport, as well as mass transport from the air stream will be studied in low flow containment systems. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

A review of fluids under nanoconfinement: Reactivity, geomechanics, phase transitions, and flow

Due to its many industrial applications, the physics associated with the nanoconfinement of fluids has garnered great attention from the scientific community in roughly the last fifteen years. One pioneer of that research has been the Multi-Scale Fluid-Solid Interactions in Architected and Natural Materials (MUSE) Energy Frontier Research Center, which produced more than 50 journal articles from 2018 to 2023. We structure the findings of MUSE into four categories and contextualize the work with the broader literature. Here, the four categories are (1) the dependence of chemical reactions on the degree of confinement, which given the lower freedom of motion of molecules yet improved availability of reaction sites generally lead to enhancement from bulk reactions; (2) the mechanical properties of the porous matrix, which are dependent on the heterogeneity of the system in terms of both composition and structure; (3) the phase transitions under nanoconfinement, which are influenced by the pore size and morphology, surface chemistry, and substrate composition; and (4) the physical controls of slip flow, which demonstrate the importance of several factors, such as wettability. These aspects of nanoconfinement are becoming clearer, but there are other elements such as mathematical theory that are still being developed.

58 GEOSCIENCES↗
NASA NTRS1973

A satellite measurement of cosmic-ray abundances and spectra in the charge range 2 less than or equal to 7 less than or equal to 10

The composition of the nuclear component of the cosmic radiation was studied to yield information concerning the source, propagation, and confinement of cosmic rays within the galaxy. The first comprehensive satellite measurement is presented of cosmic-ray composition and spectra in the charge range 2 equal to or less than Z equal to or less than 10 using the geomagnetic field as a rigidity analyzer through the entire range of vertical cutoffs. The results indicate that the spectra of all the elements in the observed range are similar, and thus that various ratios of elemental abundances are nearly independent of rigidity over the range 2 equal to or less than P equal to or less than 15 GV. Calculations of the propagation of cosmic rays through the interstellar and interplanetary media predict that there should be a variation with rigidity of ratios of various elements, because of the charge-dependent effects of ionization of the interstellar gas by the cosmic rays. The absence of this variation can be explained by assuming a rigidity-dependent confinement of the cosmic rays in the galaxy.

Brown, J. W.↗